Wine (error x create window)

After on of the updates I noticed that the wine doesn't run any games. Meanwhile, almost all programs (with rare exceptions) work perfectly.
This error occurs when the game tryes to draw its window, with the wine gives the corresponding error. Something like "x create window error"
First time I noticed that some months ago. Since those time I tryed to reinstall wine, remove .wine, and even reinstall system (not because of wine). No one of these things does not help.

Can you post your system info under the help menu?
Give any more details on what you are doing before it happens?

Similar Messages

Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.

In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Error in creating windows 8.1 VMs from templates

hello experts,
I have created a template on Windows 8.1 on SCVMM 2012 R2 (OS:Windows Server 2012) ,Now am try to create a Windows 8.1 VM on another Hyper-v Host where Windows Server 2012 r2 is installed but creation has got failed with error in job list :
Error (2915)
The Windows Remote Management (WS-Management) service cannot process the request. The object was not found on the server (hyper-v host name .com).
WinRM: URL: [http://hyper-v host name.com:5985], Verb: [GET], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/virtualization/v2/Scvmm_EthernetSwitchPortInternalSettingData?InstanceID=Microsoft:Definition\1f59a509-a6ba-4aba-8504-b29d542d44bb\Default]
Unknown error (0x80338000)
Recommended Action
Ensure that the VMM agent is installed and running. If the error persists, restart the virtualization server (hypr-v host name.com) and then try the operation again.
This error can also happen due to an older version of the VMM agent on the virtualization server. Ensure that the VMM agent is upgraded to the latest version, and then try the operation again.
please help me to resolved the issues and use created windows 8.1 templates for deploy VMs on Windows server 2012 r2 Hyper-V host.
Regards
Richa KM

I am running with an idea here that the key is here: Scvmm_EthernetSwitchPortInternalSettingData
Your virtual port profile. You are defining a setting that does not exist. (I am guessing at this since the only thing is an error message).
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Error While creating Domain offline in windows...

I am trying to create a domain in windows using my scripts which i use in unix. But i am getting the following error. Here i am using Ant /build.xml/ and domain.properties( in this i pass the details) Please help....
C:\scripts>setenv
C:\scripts>set WEBLOGIC_HOME=C:\bea\wlserver_10.3
C:\scripts>set BEA_HOME=C:\bea
C:\scripts>set WORK_DIR=C:\wldomains
C:\scripts>set DOMAIN_HOME=C:\wldomains
C:\scripts>call "C:\bea\wlserver_10.3\server\bin\setWLSEnv.cmd"
CLASSPATH=C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_
patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_p
atch.jar;C:\bea\JROCKI~1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.
jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.s
erver.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\m
odules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.ja
r;.;C:\Program Files\QuickTime\QTSystem\QTJava.zip
PATH=C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\d
efault\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bi
n;C:\bea\modules\ORGAPA~1.5\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\o
racle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Syst
em32\Wbem;C:\Program Files\Windows Imaging\;C:\Program Files\Perforce;C:\Program
Files\QuickTime\QTSystem;c:\ant\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci9
20_8
Your environment has been set.
C:\scripts>ant clean
Buildfile: build.xml
identify-os:
init:
clean:
[delete] Deleting directory C:\scripts\build
BUILD SUCCESSFUL
Total time: 1 second
C:\scripts>ant setup-domain
Buildfile: build.xml
identify-os:
init:
[mkdir] Created dir: C:\scripts\build
init-domain-env:
setup-domain:
identify-os:
init:
init-domain-env:
config-domain:
identify-os:
init:
init-domain-env:
backup-domain:
identify-os:
init:
init-domain-env:
delete-domain:
[echo] Deleting domain 'C:\wldomains\pdc2' ...
[echo] Configuring WebLogic 10.3 domain (offline mode) ...
identify-os:
init:
run-wlst-script:
[echo] Running WLST script 'C:\scripts\wlst\offline\config-domain.py' ...
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading configuration properties ...
[java] [I] Reading the domain template ...
[java] [I] Configuring the domain ...
[java] [I] Configuring domain 'pdc2' ...
[java] [I] Creating log mbean for 'Domain' : 'pdc2' ...
[java] [I] Configuring the admin user ...
[java] [I] Configuring admin user 'system' ...
[java] [I] Configuring the admin server ...
[java] [I] Configuring admin server 'myserver' ...
[java] [I] Renaming server 'AdminServer' to 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Creating log mbean for 'Server' : 'myserver' ...
[java] [I] Creating SSL for server 'myserver' ...
[java] [I] Creating WebServer for server 'myserver' ...
[java] [I] Creating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring machines ...
[java] [I] Configuring clusters ...
[java] [I] Configuring servers ...
[java] [I] Configuring servers 'myserver' ...
[java] [I] Configuring server 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Updating log mbean for 'Server' : 'myserver' ...
[java] [I] Updating SSL for server 'myserver' ...
[java] Error: setListenPort() failed. Do dumpStack() to see details.
[java] [I] Updating WebServer for server 'myserver' ...
[java] [I] Updating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring startup classes ...
[java] [I] Configuring shutdown classes ...
[java] [I] Configuring mail sessions ...
[java] [I] Setting domain options ...
[java] [I] Setting overwrite domain to 'true'
[java] [I] Setting create start menu to 'false'
[java] [I] Setting java home to 'C:/beajdk160_05'
[java] [I] Setting server start mode to 'dev'
[java] [I] Saving the domain configuration ...
[java] Error: writeDomain() failed. Do dumpStack() to see details.
[java] [I] Closing the domain template ...
[java] [I] Reading the domain configuration ...
[java] Error: readDomain() failed. Do dumpStack() to see details.
[java] [I] Configuring JDBC ...
[java] [I] Configuring JDBC system resources 'CPoolDS,EPoolDS,poswotDataSou
rce,MainTxDataSource,AdditionalTxDataSource,PDC1PoolDS,urgentMessageDataStore,Us
rFriendlyDescPoolDS' ...
[java] [I] Configuring JDBC system resource 'CPoolDS' ...
[java] Error: No domain or domain template has been read.
[java] Problem invoking WLST - Traceback (innermost last):
[java] File "C:\scripts\wlst\offline\config-domain.py", line 149, in ?
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 35, in configJD
BCSystemResources
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 51, in configJD
BCSystemResource
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 97, in hasJDBCS
ystemResource
[java] File "C:\scripts\Lib\script\common\wlstutils.py", line 99, in chec
kPath
[java] TypeError: string member test needs char left operand
BUILD FAILED
C:\scripts\build.xml:20: The following error occurred while executing this line:
C:\scripts\build.xml:431: The following error occurred while executing this line
C:\scripts\build.xml:743: Java returned: 1
Total time: 10 seconds

Hai,
After doing snapshot my application was created and even in fdm also i found error while creating application(hint:cache not found) but now everything is fine don't know what exactly the error may be but now i am facing 404 error while doing Assign Access control in shared services console what may be the reason did anyone experienced this error if so please provide me the solution.
Edited by: 940022 on Jun 15, 2012 3:50 AM
Edited by: 940022 on Jun 15, 2012 3:51 AM

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

ORA-12571 error while creating packages from Windows clients

Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, K

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

Error creating window handle and out of memory

Hello everyone !
I am having a .Net Windows application (VB.Net) that creates a lot of reports (the same report document for different clients and dates) for exporting them to PDF.
While the first 75 reports are performed well the 76th report causes an error while creating the window handle and I get an out of memory error as well.
Searching this forum and the internet I tried a lot of things to get this problem solved:
- closing, disposing any report as well as setting it to nothing after exporting it to disk (also doing this for used dataset and datatable)
- doing a single report operation in an own class that is set to nothing immediately after use
- using garbage collector (methods: "Collect" and "WaitForPendingFinalizers")
- defining the report, used dataset and datable within "using .. end using" blocks
- take a single report object for all exports (implemented as singleton)
- using a background thread to handle report and operation on it
- changing registry entry "PrintJobLimit" to an higher value as well as to -1
But none of my tries helped me so far, it's always the 76th report that collapses.
Interesting thing: Exporting as PDF is not needed for causing the error (switched this off for all reports to test any difference).
My system:
- Visual Studio 2008 and .Net 3.5 Service Pack 1
- Crystal Reports Basic for Visual Studio 2008 Service Pack 1
Any help is appreciated.
Thank You very much,
M.Deister
Edited by: M.Deister on Sep 20, 2011 2:17 PM

Hello,
Saving the report as RPT doesn't save the data which is why it's failing to log on, you have to export it to RPT format, then use that in your test.
Also, I assume you are using the Report Engine. Try using InProc RAS to load and run the report.
Just a few lines of code change is all it needs.
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.ReportAppServer.CommonControls;
using CrystalDecisions.ReportAppServer.CommLayer;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.ObjectFactory;
using CrystalDecisions.ReportAppServer.DataSetConversion;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportSource;
using CrystalDecisions.Windows.Forms;
     public class frmMain : System.Windows.Forms.Form
        CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
        CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rptClientDoc;
private void btnOpenReport_Click(object sender, System.EventArgs e)
    rptClientDoc = new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument(); // ReportClientDocumentClass();
    openFileDialog.Filter = "Crystal Reports (*.rpt)|*.rpt|Crystal Reports Secure (*.rptr)|*.rptr";
    //openFileDialog1.Filter = "txt files (*.txt)|*.txt|All files (*.*)|*.*";
    openFileDialog.FilterIndex = 1;
    //rptClientDoc.MinorVersion();
     if (openFileDialog.ShowDialog() == DialogResult.OK)
          object rptName = openFileDialog.FileName;
        try
            rpt.Load(rptName.ToString(), OpenReportMethod.OpenReportByTempCopy);
            rptClientDoc = rpt.ReportClientDocument;
            btnReportName.Text = rptName.ToString();
            //btnReportName.Text = rptClientDoc.DisplayName.ToString();
        catch (Exception ex)
            MessageBox.Show("ERROR: " + ex.Message);
            return;
        rptClientDoc = rpt.ReportClientDocument;
Don

Unrecognized Windows Sockets error: 10106: create

Am getting the following error when I use tcp-mon to sniff the HTTP traffic. Same when I use SOAP-UI.
I'm using windows 7 and using "jdk1.6.0_13". Any help on this pls .
java.net.SocketException: Unrecognized Windows Sockets error: 10106: create
at java.net.Socket.createImpl(Socket.java:388)
at java.net.Socket.<init>(Socket.java:362)
at java.net.Socket.<init>(Socket.java:180)
at org.apache.ws.commons.tcpmon.SocketWaiter.halt(SocketWaiter.java:98)
at org.apache.ws.commons.tcpmon.Listener.stop(Listener.java:543)
at org.apache.ws.commons.tcpmon.SocketWaiter.run(SocketWaiter.java:87)

Winsock error 10106. 8 seconds in Google. Looks like something wrong with your operating system installation.

Error in creating Failover Clutser - Windows Server 2012 R2

Hello,
I have created a single node Failover Cluster in Windows Server 2012 R2. When I am trying to add second node to this cluster, it gives the error: “Cluster
service on node Node1did not reach the running state. The error code is 0x5b4. For more information check the cluster log and the system event log from node Node1. This operation returned because the timeout period expired.
The server 'Node1.mydomain.com' could not be added to the cluster.
An error occurred while adding node 'Node1.mydomain.com' to cluster 'My_Cluster'.
This operation returned because the timeout period expired.”
I have attached the screenshots of Event ID.
Firewalls are turned off on both servers (Node1 and Node2). I have successfully created single node clusters on both servers, but when I try to add second node, it
gives error.
Before starting the creation of new cluster I don't forget to Destroy previous cluster and run "Clear-ClusterNode".
Every time they successfully pass the Validate Configuration Test, but give the error on creating failover cluster.
I'm using the service account which has full permissions on CNU and both nodes, plus it has permissions to create computer accounts in AD.
Can anyone please help?
Thank you.
Best regards,
Hasan Bin Hasib

Thank you fellows!
The issue just resolved when I moved the Node1 and Node2 on the same host, and the cluster was successfully created.
After the creation of cluster, as soon as I moved the Node2 to some other host, then the Failover Cluster Manager console started showing Node2 is Down. Error: Cluster node Node2 could not to join the cluster because it failed
to communicate over the network with any other node in the cluster. Verify the network connectivity and configuration of any network firewalls. Event ID: 1653
IP Address of Node1: 172.16.1.186 ; IP Address of Node2: 172.16.1.187
And yes, the ‘Microsoft Failover Cluster Virtual Adapter Performance Filter’ is already disabled on all virtual adapters. All firewalls are disabled, no antivirus installed. I’m using same type of NICs.
I don’t know where the blockage is, and I am badly stuck. Please help.
Thank you.
~ Hasan Bin Hasib

Fit Image CS4: Error: Unable to create Window - OS error [1400]:210

Hi there,
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210
I can see that the script is in the Presets/Scripts directory OK. Anyone with any ideas please?

Thanks for that reply. I tried this again and it's working now. The only thing I can think of is that I have closed and opened Photoshop a number of times since having the problem and that may have fixed it.
I find that if I am doing a lot of work in quick mask mode on large images with the pen tool, after a while, Photoshop starts to develop a very significant lag time, taking a number of seconds to draw the next point or respond to the tool (I'm on Vista 64 bit with 12 GBs of RAM, so it shouldn't be RAM, GeForce 8800 GTS video card 640MB dedicated video memory). I find that I have to frequently close Photoshop to get the tool response time back to normal. Perhaps the inability to draw a dialog box was somehow linked with this kind of problem....

My photomerge not responding and there is an error that says error 1: unable to create window.

photomerge not responding and there is an error that says error 1: unable to create windows. Internal error. line 364. var w = new windows (res)
Any help is highly appreciated.
The problem was solve by installing my PhotoShop Elements 9. I don't know why.
Ray

Signing in with a new ID creates a new iCloud account. However, each device is limited in the number of iCloud accounts that it is allowed to create. Once you reach that limit, you cannot create another account. All you can do is re-use one of the accounts previously created, or create a new account to use on another iOS device or Mac (running OS X Lion or higher), if you have one.

Create Window Error

Hi,
Sometimes I get this error message:
"Error 1 : Unable to create Window - OS Error : [1400]".
Photoshop cannot create a panel and I have this error message with all the scripts, but it works after having restarted Photoshop.
Do you know why ?
Thanks

Can you post your system info under the help menu?
Give any more details on what you are doing before it happens?

Error while creating new application in windows client

Hai Experts,
I am experiencing an error while creating a new application in HFM
Error Reference number: {F6BA937D-6CBC-486C-800C-57DAB415C5EE}
NUM:0X80040225;TYPE:1;DTIME:6/12/2012 10:52:48 AB;SVR; STATION31; FILE: CHSXSERVERIMP1: CPP; LINE:3537;VER:11.1.1.3.0.2413;
Please reply me it's urgent.

Hai,
After doing snapshot my application was created and even in fdm also i found error while creating application(hint:cache not found) but now everything is fine don't know what exactly the error may be but now i am facing 404 error while doing Assign Access control in shared services console what may be the reason did anyone experienced this error if so please provide me the solution.
Edited by: 940022 on Jun 15, 2012 3:50 AM
Edited by: 940022 on Jun 15, 2012 3:51 AM

Satellite C55T - Windows 10 media creation tool closes after Creating Windows 10 Media

This morning I was trying to do a Windows 10 upgrade on our Satellite C55T using the media creation tool at - https://www.microsoft.com/en-us/software-download/windows10 After reaching 100% of the upgrade point of "Creating Windows 10 Media" the program just closes completely and nothing else happenes, no error message, just closes like I never started it to begin with. I tried running the program again and the same thing happens. Hopefully someone knows of a solution to this, any ideas anyone ? Thanks !

ok, not being extremely familiar with messing with ISO files I finally realized what I was doing wrong. I had originally downloaded the Win 10 ISO file direct to a DVD and it would not install, then I realized I needed to download it to the hard drive and then burn it onto a DVD. Once I did that I was able to install it on that computer successfully ! This method (ISO download) was used because I was unable to get a reservation app to appear and I was also unable to install via the Windows 10 media installation tool.

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Wine (error x create window)

Similar Messages

Maybe you are looking for