Wine makes mic stop working.

A bit of a niche problem. But my mic stops working in linux apps when my wine game application is started. Closing the wine application makes the mic work again.
It's an inboard mic. I don't use the sound from the wine application so I don't need to preserve that functionallity. I just want my linux apps working.
My music programs work. (Output is fine just not input). And I couldn't see anything relevant in the wine configuration. If you need any more info just ask.
Tried in mumble skype teamspeak. It's all the same. Thanks.

Anybody?

Similar Messages

  • Satellite L300-2CL - built in mic stopped working

    Hello
    When I bought this computer (sep-09) everything was working fine. Then in march (I hade it idle for awhile), my built in mic stopped working.
    Everything eles is working fina, and I have scanned the web for solutions, and tried to install new drivers, unistall them, boots everything possible, disabel and rebooting, but at most I just get a static sound from my test recordings.
    I am using win 7 home pre, but the issues started when I was using Vista. Now I am out of ideas, and my friends on Skype grows tired of not hearing me.
    Is there anything I can do to get the mic work, or should I just buy a headset?
    Greatful for help
    Hugo

    Hi
    Sounds a little bit like an mic hardware issue but you should also check the internal mic settings in control panel -> sound.
    There you will see the Recording tab.
    Here you should mark the internal mic and should check the properties.
    Set all volume controllers to max.
    Choose internal mic as standard device.
    In Playback tab choose speakers -> properties.
    There you will see the level tab. Here you should set the microphone to 100 and should check if its not disabled too.

  • IPhone 5 mic stopped working

    I got my iPhone 11.01 (2 days ago GTM +1) and 12.11 lately 5pm the mic stopped working.
    It works when i record movie, and when using siri. But it does not work when i am trying to record voice, or trying to call someone.
    Please help me

    I had the same issue. I noticed people couldn't hear me when I called them over the phone all of a sudden one night. So I tested the microphone using the voice memo app to see if it was a hardware issue vs a carrier issue. Looks to be a hardware issue. HOWEVER, on incoming calls, the microphone seems to work fine. And after using another phone to call myself to test, my next outgoing call was fine!  I think I might still run by the Apple Store and have someone look at it. Here's a video of the microphone not working even though it works fine again now.http://www.youtube.com/watch?v=y8iduofHMAk

  • Internal mic stopped working today, please help! C660 1F1

    Hey guys,
    My laptop is a Satellite C660 1F1, and it runs Windows 7, 64bit version.
    This afternoon, my internal mic stopped working. It was just fine this morning. Yet I can still hear people on Skype perfectly.
    I've checked all my settings, and according to them, everything is just fine. But it isn't. The little green bar that shows received sound doesn't move at all. It only moves a tiny bit when I tap the mic with my finger.
    I've reinstalled drivers, I have my settings adjusted for maximum mic usage, but it's just not working.
    I don't know what else to do, and this mic is the only way I can contact my family right now. Someone, please help me!

    Satellite C660-1F1
    This is the site for US computers. You''ll probably have better luck in these forums..
       Toshiba Support Forums in Europe
    -Jerry

  • Realtek Mic stopped working Please Help.

     I'm on a Toshiba NB205-N325BN, Windows 7 Home Premium, Intel Atom processor N280 o 1.66GHz, 512KB L2 Cache, 667MHz FSB Mobile Intel® 945GSE Express Chipset. Audio Driver is  a Realtek High Definition Audio driver version 6.0.1.5904
    My internal mic stopped working. I'm not sure how long it hasn't been since I don't use it all the time, but when I went to use skype last night I found that the mic wouldn't work with anything even the sound recorder program in the accessories folder. I've tried uninstalling and reinstalling the driver, but to no success. I figured I give this forum ago to see if any one could help otherwise I'll have to call the Toshiba support line or do a clean install of windows (which I do not want to do at this time.)

    I actually got in contact with Realtek's support via e-mail, and they sent me a program to install that will let them check their devices that are on the machine. After I ran the scan this is the conversation that we had:
    Realtek: "We found you had plugged a external mic to microphone jack. Have you tried to unplug external mic and then check the built in mic ?" 
    Me: "I don't own an external mic, but I did plug in my headphones into the mic port by accident recently maybe that was it? I don't have anything plugged in right now and it's not working."
    Realtek: "Please try to dump audio info again(run the scan again) during recording interanl mic sound."
    After I ran the scan again they sent me these instructions, and I'm kind of confused on what he means (I think the support is in Asia somewhere and they are translating each message at a time.)
    Realtek: "We tried to check it with TOSHIBA. Your machine supports audio prower download feature after audio idle status. You can try to turn off this function on the Power Manager Page of Realtek HD Audio Manageer. Or you can try to plug headphone jack to keep audio power up state .
    Can anyone help me understand that last part? I went to the Audio Manager and I didn't see a Power Manager page anywhere! Does "Or you can try to plug headphone jack to keep audio power up state." Mean that it might start working if I try to use it with headphones?

  • Mic stopped working after upgrading RAM from 2G to 8G.

    Windows 7 64-bit Ultimate
    Proc: Core2 E6800
    MB: EVGA NF68 (nvidia 680i chipset)
    2Gb of RAM?
    Audigy 2 ZS
    EVGA 8800GTX
    Upgraded my RAM to 8G, mic stopped working. Pulled 2 sticks(4Gb), works. Pushed 2 sticks, broken...
    Found this post:
    <a rel="nofollow" href="http://forums.techguy.org/windows-xp/877634-solved-windows-sound-recording-stopped.html"]http://forums.techguy.org/windows-xp/877634-solved-windows-sound-recording-stopped.html[/url]
    Apparently I'm not the only one?
    Seems like a pretty silly problem. Having a TOM address above 4Gb blow the driver's mind?

    : No, you're not the only one. As you can see <a rel="nofollow" href="http://forums.creative.com/t5/Windows-7/Audigy-2-ZS-with-Windows-7-64-Bit-and-more-than-4GB-of-RAM/td-p/53795;jsessionid=A339FB657638D20C9FF346FC283A37]here[/url].

  • My iPhone 4S mic stop working suddenly when i use it to make calls from Skype to other Skype users

    Hello, i have been using Skype on my iphone to make both Skype and "Call phones" from Skype.
    Today it suddenly stop working - I have tried all the tricks I have found - nothing seems to work.
    Thanks for you help.
    iPhone 4S - IO 7

    You have hacked your phone with Turbo SIM. You cannot get any help here for hacked phones. Contact the place/person who sold you the SIM. Surely, they have support services, don't they?

  • MIC stopped work

    Hey...anybody had this problem? I have an X-fi Elite Pro and sudden?y the Microphone stopped working when connected in the external break through box...i only hear some weird noise when it,s in the max volume input, and a very very low voice coming from micrpohone. And i can,t put the main volume more than 60% cause the speakers begin to make a terrible weird noise...like rain noise. Any? Tks
    Yes i have a full reinstall of Windows Xp Sp2
    Yes i hve the last bios update
    And i have only X-fi in my PCI
    Tks

    might be too late but i had the same issue. I then realized that the protective film (screen cover) i put on was covering the mic. ripped the top film off and boom it worked again!!

  • Linksys CIT400 mic stopped working

    Just yesterday with these new updates in Skype (I presume that's what caused it), the mic on my Linksys CIT400 phone stopped working. It was working flawlessly up until then, then it just wasn't working anymore.
    To make it more weird, it's not just skype, it doesn't work on landline connection either. Now I did think its a hardware issue, but honestly, mics don't just stop working like a flick of a switch. Especially as you can hear clicks when you tap on the phone. Googled the problem, and it seems it corresponds to phone being basically stuck in mute mode. But I try to make a call, and turn mute on and off, and it still isnt passing sound along. My only conlusion is that with the latest Skype update - the voice isn't carried through for whatever reason.
    BTW, I did try to reset the device and update software, but none of that helped (says I have the latest version of the software). So please if you have any ideas or solutions to this, let me know.
    Solved!
    Go to Solution.

    First, I wish to thank you for your reply and the suggested answers. Sadly, I've tried them and none worked. I was really hoping that updated sound drivers will resolve the problem, but no luck. This is just the tip of the iceberg of some 100 changes, updates, resets I've done in past 10 days trying to resolve this problem.
    Frankly, I'm very tired and disappointed with Skype at the moment. When you have 2 completely separate devices like I do and they both exhibit the same behavior at the same time, like mine do, there's only 1 thing to pinpoint it to and that is the 1 thing they share in common, which is Skype. I've been a loyal customer of Skype for probably a decade now. Having active subscriptions, buying Skype products, Skype out credits etc. I tip the hat to their support which spent over 2 hours with me on Sunday trying to troubleshoot my problems, even gave them Remote access to my PC so they can try to instal and change any setting they want, but no luck...
    It's obvious the problem is deeper and that Skype changed the way it processes or picks up sound, and that's what is causing the issue on multiple devices like mine. I have no problem with that, or progress in general, but if you do that, then WARN the customers, say "hey, your device might stop working". And last but not least, leave them an option to use a previous, FUNCTIONING version of Skype, not the new and obviously buggy one.
    I am very, very disappointed in this behavior, it's no wonder people are switching to other apps and for the first time in last 10 years, if I don't manage to solve this problem out, I will be looking into them as well.
    Once again, thank you for your reply and if you or anyone has another suggestion, while Skype tech team is working on analyzing logs in my calls, I am more than willing to try them out.  But after 2 weeks of being unable to use the product I'm actively paying for, my patience is nearing the end. 
    Still,  I'll try to stay positive and keep my fingers crossed that a temporary solution comes up
    Grateful in advance,
    Milan

  • In-line remote & mic stopped working after software update!

    Hi guys. I don't know the proper name for it but you know the headphone jack on unibody MBPs is compatible with the iPhone headphones, which have remote and mic. You can make calls and control iTunes.
    Shortly after the latest update which give you the App Store, the function has stopped working all together! Does anyone else have the same problem or am I an isolated case?

    Try resetting the PRAM. Info here:
    http://docs.info.apple.com/article.html?artnum=2238

  • Imac's Sound and Mic stopped working!

    Last night my Imac's sound stopped working. Internal speakers don't work, plugging in external speakers don't work. I thought this was just a hardware problem, but my internal mic also doesn't work, which is on the other side of the computer....
    I've rebooted many times, cleared the pram, checked my preferences, played with the audio midi controls, plugged and unplugged the cord in the line out and did everything besides dance around the mac singing.
    Any suggestions on how or why this would just stop working? It has to be something i'm missing, some setting.
    I've downloaded Line In, didnt do anything. I downloaded Sunflower, didn't do anything.
    The only thing I can think of is I just loaded Parallels and Win XP, but I just uninstalled it and still no solution.
    Help please!!

    ok let me help you with this process, go to the system preferences in your OSX go to the icon Sound click on it internal volume should be all the way up or mid high up Output volume either all the way up or mid way up thats in the input tab on the top. Now the output tab should the balance should be in the middle and output volume should be mid or all the way up . If that is not the case then there could be a hardware problem which I doubt because when the computer is off it creates a connection from line in to line out.

  • I have a corrupt Photo file, that makes Aperture stop working properly.

    I recently imported some of my old photos from a CD to the Aperture Library. Every time I open that project or try to work with any of those photos Aperture will stop working. (in a very aggressive way)
    The viewer wont update.!
    It wont make any change or save anything.!
    I have to quit and restart Aperture to have it working again, I don't know what is wrong.
    Any Idea?
    Maybe new aperture .5 will fix this??
    TKS
    G5 quad   Mac OS X (10.4.7)   big ram

    Another option would be to quit Aperture, remove the project from the Library using the Finder, reopen Aperture (the troublesome project will now be greyed out), throw the troublesome project out, and finally reimport the images back into Aperture. The only problem is you now have to re-do any adjustments etc. for that project. If he project has other images you do not want to re-do you could try just removing the problem import group, go back into aperture and then throw those images out, quit (you may have to force quit) Aperture and then restart Aperture. I did the above on a test Aperture library, but as usual you have to be carefull. Do not do any of this without first duplicating the troublesome library.

  • I can no longer edit song and album information in iTunes. I right click on the album, the window opens with "get info", "rating", etc., but none of it operates. What did I change to make it stop working?

    I can no longer edit album or song information in iTunes. I right-click on the album (or song), and the window opens with "get info", "rating", etc., but none of it operates. It won't get or save album art, anything. What have I changed to make it all stop working?

    You are describing an iTunes problem, not an iPod touch problem. Try posing in the iTunes forum.

  • External mic stopped working on my laptop

    I was in the middle of recording music and then the  external microphone stopped working, this is the first time it has done this. And yes I have it plugged into the right jack I also have checked to make sure that it is unmuted, I thought that maybe somehow the driver unistalled itself so I got another driver and still nothing. But to be honest I have no idead what I am doing here people so please any help will be greatly appreciated.
    Thanks
    P.S.
    I have windows 7 and the model laptop is a satellite L505-ES5018

    same problem as me, I accidently deleted my driver (one word, brownies)
    Is there any way to get them back? Maybe a driver download by mirror if someone can assist us it would be greatly appreciated. thanks

  • Embedded Flash video makes links stop working

    I have a strange problem.
    I embedded a flash FLV video file into Dreamweaver site and I
    published it.
    All the links in my site works fine as long as I do not look
    at the video page more than twice.
    If I keep going back to look at the video page, some of the
    links stop working.
    Does anybody experienced this?
    I made my website with Frontpage before and I embedded a WMV
    video file to my page but I never had this problems.
    This give me such a headache because if this keep happening,
    I can,t make websites for my client.
    Please somebody help me.
    If you have to look at my site, my site is
    http://www.1000arts.co.uk/theartoftaichi
    and the video page is under the Classes drop down menu.
    Thank you very much in advance.

    Hi all
    For those of your that may of experienced the same issue Cisco have a known bug for it which is fixed in version 5.3.
    I will upgrade our version from 5.2.2 to 5.3 and let you know how it goes.
    CSCth09724 - Video embed code doesn't work till auto-play is set to true for video
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCth09724
    As per the TAC engineers notes “Disregard the found-in/fixed-in notes. The bug was in 5.2.1 and I have confirmed that it is fixed in 5.2.3”
    The hardware support notice for 5.2.3 is located below, so it’s worth checking the hardware version to ensure it’s compatible. If the server is not in the hardware list below, this means it will support 5.2.3.
    Server Appliance
    End   of Sale Date
    Last   Date of Support
    DMS   Support
    MCS   7825-H2
    30-November-2008
    30-November-2011
    Up   to v.5.2.2.x
    MCS   7825-H3
    13-March-2009
    13-March-2012
    Up   to v.5.2.2.x
    MCS   7835-H1
    13-September-2007
    13-September-2010
    Up   to v.5.2.2.x
    MCS   7835-H2
    13-March-2009
    13-March-2012
    Up   to v.5.2.2.x

Maybe you are looking for