Wine - not using correct fonts under Xorg 7.0

How can I tell Wine to use fonts from the correct location under Xorg 7.0? There's nothing in winecfg that I can see related to it, and no file in /etc/wine to alter...

Snowman wrote:wine 0.9.5-1 was out today. Did you try it?
I did indeed, but sadly it had no effect.

Similar Messages

Optimizer not using correct execution plan

Hi ,
DB version : 11.2.0.3
My sql query ran last month 1 hour. But the same sql query today running for four hours. Looks like optimizer is not using correct execution plan. I have used tuning advisor and applied recommended sql profile and query execution is back to normal. I can see statistics are upto date for the tables. Any other factors why the optimizer is not choosing correct execution plan ?
Thanks.

What is the correct plan according to you? Multiple factors cause optimizer to chose a different plan. As a rudimentry example - A binary index column having low cardinality than expected, after new data has been inserted. Never ever expect your query to have same execution plan till the entire lifetime, until the underlying data does not change or nobody changes database settings.
You have to give a lot of information if you are looking for performance tuning. Pls see following thread
https://forums.oracle.com/message/9362003#9362003

IP address not used correctly at RT Ping Controllers.vi

It seems to me that the IP address provided to RT Ping Controller.vi and RT Reboot Controller is not used correctly.
What I do is: Set the Subnet flag true and give a numerical IP adress to RT Ping Controller.vi
What I get is the controller information for the controllers on the subnet, even if the IP does NOT match.
Why do I do this? I want to acquire the MAC of the controller specified by the IP to use it for the reset vi.
What I do second is: Set the subnet flag true and give an IP address to RT Reboot Controller.vi and provide a MAC address. The IP address does not match to the controller with the MAC given. The controller with the MAC reboots, independent of having a different IP.
What is going
on here and how can I get the correct MAC for an IP easily (i.e., without looking it up in MAX and typing it in somewhere)?

Try setting the Local Subnet value to FALSE and pass in the IP you want to ping. You should get just details back on the target you specified, including it's MAC address. If the IP isn't a valid RT target, you will get an error.
When Local subnet is set to TRUE, it will attempt to ping all controllers on the local subnet (regardless of the IP address passed in)--requiring you to search the resulting array for the IP you are interested in (and yep.. it might not be there).

How do I save as default, not to: Rely on sytem fonts only, do not use document fonts

I get odd characters all the time until I uncheck this box in preferences before I print. I want that as my default, but I can't see how to change that setting to a default setting. I don't understand why you would not want it as a defualt unless the printing speed is 1/2 second faster using sytem fonts.
Anyone have and idea how to change this so I don't have to preview every web page I want to capture to make sure it printed correctely instead on a bunch of gibberish.
You get to this point by chosing Adobe as the printer, then clicking on preferences, then unchecking this box. I just can't see how to make that change the default setting.
I am using Acrobat Standard version 9.4.6

Open your Printers, (right click Adobe PDF) select Properties, fromt the Printing Preferences tab, make the change

Blender do not display correctly after upgrading xorg

Yesterday, I do a pacman -Syu
and then found that blender do not display correctly.
The panels are not shown and the working area is cut into 2 halves of different colors.
Then I check /var/cache and found that some X components were upgraded.
My graphic card is ATi mobility Radeon 7500
Anybody can help?Thanks!

From the description, I seem to have exactly the same problem. My wm is dwm-4.0 and I grabbed some other info which may be useful:
[root@myhost ~]# Xorg -version
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux myhost 2.6.19-beyond #1 SMP PREEMPT Fri Dec 15 17:41:19 EST 2006 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
[root@myhost ~]# blender -v
Blender 2.43
[root@myhost ~]# pacman -Qii xorg
Name : xorg
Version : 11R7.0-1
Groups : None
Packager : Arch Linux (http://www.archlinux.org)
URL :
License : None
Architecture : i686
Size : 4096
Build Date : Sat Feb 18 14:04:14 2006 UTC
Install Date : Wed Jul 26 22:39:07 2006 UTC
Install Script : Yes
Reason: : explicitly installed
Provides : None
Depends On : xf86-input-keyboard xf86-input-mouse xf86-video-vesa xorg-server xorg-server-utils xorg-xauth xorg-xinit xorg-xkb-utils
Required By : None
Conflicts With : None
Description : X.Org dummy package
[root@myhost ~]# pacman -Qii blender
Name : blender
Version : 2.43-3
Groups : None
Packager : Arch Linux (http://www.archlinux.org)
URL : http://blender3d.org
License : None
Architecture : i686
Size : 31041839
Build Date : Mon Mar 12 22:28:29 2007 UTC
Install Date : Thu Mar 22 05:45:42 2007 UTC
Install Script : Yes
Reason: : explicitly installed
Provides : None
Depends On : desktop-file-utils libjpeg libpng openexr python>=2.5 sdl
Required By : None
Conflicts With : None
Description : A fully integrated 3D graphics creation suite
Also, when I run blender from a term it says 'Compiled with Python version 2.5' (no error messages).
It has been a few days since I pacman -Syu'd, so I'll do that and report back if it fixes things.

Why can I not use Dina-font as a Xft font?(SOLVED)

If I use the following code with i.e. dzen2: -*-dina-medium-r-*-*-15-*-*-*-*-*-iso8859-1 everything works fine. The problem is that I want to use it in awesome's statusbar, but ASFAIK it only uses Xft fonts.
Dina fonts are stored in *.bdf.pcf.gz files and as I understand it these font types should be usable in Xft oriented apps. Or what?
Any hints/help are appreciated.
Last edited by Ashren (2008-03-23 16:27:30)

IT works fine for me, this is what I have in my .Xdefaults:
urxvt*font: xft:Dina:size=10
These are the font files I have on my system:
$ ls -l /usr/share/fonts/local/Dina*
-rw-r--r-- 1 root root 24K 2008-02-08 00:54 /usr/share/fonts/local/DinaBold10.pcf
-rw-r--r-- 1 root root 21K 2008-02-08 00:54 /usr/share/fonts/local/DinaBold8.pcf
-rw-r--r-- 1 root root 23K 2008-02-08 00:54 /usr/share/fonts/local/DinaBold9.pcf
-rw-r--r-- 1 root root 24K 2008-02-08 00:54 /usr/share/fonts/local/DinaBoldItalic10.pcf
-rw-r--r-- 1 root root 21K 2008-02-08 00:54 /usr/share/fonts/local/DinaBoldItalic8.pcf
-rw-r--r-- 1 root root 23K 2008-02-08 00:54 /usr/share/fonts/local/DinaBoldItalic9.pcf
-rw-r--r-- 1 root root 24K 2008-02-08 00:54 /usr/share/fonts/local/DinaItalic10.pcf
-rw-r--r-- 1 root root 21K 2008-02-08 00:54 /usr/share/fonts/local/DinaItalic8.pcf
-rw-r--r-- 1 root root 23K 2008-02-08 00:54 /usr/share/fonts/local/DinaItalic9.pcf
-rw-r--r-- 1 root root 24K 2008-02-08 00:54 /usr/share/fonts/local/DinaMedium10.pcf
-rw-r--r-- 1 root root 21K 2008-02-08 00:54 /usr/share/fonts/local/DinaMedium8.pcf
-rw-r--r-- 1 root root 23K 2008-02-08 00:54 /usr/share/fonts/local/DinaMedium9.pcf
Maye sure that you have correct font paths in your xorg.conf, and mayre fun mkfontdir/mkfontscale on the directory where you have installed the font.
EDIT: I don't use awesome anymore, but "Dina-10" worked just fine in awesomerc (if I remember correctly).
Last edited by fwojciec (2008-03-23 14:30:28)

Could not use imported fonts, won't publish my site... total disaster

This version *****... first could not use previously installed fonts then I lost the entire published version. now can't bring up my blog... I published to .mac and only shelleypiser.com comes up but cannot get writeonyoga.com
I want my old version back this one needs to be thrown out and start again. does anyone know why the imported fonts cannot be used to other computers? it came up with big ugly letters. none of the geniuses or procare brains knew what to do....

Embedding a font does not make it available in Illustrator or any other program. (Exception, Acrobat is able, and must, use the font to correctly draw the page.)
If there are missing fonts when opening a pdf in Illustrator, the fonts are not installed on the machine.
As Bob said, "Illustrator is not a pdf editor!". It can, and is abused for such, all to often, with caveats.

Mail does not use correct outgoing server

Problem
Mail in Mavericks (and also IOS6 snf 7) does not use the outgoing smtp server associated with the account being used. This results in either a failure to send or mail being put into the wrong "Sent" folder.
Background
I have most of my non-icloud mail pulled down to a home server from which my laptops and ios devices access various accounts using imap. The local home server also provides smtp and relays all mail to my ISP. Recently I have been switching from an old home server (Mac Mini) to a new one (Raspberry pi running the debian Raspbian version with fetchmail, Dovecot and postfix setup).
While making the changeover I had access to both the old server and the new server enabled on my laptop. Naturally the majority of the settings (Name, email address etc) were the same although the name and address of the server to be used for both incoming and outgoing mail were different. This seemed tp work fine for incoming. However when I tested outgoing mail the copy that should appear in the "sentt" box went missing. This usually indicates some mistake in the setting of the sent mail folder on the accounts but this all checked out.
I eventually found the missing outgoing mail intended to go through the new server in the sent box on the old server. Further trials showed that no matter what I did the outgoing would always default to the old (and therefore first set up) outgoing server.
Deleting the old account and the old outgoing server of course should cure the problem and will eventually be the solution for me when I kill the old server. But i wanted to get to the bottom of the problem in case it reappeared in other contexts. Checking the "use only this server" box produced failure to send rather than the correct result.
Trialing various alterntaive settings showed that the problem occurs when there are two outgoing servers with the email address in the settings and the user name on the outgoing server name being the same. I had assumed that changing the description field would distinguish between the various settings; however this did not work. Changing the Name Field did work eg by putting (O) after my name.
It appears therefore that mail selects the outgoing server on the basis of email address (with the full name included) and user name (trrespective of the actual server or the Description that shows in the smtp server listing. In some ways this is logical but it produces problems in the context I have described and would also be a difficulty if you wanted to use an alternative server when in a different location.
I have trawled support and elsewhere for any thing similar. Lots of mail problems (don't get me started on the way icloud loses outgoing each time you edit the list!) but I have not found any posts on precisiely this point.
IOS devices seem to have similar problems, but a quick attempt at a similar solution does not work, and I cannot be bothered to test the options. I will simply clean them out and put in the new accounts.
Advice
Grateful for any comments or advice from people who have encountered similar problems and whether my diagnosis if correct. Have I missed any obvious corrections that would clear this up. I do not know whether this is a Mavericks issue or also appears in earlier OSX versions.
CPE

Peter,
Where ever the Sent and Trash folders show in the Sidebar, highlight first one, and then the other, followed by clicking on Mailbox in the Menubar, and choosing Use This Mailbox For, and choose the function.
Keep us posted on your progress.
Ernie

Windows File Share not using Correct NIC Interface.

Hi
I have Windows 2012 R2 server with two 1gb NICs. I want to use NIC1 for the regular network traffic/Internet and the NIC2 for database traffic. NIC1 has IP Addresses of 64.141.xxx.xxx (I am not showing the last 6 digits for security reasons)
and 192.168.10.21. NIC2 has the IP Address of 192.168.11.2.
The Workstation accessing this server also has two NICS. NIC1 has the IP address of 64.141.xxx.xxx and 192.168.10.22. NIC2 has the IP Address of 192.168.11.4.
I created a share on the server myDataShare$. On the Workstation I access the share using \\192.168.11.2\myDataShare$ and everything works accept that the data from the share is sent across NIC1 but I want it to go over NIC2. If I add static
routes to both machines it makes no difference all network traffic always goes out on NIC1 for both machines.
If look at the status of each NIC on the send and receive bytes only NIC1 show any traffic. NIC2 is silent. How do I get traffic for the 192.168.11.0/24 subnet to use NIC2?
The strange thing is that if I ping a 192.168.11.0/24 address it goes over NIC2 but file sharing seems to ignore NIC2 altogether.
Thanks,
Simon

Hi Simon,
Windows Vista and later are based on the strong host model. In the strong host model, the host can only send packets on an interface if the interface is assigned the source
IP address of the packet being sent. Also the concept of a primary IP address does not exist.
If the program specifies a source IP address, that IP address is used as the source IP address for connections sourced from that socket and the adapter associated with that
source IP is used as the source interface. The route table is searched but only for routes that can be reached from that source interface.
You can try to set the “skipassource” flag ,by using this flag, the added new addresses are not used for outgoing packets unless explicitly set for use by outgoing packets.
The detail information about skipassource flag:
Source IP address selection on a Multi-Homed Windows Computer
http://blogs.technet.com/b/networking/archive/2009/04/25/source-ip-address-selection-on-a-multi-homed-windows-computer.aspx
The related KB:
How multiple adapters on the same network are expected to behave
https://support.microsoft.com/en-us/kb/175767/en-us
The related third party article:
Exchange 2013 on Windows Server 2012 with multiple IP addresses on a single NIC
http://blog.enowsoftware.com/solutions-engine/bid/185076/Exchange-2013-on-Windows-Server-2012-with-multiple-IP-addresses-on-a-single-NIC
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Safari does not display correct font

I just upgraded to Snow Leopard. When I did this, it did something to the fonts displayed in Safari 5.1.7. When I go to a webpage (like someone's blog) the entire body of text is in a cursive font. I've tried emptying the cache, changing the fonts in the Preferences/Apperiences tab in Safari, deleting the com.apple.Safari.plist, and also deleting duplicate fonts in my Font Book. I don't know what else to do, but it's driving me nuts because it's so hard to read the text in Safari. I've also noticed that it does it in Firefox as well.
Any help would be greatly appreciated!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Don't use the Safari-only Guest login created by Find My Mac.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

EPS File Not Using Proper Fonts in Illustrator

I am trying to import an EPS file that I created in Finale 2014 into Illustrator CS6 (64 bit). It seems to not want to use the Maestro font for the noteheads, rather replacing it with Myriad Pro. I have tried this on multiple machines with the same result. I have tried to switch the font manually, but it will not change.
Likewise, I can open the file in Photoshop just fine with all fonts intact.
I need it as an EPS file because I need to be able to ungroup the vectors and alter them in Illustrator.

devinc,
Maybe the maestro font is not up the requirements.
Illy is particularly particular about the quality of fonts, because she can work with them at a deeper/higher level than most, so you can easily have a font that works in all other applications, but Illy refuses to recognize it as a font.
Some failing fonts discussed in earlier threads have turned out to have rather basic flaws, such as redundant, superfluous, or (if I remember rightly) even stray points, or other clear errors in the paths that they consist of.
You may need to look for similar fonts that Illy is willing to work with.

Why does pdf not have correct font? Can this be changed to match what is on our Word Document?

The pdf does not have the same font as my document. We use Claredon Condensed Bold Italic and it changes it on the pdf?
Also, is there an easy way to just pick a certain pages to pdf?

Hi pkevdon,
How well a file converts depends largely on the quality of the original file.
Does it occur with all files or with specific one?
Would you send your PDF document to [email protected] as an email attachment?
I will check it from my end.Please add the link to this forum post for reference.
Regards,
Florence

PDF does not show correct font with RTF template

Hi,
I have some doubts regarding fonts in PDF reports.
when we create any XML report of PDF output type with RTF template, does the font used in the template has to be uploaded to the server?
I have create a RTF template to produce PDF output with arabic text in Times New Roman font but when i preview the template it shows courier font.
Please help.

Hi,
The document id is discussing general issues with Oracle Reports.
But my basic question is that Do i need to upload font to XML Publisher when i am using RTF template.
Or it is RDF report only for which i have to work with uifont.ali
Please reply.

Opening pdf in illustrator does not display correct font

I have a 30 page pdf form that says it is in timesnewroman font. I of course have Times New Roman. How do I make illustrator recognize the font? It is looking for a font that does not have spaces inbetween the words. When I load the font up it simply replaces all the characters with ??. I tried renaming my times new roman the same way but it still won't recognize it.
I have Adobe Illustrator CS 2.

Hello,
Just like to share my experience with this issue as I too sometime get work that are provided to me from the client in pdf format, and I too sometime get the ???. if possible I try to do the find and replace font technique if the text boxes aren't broken up into sections when I put it into AI, if the text are in section then I'll get spaces in between the words after replacing the font.
What I can do then is delete all the ones that are spaced out but leaving the the very first word or text box and then open up the pdf then hightlight & Copy the text that I need and go back in to AI and paste it in the first text box. Then press the enter key to move whatever text I need to the next line etc. if need be.
If the above don't work I usally contact the client and ask them to provide the font if possible or ask them to turn the text into outline for me to work on. But if it's in outline then that means I won't be able to type if I needed to edit something.

Trouble with Preview not using embedded fonts in a PDF

I have a client I'm working with that is generating PDF reports for various organizations in various languages. They are using an Arial Unicode font but are using different encoding for some of the more unique languages. To ensure the report will be viewable regardless of installed fonts, they are embedding the font.
Most of the languages are showing up fine in preview, but three languages are giving me trouble. Specifically Greek, Russian and Thai which are using encoding EL8MSWIN1253, CP1251, and TH8TISASCII.
Basically the question is whether there is some toggle that will tell Preview to use the embedded font? Or something we can put into the PDF (the pdf is created using FPDF) that will allow a user to know which font/encoding they'll need to install in order to properly view the document? (I'm actually trying to figure that out myself...which font I need to install to get preview to view the document properly).
Thanks in advance for any help.

Actually, I got that example to work... here are the changes
I made...
<mx:htmlText>
<![CDATA[You can vary the font
size, color, face, or any combination
of the three.]]>
</mx:htmlText>
As I said above, I have found errors in the code of the help
docs... this is yet another one of them. Usually its spaces in the
wrong place, or no space at all, or missing ) or ], or a case
sensitivity issue.
If you got your custom font to display, that should work...
but then again.. what should work, doesn't always.

Wine - not using correct fonts under Xorg 7.0

Similar Messages

Maybe you are looking for