Wine + Steam(windows) + bumblebee. How to get working?

Hi,
I would ove to play some of my windows only steam games in linux, so i installed the windows version of steam using wine.
How do i get bumblebee to run the game on the nvidia card? i think all that happens is wine gets run on the nvidia card, or just steam gets run on the card, while the gam only has very low performance.

zomzilla wrote:
Hi,
I would ove to play some of my windows only steam games in linux, so i installed the windows version of steam using wine.
How do i get bumblebee to run the game on the nvidia card? i think all that happens is wine gets run on the nvidia card, or just steam gets run on the card, while the gam only has very low performance.
Please formulate your sentences just a tiny bit better because it is a bit diffuse.
You have a nVidia card, does the game start or not? or is it just laggy?
What gl library are you using (nvidia or mesa?).
Also, what does your xorg.conf say (Especially the `Device` part on your nvidia card).
Most importantly: What nVidia card do you have?

Similar Messages

I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work

I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.

Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files. Some programs are also Versions aware, which offers a kind of restore capability by file. Again needs to be setup before you start editing.
Just a for-your-info:
Mac is not an acronym, it is a nickname for Macintosh.

How to get work JavaFX WebViewBrowser sample in debian linux wheezy?

How to get work JavaFX WebViewBrowser sample in debian linux wheezy
You may also check latest version of this problem here...
The Starting point I have
Debian wheezy
java version "1.7.0_40"
Java(TM) SE Runtime Environment (build 1.7.0_40-b43)
Java HotSpot(TM) Client VM (build 24.0-b56, mixed mode)
GTK version: 2.24
NetBeans 7.3.1
Certified configuration acording to JavaFX Supported Configurations
is
Ubuntu 10.4 +
gtk2 2.18+
GTK is OK. do I require ubuntu?
first try: by downloading Java SE Downloads - javafx sample
Let's try it
zolta@zolta:~/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40$ java -jar SwingInterop.jar
# A fatal error has been detected by the Java Runtime Environment:
# SIGILL (0x4) at pc=0x9b6b4c22, pid=21172, tid=2658700144
# JRE version: Java(TM) SE Runtime Environment (7.0_40-b43) (build 1.7.0_40-b43)
# Java VM: Java HotSpot(TM) Client VM (24.0-b56 mixed mode linux-x86 )
# Problematic frame:
# C 0x9b6b4c22
# Core dump written. Default location: /home/zolta/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40/core or core.21172
# An error report file with more information is saved as:
# /tmp/hs_err_pid21172.log
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
Terminated
Let's see what core dump says
to be continued...

Gusar wrote:
We need *a lot* more info than that. Could be something very simple, like the interface being up before starting wifi-menu (netctl doesn't like the interface being up, it'll only start correctly if the interface is down).
Or it could be something more. In which case, you'll need to start wpa_supplicant manually with debugging enabled:
wpa_supplicant -i wlp18s0b1 -c <(wpa_passphrase MYSSID passphrase) -d
Once this says you're connected, open another terminal and start dhcpcd. Or, if wpa_supplicant doesn't manage to connect, post the *entire* output.
Edit: Ok, you posted more info as I was writing my post. Will look through that, maybe it contains something useful. If not, follow the instructions above.
Edit2: Nope, nothing about wireless in there, except that the driver loaded.
It worked!!
I was looking into the logs and found an authentication failure...my password is very long so I made some mistakes while typing it.
So this is the solution all the way:
SOLUTION:
- No need to install or load any external drivers (all I used was already in the base installation)
- DISABLE THE HIDDEN NETWORK OPTION IN THE ROUTER (thanks for the heads-up @Gusar)
- run "# wifi-menu"
or
"# wpa_supplicant -i [interface] -c <(wpa_passphrase MYSSID passphrase) -d"
- run "# dhcpcd [interface]"
- Good to go!!
I'm sorry for the trouble guys, and like I imagined, it was really easy and now I see my newbiness hahaha ;D
Thanks.

How to get Work schedule repor of employees

Hi all
Can any one help me out in
how to get work schedule report of employees who are works in different shifts in an organization.
Thnks in Advance
Anusha

Hi Anush,
Find the SAP Standard reports for Work schedules:
- PT03 - Display Work Schedule
- PT63 - Personal Work Schedule (even PT61 also helpful as biswajit said)
- PT_DSH20 - Daily Work Schedule
Otherwise you have Time Managers Workplace/ Ad Hoc Query reports to view detail reports, which are user friendly for maintain time data.
TC for Time managers workplace is PTMW
TC for Ad-hoc query is S_PH0_48000513
I suggest you to go with Ad-hoc and select all fields that what ever output you want and view the results (even you can upload also)
Cheers,
TG
Message was edited by: TG

Comcast Cable, Airport Express, Mac, + Windows XP - How to make work?

History:
I have a Mac iBook + (2)Dell Laptops running Windows XP.
Recently, I switched from Verizon DSL to Comcast. New Modem, same router - Airport Express.
Problem - Cable modem to Airport Express to Mac WORK! But, Neither Dell will see a wireless signal. Now, Dell's won't recogize any wireless signals at all. (took to apple store plus Hotspot - nothing) Seems too conincidental that BOTH wifi card would give out at the exact same time I switched to cable.
Previous to the switch to comcast, all worked fine. I know I shut off the broadcast of the SSID prior to the switch, but, thought the Airport was set back to factory default. Current setting of Airport has WEP involked.
Question:
Does anyone know how to get all three Laptops running wirelessly?

Problem - Cable modem to Airport Express to Mac WORK!
But, Neither Dell will see a wireless signal. Now,
Dell's won't recogize any wireless signals at all.
(took to apple store plus Hotspot - nothing)
Most Windows laptops with built-in wireless have a switch which allows them to turn the wireless on and off in order to save battery power.
Ensure that the switch is in the on position.
Previous to the switch to comcast, all worked fine. I
know I shut off the broadcast of the SSID prior to
the switch,
Ensure that it is switched on.
It use to be useful, but closing your Airport or wireless network (sometimes referred to as not broadcasting your SSID) is really no longer a real option when it comes to wireless security.
Unfortunately "Closed" networks, MAC access control lists, and reduction in transmission power are all more "feel good" security rather than real security. All these various approaches are dated and mistakenly lead to overconfidence.
My recommendation is not to worry about broadcasting your SSID but use WPA. This will be more secure than a closed WEP encrypted network. Closing your network makes it very difficult for neighbouring networks to see which channels are free thus causing potential interference problems.
Another thing to consider is that a closed network is still broadcasting and therefore is detectable (regardless of whether it is broadcasting a SSID). If someone was determined to hack into your network, then not broadcasting your SSID and MAC address access control is not going to stop them.
WPA is virtually uncrackable (only really vunerable to a dictionary attack if a real word is used as a password) and therefore will stop the casual user and the determined hacker.
but, thought the Airport was set back to
factory default. Current setting of Airport has WEP
involked.
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
iFelix

Download acrobat is in windows formant, how to get the mac ver?

hi, im hopping that someone in here will tell me how to get the acrobat 9 for the mac, the trial verison. All I see is windows format. Please help me.

It would be good if Adobe could service the Mac platform at the same time (or close) to the PC launches.

How to get work center

Hi All,
I am creating r actual and planned renue report for service orders ( CS ) .
Problem :
I have a service order number , But i am unable get the workcenter of the order.
Please guide me how to get the workcenter based on service order.
Thanks in advance
Regards
Sudhakar

Dear Sudhakar,
Try using this FM: CR_WORKSTATION_READ
Field: GEWRK (Object ID of the Work Center)
View: VIAUFKST
Regards
s@k
Edited by: siemens.a.k on Feb 11, 2010 10:18 AM

How to get work item details programatically ?

Hi All,
I have a list of work items (process instances) and I want to retrieve each item details such as: attachments, notes, id, ...
All the items are filtered and represented as Fuego.Papi.Instance:
Fuego.Papi.Instance[] inst = busProcess.getInstancesByFilter(filter : instFilter);
But the work item details are inherited from Fuego.Lib.ProcessInstance. So, how to get the item details from inst[] ?
Would appreciate any help, may be Dan will have an advise ?
Regards,
Kim

If you have instances returned by your filter, you could extract variable information for each instance by doing something like this:
for each inst in getInstancesByFilter(ps, filter : instF) do
    // here's how to get the value inside a primitive instance variable
    orderAmtObj as Object = getVar(inst, var : "orderAmount")
    // here's how to get the value of attributes inside a complex BPM Object instance variable
    //    - in this case this is an "order" object with two attributes (customerName and amount)
    orderObj as Object = (getVar(inst, var : "order"))
    xmlObject = Fuego.Xml.XMLObject(createXmlTextFor(DynamicXml, object : orderObj, topLevelTag : "xsi"))
    logMessage "The value of the order object's customer name is: " +
           selectString(xmlObject, xpath : "customerName")
    logMessage "The value of the order object's order amount is: " +
           selectNumber(xmlObject, xpath : "amount")
    // here's a rather uninspired way to retrieve who the participant is that was assigned the instance
    logMessage "The participant assigned to this instance is: " + inst.participantId
endInside the above "for" loop, you could retrieve these predefined variables (this example assumes you use "inst" in your "for" loop):
    objRet as Any
    objRet = inst.getVar(var : "PREDEFINE_ACTIVITY")
    logMessage "Activity name = " + objRet using severity = DEBUGSubstitute "PREDEFINE_ACTIVITY" in the above logic to get this information:
PREDEFINE_PRIORITY (priority)
PREDEFINE_ACTIVITY_DEADLINE (activity.deadline)
PREDEFINE_CREATION_TIME (creation.time)
PREDEFINE_PROCESS_DEADLINE (deadline)
PREDEFINE_DESCRIPTION (description)
PREDEFINE_PROCESS (process)
PREDEFINE_RECEIVED_TIME (receptionTime)
PREDEFINE_PARTICIPANT (participant)
PREDEFINE_COPY (id.copy)
PREDEFINE_STATUS (status)
Similarly, you might want to try to get instance information using the Fuego.Papi.VarDefinition object a try. Never used it, but the logic might be as simple as:
    logMessage "who created? = " + inst.getVar(Fuego.Papi.VarDefinition.CREATOR_ID) using severity = DEBUG
    logMessage "does it have attachments? = " + inst.getVar(Fuego.Papi.VarDefinition.HAS_ATTACHMENTS) using severity = DEBUG
    logMessage "does it have notes? = " + inst.getVar(Fuego.Papi.VarDefinition.hasnotes) using severity = DEBUGDan

In GP how to get work items in outlook inbox

Hi,
Any one can explain me how to send work items to Outlook Mail. This option is there in ABAP work flow. I need solution in GP.
Please give any sloution.
Thanks,
Sunil

Hi Jonathon,
in our last project, we faced the same problem and resolved it with a standard notification CO:
- we put a notification CO (+ action) in front of the action you mentioned (that one that generates the UWL's workitem and provides the CO for manual processing)
- the notification's addressee will be the current processor, who is also the guy to do the manual processing
- the notification email contains a link to the process' current workitem, which is the action you mentioned (e.g. a webdynpro form or whatever the manual processing is)
The result is, that there will be an automatically sent notification, followed by the normal manual processing. And our client was happy to be able to customize every single email.
See this link for email administration: http://help.sap.com/saphelp_nw04s/helpdata/en/43/f9097d1b607061e10000000a1553f6/frameset.htm
Best regards
Daniel

[Win VC++ 6.0 ]How to get the number of files count in a folder using VC++ 6.0?

Hi all,
Can any one tell how to get the number of files(.EPS) count inside a folder when the folder path is specified in VC++ 6.0?
Thanks in Advance.
Regards
myriaz

I'm a little confused by the question, but it sounds like you're asking how to count the number of files with a particular extension in a given directory? That's not really an AI SDK question, but it's a fairly easy one to find if you google it. If you're trying to use Illustrator to do it, AI doesn't have a general purpose file API. It has a few functions to do some things that Illustrator needs, but I don't think enumerating directories is one of them.

Parallels + Windows 7: how to get registration to work and stay working

So I recently replaced my hard drive and I guess I didn't include my Boot Camp partition in my Time Machine backup (oh well, I didn't actually have anything saved in it fortunately.) So the upshot is I have to start fresh with Boot Camp, Parallels 5 and Windows 7 (and OS X 10.6.6.)
I want to have my Boot Camp partition be accessible from Parallels which is supposedly possible but I never got my last install to actually function in terms of Windows registration. I could get it to work fine in Boot Camp but if I opened it in Parallels it would request registration again but then the registration wouldn't stay registered and the registration would no longer be valid in the Boot Camp mode either.
What I'm looking for is some step by step info on how to make this work right from the start. Or alternatively tricks or tips to get Windows to play nice in terms of the two ways of accessing it.
PLEASE don't give me a link to the Parallels forum unless it's something specific that will help. I am well aware of the address of that forum (and it's pretty dead over there.)
Thanks!

Install Windows using Boot Camp Assistant. Register it. Install Parallels and configure it to use the Boot Camp installation of Windows as the guest operation system. Register Windows in Parallels. If the online registration does not work use the telephone registration. It is an automated system that will give you a second registration number. If the telephone system does not work for you call the registration assistance number. They will give you a new key for your Parallels Windows.
The reason you need to register twice is because Windows uses your hardware configuration to identify what computer it is installed on. When you use Windows in Parallels, Parallels creates virtual hardware that appears different than the hardware used during the Boot Camp installation. So Windows thinks it is installed on two different computers. Once the registration is performed with two different keys (free of course) then you won't have any problems.
You will need to go through this double registration for Microsoft Office as well if you install it.

Transformer asus t100/windows 8/ how to get ade to work on it and retrieve ebooks off old pc?

ade is not the greeastest piece of work ever, but I got used to it on my laptop, storing ebboks I bought there happy with windows xp!
new asus transformer comes along and I want to use this as my e reader, but altho I seem to have downloaded ade on to it, how on earth do I find my ebooks ? the library on laptop shows them all there, all bought post adobe sign up, and all the pdf dox i use off the pc/laptop. but nothing on the new tablet.
I sort of thought that i would be able to transfer content across, but how to do this is the question.
my old sony ereader causes the tablet to throw a fit....

Hi,
Please use the following package:
http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-3/OJ8600_1315.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

X61s (7668CTO) blue screens during factory restore - how to get working restore discs?

How can I get factory restore discs that actually work? My X61s was purchased with a Vista Ultimate OEM (32-bit) installation, but when I attempted to do a factory restore this weekend using the recovery disks with the laptop, the recovery process complained that the second disk was not the correct disk. If I follow the prompts to continue it blue screens with a "Page Fault in Non-Paged area" error. I then tried to use the version on the recovery partition (not the created discs) but it also blue screens with the "Page Fault in Non-Paged area."
How can I get factory restore disks that actually work to recover my Vista Ultimate OEM installation to the factory settings? I am (just barely) still inside my warranty period, so want to get this resolved ASAP. The only other recovery CDs it came with are for XP, but the laptop was purchased and shipped with Vista Ultimate and I don't want to downgrade to XP (if those discs still work).
I could no longer boot into Windows or do a factory recovery. I have installed Linux so I can work again, but I would like to have the option of booting Vista if I need it.
Thanks for any help/guidance,
~ Daniel
Message Edited by Jarboed on 12-16-2008 12:18 PM
Message Edited by Jarboed on 12-16-2008 12:20 PM

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I came across your post about the System Recovery, and wanted to help! To start, can you provide me with the Product Number and Operating System of your notebook? You can use these links to help you find the Product Number and Operating System:
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running? In the meantime, please review the following documents, as they may help to resolve the issue for you:HP PCs - Troubleshooting HP System Recovery Problems (Windows 8)HP PCs - Troubleshooting HP System Recovery Problems (Windows 7) Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

Windows domain how to get full user name with last name.

Hi:
I hope someone find the answer, I wrote this question before in the old forum http://forums.sun.com/thread.jspa?threadID=5450216, but I didn't get an answer so I am migrating my question.
Is there a way to get the full user name from a windows domain? Like the one that you see in the windows start menu on the top.
I have an application that needs to print a report with the full user name with last name and everything (Example: John F. Doe, not jdoe), so they can sign above the name. Please tell me if there's an api or jar, because the only thing I can get right now is the username. One more thing, it's a stand alone java swing application.
I will appreciate your help.
Regards,
j2gl

JAAS with the Windows Login Module is about as close as you can get. I don't know exactly how close that is.

How to get work schedule through pernr

I'd like to get one pernr's work schedule, just some data like how many hours does he work a day? which quota type does a absence type deduct? Is there any BAPI or FM to get it?
I check the img, and find that if you use pernr to get esg, and psg, than you can get it? but i don't think it is a good idea? so any way, help me , please.

hi,
use f.m HR_PERSON_READ_WORK_SCHEDULE
Thanks
Vishal kapoor

Wine + Steam(windows) + bumblebee. How to get working?

Similar Messages

Maybe you are looking for