WinHelp Project conversion

Hi everybody,
I'm trying to open an old RoboHelp (v.5) project with RH6;
this project was a WinHelp project and now I need to recompile it
as a Chm file... Everything seems to work fine, but when I open the
chm i see there are some missing link (I mean that some links are
processed as normal text)...
Moreover, I've also tried to take the old generated hlp file
and "convert" it.. I'ive obtained a better result (even if not
every link works fine - every link are processed as expected, but
there are dead links) but I've lost the old project's
"structure"...
So, there's no way to have a "one shot" conversion that works
fine?? I mean, its just a matters of compiling options or what?
thanks in advance
Gio

Hi Everybody:
I summarize the last post: In RoboHelp 7 for Word, the problem is that when I try to create a winhelp2000 project importing from a .hlp file of origin created previuosly, the import process makes error because it want to extract images that not exist on the .hlp file of origin. Thanks in advance for all the help that you can give me.
Ismael.

Similar Messages

Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

Importing a WinHelp project into RH 8 HTML changes the fonts in all my styles

I am trying to import a WinHelp project created with RH 8 for Word into RH 8 HTML. I have noticed two major things:
1. The first topic is preceded by the names of many fonts. At the end of these set of fonts, my topic appears. I am attaching a partial view of these fonts below:
Arial;Courier New;Symbol;Helvetica;Courier;Tms Rmn;Helv;New York;System;Wingdings;MS
Mincho ;Batang ;SimSun ;PMingLiU ;MS Gothic ;Dotum ;SimHei ;MingLiU ;Mincho ;Gulim
;Century;Angsana New;Cordia New;Mangal;Latha;Sylfaen;Vrinda;Raavi;Shruti;Sendnya;Gautami;Tunga;Estrangelo
Edessa;Cambria Math;Arial Unicode MS;Cambria;Calibri;Tahoma;CG Times ;Univers ;Times;Verdana;CommonBullets;Webdings;WP
MathA;Adobe Caslon Pro Bold;Adobe Caslon Pro;Adobe Fangsong Std R;@Adobe Fangsong
Std R;Adobe Fan Heiti Std B;@Adobe Fan Heiti Std B;Adobe Gothic Std B;@Adobe Gothic
Std B;Adobe Heiti Std R;@Adobe Heiti Std R;Adobe Kaiti Std R;@Adobe Kaiti Std R;Adobe
Garamond Pro Bold;Adobe Garamond Pro;Birch Std;Blackoak Std;Brush Script Std;Chaparral
Pro;Charlemagne Std;Cooper Std Black;Giddyup Std;Hobo Std;Kozuka Gothic Pr6N B;@Kozuka
Gothic Pr6N B;Kozuka Gothic Pr6N EL;@Kozuka Gothic Pr6N EL;
2. All Topics are imported as far as I could tell at a glance, but all the fonts have changed. I used styles based on the Normal_RWH.dot template that has been modified.
Anyone can tell me how to recover my fonts besides doing so manually?
Thanks,
Esperanza

It sounds like the first problem is related to Snippet 56.
http://www.grainge.org/pages/snippets/snippets.htm
My guess is you just delete the unwanted text.
To correct the styles you may be lucky and just have to go into the Style Editor and change the font for each style. If not you will need to look at the HTML and you will likely find an inline style sheet in the topics and maybe even inline styling. Sorting that out will depend on your knowledge of HTML.
Snippet 104 may also help you.
Post back if more help needed when you have worked through that.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

?¿There was an error during muxing preparation (project conversion).?¿

*There was an error during muxing preparation (project conversion).*
can anyone elaborate on this?

Same thing just happened to me. I re-output my quicktime movie with chapter markers turned off. You probably have a chapter mark set too close to the beginning, end or near a transition. I didn't have time to futz with the markers so I just turned them off.
Muxing stands for multiplexing. It's when iDVD takes all the data layers, video, audio etc. and multiplexes them into one data stream. When you play the dvd in your player that one data stream is DE-Muxed back into the original layers.
When you give iDVD a quicktime movie with chapter marks it encodes those chapters as separate mpeg 2 clips. When it muxes it combines everything into one stream. If there are any inconsistencies then muxing fails.
DVD Studio pro gives a more detailed log when muxing fails. It usually involves problems with chapter marks.
Message was edited by: Daniel Nocera

Help importing WinHelp project into RoboHelpHTML

Dear All,
I am a programmer currently evaluating RoboHelp Office X5,
with the intention of converting our existing WinHelp project to
the more modern (and vista friendly) HTMLHelp.
I have tried using the import function (RoboHelp
Starter/Import/WinHelp Project -> HTML Help.
This is a large (2000 topics) project, with a cnt file, map
file (HM) and topics.rtf file.
Robohelp chugs away for a bit, then opens the new RoboHelp
project.
The screen briefly flashes with the workspace, then
refreshes, and the HTML Files (Topics) folder in the workspace is
empty. i.e. the new project appears to contain no topics.
RoboHelp has produced HTML files (about 2000 of them), in a
topics directory, but these don't appear in the project itself.
Not sure how to progress? Any ideas?
Hope someone can help,
Merry Xmas!
Robin

This post has been duplicated in the RoboHelp HTML forum, see
there for answer.
Please do not cross post.

MW project conversion to 10.1.3.0.0

I just noticed that when MW auto-upgrades my project when I open
pre 10.1.3 projects, it does not convert the datatypes properly in my
DB descriptors. (for instance, all INTs become VARCHARSs)
I am using SQL Server as my DB Platform
Is this a known issue or it's a config problem on my end?
Thanks in advance!
Tony.

Hi, Tony.
All of the Workbench platform configuration files were re-organized and cleaned up between 9.0.4 and 10.1.3. Unfortunately the names of some of the SQL Server datatypes were changed and the project conversion code does not compensate for the new names. The problem columns in your 9.0.4 project have a datatype of "INTEGER", but the SQL Server configuration file now only has an "INT" datatype; and, since "INTEGER" was not found, it gets converted to the default, "VARCHAR".
You have 2 options short of manually correcting all the column datatypes via the Workbench UI:
1. Before upgrading your project: You can search through all the XML files in the 'table' subdirectory of the 9.0.4 project and replace all occurrences of "<type>INTEGER</type>" with "<type>INT</type>", then read in the project and the INT datatype should be found.
2. After upgrading your project: If your database is still in synch with what you work with in the Workbench (with the exception of the datatypes, of course), you can refresh all the tables from your database and the datatypes should be updated correctly.
Brian

Project Conversion

Hello,
I am dealing with a Project Conversion FD.My client is already having SAP-PS implemnted. However they are implementing IM now. My question is after go live of IM there will be some open projects in the system.
The approach i am thinking is to the extract of the projects in a flat file and map the project against Interest Profile, Overheads etc and reload the projects.
My question is now some of the project will be partially confirmed. What will be the impact on the total cost because of loading Interest Profile, Overhead key etc. Will Interest and Overhead be recalculated for such confirmed activities or will it be applicable for only unconfirmed activities.
Is there any other better approach?
Thanks
Sarang

you should be able to apply these on a periodic basis

How do I import RH for Word WinHelp project into RH7 HTML?

I'm trying to convert a WinHelp project (created by someone
else in RH5 for Word) into a full HTML Help project in RH7, so that
I can build HTML Help or WebHelp outputs.
I have tried Menu > File > New > Project > Import
tab > select WinHelp Project. In the Wizard, I select the Help
Project to Import, click Next, then select the Output folder. But
there are no Source Documents listed to import. They are visible in
Windows Explorer, but RH7 does not see them. I cannot step Back /
Next or Finish without selecting files, so I can only Cancel and
try again.
Any ideas anyone?

Work-around
I discovered by trial and error that if I open the RH5
WinHelp project in RH7 first, then close it, this adds lots of
other files to the project folder.
Then I can import it into RH7 HTML.
That solves this question.

WinHelp Project in RoboHelp for Word v7.0

I inherited a WinHelp 4 RoboHelp project and have worked with
it successfully for a few years, converting it to various versions
of RoboHelp. I was able to open it recently in RoboHelp for Word
v7.0, after getting MS Office 2007 installed on my machine, but it
won't save any edits I try to make to the Word docs. My choices to
Save are: "Yes", "Yes to All", "No", and "Cancel". The only way to
get the Word doc to close is to choose "No", and then my changes
are not being saved.
When I opened the WinHelp 4 project in RoboHelp for Word
v7.0, after getting MS Office 2007, there was no prompt to convert
it to Word 2007, and the Word side displays "Compatibility Mode" at
the top. (When I opened a WebHelp project in RoboHelp for HTML
v7.0, after getting MS Office 2007, I was prompted to convert the
project).
Also, when I click "Generate Primary Layout", nothing
happens. No error message, no popups, nothing.
I read on another page where someone suggested re-instaling
RoboHelp v7.0 for someone who had these issues with a project that
had been opened before receiving MS Office 2007, but I did not open
mine until after getting this. If anyone else is having these
issues, I would appreciate your thoughts.

I think the point in the thread you read was that RH has to
be installed after Word. It's not about the opening of the project.

How can I load a Key Member on a historical project (conversion) if the employee was recently terminated?

I can not load Key Members in my conversion if the employee was recently terminated even though they were active historically when the project was open.

sundy.liu wrote:
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
Darren

EJB project conversion tools

Are there any tools provided by Oracle/BEA to convert EJB 2.x project in Workshop to EJB 3 for plain stateless session beans?

Nope, there isn't any feature support for this conversion in Workshop.

PROBLEM WITH iMOVIE PROJECT CONVERSION TO QT

I occasionally have strange things happen when converting iMovie (DV) projects to 'full quality' QT.dv files.
Example: footage transferred from a visually pulsating image (originated on a 1920s 30 line mechanical TV scanner invented by J L Baird) has an acceptable rippling effect seen in iMovie. When converted to a QT (full quality) file the rippling becomes a rapid strobing flicker, ie something is changed in conversion. And, DVDs made from each - from the iMovie project and from its QT conversion - produce these same effects.
Any info on what happens in conversion to QT causing this problem?

Well...thanks a lot for ur help...!
But...somehow, I feel the settings of my Top-Link Db-Adapter are fine...
(B'coz as far as i can remember, i haven't meddled with it since creating/configuring the DB-Adapter in my ESb project...and there, i could specify my DB Connection ( say, DBConnection1, & could later import the Exact Table i wanted as an Offline Data source (for the routing rule..for Mapping the fields..) )
...i somehow believe there should be a problem with the <ORACLE_HOME>\j2ee\home\application-deployments\default\DbAdapter\oc4j-ra.xml
B'coz as Marc pointed out, i couldn't see any data-source with JNDI name loc/DBConnection1DataSource in my EM console...
So, i tried creating a new data-source there & pointed it to one of the existing connection-pools in the file :-
<ORACLE_HOME>/j2ee/home/config/data-sources.xml
In this connection-pool, i basically set the proper connection-string ("jdbc.thin.....") to point to the proper SID...( as i had set up & tested in my JDeveloper Database Connection..)
Hope my approach is right..??
Or..am i missing something here..??
Thanks a lot again....!

Latency Between Outputs After Project Conversion From Logic Pro 9

hiya!
i am experiencing a bizarre kind of latency – between outputs. for example, audio assigned to stereo outs 13-14 will leave my system 120 or so ticks after audio assigned to mono outputs 3 or 4. sometimes mono outputs are out of sync with one another too. there's no apparent rhyme or reason, and the latency itself seems to shift – even with plugins turned off and removed from the channel strips. if i have an aux that's outputting to channels 7-8 and do a send to an aux that outs to 13-14, this audio should be perfectly aligned, but it just isn't.
i experience this problem in sessions converted from logic 9 to logic x, though sometimes it seems to happen within sessions started in logic x. i can't for the life of me figure out why it's happening, but do believe there's some sort of error being introduced in the conversion. i can't find anything anywhere on the internet about it.
one temp fix i found was to insert an I/O plugin into the problematic aux, turn it on with an out assigned, then turn it off. sometimes that's worked, and sometimes it hasn't. i've been able to use delay compensation on certain tracks, but it's not an exact science, and sometimes the compensations themselves need to change in order for the tracks to sound aligned. it's beyond aggravating. in some situations, i've had to re-record entire sessions. not tight!
to be clear, this is not about monitoring latency, or having to slide tracks into alignment after recording, or the waveforms on the screen not matching up with what i'm hearing. this is not about plug-in latency. the situation i'm describing happens when plugins are entirely removed: audio that is supposed to be leaving logic at the same exact time via different outputs is somehow not aligned.
my signal chain:
logic pro x.0.7
mac pro quad core (trash can) into -->
apogee symphony 16x16 -->
neve 5059 16x2x2 -->
api 2500 -->
back into the symphony
i've been assured by both apogee and neve and sweetwater that this is not their issue--it's logic pro x. i'm inclined to agree, since it seems to be happening before the audio leaves logic.
please help! many thanks for anything!

godmodeinternet wrote:
thanks for your reply!
to answer some of your answers:
-i have all my channels go through auxes, in all projects, but i did attempt to route audio straight off the channels and encountered the same situation i described above.
-plug-in latency is likely set to ALL at all times, since i often track while in the 'mixing stage'. this is how i've always done everything.
ugh. the worst!
do you think there's anything in environment i might be able to swap around that might have gotten screwed up in the conversion?
thanks again.
I don't think it's an Environment issue, however, quite a few people have reported some corruption when importing Logic 9 projects, it usually takes the form of random Inspector Settings for Delay/Velocity and Preferences/Audio - Recording Delay being set to something other than 0 <zero>. This doesn't sound like your problem. Also sounds like your Plugin Latency setting (ALL) isn't the problem.. although if you're recording while mixing it should be set to Audio & Software instruments.
Have you used your hardware system successfully on an earlier version of OSX and Logic 9? If so then the answer is apparent, especially so if you notice it on projects started in Logic-X (current system) although it my take a certain level of project complexity before it shows up.

Open projects conversion RPM Items / cProjects and Business Partner

Guru's,
Do we have any SAP standard delivered objects for projects upload conversion (from excel sheets for example) for RPM Items and cProjects ? Please provide information, we have about 1000 to convert. We also have a custom tab for attributes, so wondering how to convert them without manual keyboard entries of each project.
Also, Business partners for RPM, do we have any BAPI available ?
thanks in advance ...
- RPM/cProject newbie

The bad news is that we had to write our own custom program to upload RPM items though we used SAP provided function modules /RPM/ITEM_MODIFY, /RPM/ACL_MODIFY, /RPM/DECISION_POINT_MODIFY, /RPM/FIN_GROUP_MODIFY
/RPM/CAP_GROUP_MODIFY, /RPM/SAVE_CHANGES ).

Projects Conversion

Hi Experts,
Apps Versio-- 11.5.10.2
RDBMS--- 9i
OS- RHEL 4.6
Sample script for approved cost budget conversion with different resource alias names under one project.
Thanks in Advance

Hi
There are API's to load projects, task, key members and classification.
There are also API's to load budgets for projects.
You should setup Templates directly in Oracle Projects.
You should develop you own program that call the API's.
Otherwise look at third party product that allows loading projects and budgets from excel.
One solution is Projects Wizard from More4apps.com.
Other might be a spreadsheet based product from Project Partners (projectp.com).
Dina

WinHelp Project conversion

Similar Messages

Maybe you are looking for