Winpe in recovery partition

i would like to know weather it is possible to have Winpe in Windows 7 recovery partition.This will help to avoid the need of bootable usb to rebuild the machine in future.Also due to some reasons we cannot do network pxe boot.
x drive - 100 mb,default
c drive - os
r drive - conatain WINpe file to boot incase of any need to rebuild the OS.this need to boot from WINpe and connect SCCM server for task sequence.
I have tried copying the contents of the sccm bootable media to the recovery partion and tried playing with bcdedit to create a entry.while i try to start computer i got 2 option one to boot from windows 7 and other to boot from recovery partition but while
booting from winpe i got error " unable to read task sequence configration disk".
Please help me and also i would like to know whether it is supported to have recovery partition with SCCM winpe which will be used to reboot and then connect to sccm server for task sequence and proceed.?
verification

i might be wrong, but short answer: no :)

Similar Messages

Problem with Recovery Partition(After i got a Virus)

Hi all,
I am using HP Envy 15 notebook with windows 7 home premium x64-bit installed.I didnt create the recovery disks since i got this notebook and what happened is that i got a virus from the internet but i almost repaired all system faults caused by it but the main problem for me is that it change all main drive folders name into Virus1232 for example (d:\recovery changed into d:\virus1234) and i spent hours over the internet to get the right folder and file names and i got them all but only one file not sure of.My problem is when i enter the Recovery Manager it doesn't detect any my recovery partition(but the virus isnt responsible for any file deletion it just caused some system changes) and just to speak i also corrected the folder and file names in c: drive since they are needed too.
These are the filenames i got in D: drive : bootmgr - BT_HP.flg - CSP.DAT - DeployRp.log - HPSF_Rep.txt - language.ini ; and the filename let is the one im not sure of: "HP_WSD.dat" (it is a zero-byte file).
The recoverymgrdump.txt works right untit "CSBRMgr::GetRPTOOLPartIndex leaving!"
then it tells me :
"Win32 System Info Code = 3, Info Message = The system cannot find the path specified."
and it also say :
"CSBRMgr::HpcdFlgIsExistInUP <UP>:\WINDOWS\hpdrcu.prc does not exist."
I dont know if that is normal but also the deployrp.log gives me this error:
"Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab"
ofcourse there are more errors in both files but i guess those are the most important.
So my question is: could the file attributes in d: drive be responsible for this error(i changed all attrbutes to be system hidden and read only)
OR
If anyone have a solution please tell me what to do.
Thanks.
This question was solved.
View Solution.

You are best to order a set of Recovery discs from HP, doi a full recovery using those.
You can order recovery media here
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
Or call HP on the phone to order a set.
USA
http://welcome.hp.com/country/us/en/contact_us.html
Everywhere else
http://welcome.hp.com/country/us/en/wwcontact_us.html

HT4718 How do I install the seperate system recovery partition after installing OSX on an external drive?

My Mac Mini (2011 - Mountain Lion) died on me and I'm trying to get Internet Recovery (or ANY recovery) to work. I have done the hold down D on boot hardware test and the extensive test and it says all is well. However Internet Recovery downloads (or appears to) and then I just get a never-ending spinning wheel and Apple logo.
I just installed Lion 10.7 from my older Mini that can't run Mountain Lion onto the newer Mini's hard drive as an external disk. How can I get the recovery partition added to that disk too?

Google recovery disk assistant. Hopefully that'll be what you need.

The guide to bootcamp assistant states that bootcamp can only be installed on a drive with a single partition. New Macs with Lion preinstalled have two partitions - the second is a recovery partition. How do I install Bootcamp?

Late in August 2011 I took delivery of a new 27" iMac with Lion preinstalled. I need to run Windows as well. Following Apple's written suggestion, I printed off the then current 12 pages of the document "Bootcamp Installation & Setup Guide" which clearly stated that the hard drive you were going to install on had to have on it, before install, a maximum of one partition. Using finder and disk utility I determined that there was only one partition. Unbeknownst to me, there was (is) an additional hidden (from those two pieces of software) partition on the disk. As of machines delivered new with Lion preinstalled, Apple has begun to include a "recovery partition". In that partition there is a copy of the software necessary to reinstall Lion via a download from the Apple App Store. Not knowing the partition was there, I cranked up "Bootcamp Assistant" which nicely offered to repartition my hard drive creating a "Bootcamp Partition" in addition to the existing. I told it how big to make each and hit the do it button, subsequently destroying my operating system. Oh, it very nicely told me, after the damage was done, how many partitions were REALLY on the disk and that I could not install Bootcamp cause there were too many partitions.
Luckily the the Recovery Partition, which at that point I knew existed, was not harmed and after doing some research on another compter, I used it to once again download Lion from the App Store and reinstall. So, I have recovered but am still stuck with the problem: how do I install Bootcamp in this new environment?

First you need to seriously back up your Mac.
A clone is an exact duplicate of your existing Mac HDD. Merely copying and pasting a drive will not make a bootable backup. In case of problems you can boot from an Ext HDD clone and use the utilities to repair, reformat, or clone the Ext HDD back to the internal Mac HDD. While Time machine back ups are easy you can not boot from it. The best thing to have for any kind of problem is a bootable clone backup on an external drive. Some even have two external backup drives in case one fails. There are two good apps for cloning named SuperDuper and Carbon Copy Cloner.
In dealing with the recovery partition a simple approach is to clone the Mac partition to an external disk then re-partition the Mac to a single partition (GUID partition table) . Then clone the external disk clone back to the Mac. You will now have only one Partition and Boot Camp assistant sould not object.
Some have recommended getting rid of the recovery partition while others have advised not to do this. If you have the Lion USB Thumb Drive you do not need a recovery partition so can discard it without concern. There is another way to get rid of the recovery partition if you decide to do it but first be sure to have a backup of your Mac ( I know I sound like a nagging mom but many dead computers have been saved by this simple precaution).
Use Disk Utility.
1) Make the Recovery visible in Disk Utility by using a program like Secrets:http://www.macupdate.com/app/mac/27025/secrets or MacPilot:http://www.koingosw.com/products/macpilot.php (15 day free trial).
2) Highlite the Recovery partition and Control click it and select Mount the partition.
3) With the Recovery partition highlited, erase the partition, you'll get an error message, ignore it.
4) Now highlite the top identity of the hard drive and select the partition tab.
5) Highlite the Recovery partition and press the minus sign.
6) Click and hold on the bottom edge of the partition above and drag it to the bottom, if it doesn't go there automatically, the press apply.

Factory recovery partition on windows 8 in Asus X551CALaptop

I purchased Asus x551CA notebook on 22nd Feb 2014. After about 45 days I formated hard disk partition
on which Activated Windows 8 operating systme was installed.I formatted an repartitioned HDD.
And I installed and uninstalled windows8 and windows 8.1 90 days enterprise evaluation edition. Because of
these link to factory recovery partition is broken.
I have created system image disks which are working to restore system. I forgot how I created these disks. May be
I did control panel>recovery>file history>windows 7 file recovery. So these disks should be System Image Backup.
I think these are not OEM recovery disks. When I insert these disks during reset and refresh I get a message
that "Media you inserted is not valid". And I am able to create system image on second partition of hard disk of
my laptop.I have also got product key of windows 8 by a program jellybean keyfinder.
To restore from discs created by me. I insert a repair disc then I go to UEFI settings. Then I change boot preferences to
boot from DVD. Then I go to Restore form images. Then computer asks me to insert my discs no from 1 to 4. One after the other. Then computer restore to windows 8. It looks alike as it was factory made.
-When I try to create a recovery drive by going to control panel> Recovery >create a recovery drive
Recovery drive dialog box appears but with grayed check box of "copy the recovery partition from PC
to the recovery drive". Please tell me how can it come with not grayed dialog box so that I can copy
recovery partition to USB pen drive? When notebook was new this check box was not grayed and I was able to
copy recovery partition on USB pen drive.
-Since I cannot copy recovery partition to USB therefore I also cannot reset and refresh windows 8 on
the basis of USB. It was working when notebook was new.
-And reset or refresh also not working on the basis of hidden recovery partition. How can it will start
working? It was working when notebook was new.
-I have tried diskpart command do make hidden recovery partition visible. But it becomes invisible
after restart. I used following command
1. Command Prompt Run as administer.
2. diskpart
3. list disk
4. select disk 0
5. list partition
6. select partition 6
7. assign letter z
by these commands hidden recovery partition becomes visible and again when I restart laptop it becomes invisible.
And I am not able to do anything with recovery partition E.G. copy the recovery partition to USB
When I created a system image using the following command I became able to refresh my PC. May be it was refreshing
on the basis of newly created image.
recimg /createimage D:\IMAGE81
recimg /setcurrent D:\IMAGE81
But it is also not working this time and it gives a message "Drive on which windows is installed is locked unlock it".
May because I installe AVG antivirus it locked the drive.
I also used REAgentC command
reagentc /setreimage /path F:\Recovery\WindowsRE\ /target C:\Windows /bootkey 4300
Maybe I executed above command once again I used D: instead of F:
And I was able to refresh PC but I was not able to Reset. And I was not able to copy recovery partition on USB
by going to control panel> Recovery >create a recovery drive.
Recovery drive dialog box appears but with grayed check box of "copy the recovery partition from PC
to the recovery drive".
((I am giving images of computer management in first_image no partition was created it was in factory made state. And
in second_Image I created an extra disk partition which is present on disk this time.)) I cannot give images because
of my account is not varified.
So I am giving output of diskpart command to understand disk partitions.
C:\>diskpart
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
Disk 0 Online 465 GB 1024 KB *
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 E DVD-ROM 0 B No Media
Volume 1 C OS NTFS Partition 186 GB Healthy Boot
Volume 2 D DATA NTFS Partition 130 GB Healthy
Volume 3 F DOWNLOADS NTFS Partition 128 GB Healthy
Volume 4 SYSTEM FAT32 Partition 100 MB Healthy System
Volume 5 Recovery NTFS Partition 900 MB Healthy Hidden
Volume 6 Restore NTFS Partition 20 GB Healthy Hidden
in the beginnig instead of D: (130 GB) and F:(128 GB) there was only one partition D:(258 GB) 130+128 GB.
Please tell me answers of following quesions:-
1. Tell me how to regain the link to factory recovery drive.
2. Please tell me how can I refresh and reset PC on the basis of Hidden Factory Recovery Partition. And how can I copy Hidden Factory Recovery Partition on USB and DVDs. I have 16GB USB pen drive and a DVD writer. So I can use these two storage media
only and except these I have 500GB HDD on my laptop.
4. I want to know that Factory recovery partition is useful or not. Should I delete it.
3. I have DVDs as I said above. On the basis of these I can reinstall windows 8. When I created these discs windows 8 was present on laptop. Currently windows 8.1 is present on laptop. Please tell me how can I create my own hidden recovery partition for
windows 8. I have upgraded to windows 8.1. So please tell me can I create my own hidden recovey partition for windows 8.1.
5. Can I download contents of factory recovery partition from internet.
6. Should I go to shopkeeper. He repairs computers as well. Probably he will manage for me to get Recovery partition discs. In this case these DVDs may be different from my DVDs as I mentioned above. Maybe only thing I get from these discs that I will
able to reset and refresh computer.
7. Microsoft shoult create a program that can re-establish link to factory recovery partition. And this program should be able to create new hidden recovery partition as well. As I have upgraded to windows 8.1. So I think I should have a new hidden recovery partition
for Windows 8.1. I think I can above thing my other way. If I create new set of DVDs by going to control panel>recovery> file history>System Image Backup. It will create discs for windows 8.1. And I will able to restore system to windows
8.1 by these discs. And for windows 8 I have already discs. But these discs will only work by changing boot options(by choosing UEFI) and image recovery. And reset and refresh functions will not work then in such situation factory recovery partition
will become useless. Then such situation I should delete factory recovery partition as it is useless.
8. At beginnign I also tried AI recovery burner. After trying it for 2-3 days I came to know that AI recovery burner is not for windows 8. There should be a tutorial for these thing so that people like me not waste their time.

I used a software named UNDELETE on my hidden recovery partition to recover it. I get some files by this software. Important thing is that I got a 2.84 GB file named 00eebc9d.rb in dir D:\recovered1\Files Detected by their Signatures\Unknown Application\.rb.
This file may be useful. Please suggest me how can I use these files to reset and refresh my OS. I used some dir commands as follows to get list of these files:
dir /s >f:\list.txt
dir /s /a:s >f:\list2.txt
Some files were system files so these file were not shown by first dir command. So I used second dir command.
Output of dir /s >f:\list.txt
Volume in drive D is DATA
Volume Serial Number is 9A82-D42B
Directory of D:\recovered1
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
29-07-2014 19:08 <DIR> $Extend
29-07-2014 19:06 <DIR> Files Detected by their Signatures
29-07-2014 19:06 <DIR> Recovery
29-07-2014 19:08 <DIR> System Volume Information
0 File(s) 0 bytes
Directory of D:\recovered1\$Extend
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
29-07-2014 19:08 <DIR> $RmMetadata
0 File(s) 0 bytes
Directory of D:\recovered1\$Extend\$RmMetadata
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
29-07-2014 19:08 <DIR> $TxfLog
0 File(s) 0 bytes
Directory of D:\recovered1\$Extend\$RmMetadata\$TxfLog
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
29-07-2014 17:36 65,536 $TxfLog.blf
29-07-2014 17:36 10,485,760 $TxfLogContainer00000000000000000001
18-04-2014 00:18 10,485,760 $TxfLogContainer00000000000000000002
3 File(s) 21,037,056 bytes
Directory of D:\recovered1\Files Detected by their Signatures
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 19:05 <DIR> Firefox
29-07-2014 19:05 <DIR> Internet Explorer
29-07-2014 19:05 <DIR> Pick an app
29-07-2014 19:05 <DIR> Unkown Application
29-07-2014 19:06 <DIR> Windows Photo Viewer
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Firefox
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:05 <DIR> .xml
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Firefox\.xml
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 18:59 1,091 00000150.xml
29-07-2014 18:59 1,336 005f05b0.xml
29-07-2014 18:59 1,091 005f05b8.xml
29-07-2014 18:59 488 015c7e34.xml
29-07-2014 18:59 472 015d68fd.xml
29-07-2014 18:59 472 015d6bc3.xml
6 File(s) 4,950 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Internet Explorer
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:05 <DIR> .gif
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Internet Explorer\.gif
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:01 2,428 003aca99.gif
29-07-2014 19:01 814 0047c75d.gif
29-07-2014 19:01 472 00b2846d.gif
3 File(s) 3,714 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Pick an app
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:05 <DIR> .cab
29-07-2014 19:05 <DIR> .ico
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Pick an app\.cab
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 18:59 17,317,845 000c98e2.cab
29-07-2014 18:59 92,631,005 0027defd.cab
29-07-2014 18:59 7,539 00334cf3.cab
29-07-2014 18:59 15,731 0066bf8e.cab
4 File(s) 109,972,120 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Pick an app\.ico
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 18:59 4,534 0027d8d6.ico
29-07-2014 18:59 4,534 0027d8df.ico
29-07-2014 18:59 766 0027d8eb.ico
29-07-2014 18:59 766 0027d8ee.ico
29-07-2014 18:59 766 0027d8f2.ico
29-07-2014 18:59 4,534 0027dbef.ico
29-07-2014 18:59 10,134 0027dbfb.ico
7 File(s) 26,034 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Unkown Application
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:05 <DIR> .ogg
29-07-2014 19:05 <DIR> .rb
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Unkown Application\.ogg
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 18:59 194,667 00369b71.ogg
29-07-2014 18:59 173,149 0036b2a1.ogg
29-07-2014 18:59 13,178 0036b527.ogg
29-07-2014 18:59 19,244 0036e009.ogg
29-07-2014 18:59 169,220 0036e18a.ogg
29-07-2014 18:59 114,800 0036f031.ogg
29-07-2014 18:59 22,325 0037003d.ogg
29-07-2014 18:59 42,628 003703fd.ogg
29-07-2014 18:59 319,493 00370bc2.ogg
29-07-2014 18:59 68,812 00373cfa.ogg
29-07-2014 18:59 89,541 00373e29.ogg
29-07-2014 18:59 65,697 00375384.ogg
29-07-2014 18:59 42,955 00376d11.ogg
29-07-2014 18:59 85,254 0037847f.ogg
14 File(s) 1,420,963 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Unkown Application\.rb
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:01 3,058,238,593 00eebc9d.rb
1 File(s) 3,058,238,593 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Windows Photo Viewer
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 19:06 <DIR> .jpg
29-07-2014 19:06 <DIR> .png
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Windows Photo Viewer\.jpg
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 18:59 12,296 0027dbce.jpg
29-07-2014 18:59 41,093 003933da.jpg
29-07-2014 18:59 25,067 00396fae.jpg
29-07-2014 18:59 2,303 003c5891.jpg
4 File(s) 80,759 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Windows Photo Viewer\.png
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 18:59 64,902 0035b639.png
29-07-2014 18:59 530 0039c185.png
29-07-2014 18:59 556 003be59e.png
29-07-2014 18:59 1,023 003ed468.png
29-07-2014 18:59 1,704 003f1ec0.png
29-07-2014 18:59 624 003f252a.png
29-07-2014 18:59 13,777 0043a2c0.png
29-07-2014 18:59 2,897 00441e87.png
29-07-2014 18:59 2,915 00442a6c.png
29-07-2014 18:59 2,973 00442b91.png
29-07-2014 18:59 468 004433ca.png
29-07-2014 18:59 363 00443501.png
29-07-2014 18:59 238 00443be0.png
29-07-2014 18:59 331 00443fd9.png
29-07-2014 18:59 457 004442ad.png
29-07-2014 18:59 2,868 004444a7.png
29-07-2014 18:59 268 004446af.png
29-07-2014 18:59 280 004448d1.png
29-07-2014 18:59 257 004449f1.png
29-07-2014 18:59 2,158 00b962d1.png
29-07-2014 18:59 54,191 016a8a54.png
29-07-2014 18:59 4,224 017350e3.png
29-07-2014 18:59 4,241 01735f08.png
23 File(s) 162,245 bytes
Directory of D:\recovered1\Recovery
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 19:08 <DIR> Logs
29-07-2014 19:08 <DIR> WindowsRE
0 File(s) 0 bytes
Directory of D:\recovered1\Recovery\Logs
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
0 File(s) 0 bytes
Directory of D:\recovered1\Recovery\WindowsRE
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
0 File(s) 0 bytes
Directory of D:\recovered1\System Volume Information
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
0 File(s) 0 bytes
Total Files Listed:
65 File(s) 3,190,946,434 bytes
65 Dir(s) 178,172,325,888 bytes free
dir /s /a:s >f:\list2.txt
Volume in drive D is DATA
Volume Serial Number is 9A82-D42B
Directory of D:\recovered1
17-04-2014 23:37 2,560 $AttrDef
17-04-2014 23:37 0 $BadClus
17-04-2014 23:37 655,680 $Bitmap
17-04-2014 23:37 8,192 $Boot
17-04-2014 23:37 67,108,864 $LogFile
17-04-2014 23:37 262,144 $MFT
17-04-2014 23:37 4,096 $MFTMirr
17-04-2014 23:37 0 $Secure
17-04-2014 23:37 131,072 $UpCase
17-04-2014 23:37 0 $Volume
10 File(s) 68,172,608 bytes
Directory of D:\recovered1\$Extend
17-04-2014 23:37 0 $ObjId
17-04-2014 23:37 0 $Quota
17-04-2014 23:37 0 $Reparse
01-05-2014 09:24 0 $UsnJrnl
4 File(s) 0 bytes
Directory of D:\recovered1\$Extend\$RmMetadata
17-04-2014 23:37 0 $Repair
1 File(s) 0 bytes
Directory of D:\recovered1\$Extend\$RmMetadata\$TxfLog
17-04-2014 23:37 100 $Tops
1 File(s) 100 bytes
Directory of D:\recovered1\Recovery\Logs
30-04-2014 06:12 1,336 Reload.xml
1 File(s) 1,336 bytes
Directory of D:\recovered1\Recovery\WindowsRE
18-06-2013 20:38 3,170,304 boot.sdi
29-04-2014 17:13 1,091 ReAgent.xml
26-04-2014 23:06 255,077,005 Winre.wim
3 File(s) 258,248,400 bytes
Directory of D:\recovered1\System Volume Information
18-04-2014 00:19 20,480 tracking.log
1 File(s) 20,480 bytes
Total Files Listed:
21 File(s) 326,442,924 bytes
0 Dir(s) 178,172,325,888 bytes free
Kindly guide me how can I use my hidden recovery partition to reset and refresh by use of these files.

How do I install a Lion Recovery Partition

I recently installed a new Hard Drive in my Early 2011 Macbook Pro, and I was wondering if there was any way I could out the Lion Recovery Partion on it.
Thanks In Advance

CCC Carbon Copy Cloner has a utility called "Disk Center" that is included with CCC that will create a Recovery Partition for you. I understand that CCC is not free, but it does have a free 30 day trial.
The "Disk Center" in CCC Carbon Copy Cloner is not obvious or easy to find, unless you know where to look for it (in the Window menu pulldown)... it's easy to miss. Once you find it in the CCC menu system, it is a quick (<5min) turnkey way to create a Recovery HD Partition on any disk, internal or external.
I thought I should share this, since I burned several hours of pain-staking research and experimentation in search of how to create/re-create a "Recovery HD" Partition for my MacBook Retina Mavericks laptop. My journey was varietal, including:
Successfully using a manual set of instructions with Terminal to execute a multi-step approach that worked ( http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html )
As well as a utility from musings.slivertooth.us that worked for me as advertised. Only problem is that while I appreciate and respect the great utility that guy created, my risk-averse nature prevents me from using a non-commercial utility to muck with the low-level details of my boot drive. Great job, but I prefer CCC since it's backed by a commercial SW company. Here's his great uility, as referenced in Apple discussion threads like this one: ( http://musings.silvertooth.us/2012/03/restoring-a-lost-recovery-partition-in-lio n/ )
Therefore, I was relieved to discover that CCC has a utility specifically designed to do this for me.
FYI: How did I find myself in this position? I lost my Recovery HD partition because I used Super Duper to Clone my HD/SSD, and subsequently restored my MacBook at one point. Super Duper has worked awesomely well for me for several years. It clones HDs/SSDs without a glitch, and makes them bootable automatically. The only gap or lack of function I have discovered is that "Super Duper" does not Clone the "Recovery HD" Partition. CCC Carbon Copy Cloner does. So, while I like Super Duper, I'm switching to CCC Carbon Copy Cloner for my backups from now on.
Disclaimer: I don't work for CCC. I'm just an I/T Professional that needed to figure out how to create/re-create a Recovery HD Partition...

Can't boot from recovery partition in Mountain Lion

I've installed Mountain Lion on two different boxes so far: a 20" iMac at home and a Mac Mini at work. Both had up to date Lion installations prior to the upgrade. After installing Mountain Lion I am not able to boot in to the recovery partition on either one. Whether I hold down Command-R to go directly to the recovery parittion, or simply hold down Option to get a choice of boot devices, I am taken directly to the login screen.
The recovery partition is there on both boxes, and I can mount it and examine it using 'diskutil' from the command line. I created a USB image of the recovery partition on the iMac, and the Startup Disk control panel allowed be to select it as a boot device, but the box (both boxes, actually; I also tried it on the Mini) booted directly to the login screen.
I honestly don't know whether I could boot to the recovery partition prior to upgrading to Mountatin Lion or not. When I first installed Lion on the iMac I did not get a recovery paritition, but Apple sent me a USB drive and after cleaning up the disk (getting rid of an unused Boot Camp partition) I was able to get a clean install with a functioning recovery paritition. However I never booted from it after confirming that it worked.
Anyone else see anything like this? Or have an idea how to fix it?
- Larry

Ok but you can get the Option key to work.
There is a utility to Rebuild the recovery HD partition.
Look here first.
Removing and rebuilding a malfunctioning Recovery HD partition « Der Flounder
Then in that article a link to download or find the Recovery HD utility on the Apple website.
But that was originally for Lion. So you may have to rebuild the Lion R-HD then Reinstall Mt Lion over the top of your current install of Mt Lion for it to make the Mt Lion R-HD.
Depending on the age of your Mac's you may also be able to use the Online (Internet) Recovery HD system. To get to that with a R-HD partition on the system, even if that R-HD partition sin't working, you hold down Command+Option+r keys when starting the system (And yes with the USB keyboard attached).

How can I see the files in the Recovery partition folders? Explorer won't let me.

I am preparing to do a clean install of Windows 7 onto a hard drive that shipped with Vista Home and the Recovery partition. I want to reuse the recovery tools along with Windows 7 in the recovery partition. Windows Explorer won't display the contents of the recovery folders. How can I overcome this?
Thanks,
Luke

Force it into recovery mode to restore it as explained here: If you can't update or restore your iPhone, iPad, or iPod touch. Sometimes you have to do this more than once to be successful. After restoring, you'll have to restore an existing backup, if you have one.

Re: Unable to use the recovery partition on Satellite L505D

Hello.
I am trying to help a friend with their Satellite L505D that had a serious virus issue(s). I was not able to run/install any programs with the virus on it. I used a Microsoft tool to remove the rootkit trojan, but I still had virus issues. I also lost most of the programs on the machine. All the folders were empty (except for some games), so I could not access any tools that way. I could not get the machine to load any Toshiba restore utility by pressing Zero while powering on. I accessed some recovery options using F8 during bootup, and had a link to restore to Toshiba's original setting, but clicking that choice did nothing other than pause for a few seconds. I waited several minutes, clicked it again, rebooted and tried again. Nothing. As a side note, once during all this, the restore partition was visible from explorer.exe. Not before, or since.
So I then Reformated the computer with a Win7 Home Premium 64bit upgrade disk (leaving the restore partition intact), and entered the key for the system. Supprise supprise, it is asking me to activate within 3 days.
My basic question is, can I access that recovery partition in a different manner to attempt to use it? IE copy it's contents, or boot to some comand prompt to log to e:?
Thank you in advance for any suggestions.

> Is a recovery disk from another computer using Win7 Home Premium 64-bit usable?
Generally speaking yes BUT this second notebook must be 100% identical with same model number (PAxxxx).
> Or if not, am I left with either ordering recovery media from Toshiba, or wiping the entire HDD and installing another licensed version of Win7?
Exactly. To be honest better option is to order original Toshiba recovery disc.
You can order it under https://backupmedia.toshiba.eu/landing.aspx
For 30 euro you will have original disc that you can use anytime you want. This disc has OS with valid licence, all necessary drivers.
It is also simplest way to have all properly installed. With 5 mouse clicks and after 2 hours only notebook will have factory settings again.

Satellite L745D-S4214 Does not boot; HDD recovery partition not working

I tried to apply the recent windows 7 updates and my laptop no longer boots. I tried to press F12 and select the HDD Recovery partition, but it does not boot regardless. There is a message that it does not communicate to a specific device. I believe the address called out was 0xc0000e9, but I am going by memory. I never created a recovery CD because I thought I was covered by the HDD partitions. This was purchased on 10/26/2012, so it should still be under warranty.
PLEASE HELP!

Hi I'm going to assume that your recovery works like mine and that the recovery partition is still good and not corrupted.
Shut down your PC. Press F12 and select HDD recovery. Click enter. This should start the recovery from the hidden recovery partition.
PS I would advise you to make the recovery discs or USB recovery Try this first.
Perform a power cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with boot problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Remove the battery (if the model has a removable battery).
Unplug all wires or peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Hold down the power button for thirty seconds.
Reattach the battery.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Try starting the computer.
If your laptop starts normally now, you're done!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Windows 8.1 update added a recovery partition now the recovery function won't work.

After the latest 8.1 update, an extra recovery partition as added to the C: drive. A few other things got messed up so i decided to reset to factory original. To my surprise the HP Recovery Tools no longer work. If I hit F11 I get a 0xC0000225 error where the device isn't avaialble. I can see the recovery partition with the WINRE partition but I think the computer doesn't know where the partition is. I'm on an DV6-7211 with Windows 8.1 update. Anyway to tell the F11 function where the WINRE drive is? Since HP didn't seem fit to give me recovery media in my box I have no way to revert back to factory original. SInce there is a liscense for Windows 8 included, I don't feel like spending the money to buy a new operting system. Recovery media is way too expesive.

You might try making a Recovery set with the software included on your machine-though it may not work now either. Creating Recovery Media >> Windows 8
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

PLZ helpppppppppppppppppppppppp want to roll back "active" of the recovery partition...

Hi,
I need serious help,,,,,,any help is appreciated :
--- I believed my second hard drive is burnt , but it was not ( not able to access it, it was because i had changed the workgroup in NTFS),
--- at this stage my windows 7 would boot normally , but like a new user, no access to previous files
--- so tried to do restore,    F11 showed there were no previous saving for restore
--- tried to do recovery , F11 showed that "restore" botton is gray/ inactive
--- someone on internet suggested to make the recovery partition , "active", so i did it through disk management
--- then when windows boot up, it went directly to previous recovery page with inactive botton,, i can not access my previous windows , i can not boot up to windows again
--- so now it boots up and goes to useless recovery page
--- through bios activated "HP Quick web" , and playing with photo viewer in quickweb i noticed all my files on the "maybe burnt drive" are all there!!!!    and i can view them,,,,,,,   ooops!!! my whole problem was changing windows group!!
---   so if i can just boot to previous windows , then i can change the group and access the files...but
--- now i cant go out of recovery page,,,,, now that it is "active partition" everytime i turn on computer is JUST goes to recovery page screen (which is inactive),,,,,,,,,,,,,,,,,,,,,,,,,,
--- how can i roll back, or inactive the recovery partition and use my drive "C" previous partition as the only active one
I dont have recovery CD (I will get it tomorrow, i ordered it by HP, 30 bucks! phewww),,,,,,,,,
i am panicked any help would be deeply appreciated.........................................................
HP Pavillion DV-7 4069
Windows 7 Home Premium

Hi,
If you don't already have one, use another PC to create a Windows 7 Recovery CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD. Once created, or if you already have this, insert the CD and restart to boot from it. Select the Repair option.
Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
http://www.sevenforums.com/tutorials/668-system-recovery-options.html
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Recovery partition deleted and formatted

Hello
I have accidentally deleted recovery partition of my compaq presario cq61 (win7 home premium 64bit) while trying to install another operating system. Before the accident I had the C drive and the D drive marked Recovery, now after deleted the other operating system I have the C drive and a D drive marked as System.
It's possible to recover this partition from an image back-up I made before?
Thanks
This question was solved.
View Solution.

Hi Michele,
Recovering the recovery partition is not that likely to be a possibility with a free program. The chances of restoring it from the windows backup is also quite slim.
If your brother's notebook is absolutely identical then using it is a viable solution to the problem. If it is not identical then it will be a waste of time as the recovery manager itself will refuse to work.
The best option is to use a recovery disk that is made specifically for or created by your notebook. $30.00 is a lot cheaper than purachasing an operating system.
You can backup the current disk partitions with a program like the Paragon program I provided you a link to in an earlier post. At least that way you will have a reliable image of the current situation on your notebook's hard disk.
You can also legally reinstall Windows by using the Microsoft Windows license on the certificate of authenticity on the bottom of your notebook.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problem creating Mtn Lion Recovery partition on external drive.

USB external. Newly erased, three partitions: one 2GB for Recovery HD, other two backups of my old SL machine and new ML machine (Mini). Those work and their respective machines fine. Drive seems OK.
    Used Recovery Disk Asst v. 1.0 to create Recovery HD on the small partition while booted into 10.8.2 (the brand new Mini). Factory installed Mtn Lion Recovery HD exists on internal drive and it works— when starting with command-R or command-shift-R, not with Option key.     Install of Recovery HD to external seemed to go fine and doing a "diskutil list" in Terminal showed both the internal and external Recovery HD's, properly named as such.   However, when restarted with Option down the recovery partition showed up named the same as my internal— at that point "Macintosh HD" but later when I changed the internal's name, reinstalled the Recovery HD, and restarted with Option key the recovery partition now was named the same as new internal drive name.   Both times choosing the recovery partition resulted in booting into internal drive.
Was wondering if anyone had a similar problem— and found solution/reason.   Apple Tech Support particularly not helpful/knowledgeable on this subject.

Hi Baltwo
   Really appreciate the help.   Many thanks.     Finally seems to be working.     Not sure exactly what worked but in case you're interested I'll give you a, hopefully, short summary:
Using DU (after copy/paste of the command you wrote above into Terminal) I cloned the working internal drives RDH to the partition for it on the ext.   Failed— still seemed to work as almost an alias pointing at the boot volume on the internal.
So, erased the external again; didn't partition, did a reinstall of ML from DU while booted into RDH of internal. Then started from that new ML partition on external and let Setup Asst migrate everything over from the internal to keep Users/Permissions from being a problem.
    When that finished I tried to restart w option key.   Got a recovery HD that was called exactly that but, again, booted into internal boot drive.   Booted into internals RHD just to make sure it was OK and it was.
   For whatever reason again restarted w option key.   This time I got four choices: the boot volume of internal and external, an ext volume called Recovery HD (the trickster), and another volume called Recovery 10.8.3.   Something new— and, as Bill Murray said in Ground Hog Day, "anything new is good."   So I tried booting into that new RHD 10.8.3. (Note, I'm still running 10.8.2 on boot volumes.)
And that worked— booted into Recovery HD but no way that I could figure to see for sure that it was the Recovery HD on ext vs. on internal.   I think I need to activate the Debug menu on the RHD DU so I can choose the 10.8.3 recovery and see if I have the option of Repairing the disk or it's greyed out. If greyed, then proves I'm booted into it.   Might be a more elegant way to see that but it's the one I know.    Still, I assume I was in the RHD on the external.
Then made a second partition for the old mac's backup and that initially resulted in the boot volume of the internal backup not be mountable but after a restart or two testing the two RHD's, the mini decided to see all the volumes and things are, for the moment, copacetic.
Hope that wasn't too long and boring.    From my experience and reading on the 'net, my general sense is that there are a bunch of variables that all have to be right for this process to work. Probably less is more and just installing ML on a disk by itself will be the most reliable method, if most wasteful of data storage.
Regardless, couldn't have done it without you, baltwo.   I don't use this forum enough to know what the etiquette and protocols are but I marked all of your posts as useful, which they were, and, finally, as solving my issue, which they did.
Thanks again

How do I restore a Windows Backup Server backup recovery partition?

I'm trying to test restoring a backup from our real server on a temp server.
First, I was surprised it can't do a restore to a smaller drive because the original server is only 1/3 full (it wants to restore all the empty bytes too).
Also it appears it wants to see that target partitions are already created.
It wants to restore recovery to an EXISTING recovery partition and OS to an existing OS partition all with exact sizes.
What if the old system died and I had to go to something new?
Do I have to preinstall 2012 R2 on a bare drive so it creates the partitions?
I've been down this path before, if it's not byte for byte match (offsets and all) it won't boot.
I'm pretty sure I could restore just the OS partition and then do a Windows Repair which would move the master boot record onto the OS drive. But that seems wrong.
What's the proper way to restore?
Is Windows Backup Server to limiting?

Hi,
1. When trying to recover a partition, it requires a same or larger target partition. If you only backup data, there is no size limitation of the target partition.
2. We need an operation system to do the recovery. However you can perform a Bare Metal Backup so it could be restored without operation system - but it may force to backup more than partition C.
If you have any feedback on our support, please send to [email protected]

Winpe in recovery partition

Similar Messages

Maybe you are looking for