WinPE NIC driver for Lenovo ThinkCentre M72e (4004)
I am trying to deploy our windows image to a new group of Lenovo ThinkCentre M72e (4004) when they pxe they would just reboot. I pxe booted again and hit f8 did an ipconfig and no network address. I know the NIC is a relteck so I went to the
site download the nic drivers for windows 7 and imported them and updated by boot image.
http://support.lenov...&DocID=HT073565
But I still PXE and get no ip address I am on the same vlan as my server and when I login to another computer on that port I get an IP. So I am pretty sure I have a driver issue. I loaded that driver in windows 7 and it is defiantly the right driver
for the model.
Can someone help me out thanks.
lipanitech | http://www.allamericancomputerrepair.com | A+,Network+,Linux+,Security+,MCTS,HP Pro
Hi guys. I hope this helps you. This is the file you need for the Lenovo M72e. I have successfully deployed this with ConfigMgr 2012 RTM
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Similar Messages
-
Winpe nic driver for elitenook 800 series
I'm having problems getting the mic driver for the new 800 series (840 & 850) laptops from HP.
I downloaded the pe drivers from the HP website (as well as the win7 ones and some direct from Intel) but even though these get added to the boot.wim files the driver doesn't seem to load and when booted into pe we end up with no network access.
I've tried loading the driver manually through the command prompt when in pe and still don't get anywhere. I've seen posts on the 2012 boards and people seem to have had success, but I think they are able to use the win8 drivers which 2207 won't let
you import......
Any ideas that anyone has will be appreciated!
MattHi guys. I hope this helps you. This is the file you need for the Lenovo M72e. I have successfully deployed this with ConfigMgr 2012 RTM
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Pls i need help for audio driver for lenovo 3000 j series
hello, can sombody help me to find driver for lenovo 3000 j series audio driver.
i did format to my computer and reinstall windows XP and now i don't have audio, i already downloaded all drivers from lenovo website and nothing is working. pls pls help. thank's.If you are using Windows Vista go to All Programs/Palm and click on the folder and select Hot Sync Manager and then try to sync with the USB cable. If you are using the Windows XP go to Start/Programs/Palm/Hot Sync Manager and then try to sync. If you don’t have the palm folder at all on your PC you have to install it. Here is the link http://kb.palm.com/wps/portal/kb/common/article/33219_en.html that version 4.2.1 will be working for your device Zire 72.
-
Hi,
is anyone of u have the installer for the VGA driver ( for lenovo 3000 H100 5310-2AA) ??
or if u know where to download it pls tell me..
I tried download from the lenovo's official website but it didn't work, I dunno why?
it says "the nvidia setup program couldn't located any driver that are compatible with your current hardware. Setup will now exit"
I confuse now.. I didn't upgrade or change any hardware since I bought it..
thxyou seem to install Nvdia when you must have been using intel's drivers.
check out this link once
http://www-307.ibm.com/pc/support/site.wss/product.do?doccategoryind=121202&template=/productpage/la...
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
I have a ThinkCentre M72e (Windows &) with a blinking cursor on the top-left corner.
The drive seems to work when connected as a slave to a Windows XP machine.
I believe the OS is corrupt. How would I restore the machine to it's "out-of-the-box" configuration?
Thanks.Ah so. No worries, you can buy 8GB single module and add another one later. You could even use one of existing 2GB modules for total 10GB. 2x4GB vs 1x8GB - performance delta is minor for vast majority of uses. And if you ask me - 10GB (8GB + 2GB) is better than 8GB (2x4GB)
Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer. -
Hi,
I have Lenovo G770 with model number 1037.
I want to replace my 750 GB HDD with some good SSD drive for performance reason. can you please tell me if there is any good SSD Drive which would go best with Lenovo G770.
Regards
Aaqib
Solved!
Go to Solution.hi aqibarain,
Welcome to the Lenovo Forums.
Depending on your budget, consider the following in purchasing an SSD:
- SSD Brand
- NAND (MLC, TLC, SLC) / NAND Controller
- Firmware updates
- Reviews on the drive (Reliability / MTBF, Warranty, etc.)
I personally use an OCZ Vertez 450 as it fits my budget without sacrificing the speed but check this list for more choices.
More info:
MLC, eMLC, SLC, TLC
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Help! Need driver for Lenovo webcam model 12-80401
Can anyone give me a link where i can download the driver software for my webcam? I just re-imaged my laptop before going out of town and loaded all my software except that :-(
Thanks,
BruceHi and welcome to the forum R-707!
*60 series never came with camera, lenovo started camera option with *61 series, what this means is that your system doesn't have integrated camera...
Hope this answers your question.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel -
Hello,
I have a T23 2647-BG9 and looking for drivers for Debian Linux. But i cant find any one
one the lenovo website.
Can anybody help me ?
Friendly regards
WitcherDepends on the distro, users may sometimes have to call up the NIC connection as LAN is disabled on-start. Most distros now include a script which verifies whether a connection is possible via LAN - if not, then the card is disabled until you connect a cable to it. As mentioned earlier, the linux kernel carries all the information a user would need for (older) NIC cards, so there's no need for additional driver downloads.
Glad it worked out for you! -
[REQUEST] rtl8723au_bt bluetooth driver for lenovo yoga 13
Hello.
I have a lenovo yoga 13 laptop with 8723 wireless card.
Wifi is working bacause of dkms-8723au-git package. As I know, in 3.15 kernel it will work out of the box and lwfinger will no longer maintain this source code.
Bluetooth is not working and there is no bluetooth driver in aur. It is required to install another package from here https://github.com/lwfinger/rtl8723au_bt.
I cannot build this package, because when I run make command it ends with error make[1]: *** /lib/modules/3.14.4-1-ARCH/build: No such file or directory. Also there was written about no dkms support in code. But I cannot fix it, because I am still noob in Archlinux. And for some reason it is written "Support kernel version 2.6.32~3.13.0" in readme.txt. I have already 3.14.4-1-ARCH kernel.
Could anyone help me to fix that and make aur package for other people to get bluetooth work on lenovo yoga 13?I think bluez5 is ok, because when I run bluetoothctl it can detect my cluetooth controller now. However, I cannot start working with it
[ndr@yoga ~]$ sudo bluetoothctl
[sudo] password for ndr:
[NEW] Controller 2C:D0:5A:DF:60:07 yoga [default]
[bluetooth]# help
Available commands:
list List available controllers
show [ctrl] Controller information
select <ctrl> Select default controller
devices List available devices
paired-devices List paired devices
power <on/off> Set controller power
pairable <on/off> Set controller pairable mode
discoverable <on/off> Set controller discoverable mode
agent <on/off/capability> Enable/disable agent with given capability
default-agent Set agent as the default one
scan <on/off> Scan for devices
info <dev> Device information
pair <dev> Pair with device
trust <dev> Trust device
untrust <dev> Untrust device
block <dev> Block device
unblock <dev> Unblock device
remove <dev> Remove device
connect <dev> Connect device
disconnect <dev> Disconnect device
version Display version
quit Quit program
[bluetooth]# version
Version 5.19
[bluetooth]# power on
Failed to set power on: org.bluez.Error.Blocked
[bluetooth]# list
Controller 2C:D0:5A:DF:60:07 yoga [default]
[bluetooth]# devices
[bluetooth]# show
Controller 2C:D0:5A:DF:60:07
Name: yoga
Alias: yoga
Class: 0x000000
Powered: no
Discoverable: no
Pairable: yes
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
Modalias: usb:v1D6Bp0246d0513
Discovering: no
[bluetooth]# select 2C:D0:5A:DF:60:07
[bluetooth]# power on
Failed to set power on: org.bluez.Error.Blocked
[DEL ] Controller 2C:D0:5A:DF:60:07 yoga [default]
[NEW] Controller 2C:D0:5A:DF:60:07 yoga [default]
[bluetooth]#
Ok, it is not powered on. In troubleshooting section in wiki there are some instructions about such situation. I do all as described in wiki:
[ndr@yoga ~]$ hciconfig -a
hci0: Type: BR/EDR Bus: USB
BD Address: 2C:D0:5A:DF:60:07 ACL MTU: 820:8 SCO MTU: 255:16
[b]DOWN[/b]
RX bytes:558 acl:0 sco:0 events:28 errors:0
TX bytes:355 acl:0 sco:0 commands:28 errors:0
Features: 0xff 0xfb 0xff 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
[ndr@yoga ~]$ hciconfig -a hci0 up
Can't init device hci0: Operation not permitted (1)
[ndr@yoga ~]$ sudo hciconfig -a hci0 up
[sudo] password for ndr:
Can't init device hci0: Operation not possible due to RF-kill (132)
[ndr@yoga ~]$ rfkill unblock all
bash: rfkill: command not found
Could you please tell me where to dig next. Why there is not rfkill command? -
Need for Adobe Air for Lenovo ThinkCentre
Sorry new to this so please excuse any gaffs.
I have a ThinkCentre desktop for 3 months and get a popup notice that some Lenovo program needs Adobe Air to run. I do not like Adobe and use other alternatives and do not want Adobe Air installed on machine. What programs does Lenovo use that uses Adobe Air? Would it be catastrophic if I un-installed the Lenovo program that requires Adobe Air? Obviously it has not stopped me so far from using the machine but I would like to stop the popup messages.
Thanks,
PerplexedHi Perplexed, welcome to the forums,
the application you are looking for is I believe Lenovo Solution Centre. Uninstalling it would not imho be a catastophic failure; not having it will not effect the system. As to the merits of it being worth keeping, or not, is fully you decision.
About Lenovo Solution Centre
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Missing CD(graphics driver) for LENOVO G460. help!
hi.. I have a problem. I lose the cd of my graphics driver and my laptop has been reformatted. now, its really working too slow..help me please..
Hello kaye_lani and welcome to community,
You do not need to worry if you do not have the driver disc then you can download the drivers from the Lenovo website.
http://consumersupport.lenovo.com/in/en/driversdownloads/APR_Driver_List.aspx?CategoryID=880973&OS=0
If you face any issue in downloading or choosing the right video driver then share the Operating System detail and serial number with me in Private Message as I will share the exact video driver link.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I am left with two unknown devices in Device Manager. It appears to be the Intel Management Engine Interface Driver, which is unavailable in Update Retriever. I see it on the website as gars04ww.exe.
Please add this to the repository.
Thanks,
Hans
Hans LimaThe other one is the Realtec Card Reader gaxm05ww.exe
Hans Lima -
Need Driver for Lenovo Yoga Tablet 2 10.1" Window 8.1
I can't access to support page, it's always 'Page not Found' My device driver's lost, missing, can't touch screen to do anything (Now using with Mouse and Keyboard from OTG USB) Please, Give me a Driver to install Thanks
Link to image
Hey!, no one can help?
Where is Support Team?
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
-
Trying to install nic drivers for solaris 10 on x86 machine
i am trying to install nic drives for sis 900 downlaoded from http://homepage2.nifty.com/mrym3/taiyodo/eng/
i am following the instruction in the readme file but when i reach
(5) Make links to correct binary directory and Makefile according to your
configuration. i386 and gcc are default.
% cd /.../sfe-x.x.x
% rm obj Makefile
% ln -s Makefile.${KARCH}_${COMPILER} Makefile
% ln -s ${KARCH} obj
where ${KARCH} is the result of `isainfo -n`, and ${COMPILER} is
"gcc" or "suncc" which you want to use to make the driver.
when i execute the command
ln -s Makefile.i386_gcc Makefile
it gives me an error
what should i dohi, your files and folders may be named by UPPER symbols. Rename them by LOWER symbols.
goodluck !!! -
I'm very new to Solaris and I need to install RealTek 8169 driver. How do I unzip and install? Any help would be greatly appreciated.
Where did you get the driver? This page perhaps?
http://homepage2.nifty.com/mrym3/taiyodo/eng/
If so, here are the instructions for compiling and installing it:
1. Introduction
This is the Realtek RTL8169/8110 giga bit ethernt NIC driver for Solaris.
It is distributed under the BSD license.
2. Specification of the driver
File name of the driver: /kernel/drv/gani
Special file name: /dev/ganiN (Where N is a unit number, typcally 0 for first
card)
For example
% ifconfig gani0
RTL8169/8110 chipset dosn't support 1Gbpis half duplex mode.
Currently gani driver isn't stable on sparc platforms.
Tested OS version
Solaris10 x86 3/05 (Athlon 2800+ w/ VIA K8T800 chipset)
Solaris10 x86 3/05 (Athlon 3000+ w/ nVIDIA nForce4 CH8-04 Ultra chipset)
Tested cards
RTL8169s -- Planex Communications GN-1200TC
RTL8169s -- Corega CG-LAPCIGT
3. Preparing for installation
(1) Install your PCI card and boot Solaris.
(2) Copy source and binary files.
# gunzip -cd gani-x.x.x.tar.gz | tar xf -
(3) Add hostname for the NIC card into /etc/hosts file
(4) Make links to correct binary directory and Makefile according to your
configuration. i386 and gcc are default.
% cd /.../gani-x.x.x
% rm obj Makefile
% ln -s Makefile.${KARCH}_${COMPILER} Makefile
% ln -s ${KARCH} obj
where ${KARCH} is the result of `isainfo -n`, and ${COMPILER} is
"gcc" or "suncc" which you want to use to make the driver.
(5) Making binaries (only for sparc platform)
Gani driver is ready for 64bit and 32bit solaris8 10/00 sparc or
later. (But currently it is unstable on sparc platforms.)
This distribution does not include sparc binaries. To make the binaries,
you need Sun C compiler or gcc version 3, and do the following operations.
% /usr/ccs/bin/make
4. Testing
Testing before installation is strongly recommended.
# cd /.../gani-x.x.x
# /usr/ccs/bin/make install
# ./adddrv.sh
# /usr/ccs/bin/make uninstall (for solaris7, don't remove the file )
# modload obj/gani
# devfsadm -i gani (for solaris7, use drvconfig and reboot with -r )
# ifconfig ganiN plumb ( where N is an instance number, typcally 0 for first card)
# ifconfig -a ( you will see an entry for ganiN)
# ifconfig ganiN YOUR-HOST-NAME
# ifconfig ganiN ( ensure IP address is correct)
# ifconfig ganiN up ( and then you can test with ping, telnet, ftp ...)
5. Installation
After you ensure that the gani driver is fully functional, install it.
(1) install the gani driver into the kernel directory
# cd /.../gani-x.x.x
# /usr/ccs/bin/make install
If you do not test the gani driver yet, execute the following commands:
# ./adddrv.sh
# devfsadm -i gani (for solaris7, use drvconfig and reboot with -r)
(2) Configure the network interface. Create and/or modify the following file:
/etc/hostname.ganiN
(3) Reboot the system.
# init 6
Maybe you are looking for
-
Upgrade from OSX 10.4.11 to Snow Leopard/OS X Lion
I know my operating system is really behind. Now that OSX lion is out I am very behind in terms of my operating system. Do I need to buy snow leopard first and then lion. If so can I just buy the leopard upgrade or do I need to buy the box set also
-
IMovie editing slow while MBP connected to Plasma Screen
Am newbie to MBP and iMovie I am using the MBP connected to the 42 inch Plasma screen. I am getting frequent and prolonged spinning ball while editing in iMovie. The raw DV footage is stored on Glyph EHD connected to MBP by FireWire 800 cable. Is the
-
Flash will not install on Mac OS X.5.7.
Attachment will not open without Flash. Download is successful. menu indicated installation was successful but app does not show up in APPs, therefore attachment will not open. Apple help said Adobe would have to solve. This is a MacBook, OS 10.5.7
-
Hi all, can anyone tell me as to how I can pass value between two views in IC Web Client. Regards, Vijay
-
How to download free applications from apple store without billing info
I want to install free applications from apple store but I cant find the option none in the billing information ( credit card space) as mentioned in answers for the same questions in the community