WINPE Optional Recovery Components missing from ADK 8.1

as indicated here:
http://technet.microsoft.com/en-us/library/hh824926.aspx
WINPE-Rejuv and WINPE-SRT components are missing after install of ADK 8.1 while WINPE-WinReCfg is available?
Has something changed to provide these additional optional components to WinPE_OCs?
I enabled the following for ADK 8.1 setup:
- Deployment Tools
- Windows Preinstallation Environment
- Windows Performance Toolkit
- Windows Assessment Toolkit

I'm pretty sure those are DART cabs which would require a MS Subscription to DART premium recovery tools.  Either way I don't see them in my 8.1 ADK if that helps.

Similar Messages

  • Recovery Wizard missing from MDT welcome menu

    I can't seem to get the Recovery Wizard to show on the MDT 2013 welcome screen when doing a PXE boot.
    One thing I did want to clarify, if the client pc doesn't have a recovery partition is this why I don't get to run the wizard?
    Im wanting to see the recovery wizard option so I can go in and run the DART Locksmith tools
    MDT 2013
    Windows 7
    Dart 8
    I thing I've tried everything and getting nowhere!

    MDT uses a round about way to get the Recovery wizard to work in MDT Litetouch console.
    THe recovery tools are not included by default in the WAIK, so MDT extracts these components from a working boot.wim from one of your OS install sources.
    Can you do a dump of all the WinPE WIM files in question:
    DISM.exe /Get-WimInfo /WimFile:C:\Path\To\Wim\winpe.wim /Index:1
    Dump the boot.wim in your <deploymentShare>\Operating Systems\<OS>\sources\boot.wim
    and the wimpe.wim under the c:\program files(x86)\windows kits\...\WinPE.wim
    Both files must exist on your machine *and* they must be the same OS Version.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • Recovery disc missing from new iMac (late 2012)

    My iMac doesn't boot from the recovery partition. If I boot with the option key (alt) it only shows one bootable volume. If I boot with cmd-R it takes longer but still boots from the main volume.
    I've run Disk Utility in debug mode and it shows that there is a recovery partition. I've mounted it, and looks as if it has the right stuff on it:
    com.apple.boot.P
    com.apple.recovery.boot
    System
    So, what is going on? It looks as if the boot process isn't recognising the recovery disc as a valid boot volume.
    Any idea why?
    The machine is fresh out of the box this week and I've not yet migrated my old system, so it's about as standard as you can get.

    Thank you Mende, for that useful suggestion!
    Unfortunately, looking it up, I find that recovery over the Internet takes several hours.
    Also, I've updated my machine from the 10.8.2 it shipped with to 10.8.3 and I still don't ahve a recovery drive.
    As I said, I can see that there is a recovery partition and it appears to have a recovery system on it, is there some way that I can make it visible to the boot loader? It looks as if that is all that's missing...
    Has Apple said anything about why it has left the recovery drive off the latest iMacs? It seems to me to be an even odder thing to leave out than the Infra Red connection (which is very annoying because I've a very useful and expensive Apple Remote that's quite new and now useless - it doesn't work for my Macbook Pro either). I can understand them leaving the DVD drive out and it wasn't too much hassle to connect an external DVD which works quite well.

  • Recovery Manager missing from All Programs

    Hi,
    A few months back I installed windows 8 wihtout knowing it was not possible to remove it. I somehow managed to restore my windows 7. But in the process the HP Recovery Manager got removed from the Start Menu. I don't know how it got removed.
    My recovery Partition is still there. How do i create the recovery discs without theRecovery Manager or how do I restore the Recoery Manager.
    Please suggest
    Thanks
    SId

    Hi
    Please find the web link given below might help you.
    Recover Windows 7 Operating System Using HP Recovery
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Output Option menu is missing from the print dialogue box

    I have just upgraded to the latest G5 PPC and installed OS 10.4.6 and in all applications in the Print dialogue box I cannot find the Output Options menu so I can output a postscript file, is there another patch that can be installed to add this option back into the printer settings. I didn't have this issue with 10.3.9 only in 10.4.X
    G5   Mac OS X (10.4.6)  

    I have looked the PDF menu but I am not happy that it states "Save PDF as Postscript", this option was available before and we had issues with some of the files it created. I cannot guarantee that it is using my postscript printer descrition which I need as we need full High Res files with NO downsampling at any stage and I'm not confident this is the solution, there has the be a better way to create a postscript file.

  • I am not able to use internet in i-phone 4s turbo after updating it ios6 to ios8 n some option is also missing from my phone like enable 3g and APN

    plz help me out of it am very much frustated of it

    You have hacked your phone with Turbo SIM. You cannot get any help here for hacked phones. Contact the place/person who sold you the SIM. Surely, they have support services, don't they?

  • HFM icons,explore option and Financial Reporting option missing from Workspace 11.1.2.1

    Hi,
    We finished installing and configuring hyperion 11.1.2.1. We noticed unusual behavior in Workspace, All the HFM icons are missing from the menu , it is showing some hfm path. Explore option and financial reporting options are also missing from the Preferences and workspace. Can you please advice what could be causing this issue ?
    Regards,
    Andy

    Hi Thanos,
    Thanks for the reply. Actually i tried to login to HFM client but it says application not registered. So when i tried to register it from workspace, it gives error.  I have already configured all the components but i didn't reconfigure Foundation web server after every component. Is it okay if i do it now when all the components  are already configured ? Or do you suggest reconfiguring all the components again followed by Foundation web server ?
    Also do you think it will help me get explore option in the workspace ?
    Kindly advice. Appreciate your help.
    Regards,
    Andy

  • "events" is missing from iPhoto source list / left-hand menu

    The "events" menu option is suddenly missing from the left-hand side menu of my iPhoto library.  See screenshot:
    Photos, Faces, Places, but no Events!  It used to be there and now it's not, not sure what happened.  When I open a different iPhoto library it is there, so it seems like a problem with my iPhoto library?  I tried rebuilding the iPhoto database and that didn't fix it.  The event data still seems to be there, when I browse the photos view pictures are still grouped by events.  Anyone have any suggestions?  I'm using iPhoto v 9.6 on Yosemite.  Thanks in advance for your help!

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks and Yosemite,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.

  • Print Button missing from list

    When I create a new project the Print option is frequently missing from the Toolbar Buttons field in Webhelp Settings. Sometimes I close the dialog, reopen it, and "Print" is miraculously there, so I can select it. Other times I can't make it display. Is there a switch somewhere, where I can indicate that I ALWAYS want the Print button? If not, how do I make it display when it doesn't?  Thanks!

    Hi there
    Whether or not you see a Print button is dependent on whether one was included in the skin you are using. Your example depicts that your skin selection is "Default". In order to see an option to include a Print button, you need to choose a skin that has one defined.
    Cheers... Rick

  • Recovery option missing from ThinkVantage boot menu

    On my x220 I installed an mSATA hard drive in addition to the built-in disk. I re-installed Windows 7 and all of the Lenovo utilities onto the mSATA drive, then deleted the 100mb system and primary Windows partition from the spinning disk. I did not touch the RnR partition.
    Now when I press the blue ThinkVantage button during start-up, recovery is not one of my choices. I cannot get into the recovery partition. What steps are necessary to re-enable this feature?
    Thank you. Screenshots below show the in-tact recovery partition, and my menu of choices when I press the ThinkVantage button
    Link to picture
    Link to picture
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

    Did you install the mSATA using recovery discs from Lenovo or make a clean install?
    As the F11 is the only option which is missing, and the only option which is not a direct BIOS command and must be in the Master Boot Record, my guess is that your BIOS / MBR don't know that it should show the message or even know that the recovery partition exists.
    How you sort that all out is unknown to me, not one of my skills. Maybe install the mSATA from recovery discs which would then also locate the recovery partition also on the mSATA or somehow edit the MBR which I definitely don't know how to do???
    edit; grammar
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Shared Components option missing from Applications tab's Create New

    The Shared Components option is missing from the Applications tab's Create New... list. As anyone else experienced this? The installation completed without errors.

    Never mind, I found the Shared Components option.

  • How come the switch user option is missing from my lock screen?

    I upgrade to Lion my iMac Core 2 Duo and now when I lock the screen the switch user option is missing from the lock screen, you just have to cancel o renter as the original user, so that if another member of my family wants to switch and use the mac he or she cannot do it.
    This is what I am talking about (image taken from a lion review): http://dl.dropbox.com/u/134544/forum/Schermata%2007-2455766%20alle%2011.05.12.pn g
    The switch user option is totaly absent, I just have the cancel.
    It that a bug or what?
    Please note this happens only when I lock the screen from the screensaver, i.e. requesting the password to restart from the screensaver, if I get to the login windows all users appears correctly and people can switch back and forth.
    Thank you.
    –&#8232;cordialmente,
    tiziano solignani, da  Mac
    http://ts.solignani.it (splash)
    http://goo.gl/p6Sb0 (libri)

    I just talked to apple support.  They said Lion doesn't support this feature.  They gave me a work-around, which was to disable requiring a password in the screen saver.  Then enable user switching so it appears in the top right of the banner.  Note that since the screen saver no longer locks the screen, in order to actually lock the screen the user must click on the upper right user list and select something like "Login user...".
    This issue has left me disappointed with apple for a few reasons.  Hopefully someone at apple will take note:
    1. Apple removed a useful feature.
    2. Apple did not provide a response to this thread which would have been the best forum to inform users of this change.  It would have saved me and apple one long phone call.

  • PS CS4 64-bit (in Web Premium CS4) on Win 7 PC.  I did a duplicate file check on my hdd and deleted dup files. Now I get "Some of the application components are missing from the Application directory, Please reinstall.."

    PS CS4 64-bit (in Web Premium CS4) on Win 7 PC.  I did a duplicate file check on my hdd and deleted dup files. Now when I try to run PS 64-bit I get "Some of the application components are missing from the Application directory, Please reinstall the application." When I do this, it seems to install correctly until the very end, then it says "Installation Complete With Errors", and when I try to run I get the same 'component missing message'. What can I do? PS 32 bit runs fine. Some of the other applications ib Web Premium say the shortcut has been changed or removed. I appreciate your help...Thank you

    Best advice I can think of is to uninstall and run the Clean Script from here.
    Adobe - Adobe CS4 Clean Script

  • I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

    i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

    Guitar21,
    your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

  • No option to save files, content/file type missing from Applications list

    I want to be able to click a link to a file and have the option to Open the file with a specified application.
    When clicking on the file I want to Open with a specified application, I only get a Save or Cancel option.
    When I look in Preferences > Applications, the file type is missing from the list.
    This was working. It is not working anymore. It is not a problem with the website. I need to know where in the FF settings I can change this.
    FF 30.0
    Kubuntu 13.10
    Thanks

    ''Tahl [[#answer-693773|said]]''
    <blockquote>
    OP, did you ever get a solution to this problem? It's driving me nuts having to specify a download destination then go into a program to open the file I just downloaded!! Have tried deleting file types .rdf and no success either!
    </blockquote>
    I'm not sure of the solution on Windows. But this worked for me on Linux.
    I needed to edit mimeTypes.rdf
    See the links below for details. The first one was someone having a problem with Transmission. I was having a problem with ktorrent, so I just adapted that. If you're having a problem with a different file type, then you'll need to adapt it differently. But the general idea is the same.
    http://askubuntu.com/questions/384375/how-can-i-get-firefox-to-open-torrent-files-with-transmission
    http://forums.mozillazine.org/viewtopic.php?f=9&t=1706945
    Also, I suspect that FlashGot or some similar download manger plugin was responsible for screwing this up. I haven't confirmed it yet, but I've seen some things that make me suspect it.

Maybe you are looking for