WinProducer2 start error, won't run with nVidia Capture drivers

I'm not having a good experience with the bundled WinProducer2 that came with my MX440VT8x-128.
If I have either of the versions of the nVidia capture-drivers that came on the card's CD (that's v. 1.16 or 1.18)  installed, or the 1.22 version from nVidia's website (as of 2-20-03),  and then try to start WinProducer, I get the same start-error every time:
"WinProducer.exe has generated errors and will be closed by Windows....need to restart program...an error log is being generated."
If I look at the Dr. Watson log, it says WinProducer 2 generated  "Exception Violation c00005."
If I uninstall the nVidia capture-drivers, WinProducer2 opens right up just fine, but, of course, with no capture capability.
I downloaded and tried (after uninstalling v.2) WinProducer3 from InterVideo's website yesterday (2/20/03), with the exact same results!   ???
Anybody else having this problem?
This is under Win2k, w/SP2,  then added SP3, with no improvement.
Stenn

After I made the original post, I tried a lot more things that didn't help:
I booted in safe mode and tried it but PSP gave an error message that it wouldn't run with the screen resolution that low (800x600); so it did try to run. So I booted normally and set the screen rez to 800x600 manually, then tried to run PSP and got the same error message.
I did a clean boot with all start-up programs and all services disabled; PSP still wouldn't run.
I disabled my anti-virus and PSP still wouldn't run.
Disabled my video card in the device manager and booted with my on-board video; PSP still wouldn't run.
There's never an error message as long as the screen rez is high enough; when I try to run it, it looks like it's starting to run but nothing ever happens.

Similar Messages

  • The latest Firefox won't run with Mac OS 10.4.11. How can I get the previous version of Firefox?

    I have Firefox 12.0. It won't run with Mac OS 10.4.11. I do not want to have to buy a new computer right now. I would like to go back to a previous version of Firefox that will run with my operating system. How can I download an older version of Firefox?

    You can find the latest Firefox 3.6.x release in all languages and for all Operating Systems here:
    *ftp://ftp.mozilla.org/pub/firefox/releases/latest-3.6/

  • MOVED: Won't run with 2 CPUs

    This topic has been moved to Server/workstation.
    Won't run with 2 CPUs

    Okay. Power supply info. Had to break my system down because the side that had the info on it was covered by the top of the tower.
    Enhance Electronics
    Model: ATX-1140F with Outlet
    400 Watt Power Supply
    +3.3v(28A), +5V(38A), +12V(18A), -12V(.8A), -5V(.5A), +5VSB(2A)
    The 4 pin connector is plugged in. =) I did not overlook that.
    As for trying it with fewer memory sticks, no I have not tried that but keep in mind that earlier today the previous mobo was in this machine and running with both CPUs and all 3 memory sticks (512, 512, 1024). All in the same memory slots as the original mobo. I pulled each one and inserted it in the new mobo before taking out the next one to be sure I put them back in the same slot.
    I checked and double checked all the bios settings and they match. The only thing that has changed since this morning is the replacement mobo and that is the exact same model as the one I replaced. System works fine with 1 CPU but not with 2. What might cause that on this motherboard but not the original one?

  • I downloaded the new firefox and now I get an error stating it won't run with my version of Mac OS? What is the fix?

    I was prompted to upgrade to Firefox 4 - I have a 3.6 version. When I move it to my application folder and tried to run it, I get the error that it cannot run with my version of Mac OS. I'm not sure how to update my OS version or go back to an older version of Firefox.

    Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • Error - Application will run with a wrong client window ID!

    Anyone here knows how to resolve this error:
    An error occurred while starting the iView.
    Application /webdynpro/dispatcher/ ... ... ... will run with a wrong client window ID!
    Do not continue; please report this problem to your administrator.
    The user encountered this pop-up message after she upgraded her browser to IE8. However, she's the only one having this error. Others who have switched to IE8 didn't encounter this error.
    SAP Note 1171930 -- is not applicable to us.
    Your prompt response is appreciated.

    I guess you need not use the library. The note says its a problem with library.
    It applies to you if you use custom framework page other than standard framework page.
    SAP can give you better response on why only one user gets it. In my scenario, we are able to consistently reproduce this.
    And I guess most of the bugs will have similar statements attached 'it occurs only for one user'. 

  • Please help, CS3 won't run with 10.5.2!  Please!

    Installed 10.5.2 on my g5 dual 2.5 w 4.5 gigs ram (NOT) intel. Now my AE projects won't run. One started to and then quit. This is major for me. Involves dozens of projects. Please help.

    Yes, my powerbook is also trouble-free.
    But it's just too slow to run AE on.
    And yes, yes, I did repair permissions. I did everything including a "safe" starup, repair permissions many many times, etc. etc. etc.
    I'm beginning to think the problem with AE was with non-ae plugins. But then why did automator and software update cease to work?????

  • PB doesn't always start up/won't run on charged battery

    I have a 15" aluminum PowerBook that I've slowly been bringing back to life after it had a full mug of coffee dumped into it. I cleaned everything out and it's working again, for the most part. However, there are a couple of unresolved problems. The biggest is the computer doesn't always start up. I've also noticed that it won't run on the battery alone, even though the battery is fully charged. When unplugging the computer, the screen goes dark but the computer is still making noise -- it's running to some extent. Any pointers on how to get things running again properly would be greatly appreciated.

    If you're able to charge the battery while it's in the computer, and pushing the button on the back of the battery shows all the LEDs lighting up, that suggests that you have a logic board problem. There are only 4 components to the charging circuit: power adapter, DC-in card, battery, and logic board. If what you described is that you can hook the power adapter up and charge the battery completely in the computer, the only component left is the logic board.
    While there aren't any tests I've found to test the charging circuit, have you run the Apple hardware test or either of the TechTool programs to test the system? Insert your original OS X disk that says 'AHT Version x.x' in small print on the label. Reboot holding the option key down, choose the Apple hardware test, and when prompted choose the extended test. Does that give you any errors?

  • Won't run with 2 CPUs

    I just replaced my 6501 motherboard with one that MSI sent me. When I install both processors the computer most times hangs at startup screen. Lights 2 and 3 are red which indicates it stops at the Bios sign-on.
    It hangs where it says AMD MP 2800 Processor but before memory test and it does not display the , (2 cpu's) to the far right of the processor (80% of the time this happens on boot-up). Occasionally when I reboot it will detect both CPUs and will initialize the bios and then start loading windows at which point it immediately reboots.
     If I remove the second CPU and reboot the machine boots fine and I can load up windows.
    I have swapped both CPUs and put both of them in the Primary CPU slot and they both boot up and run fine no issues. Only when I try to have both in do I have problems. The reason I replaced the MB was because of some dried out capacitors. I got the 1.91 bios update already. Not sure what might be causing this but I want both CPUs working like before. Any help would be appreciated.
    This is the first time this board has been used. I pulled it out of the box this morning. It is a refurbished board from MSI. The other board with the dried out capacitors ran both CPUs fine without issue but I had data transfer issues so had to replace it. The newest bios available for this motherboard appears to be award bios v1.91 which is the one I have.
    If any further info is needed let me know what else you need. (I am on the computer having troubles right now but with only 1 CPU running - works fine albeit a bit slower)

    Okay. Power supply info. Had to break my system down because the side that had the info on it was covered by the top of the tower.
    Enhance Electronics
    Model: ATX-1140F with Outlet
    400 Watt Power Supply
    +3.3v(28A), +5V(38A), +12V(18A), -12V(.8A), -5V(.5A), +5VSB(2A)
    The 4 pin connector is plugged in. =) I did not overlook that.
    As for trying it with fewer memory sticks, no I have not tried that but keep in mind that earlier today the previous mobo was in this machine and running with both CPUs and all 3 memory sticks (512, 512, 1024). All in the same memory slots as the original mobo. I pulled each one and inserted it in the new mobo before taking out the next one to be sure I put them back in the same slot.
    I checked and double checked all the bios settings and they match. The only thing that has changed since this morning is the replacement mobo and that is the exact same model as the one I replaced. System works fine with 1 CPU but not with 2. What might cause that on this motherboard but not the original one?

  • Slim won't work with nvidia

    Hi!
    I've read somewhere how to use slim with nvidia but forgot where.
    Is there anybody that use slim with nvidia (binary driver, not nv)?

    mpie wrote:how are you starting slim?
    from rc.conf
    mpie wrote:are you restarting slim after installing changing to nvidia?
    /etc/rc.d/slim stop
    nano /etc/X11/xorg.conf
    /etc/rc.d/slim start
    Reboot does not helps too.

  • How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

    The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
    Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
    Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
    HELP!

    Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
    Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
    I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

  • Vids won't run with Safari, but work with FireFox just fine

    I can't get vids to run with Safari. Where the vid is supposed to be, on YouTube etc, it's just blank. They run fine with FireFox, though. I don't mind using FireFox, its a great browser. I just don't like the idea of something being wrong with my MacBook.

    Make sure your plug-ins are enabled in Safari (preferences) and that you're not using Rosetta mode (Get Info window).
    http://www.adobe.com/shockwave/download/alternates/
    Uninstall Flash and reinstall the software.

  • BC4J Tester won't run with SunJCE provider enabled in JDev 903

    I have a working BC4J project that I can access via the Tester and via code in JDev 903. The Module is deployed in 'Local' mode.
    I go into <jdev_home>\jdk\jre\lib\security\java.security and add the following line:
    security.provider.3=com.sun.crypto.provider.SunJCE
    I can no longer run the BC4J Tester - I get "java.lang.NullPointerException" - that's it - in the log window when I try to run the tester. I can still access the BC4J Module via code, just as before enabling the SunJCE provider, its just the Tester that won't run. My code that uses the SunJCE provider runs fine.
    I then comment out the new line in java.security, and the Tester runs fine again. (But, of course, my code that needs the SunJCE provider does not...)
    Note that I added this provider as the lowest order provider - the following is how java.security is setup when JDev is installed:
    security.provider.1=sun.security.provider.Sun
    security.provider.2=com.sun.rsajca.Provider
    Any thoughts or ideas?
    Thanks,
    Jim Stoll
    (I need this provider for something else I'm doing which uses both the SunJCE provider and BC4J, independent of each other)

    Hi,
    Can you create a JClient project to test your application module? I have not found why it failed in Tester when using SunJCE privider, but found that if I create a simple JClient using the same application module, it work.
    Thanks,
    Yvonne

  • Trouble with VDPAU with Nvidia Properitary Drivers

    I've recently got arch on my machine, but I've been unable to get VDPAU to work as a hardware decoder for my media player.  I have installed and am running the latest Nvidia proprietary drivers along with the packages nvidia-utils, libvdpau, and lib32-libvdpau.  Also, vdpauinfo confirms that my GPU can support VDPAU.  I've read the wiki's page on VDPAU, but I'm entirely new to Arch and still somewhat new to linux, so I'm afraid some things may have gone over my head.
    Last edited by yeti3871 (2015-04-16 00:46:25)

    I'm using mpv with the option "--hwdec=vdpau" the error oput is:
    Trying to use hardware decoding
    [ffmpeg/video] h264: decode_slice_header error
    [ffmpeg/video] h264: no frame!
    Error while decoding frame!
    Error using hardware decoding, falling back to software decoding.
    Last edited by yeti3871 (2015-04-16 21:03:15)

  • HP Photosmart C2780 All-in-one won't work with Image Capture

    I want to use Image Capture as the scanning software but it won't connect to my scanner (HP Photosmart C2780 All-in-one). When I go to browse devices it shows the scanner but when i click on "Use Twain UI", nothing happens, and it is supposed to ask me if I want to connect. I believe that I have followed all of the instructions correctly but nothing is happening. Does the HP Photosmart C2780 even work with Image Capture? and if it does what am I doing wrong?

    Install the HP Drivers from HP.
    I installed V9.7.1 from the HP website:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55650-2 &lc=en&cc=us&lang=en&os=219&product=3204785&dlc=en
    This provides 'Hp Device Manager' which will scan images or do OCR on text pages....

  • After effects instantly crashes while using opengl with nvidias new drivers 178.24

    Since I installed nvidias new drivers 178.24, after effects instantly crashes while using opengl. Anyone else experienced this?
    I have Geforce 8600 GT.
    As a minor note, I had major problems with the new quicktime 7.5.5 update, both After effects and Premiere got problems with interpreting footage and frames here and there got the "missing frame" look. I also got more problems so I uninstalled it instantly. Is there a major problem with the update or a major problem with me?
    Thanks
    / Olle

    I use Vista (in retroperspective this was probably a mistake, but the company wanted to test the capabilities with Vista when we bought the computer a year ago). And specs are:
    *Graphics: Asus Extreme GeForce 8600GT SILENT 512MB DDR3 TV-out HDTV DUAL DVI RETAIL PCI Express
    *HD: Samsung HD501LJ 500GB 7200rpm 16MB SATA2
    *Audio: Creative Sound Blaster X-Fi Xtreme Audio Retail
    *Mem: Corsair QUAD2X4096-6400C5DHX QuadDHX 4x1024MB (tot. 4096MB) Kit DDR2 XMS2-6400 800MHz
    *Motherboard: Asus P5K iP35 4DDR2-DIMM 3PCI 3PCIe SATA Raid Audio GB-LAN Firewire Socket775 ATX
    *Processor: Intel Core 2 EXTREME QUAD QX6850 3.0GHz 8MB FSB1333 Boxed (with cpu-cooler!) Socket 775
    *Power: Sirtec/Chieftec CFT-750-14C 750W 140mm fan ATX2.0 20/24-pin 4/8-pin 12V Modular
    Sorry not to give more info on the Quicktime problem, I don't remember exactly what more problems there where as we have had extremely much to do these last couple of weeks and I just freaked out and uninstalled it as soon as the problems emerged. I do remember the frame issue however, it was very clear, i imported an image sequence in premiere and everything worked fine, then i updated and frames were suddenly dropped, then i uninstalled and installed 7.5 again and it worked just fine. I also tried to flush the cache, restart and generally search for the source of the problem for a couple of hours.
    / Olle

Maybe you are looking for