WINRAR error when trying to extract NW2004s Sp11 (abap)
Hello All,
I received the following error when trying to extract NW2004s Sp11
<b>! E:SAPNW2004sABAPTrialSP11.part1.rar: CRC failed in SAPNW2004sABAPTrialSP11imageloadload_datasave.gz. The file is corrupt
! E:SAPNW2004sABAPTrialSP11.part2.rar: CRC failed in SAPNW2004sABAPTrialSP11imagesetup.jar. The file is corrupt
! E:SAPNW2004sABAPTrialSP11.part2.rar: CRC failed in SAPNW2004sABAPTrialSP11maxdbtoolsSQLSTD76.exe. The file is corrupt</b>
I thought this was a download error and downloaded it again but the same error occured at the very same place.
I get this error at exactly 99% extraction of
Part 1(rar part no.71 - load_datasave.gz), and in the begining of Part 2.
It takes me about 2 days to download the parts and as you can imagine it can be really frustrating...
I tried downloading using FlashGet(a downloader) as well as the normal save as... in IE, both ways I get the same error.
Can someone please check to see if your RAR files(in the server) are corrupt?
If not, can someone advice where else I can get this software?
Thanks,
Faheem
Hello Faheem,
You could compare the file sizes of your files with the sizes given on the
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399">download [original link is broken] [original link is broken]:
<b>
ABAP Edition File 1 (file size exactly: 1.536.000.000 bytes)
ABAP Edition File 2 (file size exactly: 1.161.657.000 bytes)
</b>
Don't forget to put both parts in the same folder and extract just the first part. The second will be extracted automatically.
Hope this helps.
Kind regards,
Klaus
Similar Messages
-
Error when trying to extract WBS Hierarchy
Any help appreciated.
Using BI7, when trying to extract the WBS Hierarchy from an R3 source system using DataSource 0WBS_ELEMT_WBSH_HIER during the extraction process the load fails with error "The level of the node ID 00041234 does not suit the lev of higher lev node"
The long text talks about Parent and Child nodes. I believe the numbers being stated, 00041234 etc refer to the Technical IDs shown within the Hierarchy Display within BI. I've checked table PRPS in Project Systems and I assumed the numbers represented WBS Elements - but they do not match when checking the descriptions. (BI to R3)
Checked on OSS and note 339453 may apply but Im not sure what to check / how to replicate. Based on the errors being reported in BI how can I identify the error in the R3 source system?
Many Thanks
LeeClosed as no responses.
-
Pacifist error when trying to extract quicktime from install disk
I get this error when i select the OSX install disk.
I deleted quicktime by mistake,so i needed to extract it again.
any info on what is causing this error?Hello,
I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
Regards
Andreas -
Error when trying to extract data from Solman to BI 7
Hi,
We are trying to extract data from Solman 7 to BI 7. The following extractors have been activated on Solman since we want to be able to report CCMS ALERTS and System availability on Bi Portal.
Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
transaction: RSA5 (Installation of DataSource)
0SM_SMG_ROOT Oberster Knoten Solution Manage
0SM_SMG Solution Manager
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400 DB400 Data
0SM_DSWPBI_DBADA Adabas Data
0SM_DSWPBI_DBDB2 DB2 Data
0SM_DSWPBI_DBINF Informix Data
0SM_DSWPBI_DBMSS SQL Server Data
0SM_DSWPBI_DBORA Oracle Data
0SM_DSWPBI_MODUL Module Data
0SM_DSWPBI_PERF Performance Data
0SM_DSWPBI_SERVER Server Data
0SM_DSWPBI_SYSDATA System Details Data
0SM_DSWPBI_SYSTEM System Data
Our current situation is that we have scheduled the jobs through Solution_manager > solution Reporting > BI Data collection. Yet no data has been collected and the jobs are getting cancelled.
Has anyone come accross this same situation before? Plus I have just found out that on SOLMAN_WORKCENTER under System Monitoring there is a reporting step named IT PERFORMANCE reporting that needs to be configured.
Please advice since this will be critical for our busines.Hello,
I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
Regards
Andreas -
Errors when trying to extract via UD Connect (BI 7.0)
Hi all,
in a BI 7.0 system I can't select any UD Connect source object on the "Extraction" tab page of the DataSource maitenance screen. If I type the table name (which is "DICTIONARY") into it and then hit the "Proposal" tab page, I get the following error:
Errors occurred during extraction of UD Connect object field-list: UDCADAPTERROR::RSSDK|200|Table: DICTIONARY not found
We had a restart of the system the weekend. Before that, I could easily select from the list of available UD Connect source objects (tables and views from the connected MS SQL Server) and the system showed correctly all fields of that object in the "Proposal" tab page.
I think there is a problem with the JDBC Connector in the J2EE server. How can I check, if the connection between the JDBC Connector and the connected database is working? Unfortunately I have no access to the Visual Administrator for the J2EE engine because I am not from the basis team.
Thanks to any answers in advance!
Best regards,
PhilippHi again,
I can precise the problems I have:
I'd like to extract data from a table in a MS SQL Server 2000 database named DICTIONARY. This table has the following columns:
DICTIONARYID (numeric(16,2), Not Null)
LANGUAGECODE (char(2), Not Null)
TYPE (varchar(24), Not Null)
VALUE (numeric(38,0), Not Null)
VALUENAME (varchar(48), Not Null)
DESCRIPTION (varchar(128), Not Null)
attr31 (numeric(16,2), Not Null)
attr32 (numeric(16,2), Not Null)
attr33 (numeric(16,2), Not Null)
attr34 (numeric(16,2), Not Null)
When starting the data extraction in the InfoPackage I get an error in the monitor. Deeper down in the J2EE server logs I get the following exception which is the reason for the error:
Date : 11/21/2006
Time : 8:53:48:452
Message : Exception: Value '30.00' cannot be converted to NUM type at field ATTR31
Severity : Error
Category :
Location : com.sap.ip.bi.sdk.datasource.beans.BI_SDK_Bean
Application : sap.com/com.sap.ip.bi.sdk.datasource.sync
Thread : SAPEngine_Application_Thread[impl:3]_10
Datasource : 238150750:/usr/sap/DOS/DVEBMGS23/j2ee/cluster/server0/BI_SDK_Trace.log
Message ID : 0014C2658003005E000000C0000041F5000422BD226B24FF
Source Name : com.sap.ip.bi.sdk.datasource.beans.BI_SDK_Bean
Argument Objs :
Arguments :
Dsr Component : DOS
Dsr Transaction : 456273935D18288AE1000000C72A309C
Dsr User : HINNAPHI
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives :
Resource Bundlename :
Session : 0
Source : com.sap.ip.bi.sdk.datasource.beans.BI_SDK_Bean
ThreadObject : SAPEngine_Application_Thread[impl:3]_10
Transaction :
User : J2EE_GUEST
Actually there is a record that has 30.00 as value in the attr31 field. I think there are problems with the numeric(16,2) fields. I tried to use different data types in the corresponding fields of the UD Connect data source (e. g. DEC, FLTP) with different length and decimal places settings. But the exception is always the same (see above).
Another issue: I can only specify "Internal" for the format in the data source maintenance. If I use "External" or "Check" the system says: "External format not supported as data type is not 'CURR'".
Do you have any idea why this conversion exception occurs and what I could do about that?
Thanks to any answers in advance!
Regards,
Philipp -
Serveral Errors when trying to install NW2004s Preview Java
Hello Experts,
i'm trying to install the NW2004s Java Preview.
Right my tenth try is running. Everytime the installtion stop with an error in Step "Install Java Engine". Here are the occured error from the installation log:
<i>ERROR 2007-05-23 12:10:04
FKD-00037 Query did not return a result.
ERROR 2007-05-23 12:10:04
FKD-00038 Query did not return a result.Select attribute oldMasterPassword, statement: WHERE sid = 'J2E' AND componentID = '|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|NW_GetUserParameter|ind|ind|ind|ind|1|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0' AND paramname = 'sidAdmPassword'
ERROR 2007-05-23 12:10:04
FKD-00037 Query did not return a result.
ERROR 2007-05-23 12:10:04
FKD-00038 Query did not return a result.Select attribute oldMasterPassword, statement: WHERE sid = 'J2E' AND componentID = '|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|NW_GetUserParameter|ind|ind|ind|ind|1|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0' AND paramname = 'sapServiceSIDPassword'
ERROR 2007-05-23 12:11:50
FKD-00037 Query did not return a result.
ERROR 2007-05-23 12:11:50
FKD-00038 Query did not return a result.Select attribute oldMasterPassword, statement: WHERE dbsid = 'J2E' AND componentID = '|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_DBUser_Dialogs|ind|ind|ind|ind|2|0' AND contextname = 'dbaPassword'
ERROR 2007-05-23 12:11:50
FKD-00037 Query did not return a result.
ERROR 2007-05-23 12:11:50
FKD-00038 Query did not return a result.Select attribute oldMasterPassword, statement: WHERE dbsid = 'J2E' AND componentID = '|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_DBUser_Dialogs|ind|ind|ind|ind|2|0' AND contextname = 'dbmPassword'
ERROR 2007-05-23 12:12:18
FKD-00037 Query did not return a result.
ERROR 2007-05-23 12:12:18
FKD-00038 Query did not return a result.Select attribute oldMasterPassword, statement: WHERE dbsid = 'J2E' AND componentID = '|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|4|0' AND contextname = 'dbSchemaPassword'
ERROR 2007-05-23 12:14:57
FKD-00037 Query did not return a result.
ERROR 2007-05-23 12:14:57
FKD-00038 Query did not return a result.Select attribute oldMasterPassword, statement: WHERE sid = 'J2E' AND componentID = '|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Standalone|ind|ind|ind|ind|0|0' AND paramname = 'sdmPassword'
ERROR 2007-05-23 12:14:57
FKD-00037 Query did not return a result.
ERROR 2007-05-23 12:14:57
FKD-00038 Query did not return a result.Select attribute oldMasterPassword, statement: WHERE sid = 'J2E' AND componentID = '|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Standalone|ind|ind|ind|ind|0|0' AND paramname = 'adminPassword'
ERROR 2007-05-23 12:16:32
FKD-00037 Query did not return a result.
ERROR 2007-05-23 12:16:32
FKD-00038 Query did not return a result.Select attribute oldMasterPassword, statement: WHERE sid = 'J2E' AND componentID = '|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_ADS|ind|ind|ind|ind|2|0' AND paramname = 'adsUserPasswd'
ERROR 2007-05-23 13:12:37
MUT-02041 SDM call of deploy ends with returncode 4
ERROR 2007-05-23 13:12:37
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-23 13:12:37
FCO-00011 The step redeployFS with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|redeployFS was executed with status ERROR .
ERROR 2007-05-23 13:21:28
MUT-02041 SDM call of deploy ends with returncode 4
ERROR 2007-05-23 13:21:28
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-23 13:21:28
FCO-00011 The step redeployFS with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|redeployFS was executed with status ERROR .
ERROR 2007-05-23 13:41:19
MUT-02041 SDM call of deploy ends with returncode 4
ERROR 2007-05-23 13:41:19
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-23 13:41:19
FCO-00011 The step redeployFS with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|redeployFS was executed with status ERROR .
</i>
I have been running already the installation with 2 java SDK version: 1.4.2_09, 1.4.2_13.
Three days ago i downloaded a new version from the SDN. Tried to install it, received the same error. According to the error, there must be an error with the masterpassword, but i just used the "standard" typical installation. I just change the install drive / partion in the configuration screen before the actual installtation. May it helps to read the XCMDOUT.LOG:
<i>
> Subprocess starts at 20070523122713
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 db_enum
Execute Session Command : exit
> Subprocess stops at 20070523122713
OK
> Subprocess starts at 20070523122713
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 inst_enum
Execute Session Command : exit
> Subprocess stops at 20070523122713
OK
7.6.00.34 C:\sapdb\J2E\db
> Subprocess starts at 20070523122714
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -R C:\sapdb\J2E\db db_create J2E CONTROL,********
Execute Session Command : exit
> Subprocess stops at 20070523122719
OK
> Subprocess starts at 20070523122719
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 db_enum
Execute Session Command : exit
> Subprocess stops at 20070523122720
OK
J2E C:\sapdb\J2E\db 7.6.00.34 fast offline
J2E C:\sapdb\J2E\db 7.6.00.34 quick offline
J2E C:\sapdb\J2E\db 7.6.00.34 slow offline
J2E C:\sapdb\J2E\db 7.6.00.34 test offline
> Subprocess starts at 20070523122720
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_init OLTP
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070523122720
OK
OK
OK
OK
> Subprocess starts at 20070523122721
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput CACHE_SIZE 25600
Execute Session Command : exit
> Subprocess stops at 20070523122722
OK
> Subprocess starts at 20070523122722
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput LOG_MIRRORED NO
Execute Session Command : exit
> Subprocess stops at 20070523122722
OK
> Subprocess starts at 20070523122722
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput MAXUSERTASKS 15
Execute Session Command : exit
> Subprocess stops at 20070523122723
OK
> Subprocess starts at 20070523122723
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput MAXCPU 1
Execute Session Command : exit
> Subprocess stops at 20070523122723
OK
> Subprocess starts at 20070523122723
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput FORMAT_DATAVOLUME NO
Execute Session Command : exit
> Subprocess stops at 20070523122723
OK
> Subprocess starts at 20070523122723
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput LOG_IO_QUEUE 200
Execute Session Command : exit
> Subprocess stops at 20070523122724
OK
> Subprocess starts at 20070523122724
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput MAXLOCKS 300000
Execute Session Command : exit
> Subprocess stops at 20070523122725
OK
> Subprocess starts at 20070523122725
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput CAT_CACHE_SUPPLY 3000
Execute Session Command : exit
> Subprocess stops at 20070523122726
OK
> Subprocess starts at 20070523122726
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput JOIN_MAXTAB_LEVEL4 64
Execute Session Command : exit
> Subprocess stops at 20070523122726
OK
> Subprocess starts at 20070523122726
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput _UNICODE YES
Execute Session Command : exit
> Subprocess stops at 20070523122727
OK
> Subprocess starts at 20070523122727
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput DEFAULT_CODE ASCII
Execute Session Command : exit
> Subprocess stops at 20070523122727
OK
> Subprocess starts at 20070523122727
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput PACKETSIZE 131072
Execute Session Command : exit
> Subprocess stops at 20070523122728
OK
> Subprocess starts at 20070523122728
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_directput MCOD NO
Execute Session Command : exit
> Subprocess stops at 20070523122728
OK
> Subprocess starts at 20070523122729
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070523122729
OK
OK
OK
> Subprocess starts at 20070523122730
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_addvolume 1 DATA C:\sapdb\J2E\sapdata\DISKD0001 F 128000
Execute Session Command : exit
> Subprocess stops at 20070523122731
OK
> Subprocess starts at 20070523122731
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_addvolume 2 DATA C:\sapdb\J2E\sapdata\DISKD0002 F 128000
Execute Session Command : exit
> Subprocess stops at 20070523122731
OK
> Subprocess starts at 20070523122731
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** param_addvolume 1 LOG C:\sapdb\J2E\saplog\DISKL001 F 25600
Execute Session Command : exit
> Subprocess stops at 20070523122732
OK
> Subprocess starts at 20070523122732
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070523122733
OK
OK
OK
> Subprocess starts at 20070523122734
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20070523122740
OK
> Subprocess starts at 20070523122740
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070523122740
OK
State
ADMIN
> Subprocess starts at 20070523122741
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070523122741
OK
State
ADMIN
> Subprocess starts at 20070523122741
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,********
Execute Session Command : util_connect
Execute Session Command : db_activate SUPERDBA,********
Execute Session Command : exit
> Subprocess stops at 20070523122838
OK
OK
> Subprocess starts at 20070523122840
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** load_systab -u SUPERDBA,******** -ud ********
Execute Session Command : exit
> Subprocess stops at 20070523122903
OK
0,OK: everything works fine
0,""C:\sapdb\J2E\db\bin\x_python" "C:\sapdb\J2E\db\env\lsystab.py" -R "C:\sapdb\J2E\db" -d J2E -u SUPERDBA,********
Removing obsolete objects
Installing Loader tables
Installing messages and help
Installing SYSDBA tables
Installing comments for SYSDBA tables
Installing precompiler tables
Installing system tables for R3 backup information
Installing ODBC tables
Installing system tables for ORACLE (V7) mode
Installing data dictionary tables and views
Installing synonyms for oracle system tables
Installing comments on oracle sytem tables
Installing tables for WebAgent
Installing tables for Repository (WebDAV)
Installing DOMAIN tables
Installing comments for DOMAIN tables
Installing Views as replacement for SHOWs
Installing Database Manager tables
Installing SYSINFO tables
Installing comments for SYSINFO tables
Installing support for UDE (User Defined Extensions)
Installing tables for JDBC Database Metadata
Installing tables for SQLDBC Database Metadata
Installing additional triggers
==================================
Installation successfully finished
==================================
> Subprocess starts at 20070523122905
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,********
Execute Session Command : auto_extend ON
Execute Session Command : db_offline
Execute Session Command : db_online
Execute Session Command : exit
> Subprocess stops at 20070523122929
OK
OK
OK
> Subprocess starts at 20070523122941
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u control,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070523122941
OK
State
ONLINE
> Subprocess starts at 20070523122941
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u control,********
Execute Session Command : sql_connect superdba,********
Execute Session Command : sql_execute SELECT USERNAME FROM USERS
Execute Session Command : exit
> Subprocess stops at 20070523122942
OK
OK
END
'CONTROL'
'SUPERDBA'
> Subprocess starts at 20070523122943
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070523122943
OK
State
ONLINE
> Subprocess starts at 20070523122945
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u control,********
Execute Session Command : sql_connect superdba,********
Execute Session Command : sql_execute SELECT VALUE FROM DBPARAMETERS WHERE DESCRIPTION='_UNICODE'
Execute Session Command : exit
> Subprocess stops at 20070523122945
OK
OK
END
'YES'
> Subprocess starts at 20070523122947
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u control,********
Execute Session Command : sql_connect superdba,********
Execute Session Command : sql_execute CREATE USER SAPJ2EDB PASSWORD ******** DBA DEFAULTCODE UNICODE
Execute Session Command : exit
> Subprocess stops at 20070523122947
OK
OK
> Subprocess starts at 20070523122949
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u control,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070523122949
OK
State
ONLINE
> Subprocess starts at 20070523122949
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u control,********
Execute Session Command : sql_connect superdba,********
Execute Session Command : sql_execute SELECT USERNAME FROM USERS
Execute Session Command : exit
> Subprocess stops at 20070523122950
OK
OK
END
'CONTROL'
'SUPERDBA'
'SAPJ2EDB'
> Subprocess starts at 20070523122953
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u control,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070523122953
OK
State
ONLINE
> Subprocess starts at 20070523122953
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u control,********
Execute Session Command : sql_connect superdba,********
Execute Session Command : sql_execute SELECT USERNAME FROM USERS
Execute Session Command : exit
> Subprocess stops at 20070523122954
OK
OK
END
'CONTROL'
'SUPERDBA'
'SAPJ2EDB'
> Subprocess starts at 20070523122956
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n nbixp054 -d J2E -u CONTROL,********
Execute Session Command : util_connect
Execute Session Command : util_execute set log auto overwrite on
Execute Session Command : exit
> Subprocess stops at 20070523122957
OK
OK
</i>
My System Spec:
1,5 GHZ
2 GB RAM
10 GB free Disc Space
Java 1.4.2_09 or Java 1.4.2_13
I have no idea, what i can do right now!!!
Please help me!
Best Regards PhilippYou need a static IP, not a reserved DHCP, a static.
My Ten Step Program to Static IP is:
1) Double click the Network Icon (two PCs) in the system tray
2) Click Properties
3) Highlight "Internet Protocol (TCP/IP)" and then click Properties
4) Check the "Use the following IP address" radio button
5) Set IP Address to xxx.xxx.xx.xx ( I use the 4 digit PC number split in two. Make sure a ping of that address times out before you assign to ensure no one else has it)
6) Subnet mask should default to 255.255.0.0
7) Set Default Gateway xxx.xxx.xx.x
8) Set Preferred DNS server to xxx.xxx.xx.x
9) Set Alternate DNS server to xxx.xxx.xx.x
10) Grab large bottle of alcohol and enjoy the added functionality of a static IP address. -
Portal runtime error when trying to create new Iviews in EP
Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AMKrishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi -
I keep getting an error when trying to install Java for OS X 2014-001
I was trying to download this because I was getting errors when trying open some applications saying you need Java 6 and it directed me to the download link for this but it always gets and error when installing.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select
/var/log ▹ install.log
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. Don't post more than is requested.
☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
☞ Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit. -
I am getting an activation error when trying to sign in to FAceTime
I am getting an activation error when trying to sign in to FAceTime
me too after upgrading into lion..
-
Keep getting 5002 Error when trying to Sign In
Hello,
I created a new @me.com address today for a seperate Apple ID account. I am needing to sign into the iTunes Store, but I keep getting a response that says:
"We could not complete your iTunes Store request. An unknown error occurred (5002)."
Any ideas as to what's going on here?
I also took a screen cap of the issue:
Thank you for the help!
MarcusThank you for your response Carolyn; however, that article does not fix my problem. I am getting this error when trying to sign into the iTunes Store on my Mac.
I get the same problem when signing into the Store on the iPad or iPhone. I simply can't log in, but when I go to iCloud.com or the Apple ID login on Apple.com, it works.
Marcus -
I get error message "unknown error" When trying to log on to itunes via pc, help please!
I get error message "unknown error" When trying to log on to itunes via pc, help please!
Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H. -
Error when trying to update or download any app
I'm getting an Error when trying to update or download any app from Mac App Store
Every time I try to update xCode to version 6.2 but I get this error :
The server gave an error during download: 503 Service Unavailable.
So I tried to download a random app from the App Store but I got the same error message.
So any advices ?Hello HusseinAlBehary,
Sorry to hear your troubles updating and downloading apps from the Mac App Store. Based on when you were doing that, it looks like the Mac App Store was experiencing difficulties. It is not currently so you should be able to upgrade with out issues now. If you experience this in the future, look at the page below to start you on figuring out if it is something on your end or Apple’s end.
Apple Services, Stores, and iCloud
https://www.apple.com/support/systemstatus/
Regards,
-Norm G. -
Error when trying to access the RBAC User editor and Message tracking
Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Unable to load media error when trying to play a video in Sharepoint 2013
My team consistently gets an error when trying to play a video in SharePoint 2013. I can upload it, pick a thumbnail and save it. When anyone else goes to the intranet site and tries to play the video, they get a media failed to load error.
I have tried mp4 and wmv formats. I at first thought it had to do with the codec used in Camtasia to create the video, so I encoded it in Microsoft Encoder to a wmv and it still fails. All of the videos I upload fail for other users. If someone else uploads
a video, I get the error and cannot play the video. If I look at the library in Explorer, the video file is missing but the subdirectories for additional content and thumbnails are present. For the videos I upload and can play but everyone else
gets the error, I see those subdirectories as well as the video file itself.Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
Comments
Custom
963
404
HTTP
team.hagerman.com
/submissions/Compiled%20Videos/AutoCAD%20-%20Multiple%20Profile%20Icons/AutoCAD%20-%20Multiple%20Profile%20Icons.wmv
13
private,max-age=0; Expires: Tue, 11 Feb 2014 21:58:26 GMT
iexplore:15076
[#956]
Request:
GET /submissions/Compiled%20Videos/AutoCAD%20-%20Multiple%20Profile%20Icons/AutoCAD%20-%20Multiple%20Profile%20Icons.wmv HTTP/1.1
Accept: */*
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; .NET4.0E; Zune 4.7; AskTbAD2/5.15.4.23821)
Host: team.hagerman.com
If-Modified-Since: Wed, 26 Feb 2014 19:07:33 GMT
If-None-Match: "{8A07B719-341D-4BEE-BD61-F364394C3E98},2"
DNT: 1
Connection: Keep-Alive
Cookie: databaseBtnText=0; databaseBtnDesc=0; stsSyncAppName=Outlook; stsSyncIconPath=%2F%5Flayouts%2F15%2Fimages%2Fmenuoutl%2Egif; __utma=95027589.2092965952.1364844931.1393356332.1393429315.524; __utmz=95027589.1393268194.522.68.utmcsr=SilverpopMailing|utmccn=TE%20-%20St.%20Louis%20MCAD%20(12)|utmcmd=email;
__qca=P0-1092250856-1367500502168; km_ni=joyvoltenburg; km_uq=; km_lv=x; km_ai=joyvoltenburg; grvinsights=3a306cce826491ec77d9a195a63f57f2; __avc_32508=045-8a-724d-ee8f13e900daac4; Persistent_id_HgixPXFYDDdj0w=0C78ABCB2F34:1392388341; optimizelySegments=%7B%22178845731%22%3A%22false%22%2C%22178855892%22%3A%22ie%22%2C%22179190226%22%3A%22direct%22%7D;
optimizelyEndUserId=oeu1379624626946r0.0872463653920379; optimizelyBuckets=%7B%7D; __utmc=95027589; StorefrontCookie=cmen-US=en-US&bm=US; WSS_FullScreenMode=false; Ribbon.Read=1920886|-1|0|-687423497; Ribbon.DocLibListForm.Edit=682788|-1|0|1882364446;
Ribbon.Library=1920886|-1|710|-687423497; Ribbon.Permission=1920886|-1|1725|1598418443; Ribbon.ListForm.Display=1920886|-1|1620|-1006461573; previousLoggedInAs=; loginAsDifferentAttemptCount=
Authorization: Negotiate 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
Response:
HTTP/1.1 404 NOT FOUND
Cache-Control: private,max-age=0
Content-Length: 13
Expires: Tue, 11 Feb 2014 21:58:26 GMT
Server: Microsoft-IIS/7.5
X-SharePointHealthScore: 0
Public-Extension: http://schemas.microsoft.com/repl-2
SPRequestGuid: 1826789c-0589-80e7-31cd-3c1038ea29f6
request-id: 1826789c-0589-80e7-31cd-3c1038ea29f6
X-FRAME-OPTIONS: SAMEORIGIN
SPRequestDuration: 1132
SPIisLatency: 1
WWW-Authenticate: Negotiate oYGyMIGvoAMKAQChCwYJKoZIgvcSAQICooGaBIGXYIGUBgkqhkiG9xIBAgICAG+BhDCBgaADAgEFoQMCAQ+idTBzoAMCAReibARqhLWFbGbcecrn5kQ/ScMjrsqhag2XcrWQQ7g0Mb6ilZ+kFIPC6XJsH7+ldzTk3eQF/4C1f2nzJxENlP2M+75fOiRZGU/r0nvjgX5MdswmrBQkRg8iqKwcwJeE/3/P7nLWVitRs21hnB19oQ==
Persistent-Auth: false
X-Powered-By: ASP.NET
MicrosoftSharePointTeamServices: 15.0.0.4420
X-Content-Type-Options: nosniff
X-MS-InvokeApp: 1; RequireReadOnly
Date: Wed, 26 Feb 2014 21:58:25 GMT -
I keep receiving security errors when trying to open a pdf.
I keep receiving a security error when trying to run my javascript program, the function previously worked, but now creates an error after I entered the addWaterMark function. I have put my whole code below for my script.
The basic function is to load a text file into an array which has the path and file location, open the document, add a watermark, save the file, close the file, then repeat for the next array position.
I am using Acrobat Standard so I am unable to debug using the console, therefore I am struggling to understand what I am doing wrong. I will point out that I am not a fluent programmer, only have a basic knowledge of programming.
Code
app.addSubMenu(
cName:"Extras",
cParent:"Edit"
app.addMenuItem(
cName:"Import File",
cParent:"Extras",
cExec:"main()"
function main()
var fileCount = 0
var listOfFiles = []
listOfFiles = importData()
amountOfFiles = listOfFiles.length
for (var i =0; i<listOfFiles.length; i++) //calculates amount of entries in the array listOfFiles
newFile = openFile(listOfFiles[i]) //Opens current file
var d = app.activeDocs; //Gets current document title name
addWater(d[0]);
app.execMenuItem("Save");
for( var x in d ) d[x].closeDoc();
function addWater(myName)
{ app.alert("watermark",0);
myName.addWatermarkFromText(
cText: "OBSOLETE",
cFont: "Arial",
nFontSize:36,
aColor: color.red,
nOpacity: 0.5
//function SaveFile saves the current file but with an addition of WM to the filename
saveFile = app.trustedFunction(function(currentDoc, currentFileName)
{ app.alert("savefile",0);
app.beginPriv();
currentDoc.saveAs(currentFileName);
app.endPriv();
//function openFile which opens the file named in the variable currentFilename
openFile = app.trustedFunction(function(currentFileName)
{app.alert("openfile" + currentFileName,0);
app.beginPriv();
app.openDoc(currentFileName);
app.endPriv();
//importData function imports the paths and filenames contained in the list.txt located on the desktop
importData = app.trustedFunction(function()
{app.alert("import",0);
app.beginPriv();
cFilePath = "/C/Users/103019944/Desktop/File_List.txt";
var stmData = util.readFileIntoStream(cFilePath);
var cData = util.stringFromStream(stmData);
var cMsg = cData;
var fileArray = cMsg.split("\r\n");
for (var i =0; i<fileArray.length; i++)
return(fileArray);
app.endPriv();I have found the error, you are quite correct I had an extra letter in the filename, I thought I'd checked this but just shows that sattention to detail is the key.
The script works perfectly now, thanks you for your help, really appreciated.
Thanks again
Ben
Maybe you are looking for
-
Is there a way to choose multiple "send to" addresses at the same time?
I would like to send mass e-mails to different people from my contact list for different topics, picking the addresses each time rather than using a group. I have found the " + " sign for accessing the contact list, but I can't figure out how to sel
-
Getting Error while starting weblogic
Hi All, I have 2 machines (1M for DB and 1M for OIM). I have taken clone of both machines and i changed their IPS and HOST NAMES(In all locations that needs to be done) . 1. In DB Clone Machine i have created DB repositry successfully and i started D
-
JDOM beta 8 installation - compilation errors
Can someone give me some suggestions? I am spinning my wheels on what to do. This should be fairly simple... I installed and extracted jdom beta 8, added the location to xerces.jar to my classpath, and I still receive the following errors: FibonacciJ
-
For some reason, any programs I use to see the FSB clock and CPU clock fail to recognize the clocks. I can see it in the BIOS and if I use CPU-Z but can't see it with Dual Core Center and nVidia nTune. And one more question, I know this isn't related
-
Unable to stream Channel 4 live
This service is completely unwatcheable. Long pauses and regular message saying 'insufficient bandwidth' According to speedtest.net my connection has 32ms ping and 50M+ download speed. Using Chrome Version 25.0.1364.97 with no addons or ad blockers.