Winrip mp3 recording format greyed out

I have the Neo 875P Fis2R board. When I installed winrip 2.1 that was included in the MSI Superpack software, I found that mp3 was greyed out. I cannot select recording to MP3.
Any help here would be appreciated.

As a rule I don't usually use any of the software that is bundled with MSI hardware...it's a crapshoot at best most of the time...if you need something that will rip cd's then a third party freeware is probly your best bet...you can always rip to wma format which is smaller and just as good, just get the powertoy package from MS's site...a lot of players are supporting it these days...
Bonz

Similar Messages

Master Boot Record is greyed out, so how to use?

How do I use Master Boot Record (in Mountain Lion, to partition an external Seagate Backup+ hard drive) when it is greyed out and I can't choose it? I tried turning off Time Machine, but that didn't do anything. I also tried installing various Seagate software (like HFS4Win.exe) because what I really want to do is use one partition on the drive as back up when I'm using the Mac OS, and the second partition as back up when I'm in Windows 7 (with maybe a third partition for storage for either/both - it's 3tb). I've spent a few days at the Seagate page and nothing suggested there works, but re-formatting the drive with Master Boot Recorded sounds promising, and it won't let me!
If anyone has a solution please let me know! I'm reasonably adept!
Songsterr

Hi Lee,
If "Manage Catalog" option is greyed-out, it may be possible that you are in the "eLive" room. As in "eLive", most of the File option are displayed.
Switch to "Media" room, the option "Manage Catalog" will be enabled.
Then, please follow the steps mentioned in the article to convert the catalog Elements Organizer Help | Creating and editing catalogs.
Please let me know if you need any other assistance.
Thanks,
Swapnil

Recording Modes greyed out

All my recording modes have greyed out, as the attached screen shot, so I cannt change options.
I seem to be stuck in Demo mode.
Any ideas what I have done wrong?
Noel
England

Hi Noel
Please note that if you have an image, you may insert it inline using the little camera icon just above where you type the post.
This way we may see your image immediately and not have to wait for the forum mods to make it available in the attachments section.
So it will be helpful if you could reply and add the image that way. Perhaps then we might better help you.
Also, what version of Captivate are you using?
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

MOV format greyed out?

Hey. I have a school project Im working on, and I have a few MOV files i want to import to iMovie '09. The problem is, only several of them will actually import, and I have close to 100. Most are greyed out, and only three or four will actually import. Any suggestions?

IMovie will only import clips with codecs that it can edit. It is important to realize that MOV is a container, not a codec. It is possible to have clips within an MOV container that iMovie cannot edit.
Also, iMovie will not import files with closed captioning tracks, tween tracks, chapter tracks, and the like. If your MOV file contains one of these, it will not import.
In order to give you specific advice, pick one of the files that will not import, and open it using QuickTIme Player. Then click WINDOW/INSPECTOR on the top bar (or click Command-I). This should open the QuickTime Inspector. Then tell is what you see there, especially the dimensions and everything next to the word FORMAT:.

Record Button greyed out

I Have just recieved a new HP computer with the complete CS5 package. Have hooked up the audio leads through Black Magic Intensity Pro but when I go to record the audio from my tape deck into one channel - I go to the record button at the bottom of screen , then a smaller window opens up again with record button , stop & play buttons along bottom of smaller screen. These are greyed out. At the top it says INPUT - Black magic audio - Settings. Nothing happens when you click on settings though. Any ideas out there. Maybe I have to arm a track. Can't see where you do that though.

Do you have the Black Magic selected as default input device in your System sounds? For some reason HPs are quirky about that. My dad's refuses to set his headset mic as a default device for skype, yet it WILL set the headset speakers as soon as he plugs them in.

Instruments record button greyed out with iPhone

When I try to profile my iPhone app using Instruments the record button is greyed out and I can't do anything.
If I try to start from xcode using the "start with performance tool" menu it just says target failed to start.
I've tried removing the iphone from the organizer and plugging it back in.
Any ideas?

I also have the same problem, and running Instruments on the Simulator is not an option, since my problem is that there are sprites that are drawn correctly on the Simlator and are not visible on the Device.

Moving iPhoto to external drive; have formatted external disk to Mac OS Extended (Journaled), moved the iPhoto library to external drive; when trying to change the library, the iPhoto file on new external is greyed out can't be selected.What went wrong?

Must have done something wrong..
1. formatted external disk to Mac OS Extended (Journaled) - required a partition, but that went fine. Entire new external disk was included in the partition formatted to Mac OS Extneded (journaled).
2. moved iPhoto library to new external disk
3. Holding Option key down, opened iPhoto
4. Choose library feature appeared, however when new library function option appeared and "choose library" selected, the iPhoto folder appearing in the new external drive was greyed out and not able to be selected. Therefore the default library remains the original iphoto library on the Mac.
I've moved the original iphoto library to the trash and then tried to start iPhoto. A message comes up that the iPhoto is in the trash and needs to be pulled out before iPhoto can start (clearly the new iphoto library on the external drive is not being seen.
Can anyone suggest where I went awry? Thanks!

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
Then try select it again.

Playing recorded loops (they stay greyed out)

When recording on a loop , it creates multiple recordings, and places it on a new track. I love this functionality! However only the last loop recorded lets me play it / hear it. How do I enable the other tracks so that i can hear them (ungrey them out / enable them). Much thanks in advance for any help!
ps - I searched for this but couldnt fund any relevant results
-B

Timothy Shider, "Playing recorded loops (they stay greyed out)" #4, 07:18pm Oct 17, 2005 CDT
Timothy, this has nothing to do with this topic.
Start a new thread. (but this time, release the caps lock OK )

Hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute

hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute...
i tryed diffrent commands such as diskutil eraseDisk JHFS+ Disk1
diskutil list , wont show up my harddrive , i now its functionally cause it shows up in disk utility with name and i can get info about it , but everything is greyed out can only switch between "erase , partition , recover , Raid ,....
when i click the apple in the top left corner the whole menu is greyed out... what to do ? help me please
Sincerly AppleNoob92
p.s i have no experience in apple imac's at all never used before, but im kinda windows nerd so computers i understand but this imac make my insane, cant seem to find any solutions anywhere on the WWW....

Your HD may be crashed, so you probably should use the oringinal install discs to run Apple Hardware Test in extended mode. If error codes appear this confirms a hardware failure. In addition you cannnot repair the HD using Disk Utility from the startup disk, you have to use the origninal Install discs that shipped with the computer or the most up-to-date version of OS X on a disc that you have.

I used a usb turntable to import old vinyl records into iTunes. Then with the cloud and iTunes match I put them on another Mac. The songs come up in the music list but they are greyed out. How do I get them recognized.

I used a usb turntable to import old vinyl records into iTunes. Then with the cloud and iTunes match I put them on another Mac. The songs come up in the music list but they are greyed out. How do I get them recognized. The symbol states the songs were downloaded from iCloud. I would like to get them to play so that I can make a playlist, and burn a CD.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Greyed out Volume Format box in Disk Utility 10.4.

Hi,
i'm trying to open up more space on my hard drive by doing a full erase. Available space is about 6GB on a 80GB drive. Running OS X 10.4.11. on a Mac Book Black. Want to install 10.6. SL.
In Disk Utility the Volume Format box is greyed out. It's set as Mac OS Extended (Journaled).
How can i change it?
Thanks for any advice.
Mark

How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is likely the easiest/best, and is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/
And if needed, you can use Terminal to run it in admin mode to see files/folders your user can't see...
http://www.macobserver.com/tmo/article/how_to_recover_missing_hard_drive_space/

Format links are greyed out

I have set up links with success but when I try to format them I am having a problem. I select the link and on link inspector choose format. The options are greyed out. Help suggested opening the colour palate but no good. I am using blank pages with formal theme. Pages otherwise not complex.
Appreciate help
David Thomas

David:
Are you trying to format text based hyperlinks or an ojbect? The formatting pane only works when you select text based hyperlinks. Be sure not to just select the text box that the text is in.l
OT

When trying to format my internal hard drive, it's greyed out in Disk utility?

I'm trying ot format my computer and wipe everything off before giving it away, but Disk Utility has everything greyed out and won't let me choose my hard drive. I have the original CD and everything that came with the computer. How do I fix this fast?

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

My computer froze during match initial formatting. Now some songs are uploaded others are "greyed out." If I go song by song, I can update match. How can I do this all at once and also update album art?

My computer froze during match initial formatting. Now some songs are uploaded others are "greyed out." If I go song by song, I can update match. How can I do this all at once and also update album art?

Hi gdogk,
If there was an interruption during the initial iTunes Match process and you are now having issues with playback and album art, you may find the troubleshooting steps outlined in the following article helpful. In particular, you may want to turning iTunes Match off, then back on again, as noted here:
If iTunes Match is already enabled on your computer or device, try turning iTunes Match off and then on again.
Mac: While holding down the option key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
Windows: While holding down the shift key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
How to troubleshoot iTunes Match - Apple Support
Regards,
- Brenden

Data Merge Multiple Records Per Page Greyed Out

I am using InDesign cs5.5. I am attempting to create a catalog with the data merge option. I am attempting to do a data merge from the Master Page.
As you can see in the image, I have inserted my fields from the data source file. All images, original file, and data source file are in the same folder. I am inserting this info on the left sheet of the master file. When I select "Create Merged Document" the "select multiple records per page" is greyed out, however, there is plenty of room on the page for the 8 records I want it to show. See image below.
After watching tutorials, reading, etc. I made sure that my document does not have facing pages. I deleted my "page 2" to avoid that conflict. I made sure that the placeholder "allows overwrite from the master". I also deleted my "cache"/settings" by doing "ctrl, alt, shift" when reopening the program. I read that it may be because the files need to be on the right hand sheet of the master, however, when I move my info to the right sheet, I get the following message.
I have watched the tutorial videos, read the entire help section regarding data merge, and have correctly created my data source file. I've tried everything I've seen on the forums, apart from uninstalling and reinstalling. Please tell me that someone can help me figure this out as soon as possible. I'm in crunch time!
Thanks a lot.

Thanks Peter. That helped me un-grey the multiple records. I was able to complete a data merge, however, this is what happens.
As you can see in this image, I have the margins setup the way I prefer, and the data merge previews correctly.
Once I click to merge, this is the new document I get - it's only putting one record per page (even though the multiple records per page is selected), and it inserts this layout, not onto actual pages in indesign. It looks reall odd.
And when you scroll down,
Any suggestions on fixing this?
Also, my InDesign freezes up when I try and do a merge of my entire sheet (182 items). The images above are when I tested doing just records 1-32.
Thanks in advance and thanks for being so prompt yesterday. Very helpful.

Winrip mp3 recording format greyed out

Similar Messages

Maybe you are looking for