Winscp in Run Program activity

Hi,
The Run Program activity never ends when running winscp.com using these parameters; /command "option batch abort" "option confirm off" "open ftp_test_account" "put d:\data\* /VPT/*.TMP" "exit". The log file
shows the program ran and ended but the Run Program Activity stays active. < 2014-07-24 02:54:19.751 200 Command PORT okay.
> 2014-07-24 02:54:19.751 STOR test.001.TMP
< 2014-07-24 02:54:19.767 150 File status okay; about to open data connection.
< 2014-07-24 02:54:19.970 226 Transfer complete.
> 2014-07-24 02:54:19.970 MFMT 20140724005400 test.001.TMP
< 2014-07-24 02:54:19.986 213 ModifyTime=20140724005400; test.001.TMP
. 2014-07-24 02:54:19.986 Upload successful
. 2014-07-24 02:54:19.986 Got reply 1 to the command 4
. 2014-07-24 02:54:19.986 Session upkeep
> 2014-07-24 02:54:19.986 Script: exit
. 2014-07-24 02:54:19.986 Session upkeep
. 2014-07-24 02:54:19.986 Script: Exit code: 0
. 2014-07-24 02:54:19.986 Got reply 1004 to the command 4
. 2014-07-24 02:54:19.986 Disconnected from server

Hello Abdul Karim,
You need TCP 445 for the installation of the service (which seems to work fine),
TCP 135 for communication with the endpoint mapper and after that comunication switches over
to the highport that was assigned by the endpoint mapper
for communication with the service manager (for controlling the Orchestrator Run Program Service).
By default the dynamic port range on Windows Server 2008 is 49152 to 65535
(refer to: The default dynamic port range for TCP/IP has changed in Windows Vista and in Windows Server 2008:
http://support.microsoft.com/kb/929851).
But since there is no firewall I doubt that to be the problem...
Oh, by the way: Is the "RPC Endpoint Mapper" Service running on your target server (and what about "Remote Procedure Call (RPC)")?
Regarding my question about the OS: There was a (meanwhile fixed) problem some time before with Win2003 but on that occasion the service was not installed at all.
Are you using Orchestrator SP1 or R2?
Regards,
PIfM

Similar Messages

Need help in using [RUN PROGRAM] Activity against a server in another domain

Hi Experts,
We have two domains with two way trust enabled. Orch server exists in DomainA and target server exists in DomainB.
We are trying to execute some scripts(g:IPCONFIG) from orch server to target server using RUN PROGRAM activity. This is running fine and give expected results, if I give Built-in Administrator credentials in Security Tab. But I'm getting some
strange values like chinese/japanese language strings, If I use a DomainB/DomainA user (Part of local admin of the target server) in security tab as well as Advanced tab-->Runas.
Things I tried:
- DomainA/DomainB user in Security Tab as well as RunAs tab  ---> Strange Strings
- DomainA/DomainB user in Security Tab and BuiltIn Administrator in RunAs tab  ---> Strange Strings
- BuiltIn Administrator in Security Tab ---> Expected result
- BuiltIn Administrator in Security Tab and DomainA/DomainB user in RunAs tab  --> ProgramExitCode = -10xxxxxx
But our requirement is to run the script on the target server as Domain User(Part of local admin).
Thanks in Advance
Thanks and Regards, Narayana Babu

Hi Experts,
We have two domains with two way trust enabled. Orch server exists in DomainA and target server exists in DomainB.
We are trying to execute some scripts(g:IPCONFIG) from orch server to target server using RUN PROGRAM activity. This is running fine and give expected results, if I give Built-in Administrator credentials in Security Tab. But I'm getting some
strange values like chinese/japanese language strings, If I use a DomainB/DomainA user (Part of local admin of the target server) in security tab as well as Advanced tab-->Runas.
Things I tried:
- DomainA/DomainB user in Security Tab as well as RunAs tab  ---> Strange Strings
- DomainA/DomainB user in Security Tab and BuiltIn Administrator in RunAs tab  ---> Strange Strings
- BuiltIn Administrator in Security Tab ---> Expected result
- BuiltIn Administrator in Security Tab and DomainA/DomainB user in RunAs tab  --> ProgramExitCode = -10xxxxxx
But our requirement is to run the script on the target server as Domain User(Part of local admin).
Thanks in Advance
Thanks and Regards, Narayana Babu

Run Program activity not exiting

I'm running SCOrch 2012 R2 and am having trouble with a runbook hanging. Here are the facts
My runbook executes a script (the code for which, I have included below) that gets a list of AD users and exports that list to a .csv file.
When run manually, from a Powershell window, the script executes and returns the expected file, before returning to the prompt.
When run through the SCOrch, the script runs fine, with the output file created and the Powershell process exiting.
The commands I'm using to execute the script manually and through the runbook, are the same (see below) and the run-as accounts are the same.
The runbook never gets past the step that runs the Powershell script.
The activity looks like this:
Command execution
Command: cmd.exe /c | C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe –c "C:\it\getADUserProperties-Parameterized.ps1 -SearchPath 'ou=customer,dc=domain,dc=tld' -DomainName domain.tld | Export-Csv C:\it\userList.csv -NoTypeInformation"
Run as account credentials specified
The rest of the options are set to the default values
The question is, why doesn't the Run Program activity close when powershell.exe exits? I know it won't matter, but here is the script anyway:
<#
.Synopsis
Get Active Directory user list with a user-specified set of properties
.DESCRIPTION
Get a list of Active Directory users from a user-specified list of containers (or the root of the domain) and return a user-specified set of attributes.
This script can connect to non-native domains (domains that the executing computer is not a member of) if DNS is configured properly. If accessing a
non-native domain, the script will prompt for credentials.
.NOTES
Author: Mike Hashemi
V1 date: 15 August 14
.LINK
.PARAMETER DomainName
Defines which DNS domain to connect to.
.PARAMETER SearchPath
Default value = cn=users,dc=domain,dc=tld. This parameter represents the AD to search and can contain multiple values.
.PARAMETER OutputProperties
Default value = Name,Enabled. This parameter represents a comma-spearated list of AD attributes to return.
.EXAMPLE
.\getADUserProperties-Parameterized.ps1 -DomainName domain.tld
This example will output the name and enabled status of all users in "cn=users,DC=domain,DC=tld" and below.
.EXAMPLE
.\getADUserProperties-Parameterized.ps1 -OutputProperties name,telephoneNumber | Export-Csv C:\userList.csv -NoTypeInformation
This example will output the name and telephone number of all users in "cn=users,DC=domain,DC=tld" and below. Output will be sent to c:\userList.csv.
#>
[CmdletBinding()]
param(
[Parameter(Mandatory=$True)]
[string]$DomainName,
[string[]]$SearchPath = 'cn=users,DC=domain,DC=tld',
[string]$OutputProperties = 'Name,Enabled'
Import-Module ActiveDirectory
If ((Get-Module ActiveDirectory -ErrorAction SilentlyContinue) –eq $null) {
Write-Error "This script requires the Powershell Module: 'ActiveDirectory'. Please make sure you've got the correct tools installed."
Exit
Else {
Foreach ($ou in $SearchPath) {
Try {
Write-Verbose ("Getting users from {0}." -f $ou)
Get-ADUser -Filter * -SearchBase $ou -Properties $OutputProperties.Split(",") -Server $DomainName | Select $OutputProperties.Split(",")
Catch [System.Security.Authentication.AuthenticationException] {
Write-Output ("Connection failed. Prompting for credentials to {0}" -f $DomainName)
$cred = Get-Credential -Message "Enter credentials for $DomainName."
Write-Verbose ("Getting users from {0}. with user: {1}" -f $ou, $cred.Username)
Get-ADUser -Filter * -SearchBase $ou -Properties $OutputProperties.Split(",") -Server $DomainName -Credential $cred | Select $OutputProperties.Split(",")
Thanks.

mhashemi,
I had a simliar issue as you did where my runbook would run until it got to the "Run .Net Script" Activity and then the Runbook would just stop. What I found was you can not have the command "Exit" in your script. The command "Exit"
will force the Activity to close and will not output any variables.
I am not the only one to find this issue.
Check out the article labeled
"Run .Net Script (powershell), "exit" and published data" on technet under
System Center Orchestrator > System Center Orchestrator - General
(not able to post the link, I am restricted)
Doesn't sound like there is going to be a fix anytime soon
Hope this helps
-Ozarkclay

Contacting workgroup server requires run program-activity?

Dear Technet-group
I am currently working on runbooks within our environment.
The current setup is that we have several Domain-joined servers and some Workgroup servers. The runbookserver is domain joined.
When contacting workgroup servers, I encountered an issue where I need to add the "Run Program" activity and fill in the local credentials in the "Run As" tab instead of filling in the security tab to make the runbook run succesfully.
Has anybody encoutered this bug before or does anyone have a possible fix for this?
KR,
Mitch

Hello Stefan,
Thank you for replying.
I think I might have formed my question incorrectly. Let me explain my problem in detail.
My situation is as followed.
1 workgroup server as testpurpose.
My Orchestrator-environment in a domain.
As a form of testing, I created a very simpel runbook with the local admin credentials in the security tab, so that account has more than enough permissions.
The runbook contains 2 activities. 1 intialize data, which only contains the input of the server's IP to connect to and 1 get Disk Space Status, which gets data from the testpurpose-server. Inside the "Get Disk Space Status" I filled in the local
admin's account under the security tab, enabling him all permissions.
When I run this runbook, it fails giving me the message: "Failed to connect to disk"
However, I found out that when I add the "Run Program"-activity infront of the "Get Disk Space Status", clear out the security tabs and fill the account in under the Run As-tab and add a simpel "date" command to be executed,
I do manage to get a success.
This is however a workaround for the issue we are having. Have you ever encountered something like this?
Thank you for your time.
Kr,
Mitch

Telnet with Run Program Activity

Hello Experts,
I have a quick question with respect to the Run Program Activity. Is it possible to have a telnet session with the run program activity without loosing the connection ?
So my first activity will be the telnet connection. Once the connection is established I will then execute a command to get the output.
However, when I execute the runbook it establishes the connection and closes it immediately. As a result the next command does not get executed. When I throw the output to a text file, it says invalid command which means that the telnet session gets closed.
Is there any other way to do this ?
Regards,
Abdul Karim. (http://sites.google.com/site/scomblogs Twitter:@Abdul_SCOM)

Hello,
Yes I tried the same with SSH and the activity still fails.
I also tried pwershell script, however the .Net Activity fails saying telnet is unrecognized command.
So how are we to achieve telnet commands using SSH or Run Program Activity.
Is it supported in the first place ? If I only have a run program activity to telnet and I try to capture the output in a text file, I see that the telnet session itself fails and the exit code is -1.
If I use something like dir or ipconfig/flushdns etc they all return exit code of 0.
Moreover, for telnet sessions since it will be based on a unique process ID, how can we configure the next set of command using the same ID ?
Regards,
Abdul Karim. (http://sites.google.com/site/scomblogs Twitter:@Abdul_SCOM)

Powershell Hang when using Run Program (2012 R2)

I've seen a couple posts about this in the past but nothing recent. I am calling a powershell and passing through some variables to run program activity in orchestrator. The program runs (in this case the DB is created) and the script finishes, however the
activity does not. I've tried two solutions:
http://blog.coretech.dk/jgs/sco-2012-running-powershell-scripts-via-run-program-activity/
and
http://www.sc-orchestrator.eu/index.php/scoblog/67-running-powershell-with-the-run-program-activity-from-orchestrator
Neither of which seem to do the trick. Here is my command
Note: The script runs fine when called on the machine locally. For sake of cleanliness I've removed my <Nul 2>&1 attempts.

I have found in these situations that having a non-stop error seems to get it from freezing (along with <Nul 2>&1). I use 'Get-Content "C:\Farce.txt"' as my last line.

PE 12 won't install on my Mac. Message says close running programs but none are running

Why won't Photoshop 12 for mac install? I get a message to close running programs but none listed and none are running. Tried several times including restarting computer

Tried that but nothing other than the Finder was open in activity monitor. However stumbled on the fact that Sugarsync was running although it did not show up anywhere. Closed it and installation worked!
Sent from my iPad

How do I stop running programs.

I am using my Imac for recording purpose so I would like to stop the programs which are not needed.that may be running in the background.On my pc I go to the tak manager & find what is running.Is there a task manager type thing where I can go & stop running programs that use up CPU & cuase clicks & noises during recording.

You can use the Activity Monitor located at the Applications/Utilities. You can also access this by simultaneous pressing on your keyboard the following keys: Command Option and Esc. That would prompt you to a window called Force Quit. There you would see applications that are running.
Another option is like what is stated above, that you can see in your Dock what applications are running. You would see a little blue shining circle/oval below the open applications. Just left click for 1-2 sec the icon of the program you want to close and click on Quit.
Hope this would help you and good luck with your recording!

Running Programs with Screen Closed

I cant figure out how to run programs with my screen closed. For instance, I'm signed on AIM and I close the screen and when I open it back up, I'm no longer signed on AIM. It's very frustrating. Any type of assistance would be greatly appreciated. Also, is there any phone number available that will connect me directly with customer service?

Unfortunately, unlike PC counterparts, your laptop has 1 function with the laptop on, and screen closed - Sleep.
Sleep can be reversed with closing the lid as described above, having an EXTERNAL mouse and or keyboard and activating the computer that way.
It is really designed to run closed when use with a large display - that is what that feature is.
Unfortunately you either have to keep your lid open, or accept the fact that you won't be on AIM when you close the lid.
Now please don't get offended with the last part I have to say about AIM:
I used to hate the fact that when I closed the lid, I was kicked off AIM. I now love it. The reality is that none of us are really all THAT important that signing out of AIM is the end of the world. There's email, and there's the telephone if someone has something emergent, urgent, important, or barely important to tell someone.
I feel like AIM has dumbed down communication as we know it, creating a world of "acquaintances" and "buddies" instead of "friends".
Like I said, please take no offense, i just think we all deserve time away from AIM...
Sorry there aren't any other solutions for you.

Error with Run Program Service in invoke runbook.

I made main runbook (it do some things) and on the end i pute invoke runbook. In this child runbook i have
Run Program activities with Java srcipt.
When started this rb finaly i get error Could
not start Orchestrator Run Program Service service on 10.56.7.17 - Access is denied. (code 5),
but when manually i run this child runbook with any chaneges and this same date it works well.
In this Run Program i set that it ryn from admin acount but that don't nothing changes.
Where is problem?

When you run it manually (with Runbook tester I assume) the Runbook will use
your admin credentials to perform all of the actions. When it runs scheduled or with an invoke from somewhere else it will use the credentials of the user account you've assigned to the Runbook service.
As a test, check which user is assigned to the service (via services.msc) and make that one a temporary local admin on the target machine. If it works, then you know it's permissions related to that specific account.
I give up ;), Yes, I testing by Runbook tester. But not shure that we understand :)
I have two scenarios (i can't put images, i need to verify my account).
1) One runbook. Exp. name" child. Inside is Run Program, that program is on different server.
Its work only when in options this activity i set local admin account from that server.
2). I created new runbook - parent. In this I put invoke runbook linked to that child. I do not change anything else. Now i will try run it (from tester, web console or scheduled) i get error
Could not start Orchestrator Run Program Service service on 10.56.7.17 - Access is denied. (code 5).
What I do wrong, what I think wrong?

SCO 2012R2 CU2 - Run Program (Local on MS) error

Am trying to simply 'Run Program' locally on the runbook server (single box with remote DB configuration. Both the Orchestrator Service and the RB service are local admins and in the Orch Sys Grp (more than needed I know).
The program is a simple one msg.exe localhost test
Runs fine on the system outside of SCO, with my acct and the RB acct.
When I appempt to run in via the console (Test Console) (1 activity only) it errors out with "Could not install service - Orchestrator Run Program Service: Access is denied. Installing Orchestrator Run Program Service requires administrative
privileges on the target computer. "
I have tried different variations of the Run As and the Security Tab on the activity but frankly I have run this MANY times at MANY customers and never run into this. Also double checked COM permissions
Anyone have any ideas

Hi,
there are differences executing a Runbook with Runbook Tester:
http://www.sc-orchestrator.eu/index.php/scoblog/99-functionality-differences-executing-a-runbook-with-runbook-tester
I guess the account which started Runbook Designer/Runbook Tester is no local admin on the target system.
You can specify a local admin (domain\user) in tab Security of the Activity. This account is used to trigger the (installation of) Orchestrator Run Program Service.
The Run As is perhaps needed to execute the program.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Access to a FG from another running program

Group, Is there any way to "get a hold of" a reference of a functional global running inside another vi? I have a program that uses a functional global to pass data between vi's of a program. I have this program starting up as a service when I start the computer so I don't really have access to its front panel. Part of the data that the FG holds is a STOP flag and will shut down mulitple parts of this program. I would like to build another program that I can start and run at will that will set the STOP flag in the "hidden" running program. I am not sure quite how to do this.
Thanks
Todd

What you are essentially asking to do is to access an internal resouce of another program. Doesn't really matter if it's a LabVIEW program. In your case you could enable the ActiveX server for the other program so you can access the VI that way. The LabVIEW Help contains information on how to enable the ActiveX server for an app and how to use it from another application. You could also use shared variables. You can take a look at this overview for more ideas:
Community: Inter-Application Communication

I am having a problem w/ my itunes working correctly due to accidentally running Itunes through my troubleshooting, running programs made for previous versions of windows!! How do I turn it off?!??

I am having a problem w/ my Itunes working correctly, after accidentally running Itunes through my troubleshooter to, Run Programs Made For PreviousVersions of Windows. It keeps popping up that the Compatibility Version is on, to make sure it's off before opening my Itunes Account. I've looked everywhere, Please, Please, How Do I Make This Right??!??

It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009

How do i stop two processes that are running in activity monitor

how do i stop two processes that are running in Activity Monitor took one out of trash and it says preparing to move desktop still running with another one been running for hrs now want to stop these many thanks jen.

Select each one and Force Quit it.
But be careful there are many processes that are run by the OS that if quit will cause problems possibly even crash the system.
regards

Winscp in Run Program activity

Similar Messages

Maybe you are looking for