Winscp not connecting to solaris box

Hi,
  Installed Oracle Solaris 11 on vm machin of dl385 G2. I was able to connect and login.
I am trying to access it with in the home net work using winscp and not able to connect: host name error I am getting. Als added the solaris system name in etc\hosts file. still having the same issue.
Thank you
Raja

Can you check if when you use the IP address it's working ?
Then if this works, check that you can resolve the hostname in your Windows machine.

Similar Messages

  • From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software.  I registered and activated the software last year.  When I click to activate, I get a message that I am not connected to the internet.  I am

    From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software.  I registered and activated the software last year.  When I click to activate, I get a message that I am not connected to the internet.  I am connected.  How do I get Editor to work?

    You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them.  This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
    A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website.  This is what happens if you buy PSE from a brick-and-mortar store like Best Buy.  I don’t’ know what happens if you purchase the downloaded version as I have never done that.
    A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once.  The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
    In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

  • [Solved]Some ISPs seem to be connected to my box: ones that are not...

    Recently in the last few days I have been noticing on my Conky's Port monitor that a Roger's address (something like o1287YI.rogers.com), a Virgin mobile address, and a shaw address have been making active connections to my box on the most obscure port (in the range between like 25000-27000). These appear even when I am not running a web browser.
    Would they be doing any harm? If so how do I kick them off?
    I would post screenshots, but the image functions require that they be uploaded somewhere on the web.
    Edit: Note that conky lists them as an "Outgoing connection". What the...?
    Scott
    Last edited by Scotty (2010-10-04 03:25:45)

    Without grep:
    [root@Scott-Desktop scott]# netstat -tp
    Active Internet connections (w/o servers)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 192.168.1.96:51985 checkip-ams.dy:www-http TIME_WAIT -
    tcp 0 116 192.168.1.96:52000 checkip-ams.dy:www-http ESTABLISHED 24360/wget
    tcp 0 0 192.168.1.96:59166 checkip-ewr.dy:www-http TIME_WAIT -
    tcp 0 0 192.168.1.96:46176 checkip-pao.dy:www-http TIME_WAIT -
    tcp 0 0 192.168.1.96:51975 checkip-ams.dy:www-http TIME_WAIT -
    tcp 0 0 192.168.1.96:46122 checkip-pao.dy:www-http TIME_WAIT -
    tcp 0 0 192.168.1.96:59173 checkip-ewr.dy:www-http TIME_WAIT -
    tcp 0 0 192.168.1.96:46141 checkip-pao.dy:www-http TIME_WAIT -
    tcp 0 0 192.168.1.96:51947 checkip-ams.dy:www-http TIME_WAIT -
    tcp 0 0 192.168.1.96:44781 bas1-montreal48-1:46472 ESTABLISHED 21967/skype
    tcp 0 0 192.168.1.96:59163 checkip-ewr.dy:www-http TIME_WAIT -
    tcp 0 0 192.168.1.96:46165 checkip-pao.dy:www-http TIME_WAIT -
    tcp 181 0 ::ffff:192.168.1.:54783 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54868 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54685 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54872 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54871 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54869 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54676 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54857 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54675 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    [root@Scott-Desktop scott]# killall skype
    [root@Scott-Desktop scott]# netstat -tp
    Active Internet connections (w/o servers)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 192.168.1.96:52012 checkip-ams.dy:www-http TIME_WAIT -
    tcp 0 0 192.168.1.96:52014 checkip-ams.dy:www-http TIME_WAIT -
    tcp 1 0 192.168.1.96:38824 192.168.1.254:www-http CLOSE_WAIT 12680/chromium
    tcp 0 0 192.168.1.96:44781 bas1-montreal48-1:46472 TIME_WAIT -
    tcp 0 116 192.168.1.96:52032 checkip-ams.dy:www-http ESTABLISHED 24456/wget
    tcp 181 0 ::ffff:192.168.1.:54783 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54868 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54685 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54872 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54871 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54869 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54676 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54857 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54675 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    [root@Scott-Desktop scott]# netstat -tp
    Active Internet connections (w/o servers)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 192.168.1.96:44781 bas1-montreal48-1:46472 TIME_WAIT -
    tcp 0 116 192.168.1.96:52032 checkip-ams.dy:www-http ESTABLISHED 24456/wget
    tcp 181 0 ::ffff:192.168.1.:54783 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54868 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54685 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54872 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54871 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54869 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54676 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54857 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    tcp 181 0 ::ffff:192.168.1.:54675 ::ffff:142.33.96.:https CLOSE_WAIT 22538/java
    It appears the offender was Skype. Killing it has made the connection go away now.
    But why the heck was Skype doing that?
    Last edited by Scotty (2010-10-04 00:38:20)

  • I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

    I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Safari, iTunes, software update iCal not connecting. Firefox is fine. Tried Proxies, but not sure what to do there. Only one box was checked, I unchecked it, and made no difference. Have also tried some other DNS numbers, nothing worked yet.

    Hi There,
    Safari, iTunes, software update iCal not connecting. Firefox is fine.
    I have found some archieved discussions about this, but none that went  into detail about how to fix problem using proxies - I don't really  understand what they are/ do.
    I went into the Proxies screen, Only one  box was checked, "Use Passive FTP Mode (PASV)" I unchecked it, and made no  difference. There was also some stuff written in the "Bypass proxy settings for these hosts and domains" I deleated that and nothing different happened. Have also tried some other DNS numbers,  nothing worked yet.
    Any suggestions?

    I still have no idea what was wrong with Safari last week, but I opened it today, and its all working! Hurrah!
    Woohoo! I'm a great fan of things fixing themselves. Fingers crossed in New Zealand for no further problems.

  • "Could not connect to this SMTP server" error box.

    I suspect this is common, but what do I do? I get an error box when I attempt to send outgoing mail from Mail. Connection Doctor tells me under smtp.mac.com:budsteetle "Could not connect to this SMTP server. Check your network connection and that you entered the correct information in the Account preferences." I have made not changes in my account, so this appears to be an Apple problem. I can send mail OK through MobileMe on my old .Mac account. Ideas? Usually, the Outbox empties eventually, so far it has been 1/2 a day.
    thank you...

    Hi Bud, and a warm welcome to the forums!
    I saw this earlier, but hoped a Mail expert would drop by, or at least somebody that liked the dot mc service!
    Might see this thread...
    http://discussions.apple.com/thread.jspa?threadID=1359604
    And if you can interpolate, this Leopard doc...
    http://support.apple.com/kb/TS1307?viewlocale=en_US

  • Solaris 9 server is not connecting to the network

    hi,
    we are working on a Sun Spark v240 ,Solaris 9 sever.
    there was a ip clash between the server and other machine in the network.
    Since then our server is not connecting to the network.
    We disabled the ip on the other machine.
    But still the problem persisits.
    When we do trace route we are not getting any info.
    It doenot even ping the default gateway.
    please help

    1, Could you provide some network layout info, eg: The network or subnet(provide subnet mask if using a subnet) address, The servers address, each other machines address.
    2, Make sure you haven't disabled your hme?(ether) devices.
    3, i know this is an old post, if you fixed the problem please reply your solution as it may help others troubleshoot similar problems.

  • HT1424 IPSec VPN connection brings up login box but will not connect after entering password.  Have tried this on both IPAD and IPhone 4.  Can anyone help?  thanks

    IPSec VPN brings up login box but will not connect after entering password.  Have tried this on both IPAD and IPhone 4.  Can anyone help?

    Uggh, it's so frustrating! I've googled every search phrase I can think of and this seems to be the only thread describing this exact issue. I'm always automatically logged into Facebook on my MBP but just to be sure I logged out and back in and it worked fine.
    I gotta say, I wasn't a fan of the Droid I had preceding this iPhone, and from what I hear the iPhone app for FB is a thousand times better - not that I'd know personally because I can't log in!! - but I could always access my FB account on the droid. Just sayin...

  • TS1398 iPod touch shows router connection but tick box to connect does not appear

    Although it shows the wifi as connected the tick box doesn't appear just the 'spinning circle' showing it is trying to connect.  I've re-set router, network settings, restored ipod and I have other apple devices happily connected.  Model is brand new 4 32GB with latest software.  Now thinking it's a fault.

    Although it shows the wifi as connected the tick box doesn't appear just the 'spinning circle' showing it is trying to connect.  I've re-set router, network settings, restored ipod and I have other apple devices happily connected.  Model is brand new 4 32GB with latest software.  Now thinking it's a fault.

  • IPad 1 is recognized by iTunes running on Windows XP but will not sync (new problem, used to work fine).  The iPad and all its contents displayed but warning box says the iPad is not connected.  Tried soft reboot.  All software versions current.

    iPad 1 connects to iTunes and displays in the left column.  All elements on iPad displayed.  However, it will not sync.  Displays message that the iPad is not connected.  This is a new issue.  Used to work fine.  All iTines and iPad software up to date.  Ran HELP diagnotsic in iTunes with iPad connected - no issues noted.  Attempted soft reboot of iPad.  No help.

    Issue hopefully resolved.  Required Apple store to delete all info from iPad and reinstall operating system.  Had to reload all data, but it seems to be working fine.  Cause unknown. 

  • Mail boxes can not connect to server

    I have been using my mailboxes perfectly fine. But this morning they all could not connect to ther servers. The internet is working and I can go to them using my bowser. I didn't not change any setting so I don't know what's the problems. I tried connection doctor and everything...

    I restarted and it fixed the problem.

  • Laptop will not connect to the internet, cannot get configuration box to pop up

    Cannot get laptop to connect to the internet.  I tried the instructions on the link form Linksys.  I entered 192.168.1.1 in the address window but the configuration window does not pop up. 

    Is the laptop connected to a wireless network? Is it connected to your network name? If it is check the IP address for me. Go to Status of your wireless connection then Details, tell me your IPv4 IP address.
    If the laptop is not connected to any wireless network. Do you have a wired computer or can you attach your laptop to the router, check your IP address. If it's in the range of 192... try if you can go to http://192.168.1.1
    I'll be waiting for your reply.

  • Couldn't see LUNS fpr  Compaq Storage array 1000 solaris box

    Hi All,
    I want to connect Compaq storage Works SAN array to solaris10 Box. I can see array as connected but state as unusable.
    How can i see the luns from the storage on solaris box??
    dmesg output:
    Feb  1 08:29:54 testappl        ndi_devi_online: failed for array-controller: target=11000 lun=0 ffffffff
    Feb  1 08:30:25 testappl fctl: [ID 517869 kern.warning] WARNING: fp(7)::PLOGI succeeded: no skip(2) for D_ID 11000
    Feb  1 08:30:25 testappl genunix: [ID 599346 kern.warning] WARNING: Page83 data not standards compliant COMPAQ   MSA1000          2.38
    Feb  1 08:30:25 testappl scsi: [ID 243001 kern.info] /pci@1d,700000/SUNW,emlxs@2/fp@0,0 (fcp7):
    Feb  1 08:30:25 testappl        ndi_devi_online: failed for array-controller: target=11000 lun=0 ffffffff
    Feb  1 08:47:27 testappl emlxs: [ID 349649 kern.info] [ 5.05F8]emlxs3: NOTICE: 730: Link reset.
    Feb  1 08:47:27 testappl emlxs: [ID 349649 kern.info] [ 5.0337]emlxs3: NOTICE: 710: Link down.
    Feb  1 08:47:30 testappl emlxs: [ID 349649 kern.info] [ 5.054D]emlxs3: NOTICE: 720: Link up. (2Gb, fabric, initiator)
    Feb  1 08:47:30 testappl genunix: [ID 599346 kern.warning] WARNING: Page83 data not standards compliant COMPAQ   MSA1000          2.38
    Feb  1 08:47:30 testappl scsi: [ID 243001 kern.info] /pci@1d,700000/SUNW,emlxs@2/fp@0,0 (fcp7):
    Feb  1 08:47:30 testappl        ndi_devi_online: failed for array-controller: target=11000 lun=0 ffffffff
    cfgadm -al output:
    bash-3.00# cfgadm -al
    Ap_Id                          Type         Receptacle   Occupant     Condition
    c0                             scsi-bus     connected    configured   unknown
    c0::dsk/c0t0d0                 CD-ROM       connected    configured   unknown
    c1                             scsi-bus     connected    configured   unknown
    c1::dsk/c1t0d0                 disk         connected    configured   unknown
    c1::dsk/c1t1d0                 disk         connected    configured   unknown
    c1::dsk/c1t2d0                 disk         connected    configured   unknown
    c2                             fc           connected    unconfigured unknown
    c5                             scsi-bus     connected    unconfigured unknown
    c6                             fc           connected    unconfigured unknown
    c7                             fc-fabric    connected    configured   unknown
    c7::500805f3000186d9           array-ctrl   connected    configured   unusable
    usb0/1                         usb-device   connected    configured   ok
    usb0/2                         unknown      empty        unconfigured ok
    usb1/1                         unknown      empty        unconfigured ok
    usb1/2                         unknown      empty        unconfigured okthanks in advance.

    Looks like the LUN is not configured correctly on the storage array. The kernel can't take the LUN online.
    I have seen this on various boxes, most of the time it was either that the LUN wasn't set online on the SAN box or there is a SCSI reservation on the LUN.
    Can you access the LUN from another host?

  • [Error] Not connected to Oracle...

    I've installed oracle8.1.7 on a Sun Enterprise 450 Solaris box.
    Followed every steps listed in the installation Manual(SGA configuration, etc...)
    i tried to create databaase using dbassist but failed.
    The error I got is "ORA-01034 ORACLE not found" or "Not connected to Oracle".
    Can anyone tell me why?
    what steps to resolve the problems?
    I miss any pre_installaiont steps...???
    Thanks in advance.

    This is a very common error.
    Until you post your script - i don't think we can do any help for you. Or, at least post some relevant information.
    Regards.
    Satyaki De.

  • Duplicate customer environment on our Solaris box

    Hi, I am new to here, and I am a dummy on iAS.
    We got a tape back up of our customer�s testing machine. I would like to set up the �exact� same server on one or our Solaris boxes and run some tests on it.
    After having the corporate computing guys loaded the tape to the box. I hacked through some files in
    /mnt/opt/iPlanet/ias65/slapd-nccias/config
    /mnt/opt/iPlanet/ias65/ias/registry
    replaced customer�s host and domain names by our host and domain names on the LAN.
    Now I can start the LDAP server. But when I tried to start the iAS, it failed and I got the following in the ias.log:
    Connected to LDAP server on xxx-cissun19.abccorp.com port 389
    iPlanet Application Server is running in international mode
    iPlanet Administrative Server
    Version 6.5, Build 20021121
    Copyright (c) 1996-1997 KIVA Software Corporation.
    Copyright (c) 1998-1999 Netscape Communications Corporation.
    Copyright (c) 2000-2001 Sun Microsystems, Inc. Some preexisting portions Copyright (c) 2000 Netscape Communications Corp. All rights reserved.
    Use of this software is governed by the terms of the executed license agreement between you and iPlanet E-Commerce Solutions.
    Am I doing something that is not possible? Am I on the right track? Is there any documentation that walks people through this process?
    You help will be highly appreciated.

    Hi, I am new to here, and I am a dummy on iAS.
    We got a tape back up of our customer�s testing machine. I would like to set up the �exact� same server on one or our Solaris boxes and run some tests on it.
    After having the corporate computing guys loaded the tape to the box. I hacked through some files in
    /mnt/opt/iPlanet/ias65/slapd-nccias/config
    /mnt/opt/iPlanet/ias65/ias/registry
    replaced customer�s host and domain names by our host and domain names on the LAN.
    Now I can start the LDAP server. But when I tried to start the iAS, it failed and I got the following in the ias.log:
    Connected to LDAP server on xxx-cissun19.abccorp.com port 389
    iPlanet Application Server is running in international mode
    iPlanet Administrative Server
    Version 6.5, Build 20021121
    Copyright (c) 1996-1997 KIVA Software Corporation.
    Copyright (c) 1998-1999 Netscape Communications Corporation.
    Copyright (c) 2000-2001 Sun Microsystems, Inc. Some preexisting portions Copyright (c) 2000 Netscape Communications Corp. All rights reserved.
    Use of this software is governed by the terms of the executed license agreement between you and iPlanet E-Commerce Solutions.
    Am I doing something that is not possible? Am I on the right track? Is there any documentation that walks people through this process?
    You help will be highly appreciated.

Maybe you are looking for