Winter time issue w. iCal on web

Next week all my iCal entries are off by one hour when they are published on my .Me account (they are one hour late and do not match what I see on my laptop). We switch from summer to winter time this weekend in Sweden, so I am sure it has something to do with this, but I do not know how to correct it. The Cal is ok the week after next, so it is really odd!

Coupled to the use if iCal Publish (a small extra program). No longer a problem when I stopped using this extra program.

Similar Messages

Issue while opening BI4 webi report instance using CMC on IE8 browser

Hi,
Having issue while opening BI4 webi report instance using CMC on IE8 browser.
Steps to reproduce the error:
1. Login to CMC
2. View Webi History.
3. Open successful instance (For the 1st or 2nd time reports are opening up, from the 3rd time it just freeze the session)
4. After it get freeze we need to close the IE using Task Manager.
Can any one please suggest a resolution for this issue.
Thanks,
Ganesh.M

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

Custom Timer Job to execute WCF web service error - Could not find default endpoint element that references contract

Hi,
I am currently creating custom timer job to call WCF web service to perform nighty job to update employee document library metadata. If I update regular list/library items it updates correctly on a specified interval basis. However when I try to integrate
the WCF client, it throws error shown below :
Could not find default endpoint element that references contract EmployeeServiceReference.
EmployeeServiceClient in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.
I followed exact instructions Andrew Connell has provided but included my logic in execute()
public
override
void Execute(Guid
targetInstanceId)
var empClient =
new
'ServiceReference.EmployeeServiceClient();
var employee = empClient.EmployeesMethod();
I have tried all approaches to manually adding app.config settings in sharepoing web.config but still it throws the error mentioned. It seems that application config and sharepoint site config binding issue still exist and cannot be resolved.
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding
name="BasicHttpBinding_EmployeeService"
/>
</basicHttpBinding>
<netTcpBinding>
<binding
name="CustomBinding_EmployeeService">
<security>
<transport
protectionLevel="None"
/>
</security>
</binding>
</netTcpBinding>
<wsHttpBinding>
<binding
name="WSHttpBinding_EmployeeService">
<security
mode="None"
/>
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint
address="http://services.mycomp.com/EmployeeService.svc"
binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_EmployeeService"
contract="EmployeeServiceReference.EmployeeService"
name="WSHttpBinding_EmployeeService"
/>
<endpoint
address="http://services.mycomp.com/EmployeeService.svc/soap"
binding="basicHttpBinding"
bindingConfiguration="BasicHttpBinding_EmployeeService"
contract="EmployeeServiceReference.EmployeeService"
name="BasicHttpBinding_EmployeeService"
/>
<endpoint
address="net.tcp://crmapp.mycomp.com:5050/EmployeeService.svc/tcp"
binding="netTcpBinding"
bindingConfiguration="CustomBinding_EmployeeService"
contract="EmployeeServiceReference.EmployeeService"
name="CustomBinding_EmployeeService">
<identity>
<userPrincipalName
value="[email protected]"
/>
</identity>
</endpoint>
</client>
</system.serviceModel>
Will you please help resolving this issue?

Hi,
You can use any of the three approaches:-
1) Access web application's web.config programmatically in Execute() method.
http://praveenkasireddy.wordpress.com/2012/12/14/access-web-application-configuration-values-in-timer-job-sharepoint/
2) Store the configuration in xml and upload it to SharePoint document library then read from there
http://www.sharepointdynamics.net/2011/08/using-an-xml-settings-file-to-store-values-for-your-sharepoint-projects/
3) Programmatically configure a WCF endpoint.
http://msdn.microsoft.com/en-us/library/ff647110.aspx
Regards, Shruti

Entering description of event into iCal, pasted too much text into event, responded with The server responded with an error. Preferences is greyed out, and window pop up comes up every time I open iCal and doesn't go away. Force quit, still opens. Help?

While pasting event description into iCal, accidently pasted too much text, causing "The server responded with an error" pop up. This pop us includes the event description, but because of the mass amount of text, the window shoots off the screen to the bottom, so if there was an exit red "x" available, it isn't visible or accessible. The iCal>preferences is greyed out and I have force quit and it pops up each time I use iCal. Is this even fixable?

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Every time I click on a web page an advertisement or MAC Keeper page opens up. I have pop-up blocker on. How do I make this stop?

Every time I click on a web page an advertisement or MAC Keeper page opens up. I have pop-up blocker on. How do I make this stop?

There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Time the response of our web application (filter does not do the work!)

Hi All,
Hope I can find some help.
Currently I am facing an issue for which I find hard to find a solution.
We are trying to log the time it takes for our web application (in Tomcat) to deliver a page back to the browser.
I decided to use a Filter after having a look on the net, however I believe this approach to be wrong.
I debugged and the doFilter() method is called twice, because the request and the response go through it.
So how can I possibly set the startTime the first time and the stopTime the second time to measure the whole duration?
It is worth mentioning that setting an attribute at the end of the method does not to work.
It seems that when doFilter is called the second time, the req is the object passed in doFilter first time, that is to say, before we set the attribute.
Any idea how to log the real time for the response. Many thanks in advance
public final class TimerFilter implements Filter {
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain)
        throws IOException, ServletException
     HttpServletRequest httpReq = (HttpServletRequest) req;
     if(httpReq.getAttribute("ALREADY_FILTERED_ONCE") == null){
             this.startTime = System.currentTimeMillis();
     chain.doFilter(request, response);
     if(httpReq.getAttribute("ALREADY_FILTERED_ONCE") != null){
             this.stopTime = System.currentTimeMillis();
          System.out.println("Time to execute request: " +(stopTime - startTime)+
            " milliseconds");
     httReq.setAttribute("ALREADY_FILTERED_ONCE", "");
    }

I don't know, but your description seems to be based on some assumptions in stead of facts.
I debugged and the doFilter() method is called twice, because the request and the response go through it.That seems highly unlikely to me. I can believe that the filter is executed twice, but not because it is for a separate request and response. I would say the filter is executed twice for other reasons.
It seems that when doFilter is called the second time, the req is the object passed in doFilter first time, that is to say, before we set the attribute.And that proves my previous statement, as this would indicate that a whole new request object is created for when the response would be passed through the filter, which is nonsense. I would be more inclined to think that two different requests are happening here, for whatever reason. Are you sure nowhere a redirect is happening?

Every time I click something on web pages, like a link or a search bar, I get a poEvery time I click something on wr a search bar, I get a pop-up. It's usually a semi-related pop-up, like on Apple websites, I get a lot of MacKeeper pop-ups.

Every time I click something on web pages, like a link or a search bar, I get a pop-up. It's usually a semi-related pop-up, like on Apple websites, I get a lot of MacKeeper pop-ups. I let my younger brother use my laptop yesterday, and now this is happening. I think he might have downloaded something, but I don't know what it is called or anything so I don't know how to delete it.
I have a Macbook pro.
Thank you!

Your brother may have downloaded and installed something known as "adware." To see if that's the case, visit thomas_r.'s The Safe Mac website and look at the Adware Removal Guide page. You may also be able to use his Adware Removal Tool to get rid of the junk.
Good luck,
Clinton

Issue while adding WCF Web Service reference using Oracle APEX

Hi,
We have an issue with creating the Web Service Reference for the WCF web service:
http://dev.virtualearth.net/webservices/v1/metadata/geocodeservice/GeocodeService1.wsdl
The APEX gives the following error
“The WSDL document could not be understood by the rendering engine. Click Create Web Service Reference Manually to continue creating a reference for this service.”
Can you please tell me if creating the Web Service Reference for WCF is supported on the “out of the box“ APEX?
Environment information:
APEX 4.0.2.00.07
Database 11.2.0.3
Please note that we have tried it in APEX 4.1.1 from apex.oracle.com and the error there is different, it can connect even to ASMX wsdl.
Thank you.

I don't think that is it specific to just .NET web services. I have tried with a web service created with TIBCO BusinessWorks (Middleware product) that did not work either. The wsdl validated correctly in soapUI, so I think it just must be the implementation of the parser which is looking for some specific format.
When in doubt, go with either the manual reference or with pl/sql using one of the api's.

Call ESS FPM CATS Working time application from non FPM web dynpro application on click of button

Hi,
My requirement is to launch ESS Working time application HRESS_AC_CATS_1 from custom web dynpro application.
ESS CATS working time application is configured in LPD_CUST launchpad.
I tried using method cl_hr_navigation_services=>navigate in my custom web dynpro but it did not work.
Regards,
Ibrahim

In case you want to use Launchpad, you can use ABAP class CL_APB_LAUNCHPAD_API. If choose not to use Launchpad, you can use method CONSTRUCT_WD_URL of ABAP class CL_WD_UTILITIES to generate the URL. Specify Web Dynpro application and Web Dynpro Configuration as parameter. Finally create an external window using method CREATE_EXTERNAL_WINDOW that points to that URL.

Does Time Machine backup iCal?

I had a problem with some lost todo items the other day and checked to see if I could see a backup calendar as a quick way to solve the problem. If I am on address book and enter time machine, I see backups of my old address books and if I am on mail, I get all my old mail messages on the screen (though the todo item is grayed out), but if I am on iCal, I simply get the Finder window.
Does Time Machine backup iCal or do I need to do a manual backup and then let Time Machine backup that file from finder?

Since reading some of the first messages, I have been backing up my calendar each week and putting the backup file in my documents folder. I know that file is backed up, so I assume in case of a major problem, I could pull it from Time Machine and restore the data.
Out of curiosity, though, I explored the folders in my library/calendar path and found a number of folders, each containing a file that was dated either today or within the last few days. I assume each folder is for a different calendar and that in case of total disaster, I could restore these from Time Machine.
My question at this point: When I export the calendar from iCal, if the All Calendars option is checked, am I safe in concluding each of the separate calendars would be there? If I accidentally had one calendar highlighted, would only that calendar be backed up?

Time issue- urgnt

HI Expert !
I m using this code .
LTIME TYPE SY-UZEIT
T1 TYPE SY-UZEIT VALUE 030000,
T2 TYPE SY-UZEIT VALUE 050000,
BUT WHEN I M USING T1 AND T2 in loop ( if statement ),ITS value r
T1 = 082000.
t2 = 131100 .
if t1(6) t2(6 )
ltime (6 ).
then ok . but in this i wont be able to make comparison in if statement
how i can resolve this time issue
i dont want to include timings between 3.00 a.m and 5.00 ,
for this i have used this code but its not updating data for any employee , is this code correct or not.
OPEN DATASET PA_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET PA_FILE INTO REC.
CLEAR WA_PUNCHES.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
WRITE: / REC.
if NOT ( WA_SCORE-LTIME GE T1 AND WA_SCORE-LTIME LE T2 ) .
AND
***( WA_SCORE-TERID NE TR3 AND
***WA_SCORE-TERID NE TR4 AND
***WA_SCORE-TERID NE TR5 AND
***WA_SCORE-TERID NE TR6 AND
***WA_SCORE-TERID NE TR7 AND
***WA_SCORE-TERID NE TR8 ) .
WA_SCORE-PERNR = REC+0(8) .
WA_SCORE-LDATE = REC+9(8) .
WA_SCORE-LTIME = REC+18(6) .
WA_SCORE-CANID = REC+25(8) .
WA_SCORE-TERID = REC+34(4) .
APPEND WA_SCORE TO IT_SCORE.
ELSE .
EXIT .
ADD 1 TO COUNT.
ENDIF .
ENDDO.
plz help me . its very imp. program .
thanks

Hi,
Pass values in quotes
T1 TYPE SY-UZEIT VALUE '030000',
T2 TYPE SY-UZEIT VALUE '050000',
Can you please check once again after making this change in debug mode, values of T1, T2 and LTIME.
ashish

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

Go step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
3. Deselect Proxies if selected.
    System Preference > Network > Advanced > Proxies Tab
    Under "Select Protocol", uncheck any box if selected.
    Click "OK" then "Apply”.

Time issue seems odd to me

I put a secondary domain and po at a remote location - running 8.03 on Sles/Oes and moved all of the "local" users to that po.
while everything seems to run ok we have a weird time issue.
Mail into and out of the new mailboxes shows a three and a half hour time difference both in the date column in the groupwise client and in the printed header of the email.
The odd thing is that if I go to the properties of the email - the Creation date and the File date and time are both correct.
I can't see any time issues with the servers (primary or secondary) and especially something that would be 3:30 minutes off
there is a timezone difference between the pri and sec but that's just 1 hour.
Any thoughts?
As a workaround I have had my users add the creation column to see when they actually received the email as our clients have time critical projects.
Thanks
Dennis

Danita,
Thanks for the reply - Oh how I wish it were that easy - I've checked and double checked the PO object and the domain object - both say US eastern time.
If I send email from a mailbox on the secondary to the primary - everything is correct (a 1 hour time difference - Eastern to Central)
If I send mail from a mailbox on the primary to the secondary - it shows up right away, but says 3:30 minutes later than it should (in Date/Time, but not in Created)
If I send email from a mailbox on the secondary to a GMail account - the header shows the 3:30 offset, but the properties of the mail shows correctly.
I would be happy to send email from that po to anyone that wants to see for themselves.
Other than the PO Object and the DOM object - Where should I be looking for a time difference
and how would it be getting UTC minus 30 minutes - - Is there a special timezone out there for Hy Brasil?
The workstations all get their time settings from "time.windows.com" the windows default.
Thanks for looking into this - I just hope that I can get it figured out because as small of an issue that I think it is (they get their email, it just looks like it gets read before they officially receive it)
but it seems that this office uses the received time to track how long it takes them to do their work.
Dennis

Real time issue

Hi all,
Can any body plz send me some FICO real time issue on [email protected]
and plz tell me hw shld I prepare for interview
Thanks & Regards
Vaibhav

Hi Balraj,
In the normal practice, developers will try to find the similer infocube (as per the requirement) in the Business content. But always you will not be lucky to find such infocube in Business content. You need to create at your own to suite the business requirements. Regarding the characteristcs & key figure, it 's again depend on the requirements. Calculated object can be assign as key figure like. Sales qty, revenue & net sales etc. where as Dimesion (characteritcs) will be purely depends on the reporting point of view. Like Customer, Material & Sales Document type etc.
Hope this will help you !
Thanks,
Sanjiv

Execution Time Issue

Help Please!!!
I've been searching for an execution time issue in our application for a while now. Here is some background on the application:
Collects analog data from a cDAQ chassis with a 9205 at 5kHz
Data is collected in 100ms chunks
Some of the data is saved directly to a TDMS file while the rest is averaged for a single data point. That single data point is saved to disk in a text file every 200ms.
Problem: During operation, the VI that writes the data to the text file will periodically take many hundreds of milliseconds to execute. Normal operation execution times are on the order of 1ms or less. This issue will happen randomly during operation. It's usually many seconds between times that this occurs and it doesn't seem to have any pattern to when the event happens.
Attached is a screenshot of the VI in question. The timing check labeled "A" is the one that will show the troubling execution time. All the other timing checks show 0ms every time this issue occurs. I simply can't see what else is holding this thing up. The only unchecked subVI is the "append error call chain" call. I've gone through the heirarchy of that VI and ensured that everything is set for reentrant execution. I will check that too soon, but I really don't expect to find anything.
Where else can I look for where the time went? It doesn't seem to make sense.
Thanks for reading!
Tim
Attachments:
Screen Shot 2013-09-06 at 9.32.46 AM.png ‏87 KB

You should probably increase how much data you write with a single Write to Text File. Move the Write to Text File out of the FOR loop. Just have the data to be written autoindex to create an array of strings. The Write to Text File will accept the array of strings directly, writing a single line for each element in the arry.
Another idea I am having is to use another loop (yes another queue as well) for the writing of the file. But you put the Dequeue Element inside of another WHILE loop. On the first iteration of this inside loop, set the timeout to something normal or -1 for wait forever. Any further iteration should have a timeout of 0. You do this with a shift register. Autoindex the read strings out of the loop. This array goes straight into the Write to Text File. This way you can quickly catch up when your file write takes a long time.
NOTE: This is just a very quick example I put together. It is far from a complete idea, but it shows the general idea I was having with reading the queue.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Write all data on queue.png ‏16 KB

Winter time issue w. iCal on web

Similar Messages

Maybe you are looking for