Wintv-hvr850

IM having problems. I'm triing to stream video from my hard drive..I have wintv-hvr850. In encoder i see my devise in the drop menu on encoder but both screens are blank. i think it has something to do with defualt setting on tv tuner like you said to other guy..something about using s cables..but im not even triing to use tv right now..just triing to stream fron hard drive..Is it possible that even though i am playing the video i want to watch on the tv tuner that the encoder is triing to stream a live show from the cable connection instead of the file im playing on the tv tuner?

QUESTION..is it possible to just convert my video's into a flash
format? Then would i be able to just stream them with the Adobe
encoder? I see the sample tab that lets me browse my computer for
files? Some one told me about Avermedia Hybred max tv tuner that i
just went and bought, but still having same problems. This one said it
works with windows 200 but i have a feeling my processor isnt fast
enough. Think i have old pentium 2 processor on my sony laptop, not
the pentium 4 it says system requires so another wasted $80 i guess.
damn this is getting expensive triing to learn this.
What would be my best bet on triing to find a way to do simple
streaming to justin tv/ustream. I guess my comuters are kinda old and
out of date with the speeds so i'm having a hard time finding
compatible stuff to work with the machines i got.My compaq runs off an
AMD processor and my laptop XP 2000 PRO...I dont need the best stuff
just something that works that i can have fun playing around with. I
got some old surf movies i want to stream on justin tv or ustream. I
tries that seetoo program but it has no controls to try and limit the
lagging and other problems and freezes up most the time, problably
because of my internet connection is only a 277kbps up speed

Similar Messages

Hauppauge WinTV HVR 850 - cannot load module

Hi,
I recently got TV and thought i'd give a try to a tuner card and record some stuff on my PC.
I read on the net, and the cheapest, yet linux-ok was the Hauppauge WinTV HVR 850, so i got that one.
I read alot on the net about it to make it work. I tried pretty much everything i could, but now i'm giving up.
I saw it needs the au0828 driver, as you can see in /usr/src/linux-2.6.39-jni/drivers/media/video/au0828/au0828-cards.c
[AU0828_BOARD_HAUPPAUGE_HVR850] = {
.name = "Hauppauge HVR850",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.i2c_clk_divider = AU0828_I2C_CLK_30KHZ,
.input = {
However, when booting, it seems to use cx231xx/cx25840 and those seem to crash miserably.
here is what i can see in dmesg :
[ 5.640072] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5
[ 5.640138] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[ 5.645093] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input6
[ 5.645400] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[ 5.650240] IR RC6 protocol handler initialized
[ 5.651136] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2
[ 5.651155] usbcore: registered new interface driver usbhid
[ 5.651157] usbhid: USB HID core driver
[ 5.651196] cx231xx v4l2 driver loaded.
[ 5.651345] cx231xx #0: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:b140) with 6 interfaces
[ 5.651350] cx231xx #0: registering interface 1
[ 5.651503] cx231xx #0: Identified as Hauppauge EXETER (card=8)
[ 5.667321] IR JVC protocol handler initialized
[ 5.668346] IR Sony protocol handler initialized
[ 5.670263] lirc_dev: IR Remote Control driver registered, major 249
[ 5.674600] IR LIRC bridge handler initialized
[ 5.818002] cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
[ 5.830132] cx25840 1-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0)
[ 5.830759] BUG: unable to handle kernel paging request at 00000001fffffc51
[ 5.830879] IP: [<ffffffffa120e19c>] cx25840_s_ctrl+0x1c/0x110 [cx25840]
[ 5.830960] PGD 221039067 PUD 0
[ 5.831066] Oops: 0000 [#1] PREEMPT SMP
[ 5.831202] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/i2c-1/1-0044/uevent
[ 5.831260] CPU 1
[ 5.831293] Modules linked in: cx25840 ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder joydev ir_rc6_decoder cx231xx(+) ir_rc5_decoder cx2341x usbhid ir_nec_decoder rc_core hid au0828 dvb_core videobuf_vmalloc videobuf_core tveeprom v4l2_common videodev media v4l2_compat_ioctl32 fuse nvidia(P) firewire_ohci firewire_core serio_raw evdev crc_itu_t sg snd_hda_codec_realtek uhci_hcd snd_hda_intel snd_hda_codec snd_hwdep ehci_hcd snd_pcm snd_timer snd psmouse r8169 iTCO_wdt pcspkr soundcore i2c_i801 snd_page_alloc usbcore iTCO_vendor_support intel_agp intel_gtt mii asus_atk0110 processor button i2c_core ext4 mbcache jbd2 crc16 sr_mod sd_mod cdrom pata_acpi ata_piix ahci pata_jmicron libahci libata scsi_mod
[ 5.833702]
[ 5.833744] Pid: 484, comm: modprobe Tainted: P 2.6.39-ARCH #1 System manufacturer System Product Name/P5Q3
[ 5.833897] RIP: 0010:[<ffffffffa120e19c>] [<ffffffffa120e19c>] cx25840_s_ctrl+0x1c/0x110 [cx25840]
[ 5.833987] RSP: 0018:ffff8802210977d8 EFLAGS: 00010286
[ 5.834033] RAX: 0000000200000001 RBX: ffff880221db5500 RCX: 0000000000003b3a
[ 5.834074] RDX: ffff880221160c78 RSI: 2222222222222222 RDI: ffff880221db5500
[ 5.834074] RBP: ffff8802210977e8 R08: 2222222222222222 R09: 2222222222222222
[ 5.834074] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880221db5500
[ 5.834074] R13: ffff880221c904d0 R14: ffff880221c904a0 R15: 0000000000000001
[ 5.834074] FS: 00007ff82cacb700(0000) GS:ffff88022fc80000(0000) knlGS:0000000000000000
[ 5.834074] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5.834074] CR2: 00000001fffffc51 CR3: 000000022237c000 CR4: 00000000000406e0
[ 5.834074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5.834074] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 5.834074] Process modprobe (pid: 484, threadinfo ffff880221096000, task ffff880221985bd0)
[ 5.834074] Stack:
[ 5.834074] ffff880221db5500 ffff880221db5500 ffff880221097838 ffffffffa028a9f2
[ 5.834074] 0000028f21097838 0000000000000000 ffffffffa028dcd7 ffff880221c90000
[ 5.834074] ffff880221c35400 ffff880221c904a0 0000000000005a3e 0000000000005a3b
[ 5.834074] Call Trace:
[ 5.834074] [<ffffffffa028a9f2>] v4l2_ctrl_handler_setup+0x102/0x130 [videodev]
[ 5.834074] [<ffffffffa120fcc3>] cx25840_probe+0x4b3/0x830 [cx25840]
[ 5.834074] [<ffffffff81045b53>] ? __wake_up+0x53/0x70
[ 5.834074] [<ffffffffa120f810>] ? common_s_io_pin_config+0x2d0/0x2d0 [cx25840]
[ 5.834074] [<ffffffffa00f5531>] i2c_device_probe+0xb1/0x110 [i2c_core]
[ 5.834074] [<ffffffff811bfe43>] ? sysfs_create_link+0x13/0x20
[ 5.834074] [<ffffffff812dfd9e>] driver_probe_device+0x7e/0x1b0
[ 5.834074] [<ffffffff812dffd3>] __device_attach+0x53/0x60
[ 5.834074] [<ffffffff812dff80>] ? __driver_attach+0xb0/0xb0
[ 5.834074] [<ffffffff812de9ec>] bus_for_each_drv+0x5c/0x90
[ 5.834074] [<ffffffff812dfccf>] device_attach+0x8f/0xb0
[ 5.834074] [<ffffffff812df41d>] bus_probe_device+0x2d/0x50
[ 5.834074] [<ffffffff812dd4f8>] device_add+0x5a8/0x690
[ 5.834074] [<ffffffff812e97e6>] ? pm_runtime_init+0xd6/0xe0
[ 5.834074] [<ffffffff812dd5fe>] device_register+0x1e/0x30
[ 5.834074] [<ffffffffa00f5ea0>] i2c_new_device+0x130/0x1b0 [i2c_core]
[ 5.834074] [<ffffffffa010079b>] v4l2_i2c_new_subdev_board+0x13b/0x200 [v4l2_common]
[ 5.834074] [<ffffffffa01008d5>] v4l2_i2c_new_subdev+0x75/0xa0 [v4l2_common]
[ 5.834074] [<ffffffffa10fa2d2>] cx231xx_card_setup+0x222/0x300 [cx231xx]
[ 5.834074] [<ffffffffa10fe14d>] ? cx231xx_enable_i2c_port_3+0x4d/0xc0 [cx231xx]
[ 5.834074] [<ffffffffa10fd686>] ? cx231xx_dev_init+0x196/0x300 [cx231xx]
[ 5.834074] [<ffffffffa10faa80>] cx231xx_usb_probe+0x430/0xc10 [cx231xx]
[ 5.834074] [<ffffffffa0204293>] usb_probe_interface+0xd3/0x1e0 [usbcore]
[ 5.834074] [<ffffffff812dfd9e>] driver_probe_device+0x7e/0x1b0
[ 5.834074] [<ffffffff812dff7b>] __driver_attach+0xab/0xb0
[ 5.834074] [<ffffffff812dfed0>] ? driver_probe_device+0x1b0/0x1b0
[ 5.834074] [<ffffffff812dfed0>] ? driver_probe_device+0x1b0/0x1b0
[ 5.834074] [<ffffffff812ded6c>] bus_for_each_dev+0x5c/0x90
[ 5.834074] [<ffffffff812dfa3e>] driver_attach+0x1e/0x20
[ 5.834074] [<ffffffff812df690>] bus_add_driver+0x1a0/0x270
[ 5.834074] [<ffffffff812e0516>] driver_register+0x76/0x140
[ 5.834074] [<ffffffff813def5c>] ? printk+0x41/0x43
[ 5.834074] [<ffffffffa02030fd>] usb_register_driver+0x9d/0x190 [usbcore]
[ 5.834074] [<ffffffffa111d000>] ? 0xffffffffa111cfff
[ 5.834074] [<ffffffffa111d02f>] cx231xx_module_init+0x2f/0x4c [cx231xx]
[ 5.834074] [<ffffffff81002040>] do_one_initcall+0x40/0x180
[ 5.834074] [<ffffffff8109b033>] sys_init_module+0xb3/0x200
[ 5.834074] [<ffffffff813e8f42>] system_call_fastpath+0x16/0x1b
[ 5.834074] Code: ff ff ff 31 d2 5b 41 5c 89 d0 5d c3 0f 1f 00 55 48 89 e5 48 83 ec 10 48 89 5d f0 4c 89 65 f8 0f 1f 44 00 00 48 8b 47 20 48 89 fb <4c> 8b a0 50 fc ff ff 8b 47 40 3d 01 09 98 00 0f 84 8f 00 00 00
[ 5.834074] RIP [<ffffffffa120e19c>] cx25840_s_ctrl+0x1c/0x110 [cx25840]
[ 5.834074] RSP <ffff8802210977d8>
[ 5.834074] CR2: 00000001fffffc51
[ 5.839321] ---[ end trace 2c59460c4f6efc4d ]---
[ 10.966677] usb 2-3: new high speed USB device number 4 using ehci_hcd
Here is some more info (as of today, all my packages are up to date) :
└% uname -a
Linux jni-desktop 2.6.39-ARCH #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011 x86_64 Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz GenuineIntel GNU/Linux
└% cat /etc/rc.conf | grep "^MODULES"
MODULES=(!pcspkr nvidia vboxdrv vboxnetflt fuse au0828)
└% cat /etc/mkinitcpio.conf | grep "^HOOKS"
HOOKS="base udev autodetect pata usb scsi sata filesystems"
I don't know what else to add here. If you need more info, i'll gladly provide it.
Thanks in advance for looking into this. Hardware and drivers matters aren't my speciality! lol i'm sure it's real stupid...
Jni
Last edited by jni (2011-07-05 10:49:09)

Here are some more info. I am still totally lost in this though.
I managed to get rid of the driver issue posted above.
I plugged in analogic cable and tvtime would show some images, but with no sound (despite me trying every possible channel my alsa has to offer).
I then tried plugging in the cable directly from the wall, without using the decoder... image went black and i couldn't see a thing (as i thought).
However, now that i went back to my original setup (simply plug in, plug out and plug back in... simple as that), i no longer have the picture!
Here are some verbose output from tvtime and xawtv. If someone can understand something out of that, help would be greatly appreciated!
tvtime:
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/jni/.tvtime/tvtime.xml
cpuinfo: CPU Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz, family 6, model 7, stepping 10.
cpuinfo: CPU measured at 2833.011MHz.
xcommon: Display :0, vendor The X.Org Foundation, vendor release 11002000
xfullscreen: Using XINERAMA for dual-head information.
xfullscreen: Pixels are square.
xfullscreen: Number of displays is 2.
xfullscreen: Head 0 at 0,0 with size 1600x900.
xfullscreen: Head 1 at 1600,0 with size 1600x900.
xcommon: Have XTest, will use it to ping the screensaver.
xcommon: Pixel aspect ratio 1:1.
xcommon: Pixel aspect ratio 1:1.
xcommon: Window manager is Openbox and is EWMH compliant.
xcommon: Using EWMH state fullscreen property.
xcommon: Using EWMH state above property.
xcommon: Using EWMH state below property.
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 768x576 window inside 768x576 space.
xvoutput: Using XVIDEO adaptor 310: NV17 Video Texture.
speedycode: Using MMXEXT optimized functions.
station: Reading stationlist from /home/jni/.tvtime/stationlist.xml
videoinput: Using video4linux2 driver 'cx231xx', card 'Hauppauge EXETER' (bus usb-0000:00:1d.7-4).
videoinput: Version is 1, capabilities 5030011.
videoinput: Maximum input width: 720 pixels.
tvtime: Sampling input at 720 pixels per scanline.
videoinput: Tuner present, but our request to change to
videoinput: frequency 61250 failed with this error: Protocol error.
videoinput: Please file a bug report at http://tvtime.net/
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 768x576 window inside 768x576 space.
xawtv gives alot more, so here it goes : http://pastebin.com/0C0LfJbW
Thanks again,
Jni

Hauppauge WinTV-HVR 95Q TV TUNER not working with windows 8.1 HP TouchSmart 15 Notebook PC

I've updated all drivers I can find from the manufracturer. Are there any other HP drivers I need? This worked fine on Windows 7 without having to update to a 'Pro with Media Center' edition. I've updated to Windows 8.1 Pro with Media Center. Another comsumer had their question answered here: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/TV-TUNER-not-working-with-w...
Was going to ask if there was a driver for the Hauppague tuner there but it wouldn't let me post a question asking if there was one of those drivers for the Hauppauge WinTV-HVR 950Q.

I updated all drivers to their latest versoins before beginning. Waiting on response from vendor.

Wintv v6 application software for wintv-hvr-1800 tv tuner card

I have recently purchased HP pavilion m8307c desktop pc in 2nd hand condition & with out Hard Disk. I have istalled fresh Hard disk in it. However, Huappague TV Tuner Card wintv-HVR-1800 is installed in it. I have downloaded software from card manufacturer web site. But during Installation it ask for valid cd of wintv v6 or highier. May hp provide me original software of the above mention card in iso formate or CD if possible?

kpw786 wrote:
I have recently purchased HP pavilion m8307c desktop pc in 2nd hand condition & with out Hard Disk. I have istalled fresh Hard disk in it. However, Huappague TV Tuner Card wintv-HVR-1800 is installed in it. I have downloaded software from card manufacturer web site. But during Installation it ask for valid cd of wintv v6 or highier. May hp provide me original software of the above mention card in iso formate or CD if possible?
Hi,
Have a look here:
http://www.hauppauge.com/site/support/support_pvrusb2.html
A valid WinTV application CDROM will be needed to install this WinTV v6 version. Any WinTV-NOVA version 4x, WinTV-PVR, WinTV version 6 or WinTV v7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to this WinTV v6 version, you can purchase a new CD on the Hauppauge webstore.
I don't think HP will provide anything as you said that the desktop is a second hand and the CD should have been provided by the original owner. In case that you don't want to spend much money there is always some torrent servers where the WinTV app CD can be downloaded from.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

WinTv Tuner Help

My HP Pavilion has a WinTv-1260 card in it. The card seems to work fine except I cannot capture video or audio from the front ports of the PC. I can capture it from the ports on the card itself in the back. I suspect that HP may have done something wrong with the wires that lead to the front ports. Any advice on troubleshooting.
HP chat was no help at all. PC is still under warrantee (this feature never worked)

Chris, welcome to the forum.
When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of the them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Wintv 7 930 c not working with FME 3.2 Sound problems :

Hi Guys my first post here, after 3 days with struggling i gave up,and come here for your expert tips.
I bought a wintv 7 930 c hd tv card,working fine on my computer,but when i enter FMLE 3.2 and click start i get :
"Unknown Error Occurred. Device may be already in use or not working."
I disabled stereo mix in my sound setting in recording and have only a option to use my hauppauge tv card as line in for sound, but thats impossible for me, and now FMLE 3.2 also freezes a lot and not responding, same is happening when i try using normal stream with manycams and a videofile,no sound ,but good stream, so its the sound problem i cant fix at all here .
Any good tips would be very appreciate, heck i would even paypal you 20 bucks if you can help me with this .
Thanks.

Hello,thanks for your help, yes i understand that by now, i called support.
So what do you suggest i do,so i can stream from my computer true my tv card and out,is there a 3 part i can use who handle this then use FMLE ?

Will eyetv v 7 drive wintv 950q tv tuner on Mac?

I have a mini 2012, I also have wintv 950q.,,will eyetv drive this devise on my quad mini?

Only if the manufacturer has drivers for the Mac. What does the manufacturer's support site say?

Hauppuage WinTV...I give up.

I really liked my WinTV PCI card and its served me well. I LIKE watching tv in a window while I'm surfing and doing stuff on the computer.
Since upgrading to P4 2.4 with MSI-645 combo mboard my WinTV just won't play ball (freeze and crash) so I'm ditching it and getting something else that will hopefully work. I know its a well known and documented compatibility issue but I've tried everything to get it working properly. Alas, no joy.
Can people out there recommend a TV tuner card that WILL work properly with my current setup?
MSI TV@nywhere is currently top of the list since its made by MSI it should work with their own motherboard. I don't care about anything else. I just want to watch tv in a window thats always on top.
Then there's lifeview FlyTV USB2.0 but its a new product and I'll have to wait till it gets in the shops here. (Melbourne, Australia)
I was also thinking of a USB option but I really do prefer a PCI tuner. What do people think about going to a USB tv tuner? Does it utilise more CPU time and slow things down?
Any help, recommendations and product condemnation highly appreciated! :-)
http://www.netspace.net.au/~nguyen/

Oh BTW my setup...
P4 2.4Gzh
MSI 645 combo (ms6737) motherboard
1gb PC2700 ram
Creative SB Live
Matrox G400
Hauppuage WinTV PCI (sadly missed)
Win98SE

IMac and Hauppauge WinTV-HVR900 and eyeTV2

Dear all,
I'm from Singapore and this is my virgin post.
I bought a 24" iMac recently... I connect it to Hauppauge WinTV-HVR900 (a windows product) through USB2 and install eyeTV2... and BINGO! I can watch TV on my iMac in mac OS (able to receive both digital and analogue signals).
Works great, in fact smooth as butter. The resolution is GOOD even at full screen mode.
eyeTV2 integrates with FrontRow and compatible with Apple Remote. I'm able to switch channels or to view program listing in full screen mode from a distance from my iMac using the Apple Remote, just like watching normal TV.
A good alternative to Miglia and Elgato which is very expensive here.
some pics to show
http://img4.picsplace.to/img4/26/Picture_1.jpg

Wow, thanks for that, I might consider getting that! :]

Creative Sound Blaster Audigy 2 ZS With WinTV Expr

Hi,
I am using a Creative Sound Blaster Audigy 2 ZS sound card, and I recently purchased a Hauppauge WinTV Express card, I have installed the card with no problems, but it says I have to connect a wire from the Line Out port on the WinTV card into the line In port on my sound card. I cannot find a line in port onm the back of my sound card so I am getting so sound from WinTV. Can anyone please tell me how to set it up correctly?
Thanks for your help,
MJJOS.

The Line In jack is the second jack from the Digital Out jack. If you have problem locating those jack, you can checkup the user guide too.
Jason

Hauppauge WinTV USB 2

i've plugged my Hauppauge WinTV USB 2 and dmesg tells me this:
Linux video capture interface: v2.00
em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (2040:4200): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 1024
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: AC97 command still being executed: not handled properly!
tuner 4-0043: chip found @ 0x86 (em28xx #0)
tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 4-0043: type set to tda9887
tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 4-0043: type set to tda9887
tuner 4-0063: chip found @ 0xc6 (em28xx #0)
tuner-simple 4-0063: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
tuner 4-0063: type set to Philips NTSC MK3 (F
tuner-simple 4-0063: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
tuner 4-0063: type set to Philips NTSC MK3 (F
em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 00 42 20 00 1e 03 82 18 6a 18
em28xx #0: i2c eeprom 10: 00 00 24 57 6e 00 00 00 60 00 00 00 02 00 00 00
em28xx #0: i2c eeprom 20: 1e 00 10 10 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 01 01 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 30 00 30 00
em28xx #0: i2c eeprom 70: 30 00 32 00 38 00 30 00 39 00 38 00 33 00 32 00
em28xx #0: i2c eeprom 80: 00 00 18 03 57 00 69 00 6e 00 54 00 56 00 20 00
em28xx #0: i2c eeprom 90: 55 00 53 00 42 00 32 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f 74 3e 23 23 a4 92 15 89
em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 e8 df
em28xx #0: i2c eeprom c0: 2a 00 74 02 01 06 03 79 5c 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f 74 3e 23 23 a4 92 15 89
em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 e8 df
em28xx #0: i2c eeprom f0: 2a 00 74 02 01 06 03 79 5c 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 2040:4200
I2S audio, sample rate=32k
500mA max power
Table at 0x24, strings=0x1882, 0x186a, 0x0000
input: i2c IR (EM2840 Haup as /devices/virtual/input/input7
ir-kbd-i2c: i2c IR (EM2840 Haup detected at i2c-4/4-0030/ir0 [em28xx #0]
msp3400 4-0044: MSP3415G-B8 found @ 0x88 (em28xx #0)
msp3400 4-0044: MSP3415G-B8 supports nicam and radio, mode is autodetect and autoselect
tveeprom 4-0050: Hauppauge model 42019, rev B162, serial# 2809832
tveeprom 4-0050: tuner model is LG S701D MK3 (idx 62, type 38)
tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 4-0050: audio processor is MSP3415 (idx 6)
tveeprom 4-0050: has radio
tvp5150 4-005c: tvp5150am1 detected.
em28xx #0: AC97 command still being executed: not handled properly!
registered VBI
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx #0: Found Hauppauge WinTV USB 2
em28xx audio device (2040:4200): interface 1, class 1
em28xx audio device (2040:4200): interface 2, class 1
usbcore: registered new interface driver em28xx
usbcore: registered new interface driver snd-usb-audio
now, how could i record something? I saw mythv doesn't support my card...:(

http://www.mythtv.org/wiki/Hauppauge_WinTV-PVR-USB2
http://www.isely.net/pvrusb2/pvrusb2.html
Mostly there is 3 drivers and a firmware to extract, It's chinese for me ...

Hauppage WinTV Capture card

Hello,
I am trying to use a Hauppauge WinTV/878/9 capture card with
Flash Media Encoder.
But every time I do, the input and the output window are just
blue.
When I double check with an app such as WinTV2000, I have no
problem to watch tv shows.
Is that card deprecated?
TIA

Thanks for the quick response and for understanding what i'm
trying to do. Greatly appreciated.
What you're saying makes sense..however, I'm completely
illiterate when it comes to windows.
If someone could walk me through the steps on how to schedule
FME in the windows task scheduler, it would be greatly appreciated!
Of course, if anyone knows if WIN TV can play simultaneously,
that would alleviate all the woes, b/c they provide an easy
interface for scheduling.

WinTV PVR 250 compatibility ?

Hello,
Does anyone know if the PCI card WinTV PVR 250 from Hauppauge is compatible with a SIS 655 chipset based mainboard like the 655 MAX ?
At this time it is not even recognized by the system, it worked rather fine on a VIA system Abit board.

I also am having this issue, tried the PVR-250 in different slots, removed each PCI devie and tried. My system beeps an error code whenever the card is inserted, and never posts. I have the GNB Max MS-6565 Board. If anyone can figure this out please email me at [email protected]

Problem installing wintv-hvr-2200 in my Elite 8300 PCI X1

Hi all!
I do have some trouble trying to install my wintv hvr 2200 in my Elite 8300 pci express x1. My computer doesen´t recognize it at all so my best guess would be that drivers is missing. The strange thing is that my grafic-card is installed in another pci-slot(not x1) and does work fine.
I've tried installing drivers from HP but i'm lost thou i don't really know what drivers i'm looking for.
Anyway, in BIOS every PCI-slot i enabled and I have tried disable and enable it without any results.
OS is Windows 7 Proffessional installed last saturday and every Windows update is installed.
The TV-card doesn't apear in the device manager.
Any thoughts? what should I do?
Best regards,
Timmy

Is this a new card? I have dealt with Hauppauge via the support page and on the phone. Excellent support.
What verison of WIN 7? Windows Media Center is included in Windows 7 Home Premium, Professional, and Ultimate editions.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

KT-4 Utlra & Hauppauge WinTV DVB-s Nexus: problems!

Hello,
I recently upgrade my system from an MSI 6380 KT-266 to a new 6590 KT4-Ultra.
Now I can't use my Hauppauge WinTV DVB-s Nexus Sat card; in fact I can only hear sound, but I can't get images and videos....
I tried to reinstall WinXP Pro, without luck...
This is my configuration:
Case Lian-Li PC-60
Power Supply Codegen 300W
MSI 6590 KT-4 Ultra
AMD AthlonXP 1700+
ThermalTake Cu+
512MB Samsung DDR-333 CAS 2.5 (2x256)
Controller Z-Cyber Ultra ATA 133
2 HDD Maxtor 60.0 GB 7200 in Mirroring
1 HDD Ibm 40GB IC35 7200 (primary master)
1 HDD Ibm 13GB DJNA 7200 (secondary slave)
1 Li-Teon CD-RW 24x10x40 (secondary master)
SVGA MSI GeForce 2 GTS-2 32MB DDR
D-Link Ethernet Adapter 10/100 530TX
Creative Sound Blaster Live! 1024 Player
Hauppauge WinTV DVB-s Nexus
AGP Slot : GeForce 2
PCI Slot 1: D-Link
PCI Slot 2:
PCI Slot 3: Hauppauge
PCI Slot 4:
PCI Slot 5: SB Live
PCI Slot 6: Controller
Drivers: Last Detonator, last Creative drivers, last hauppauge drivers, last c-zyber drivers
OS: Windows XP Professional
Bios: Last version 1.10
May you help me, please ?
Thanks,
Regards
Fast

Hello,
I recently upgrade my system from an MSI 6380 KT-266 to a new 6590 KT4-Ultra.
Now I can't use my Hauppauge WinTV DVB-s Nexus Sat card; in fact I can only hear sound, but I can't get images and videos....
I tried to reinstall WinXP Pro, without luck...
This is my configuration:
Case Lian-Li PC-60
Power Supply Codegen 300W
MSI 6590 KT-4 Ultra
AMD AthlonXP 1700+
ThermalTake Cu+
512MB Samsung DDR-333 CAS 2.5 (2x256)
Controller Z-Cyber Ultra ATA 133
2 HDD Maxtor 60.0 GB 7200 in Mirroring
1 HDD Ibm 40GB IC35 7200 (primary master)
1 HDD Ibm 13GB DJNA 7200 (secondary slave)
1 Li-Teon CD-RW 24x10x40 (secondary master)
SVGA MSI GeForce 2 GTS-2 32MB DDR
D-Link Ethernet Adapter 10/100 530TX
Creative Sound Blaster Live! 1024 Player
Hauppauge WinTV DVB-s Nexus
AGP Slot : GeForce 2
PCI Slot 1: D-Link
PCI Slot 2:
PCI Slot 3: Hauppauge
PCI Slot 4:
PCI Slot 5: SB Live
PCI Slot 6: Controller
Drivers: Last Detonator, last Creative drivers, last hauppauge drivers, last c-zyber drivers
OS: Windows XP Professional
Bios: Last version 1.10
May you help me, please ?
Thanks,
Regards
Fast

Wintv-hvr850

Similar Messages

Maybe you are looking for