Wintv v6 application software for wintv-hvr-1800 tv tuner card

I have recently purchased HP pavilion m8307c desktop pc in 2nd hand condition & with out Hard Disk. I have istalled fresh Hard disk in it. However, Huappague TV Tuner Card wintv-HVR-1800 is installed in it. I have downloaded software from card manufacturer web site. But during Installation it ask for valid cd of wintv v6 or highier. May hp provide me original software of the above mention card in iso formate or CD if possible?

kpw786 wrote:
I have recently purchased HP pavilion m8307c desktop pc in 2nd hand condition & with out Hard Disk. I have istalled fresh Hard disk in it. However, Huappague TV Tuner Card wintv-HVR-1800 is installed in it. I have downloaded software from card manufacturer web site. But during Installation it ask for valid cd of wintv v6 or highier. May hp provide me original software of the above mention card in iso formate or CD if possible?
Hi,
Have a look here:
http://www.hauppauge.com/site/support/support_pvrusb2.html
A valid WinTV application CDROM will be needed to install this WinTV v6 version. Any WinTV-NOVA version 4x, WinTV-PVR, WinTV version 6 or WinTV v7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to this WinTV v6 version, you can purchase a new CD on the Hauppauge webstore.
I don't think HP will provide anything as you said that the desktop is a second hand and the CD should have been provided by the original owner. In case that you don't want to spend much money there is always some torrent servers where the WinTV app CD can be downloaded from.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Similar Messages

Application Softwares for Audigy 2zs plantinum

Hi there
Where can I obtain all the application softwares for the ? I lost my CD wallets that contain all the application softwares in it.
Thanks

Thank you so much for the link. I got almost all the drivers. My Audigy also has a breakout box and a remote control, but I can't seems to make it works. I checked all the connection include the power supply, but no help. I google around and seems like that one of the possibility is the drivers that I installed does not support the breakout box. Can someone help me with this? Thanks in advance
K

Need application software for Audigy Platinum

I just re-installed my Audigy Platinum card and dri've into an XP SP3 system, downloaded the latest drivers from Creative and it works just fine (ty Creative!). I even used the optical out connection to my Denon 5. AVR and it sounds great.
However, I don't have any of the application software and can't seem to download that software from the website without having some old application software already installed. Is there a work around?
I do have the original disk for the following Creative cards (which I also own):
Sound Blaster 6 PCI (part # 220ML0003020)
Sound Blaster Li've!? (part # 220ML0003060)
Sound Blaster AWE64 (part # 73330530-)
I'm reluctant to try installing any of the applications from these disks in order to enable the appropriate application software to be downloaded/installed off the web, as I don't want to risk messing up the present clean driver installation. I did try putting the disks in the dvd dri've to see if that would enable the download/install process (this has worked with other products) to no avail.
I would very much like to have the complete set of applications for this still excellent card/dri've so I can enjoy the full functionality of the Audigy Platinum.
Any and all assistance will be greatly appreciated.
Thank you,
John W. Wright

THANK YOU FOR THE ISO!!!
It worked flawlessly.
However, I did a messy job of installing it. I had installed the beta drivers before using the iso, and then when I installed the CD and its drivers none of the utilities worked. I then tried uninstalling the utilities but the installation stalled and failed repeatedly. Luckily, I had the option to system restore, but it was on a save point in the middle of installation. So its a pretty sloppy job.
One thing: when switching between modules (EQ, or volume control, or EAX); there is a 6 second wait.
Also, EAX reverb does not work well on Soundfonts (very faint reverb, but definetely not sufficient).
But thank you very much for saving my life.

Where can i download the oracle applications software for DBA

Hi,
I want to know few things regarding oracle applications.
1) What exactly is oracle applications
2) Where can i download the oracle applications software
3) I am currently working as oracle DBA, so i want to enhance the dba skills to oracle application, so where can i find further help,documentation related to oracle applications and dba related to that.

Oracle Applications is an integrated ERP solution, with Finance, Manufacturing and CRM modules. Please visit appsnet for further information.
Unlike other Oracle products, Oracle doesnot give free software downloads for Oracle Applications. They were once giving trial versions for about 40 USD. Now I am not sure, please check up Oracle website www.oracle.com. Look for link on "e-business suite" under the 'products' directory.
If you can get hold of documentation on 11i, you can check out System Administration and Application Object Library (AOL) modules, these fall in your area. You can find this on oracle website or metalink.
Be aware that general Oracle DBA on 8i or 9i is a different ballgame than managing 11i. Lot of websites are available for these harried people, and for more information, you can visit the websites www.appsdba.com, www.oncalldba.com or do a general google search.
If you can get hold of a book "OCP for Oracle Financials 11.0" by Christopher Allen and Vivian Chow, this has good documentation on above two modules. But this is in 11.0, not 11i.
Hope this helps.

Looking For TV through G5 with Tuner Card

Looking for a tuner card to plug n the co axil cable for the cable box to the G5 to have the Tv cable and computer play on one screen, so I can elinimate my physical tv all together. if there is a tuner card i can put into the G5 and plug the cable wire in to the card on the back of the G5 then output to the screen, This solves the problem of needing two screens in the house... Any one with any help would be appreciated and wins a free tv from me...... Aloha Reid

You could use a FireWire tuner from:
<http://www.elgato.com>

Video Converter Application/Software For Mac

I would like some recomendations on there types of apps.
I plan on mostly converting .mkv and .avi to .mp4 or any format that is compatible with the iPhone 4 and/or AppleTV 3.
I have seen the Smart Converter on the App Store but i am not so sure about it

What do you need it to do?
SnapzProX is the traditional leader, but it's been falling behind in the last few years due to its aging UI and feature set.
There's a new wave of capture apps that do more than SnapzProX. Some prefer iShowU now. The Layers app records windows as individual objects so if you later notice something was in the wrong place, you can rearrange them afterwards instead of reshooting. Camtasia is a popular Windows app that many Mac users considered superior to SnapzProX and were happy Camtasia finally came over to the Mac. ScreenFlow has some features that SnapzProX is definitely missing like the ability to highlight where the cursor is, and display an overlay of which shortcut keys are being pressed.
If you only want to record the entire screen and you're not picky about frame rate, quality, formats, or presets, you can just use the built-in screen capture in Snow Leopard.

Hi all, i want a software for mac which can view conntact card in address book. please help me.., Hi all, i want a software for mac which can view conntact card in address book. please help me..

HI ALL,
I HAVE TWO MACBOOK AND ONE WINDOWS SYSTEM. I WANT TO SHARE THE CONTACTS OF WINDOWS 7 TO MACBOOKS. ALSO I WANT TO SEE THE SCANNED CONTACT CARDS IN MY ADDRESS BOOK. PLEASE GIVE ME A SOLUTION FOR THIS.

iCloud: Troubleshooting iCloud Contacts
Yahoo won't sync with iCloud and isn't supposed to.

Is their virus removal software for i mac and i tunes ?? thanks

how can i clean any viruses on my i tunes or i mac?

See my Mac Malware Guide.

Standalone application for data acquisition using NI DAQ card

I have made a standalone application in labview GUI for data acquisition and signal processing. if i have to run this application in any other computer what all softwares should be installed other than labview runtime engine...NI DEVICE DRIVER CD alone is to be installed or do i have to install any other software for data acquisition using NI daq card??
thanks and regards
Solved!
Go to Solution.

You should only need the run time engine, The device drivers for the device, maybe need VISA drivers if you are doing serial or something of that nature, You may need the channels or tasks created in NI measurements and automation if you created them there.
There may be other things that you will need depending on what you include in your code and what tool kits that you have installed.
Tim
Johnson Controls
Holland Michigan

Tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"

tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?

This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody.

Software and application cd for Soundblaster Live/Audigy Windows

Hello, i have got a Soundblaster Li've Platinum 5. and a computer with Windows xp. I need the software and application cd for the Soundblaster li've/audigy to make it work as i want .Who can help me get this cd or a copy?Anton.

Download Sound Blaster CD ISO?s:
http://hosted.filefront.com/BadBoyforum

HT1444 Hi, I just tried to open Word and this message appeared - 'You can't open the application Microsoft Word because PowerPC applications are no longer supported.' I just recently loaded OS X Lion does this mean my software for MS Office is now out of

Hi, I just tried to open Word and this message appeared - 'You can't open the application Microsoft Word because PowerPC applications are no longer supported.' I just recently loaded OS X Lion does this mean my software for MS Office is now out of date? Do I have to purchase a new package? Any help appreciated.

Hello:
Office 2004 was written for the PowerPC chip only. There is no emulation in OS X 10.7.
I encountered the same issue sometime ago when I updated to OS X 10.7.
There is one option that I might mention (other than buy Office 2011). I switched to Apple's iWork. Pages (the word processing package) is completely compatible with Word. If you export Pages documents, you can export them in formats compatible with Microsoft programs. iWork also contains programs that are compatible with Office presentation and spreadsheet packages.
The reason I mention this is that the cost is about 1/2 of the cost of Office.
Barry

Where can I download application developer software for PC?

I am looking into developing applications for iphone and ipod. I need a developer software for PC though. I do not plan to purchase a Mac. The only problem is I do not know where to download a developer software for PC. HELP ME

You can't. None exists.
(58771)

SCCM Software Updates (and SCUP) vs. Application Management for 3rd Party Application Patching

Hi,
We're getting ready to tackle the phenomena known as Java patching, and I was wondering if I could get your personal preference; SCCM Software Updates (and SCUP) vs. Application Management for 3rd Party Application Patching?
I probably should give a little background on my environment; It's a university atmosphere, so unless it's policy, you have to ask nicely...can't tell people to do things they don't want to; multiple version of required versions of Java for what ever reason,
which need to be identified, grouped together, and then upgrade as much as possible without breaking their old applications.
I was thinking that Application Management probably made more sense where it is more robust, especially for removing multiple installs of Java on a single system, but Software Updates/SCUP looks like it was built for this type of patching, so I'm a bit confused
why SCCM would have two components which essentially did the same thing.
Your thoughts?
Thanks,
Bill

For Java version management specifically you can already achieve a lot by using the Application Model in CM12.
You can define supersedence between the different versions, just make sure to opt for uninstall of the older version when defining it.

After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help.

After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help. The MacBook Pro is one day old.
Thanks

Hi, Im am also having this same problem,same message, trying to make a photobook with a non-refundable voucher. my Macbook pro is like 2 months old and im up to date with all of my updates.
What ended up happening with this problem for you because, Ive emailed cheese123 3 times and they haven't replied???
Can you help me? Thanx

Wintv v6 application software for wintv-hvr-1800 tv tuner card

Similar Messages

Maybe you are looking for