WinXP drivers for Ethernet/SCSI combo card

Hello,
I have a combo Ethernet/SCSI card which I am using under Windows XP. While the SCSI part is detected and working under XP, the Ethernet Card is not.
I booted Linux to get a little more information about the device:
03:00.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
03:00.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
03:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
WinXP does not find any drivers for the PCI bridge and the Ethernet controller. Are there any drivers available anywhere?
Thanks for any help.

Instead of chasing for an unavailable driver (Sun doesn't supply a Windows driver for the hme), get an another Ethernet card.
Ethernet cards for PCs are inexpensive, these for SPARC systems are a lot more expensive.
Edit: I don't know why I initially suggested to get an Ethernet card that is on the HCL.
Michael

Similar Messages

Windows Update installed the drivers for the wrong sound card?

I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

Linux drivers for SUN Quad PCI card

Hi everyone.
I have a question regarding drivers for a Sun QUAD network card. I belive it is a X1034A card.
The card is also marked with a label saying: *5015406063174* and a barcode. On another label it says: P04280713
Is there any chance that this card would function under a Linux operating system on an intel x86 server?
Does anyone know where I could find the drivers for this configuration?
Best regards,
Rod

Take a closer look at the actual card,
particularly at the central Ethernet chip.
If I recall correctly, it is a DEC DC2115x chipset for 10/100Mbit connectivity,
and should be natively recognized by Linux.
The 501-5406 QFE card, as shown on a 3rd party web site.
Install it and boot your system.
You should know in just a few moments whether it'll work,
or whether the Sun firmware is of any concern.

Windows drivers for SUN Quad PCI card

Hi everyone.
With the risk of being flamed, I have a question regarding drivers for a Sun QUAD network card. I belive it is a X1034A card.
The card is also marked with a label saying: *5015406096836* and a barcode. On another label it sais: QFEPCI
Is there any chance in h**l that this card would function under a Windows system?
Best regards,
Johan Christensson

Hello Ben,
I own the IntraServer LSI5464E which appears to be 501-5406-01 (using the DC21153-AC which was on my card manufactured by Intel not DEC).
I was wrong, the 21153 is a PCI-to-PCI Bridge chip by Intel. I thought it's similar to the DEC PCI Fast Ethernet DECchip 21140.
The 4 Ethernet controllers chips are manufactured by/for Sun.
The datasheet for the LSI5464E is still available, while the drivers aren't.
Michael
When will the deficencies/bugs in the Forums software be fixed ?

Help with Drivers for Ethernet Controller (on a T42)

When I go to my Device Manager .. i see this category called 'Other Devices' .. under which I see:
- ? Other Devices
--? Ethernet Controller
I can't seem to locate the right drivers for my T42.
I was able to find my PNP Device ID for this and it says:
PCI\VEN_168C&DEV_1014&SUBSYS_833117AB&REV_01\4&39A85202&0&10F0
Error Code: The drivers for this device are not installed
Can someone point me in the right direction for this driver ?
Thanks
EB

Your "other" Ethernet card is IBM (Atheros) a/b/g wireless card and here's the driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67214
After downloading it, make sure to unpack it from the following directory: C>Drivers>Win>Wlanath
And while I'm at it, here's your Bluetooth driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-50245
C>Drivers>Win>BDMC
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Drivers for new scsi...

I try install Solaris 9 on scsi drive with IBM ServeRAID 4-Lx 160 Ultra SCSI, but it failed - not found any drivers. Then i install it on ide.
I can`t find ANY drivers for this card...
LSI chipset - no drivers from IBM and symlogic, no drivers from sun.
It`s hardware not from HCL.
Anyone know how can attach this card to solaris 9?
PS: I know - my english too bad (russian) - sorry for this!

What is the model of the system you are using?

If i upgrade my drivers for my xtreme music card i get no sou

I install the drivers from the supplied CD that came with the XtrememMusic card and it works, get full sound etc. But if i download the latest drivers (audio console, drivers etc) as soon as they are installed I get no sound from from the card! This forces me to uninstall the Creative X-Fi drivers and software completely and go back to the drivers supplied with the card. Why is this happening?

Don't know about your problem but i have a different one.
I installed the latest drivers from CL site and then today i was checking the Windows update site when there was a Creative XFi update available. So i got it and it just screwed all the sound up. Made my mic echo and allsorts.
Teach me for trusting MS to supply updates for something that as naff all to do with them realy. Should of know because the last time i did this for my Nvidia 8800 card it did the exact same thing by screwing everything up. Doh! lolMessage Edited by taylorig on 08-20-200706:20 PM

L520: are there any Win 8 drivers for Ericsson 5521gw WWAN card?

I can't find any Win 8 drivers for my L520. There is a driver listed on the Win 8 beta page, but L520 is not mentioned there.
Is the 5521gw card working on Win 8 x64? Do I need the beta driver or do we have to install the Win 7 version?

I can't find any Win 8 drivers for my L520. There is a driver listed on the Win 8 beta page, but L520 is not mentioned there.
Is the 5521gw card working on Win 8 x64? Do I need the beta driver or do we have to install the Win 7 version?

A2ZS Pro: WinXP/drivers for Lin

Hello,
I've been having issues with the card. Whenever I play music on my PC after a while I can hear a loooooooooong BEEP and the sound crashes. The only way to listen to music again is to restart Windows XP.
I have similar issues on Linux, though I don't need to reboot.
Q: where can I get drivers for Linux, I tried searching, no luck.
Q2: how to resolve the BEEP issue on Windows XP?
Thanks.

bumpety!
Is my post being ignored purposefully? Come on, it's been four (yes, 4) months since I first posted, I guess I have no more patience left.
If I called Creative support, would I also have to wait that long for anyone to notice? This is ridiculous.Message Edited by didka on -05-2005 05:06 AM

2000-412NR Notebook - need drivers for ethernet/networking/pci device

I have no drivers installed ethernet adapter, network adapter, or pci device (not sure what that is). I failed to locate the proper drivers on the hp web page, but I do have hardware ids for these devices:
ethernet adapter:
PCI\VEN_10EC&DEV_8136&SUBSYS_3577103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_3577103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
network adapter:
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C&REV_00
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C
PCI\VEN_1814&DEV_5390&CC_028000
PCI\VEN_1814&DEV_5390&CC_0280
pci device (what is this?):
PCI\VEN_10EC&DEV_5209&SUBSYS_3577103C&REV_01
PCI\VEN_10EC&DEV_5209&SUBSYS_3577103C
PCI\VEN_10EC&DEV_5209&CC_FF0000
PCI\VEN_10EC&DEV_5209&CC_FF00
Please help me find these drivers! Thank you, in advance, for your time.

Hi @Lucky_S
Welcome to the HP Support Forums!
I understand that you are trying to find drivers for some of the devices on your notebook. I am happy to help you with this, but I need to know which operating system you are trying to find drivers for. Please post that information, and I will try to find what is available for you.
Is the Windows Version on My Computer 32-bit or 64-bit?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Tecra A2 - Need XP drivers for LAN and WLan card

Hey,
I've got a rather old.. second hand Toshiba Tecra A2 laptop and apparently its in need of an ethernet controller and a network controller drive.
I've been using the toshiba website to download many drivers for this model laptop successfully.
I have installed them all - but i apparently still need these drivers. Where can i get them from.
Or where might i be going wrong in finding them?
Thanks for any replies ^^
P.s, its windows xp professional

Sorry - in fact on the toshiba driver downloads page, i downloaded the LAN driver etc, moved the download onto my laptop, extracted all folders and there was no installation device but only an un-installation device, as when i clicked it, it asks " do you want to remove all drivers for all wired intel PRO network connections?"
if i should continue with this what i thought to be un installation program.. let me know :)

Where can I find WinXP Drivers for my Satellite P305D-S8828?

Hello every1 from Turkey.
I want to downgrade my Vista to WinXP Pro because of some reasons.
But on Toshiba driver page, I cannot find my laptop and of course Win XP drivers I bought my laptop from USA with a bargain price. Its P305D-S8828
http://explore.toshiba.com/laptops/satellite/P300/P305D-S8828
My question is simple. How can I find XP drivers for my Laptop? Toshiba USA only has a few drivers that I dont really need.
I need your help.
Thanks from now
EMRAH

Hi
As you said this is a Toshiba US notebook and if you need some drivers, you should take a look on the Toshiba US driver page.
Unfortunately, it seems that the US page does not provide the XP drivers at this time.
But dont give up buddy from my own experience many different notebooks are equipped with the same devices. So usually the drivers from other series could be compatible too.
Therefore you could try to collect some XP drivers which were released for other series like P300/P305.
Check it out!

Missing WinXP drivers for Satellite A300/A305

I bought a satellite a305-s6829 in US. I changed the OS to XP.
My problems re the following:
1) i have 3 devices that remain unknown and Toshiba USA has published incomplete XP drivers for this model.
I don't know which hardware are not functioning and have no idea how to identify them. At first I installed a program that's supposed to identify these unknown devices but it lists all the hardware in the laptop! So how am I supposed to know which ones are unknown.
The device list is long and it is kind of difficult to isolate the unknown devices.
2) I am unable to find the ACPI Common modules for Win XP for this model. Is there a compatible ACPI module for the A300/A305 from other models?
I am unable to install the other important utilities for the laptop since I don't have this, e.g. power management.
3) Ever since installing XP, I am experiencing BSOD.
I am not sure what's causing it. Maybe it is related to no. 2, i don't know. Has anyone else experienced this?
Can somebody help me with these issues?
Thanks
-yazunuri-

I had as of sept 12/2008 the same problem with a satellite A305, spent weeks finding drivers for XP, thought I had them all and installed the OS from 0, Everything worked great... at least I thought so. Then I noticed no "fn" keys working for turning down the brightness of the screen and preventing the system from draining the batteries, so looked for hours for the solution. Downloaded through the support page:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
The drivers you are supposed to download for Windows XP are: common module, hotkey and zooming utility. Be careful there are two versions of hotkey available. Only one works so just try them, now I have amore decent way to switch between monitors, and controlling the brightness. When you turn off brightness goes back to the highest.... but it works, I can even suspend or hibernate my system.
I don't know why Toshiba keeps telling people that my system had not such a driver for win XP, the truth is, it is not the best but works, and besides all the "conspiracy" of laptop manufacturers pushing us into Vista and us trying to resist, we have to fight in order to keep alive XP waiting for the final successor of XP to be born. I am a Microsoft fan but... no comments about Vista anymore, just switch to XP and enjoy having your system ready (full of applications) in only 1 minute and 40 seconds, hibernate it in 20, have it back and ready in 35, and the list of fast speeds of XP goes on and on.... hope you can solve the problem is just a matter of time to spend in front of your laptop.
IT CAN BE DONE, do not ask TOSHIBA, they'll tell you cant.

Correct Drivers For Ethernet MacBook Pro Late 2008 Windows XP on BootCamp

Hi;
I have a late 2008 unibody MacBook Pro running OSC 10.5.8. When I first got it I setup a dual boot with Win XP using Bootcamp.
The problem I have is that the Ethernet NIC port has stopped working and has a yellow exclamation in SYSTEM (its fine in OSX). I have uninstalled it but cannot install the drivers as I do not know what to install.
In SYSTEM HARDWARE it was listed as nForce but I do not know which version of nForce chipset is used in the MacBok Pro. Someone has mentioned upgrading Bootcamp but I do not know which version I currently have and it has also been suggested to simply re-use the drivers from the original install CD, I have them but cannot see where to get the drivers from.
Any help would be great.
Ta

I'm looking into running Windows 7 64bit on the exact same MBP you have, so I'm curious as to whether or not you've found a solution yet outside of the forums.
Do you think it might be that the bootcamp 3.1 update is only for Windows 7 32bit and not for the 64bit version?

Problem with islsm drivers for my wifi card

Hello! I'm using stable version of Arch Linux with newest beyound kernel (2.6.19 AFAIR) and trying to compile islsm drivers for my wifi pci card.
I've downloaded source like it is showed in http://prism54.org/punbb/viewtopic.php?id=1557 and cut headers like it is showed in: http://bbs.archlinux.org/viewtopic.php? … +directory
(i used 'sed -i /linux.config.h/d *' because i didn't compile kernel by self and make searches config file).
Unfortunately after make load i get:
make -C /lib/modules/2.6.19-beyond/build SUBDIRS=/home/radious/islsm MODVERSION=/home/radious/islsm/symbols MKPWD=/home/radious/islsm modules
make[1]: Entering directory `/usr/src/linux-2.6.19-beyond'
Building modules, stage 2.
MODPOST 4 modules
make[1]: Leaving directory `/usr/src/linux-2.6.19-beyond'
FATAL: Module firmware_class not found.
FATAL: Module relayfs not found.
FATAL: Module crc32 not found.
Could anybody help me with this problem, any advice is welcome.
Thank you.
EDIT
Ok, there was no problem:) It's enough to copy *.ko files /lib/modules/KERNEL/misc and load them by modprobe.
This thread can be deletad, thank you.

Hi: Unfortunately, the support pages are not working for most of the newer HP PC's. It has been that way for about a day now. Since I am not employed by nor do I represent HP, I am not sure when they will have the pages working again. Check back again some other time. With the Independence Day holiday weekend in the USA, I would not expect this to be taken care of immediately.

WinXP drivers for Ethernet/SCSI combo card

Similar Messages

Maybe you are looking for