WINXP not able to detect the built in sound card

Hi,
I'm using 875P Neo Series (MSI 6758 M/b NEO) Mainboard.
I try to install the driver from the CD drive utilities installer...
After install the "Intel INF Drivers" but can't found "MaxSoundDriver" in the
installation CD. Anywhere I have download the "ADI SoundMax Drivers for ICH5"
and do the installation again. Below prompt message appear:
Severe
=====
Driver not found! Reboot you system and run this setup again.
I did reboot and reboot. But still encountered the same problem.
It seem the built in Sound Card not detected by WinXP.
But the WinXP system setup and working fine.
Kindly advise. Thank you.

Hi Blazer,
Thank you for you reply my inquest.
And sorry for the above "typo" error... of "SoundMax Drivers".
In previously, I'm using the utilities driver installation CD,
to install the "INF Drivers" and "SoundMax Drivers".
But I didn't saw the menu of "SoundMax Drivers" during running the CD.
So I download the latest version of "Intel INF Drivers"
and "ADI SoundMax Drivers for ICH5" from
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=434&kind=1
The "Intel INF Drivers" setup fine and do reboot my system.
But when I doing the installation of "SoundMax Drivers"
Below message prompt pop.
Severe
=====
Driver not found! Reboot you system and run this setup again.
However, I do reboot the system and try re-install again... same error too.
I did install also the "XPInfoView" utilities from the driver installation CD.
it show the "NO Sound Card" found.
kindly advise. Thank you many many.
Regards.
Goon Fui

Similar Messages

Not able to Delete the data from Memory card

Hi all,
I have bought a new nokia 3120 classic.it is working fine but recently i have received some data from my friend.
Then suddenly the problem begins like.. when i take a photo.. i am getting error like the image is not in the format and i am not able to save that.And also, the main problem is I am unable to delete the data from my memory card.
Every time after deleting i am getting the same data.
Why this happening..is it because of VIRUS?? If so how to delete the virus from my memory card??
When i contacted the nokia care people in bangalore they are saying that they can offer the service of formatting the memory card??
Except that my Phone is working fine..the problem is with Memory card!!!
Please help me...

you can actually format your memory card first see if you have such option on your phone to format directly from the phone if that is not possible you can always use a card reader and reformat your card using your pc. just understand that all data from that memory card will be lost unless you do a back up of it. if you do a back up and restore the data to the memory card after reformat you might get the same issue so be careful as to what you will decide to do with the data from the card. once you format your card it should all be good unless the card is corrupted itself which can also happen. but first try with the reformat and see if it works out for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

My HP Pavilion doesn't detect the built-in webcam

Sir, I have a built-in webcam that used to work perfectly until recently. My Laptop came with Windows 8 in 2013 and I upgraded it to Windows 8.1. However, now my computer is not able to detect the built-in webcam. I know it's a software problem because the hardware couldn't have been damaged. I have tried installing the 'youCam software' with the help of HP recovery manager, and it was successfully installed. Still, when I open YouCam, it says, "No available camera detected. Please check if camera is connected and try again". Even device manager has no 'imaging devices' option. I guess something turned the webcam off, and for some reason, no driver is able to turn it back on I need to get that camera working. My product name/number is, 15-n010TX. Please let me know what I can do.. thank you

Try a hard reset as follows:
1) Remove the battery and unplug the DC power adapter.
2) Press and hold the power button for more than fifteen seconds.
3) Plug in the DC power adapter (leave the battery out for now)
4) Press the power button
Please post your positive or negative results here in your thread. Customer self repair media libraryhttp://h20464.www2.hp.com/index.html

ECHO on built in sound card

Does anyone know how to get rid of the echo on the built in sound card for the 865PE NEO2 mobo's?

Do You Have your Users Guide For your Motherboard?, As the Screen that I want you to go to is on Page A-3 In the "Users-Guide", as I am Absolutely Positive that you have one of the "Acoustic Enviroments" Enabled, Such as "Concert Hall" or "Cavern", And this Control Panel Screen, is The First Choice if you Click on the Sound-Max Icon in "All Programs"..If you have the Sound-Max Driver, Software Loaded, then you Must have this in your All Programs Menu, If Not I suggest that you Unistall the Driver, then Reinstall the Driver and Software from the MSI CD that came with the Motherboard ..............Sean REILLY875

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

I have not been able to get the built-in iPhone 4S keyboard dictation to work. I talk into it, then tap "Done", then the phone "thinks" for a few seconds (the purple dots pulse and I see the network icon on the top bar spinning) and then nothing happens.

I have not been able to get the built-in iPhone 4S keyboard dictation to work. I talk into it, then tap "Done", then the phone "thinks" for a few seconds (the purple dots pulse and I see the network icon on the top bar spinning) and then nothing happens.
Siri is wroking fine

I am experiencing exactly the same problem, today, and a reset, of all settings, did nothing to correct it. Any suggestions would be welcome. While dictation in all apps is out, Siri is working fine also.

TA38556 I am trying to set up my apple tv using the hospital network. I am able to detect the network and chose it. But the way the system works is that you have to agree to the terms and conditions of using their network. How do I accomplish this with ap

I am trying to set up my apple tv using the hospital network. I am able to detect the network and chose it. But the way the system works is that you have to agree to the terms and conditions of using their network before access the internet. How do I accomplish this with apple? Please help.

There are some other options to you, if you're not at home and nobody is using your router you could set it up at the hospital, if this isn't an option you could get a second router and use it. Many ethernet routers are available on the cheap, and ethernet cables are cheap too.
Also, a macbook can share it's internet via the built in wifi it has. See this go to settings-sharing-internet sharing and configure as desired. This may require an internet connection via ethernet. But you should be able to create a wifi network for using something like airplay/home sharing.

Not able to get the connection to mssql server thro native sql

Dear Experts,
I have created a database connection to mssql server thro DBCO t.code.Am not able to get the connection when i am executing Native SQl for geting connection of mssql server.
DATA: CON_NAME LIKE DBCON-CON_NAME VALUE 'BIW'.
EXEC SQL.
CONNECT TO :con_name AS 'C1'
ENDEXEC.
Am always getting sy-subrc = 4. The user name and password i have given in dbcon table having full authorization to access mssql database. I am working SAP ecc 5.0. Also both servers are running in windows.
could anyone hlep me on this issue.
Thanks in advance.

Hello, the submitted error must be analyzed according to the Syntaxis and characteristics of the MSSQL database. See explanation of error.
http://doc.ddart.net/mssql/sql2000/html/trblsql/tr_reslsyserr_1_1o1i.htm
Error 156
Severity Level 15
Message Text
Incorrect syntax near the keyword '%.*ls'.
Explanation
This error indicates that the syntax of a Transact-SQL statement is incorrect and that the syntax error was detected near the keyword specified in the error message. The most frequent causes for syntax errors are misspellings of Transact-SQL keywords or operators, and specifying the syntax of a Transact-SQL statement in the wrong order.
One of the more complicated causes for this error may be a compatibility level mismatch for the current database. If the current database has a compatibility level other than 70, Microsoft® SQL Serveru2122 will not recognize any of the keywords that a database with a compatibility level of 70 would recognize.
Action
First, check the Transact-SQL statement syntax near the keyword specified in the error message. Because Transact-SQL language syntax can be very complex, SQL Server may incorrectly report the position of the syntax error as later in the Transact-SQL statement than it actually occurred. Second, reexamine the entire Transact-SQL statement that generated the error. Verify the syntax order of the statement.
Ensure that the database does not have a compatibility level of 65 and has a compatibility level of 70.

Not able to get the full screen in Youtube with latest firefox

Hi All,
I was using the FF 3.0.10 came with ArchLinux pacman. Recenty I downloaded the latest FF from mozilla website and put that in /opt/firefox. I am able to do all other things in it except watching the full screen flash video from Youtube. The browser stucks when I click on the full screen option. But that is working fine in the old browser ( Gran paradiso ). I am not able to find the root cause of it. An idea ?

silvik wrote:launch firefox with: LD_PRELOAD=/usr/lib/libGL.so.1 firefox
Yes that helped, thanks.
But it only happened with youtube flash movies, others were able to go fullscreen.
I got the following error messages in the console after the crash (cut off):
LoadPlugin: failed to initialize shared library /home/andi/.mozilla/plugins/libmks.so [libexpat.so.0: cannot open shared object file: No such file or directory]
*** glibc detected *** firefox: munmap_chunk(): invalid pointer: 0xa8398020 ***
======= Backtrace: =========
/lib/libc.so.6[0xb7cbd281]
/lib/libc.so.6[0xb7cbe4b5]
/usr/lib/libGL.so.1[0xaa912205]
======= Memory map: ========
08048000-0805a000 r-xp 00000000 08:02 136715 /usr/lib/firefox-3.5/firefox
0805a000-0805b000 rwxp 00011000 08:02 136715 /usr/lib/firefox-3.5/firefox
0805b000-0805c000 rwxp 00000000 00:00 0
a419b000-a4f06000 r-xp 00000000 08:02 176929 /usr/lib/libGLcore.so.185.18.14
a4f06000-a50f3000 rwxp 00d6a000 08:02 176929 /usr/lib/libGLcore.so.185.18.14

I am trying to authenticate at Filevault preboot using external Serial (RS232) to USB convertor where USB port is connected to my mac machine.But on preboot I am not able to type the password using console where my machine is connected.

I am using an external keyboard which is actually a Device KeyAT who do the keyboard simulator kind of operation over Serial (RS232) to USB connector.
I have a controller machine connected with Serial Port and MAC machine is connected by a USB port to that device.
I am able to type the password on OS X login screen but on using the same device and set up on Filevault preboot I am not able to type the password.
This connector is detected as a USB 2.0 composite device in System Hardware table.
Can someone hints or point out a potential cause or to rectify this issue.
Thanks in Advance.

Which os version are you using?
Which iPod Nano model do you have? iPod Models
iPod not recognized in iTunes and Mac desktop

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages)..... Do the following have free copyright

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

Java aplication not able to detect card reader sometimes

Hi
We have a Java application (jre1.6.0_05.) which runs as window service under "Local System". It tries to detect card reader after every one minute. Normally it is working fine. However on some machines (which can be Windows XP, 2003 Server etc) some times it is not able to detect Card Reader, while other applications (which are not Java based) are able to detect. Sometimes service restart helps in solving the issue, but it reoccurs again after few hours/days.
Below is the exception we get:
javax.smartcardio.CardException: list() failed
at sun.security.smartcardio.PCSCTerminals.list(PCSCTerminals.java:109)
at javax.smartcardio.CardTerminals.list(CardTerminals.java:55)
Below is the code we are using to get list of terminals:
TerminalFactory factory = TerminalFactory.getDefault();
try {
terminals = factory.terminals().list();
} catch (CardException e) {
e.printStackTrace();
}Any idea what might be causing this random problem?

Hi,
According to the source for OpenJDK 6 (b19) the only way to get the exception you posted was with a PCSCException being thrown with the root exception wrapped in the new exception.
// from PCSCTerminals.list(State state)
try {
// do some stuff to get the reader list
} catch (PCSCException e) {
throw new CardException("list() failed", e);
}If this was not the case in the version you have, you will definitely see the root cause with the new JDK.
Cheers,
Shane

My iPhone's bluetooth is not able to detect another iPhone iOS 7.0.6. (latest)

my iPhone's bluetooth is not able to detect another iPhone iOS 7.0.6. (latest)

Speakers, keyboards, headsets, pulse monitors, pebble watches, cars with hands free systems, etc.
Are both phones signed into itunes under the same user?
are you trying to transfer purchased music to someone else in violation of itunes terms of service?

Time capsule error: Time Machine could not be configured. The built-in network interface could not be found.

Trying to install a new time capsule. I get access to the time capsule via Finder and I am able to surf the web. When trying to chose backup disk, it allows me to chose the Time Capsule from the list and type my password. I then get the following error message:Time Machine could not be configured. The built-in network interface could not be found.
What now?

iblastoff wrote:
glad im not the only one with this issue...
i've been able to do one single time machine back up. tried to backup today and i am getting the "time machine could not be configured. the built-in network interface blah blah blah" crap.
Besides this "me, too" complaint with no information, what have you done about it?
Have you tried this: http://support.apple.com/kb/HT3275#5
What is your backup destination?
What sort of Mac do you have (please update your profile)?

Have msg on header: Firefox is not able to show the Toolbar. Please re-install the Toolbar. I cannot figure out how to re-install the Toolbar, nor exactly where to go to find it for download.

There is a message on my Firefox header that says: "Firefox is not able to show the Toolbar. Please re-install the Toolbar." I would like to re-install the Toolbar, but don't know where to locate it for download. It has conveniences I use frequently & I'd like to get it back. Thank you for your help.

Firefox has a couple of built-in toolbars, but if it mentions re-installing, it probably is an add-on toolbar. Do you know which one it was, e.g., Google, Yahoo, etc.? It might be on your extensions list here:
Tools > Options > Extensions

WINXP not able to detect the built in sound card

Similar Messages

Maybe you are looking for