WinXP SP1: 4-in-1 not installing IDE-driver?

When I run the 4-in-1 4.43, it never installs the IDE-driver (In device manager it still shows the MS-drivers). I know I can install the driver manually (unzip the 4.43 and select from there) but I'm not sure if that is smart
Does anyone know:
-Why the IDE-driver doesn't install? Are the original XP drivers better?
-Is there any advantage/disadvantage in manually installing the IDE-driver?
Thanks.

if you didn't have any HDD performance issue, no bother to change it
In case you don't know, there is separate IDE drivers,
http://www.viaarena.com/?PageID=66  
Or you can extract the 4.43 4-in-1, then at Device Manager, choose Update Drivers... point it to the \IDEWinXP\ folder.

Similar Messages

  • It says "can not install the driver: could not find media for this driver"

    I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says  "can not install the driver: could not find media for this driver", how ever i get a beep for every error message.  In my device manager there is no UAA and in services.msc windows audio is started.
    I have tried almost everything on net but not able to solve this, plz help.

    vendor wrote:
    = No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
    I think there is not.
    Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
    Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
    Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
    IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
    jutapa

  • Trying to Perform an install of SCSM 2012 SP1 - SQL Analysis Services Not Installed

    I'm performing a clean install of System Center Service Manager 2012 on a Windows 2012 server.   The prerequisite checker told me the Analysis Objects were not installed.   I clicked the link and downloaded the SQL Server 2008 R2 Analysis
    Management Objects.   I restarted the install and it still says it's not installed.  I also tried installing the 2012 version of the objects and still no luck.  
    I also tried installing both the x86 and x64 versions of these tools.
    I have also tried the same install on a Windows 2008 R2 server and had the same error.  I'm convinced this is a bug in the setup.
    Has anyone else seen this?  Is it a known issue?

    Try to check the log file SCSMSetupWizardxy.log under C:\Users\<username>\AppData\Local\Temp
    perhaps it could not load Microsoft.AnalysisServices.dll assembly.
    12:23:55:**************************************************
    12:23:55:CheckPrerequisites: Checking Microsoft SQL Server Analysis Management Objects prereq.
    12:23:55:Entered RequiredAMO
    12:24:08:Trying alternate method of detection using Assembly.Load
    12:24:08:Error occured while loading Microsoft.AnalysisServices.dll: Could not load file or assembly 'Microsoft.AnalysisServices, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
    12:24:08:CheckPrerequisites: Logic Type:and AMO-err: 2
    12:24:08:
    12:24:08:CheckPrerequisites: Microsoft SQL Server Analysis Management Objects: Failed
    12:24:08:
    12:24:08:**************************************************
    can you confirm if that assembly exists in the Assembly folder.
    on a side note: SCSM 2012 SP1 supports 2008 R2 SP1 or above, and double check that the account you are using to install the SM is a local admin.
     

  • Installing IDE drives into MacPro

    I'm in the market for a MacPro. I have 2 IDE 3.5" drives, currently connected via FireWire in their own cases, that I'd like to use in the MacPro. I realize that the DIY HD install documents say I need a SATA drive, but is there any way to install my IDE drives into the HD drive bays (not the optical drive bay)?

    Hi John Dougherty;
    You are welcome.
    You might consider give out some points for a solved question.
    Allan

  • Can not install device driver in Windows 8.1

    I can not install driver of my webcam(Odyssey OD 202) windows 8.1 (upgraded from windows 8)
    The USB webcam is shown in Device manager.
    When I attempt to update driver and search for it automatically it shows the following message.

    Hi Atanu Barai,
    There may be a compatibility issue between the Microsoft driver and the device . I agree with ZigZag ,you may need to download the driver from the manufacturer website .Please pay attention to the compatibility ability issue with the
    Windows 8.1 when you try to download the driver.
    If the issue persists, try to plug in the device with another USB port to have a check .To verify whether it is caused by the USB controller ,we can try to connect another USB device to have a check.
    Meanwhile ,please check the Event Viewer for related information.
    Best regards

  • Windows 8.1 will not install the driver for Officejet 6310 All-in-One

    Have downloaded the driver from the HP website, but it will not install. The download wizard "detected a problem with the driver software" but did not say how to resolve it. The option to download the software was still available, so I did that anyway. When attempting to execute from my hard-drive, extraction occurs, followed by a delay, and then a message that reads "This application has requested the Runtime to terminate it in an unusual way". This is in an error box headed "Microsoft Visual C++ Runtime Library".  Can anyone help please? 

    Hi AB-Comp,
    Welcome to the HP Forums! I understand that your are seeing the error The download wizard "detected a problem with the driver software". I am happy to help you with this issue! I have some questions for you:
    What Operating System are you using? Windows or Mac? What version?
    Can you make copies with the printer?
    How is the printer connected? Wireless, Ethernet, or USB?
    Is the power cable plugged into a surge protector or directly to the wall outlet?
    Hope to hear from you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • DO NOT install this driver for Sound Blaster Audigy SE, or Sound Blaster Audigy Va

    I have two creative products that work fine under xp. But since installing vista my sBli've platinum doesn't work at all, i find out that creative are no longer supporting this card for vista. Fair enough... So I'm waiting for the SB audigy driver update and behold I read that i shouln't install the driver for my other Sound Blaster card, Audigy SE.
    what are creative trying to do? does'nt look like a well run company.
    And from what I've read what is the point of getting a card that is suppoted by the new driver as other people seem to be complaining that this new driver doesn't enable all the features as under Xp.

    If I am right your Audigy is the first Audigy (EMU0k2) soundcard that was launched by Creative Labs. You need the drivers for the audigy series. For driver/application updates: Latest downloads Audigy Platinum
    For a proper install, you may use the tools Driver Cleaner or Driver Sweeper in Windows Safe Mode to clean up the older drivers that are left in the system which can cause the problems you are having now; you can find these tools at Guru3D (under 'General Utilities').
    After that You can install the drivers including the software/applications by using the install cd which is supplied with your Audigy soundcard, and then install the driver updates manually afterwards.
    Or you can try out the new Daniel_K's driverpack (software/applications included, install cd not needed): SB Audigy Support Pack 2.8.000EQ (08/22/2008)
    Good luck!
    Message Edited by CTman on 09-23-2008 05:38 PM

  • Satellite C50-B-13D - Can not install display driver

    Hello,
    I have a notebook Toshiba Satellite C50-B-13D. I had to reinstall my Windows 7 Professional 32 Bit OS. Now i have a problem with the drivers. For example i can not install the display driver. After i give permission to make changes on my computer the Error message "This computer does not meet the minimum requierments to install this software. Does anybody know what i can do?

    Originally Posted by TomDexter
    As I’m not mistaken the Satellite C50-B-13D does not contain dedicated GPU but the notebook was equipped with the Intel Celeron N2830 CPU which support the Intel HD Graphics 4000
    So you need to install the Intel HD 4000 display driver.
    Usually you have two possibilities to install the driver.
    You can execute the installation.exe (setup.exe) file or you will install the driver within the device manager. I recommend you to choose the 2nd option in case the standard procedure does functions.
    The driver from Toshiba EU driver page has to be unzipped.
    Within the display-20140528122046 folder you would find the TC40214900E.exe
    This is an zipped folder. Click right on this file and choose “unzip here”.
    Now you will get another TC40214900E folder where you would find all the driver files (dll).
    Next step: go to device manager, choose graphic card and click update/install driver
    Now choose the “Advanced” installation option and point to the unzipped driver folder.
    The system will pick up the files automatically and you could finish the installation.
    That’s it.
    Hello
    I have same problem and can i use mentioned driver "TC40214900E.exe"? my notebooks model is satellite C55-B5201

  • Can not install printer driver

    I purchased a Canon Pixma MG5350 and try to install the driver but this message appears on my screen: The system extension “/System/Library/Extensions/hpPlugInInit.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
    It is the latest one and there are no more updates on this driver. What should I do?

    Thank you sberman for your answer. I have tried it but it doesn't work. I just deleted the plugin and everything that had to do with HP, emptied my trash and rebooted my mac and the driver was correctly installed, finally! Now I have another problem though. I can not add the printer to the laptop via System Preferences > Print & Scan and it does not even show in System Information > Usb that I am connected to the printer. The printer comes without a USB cable so I bought one yesterday and think that is the problem.

  • I can not install any driver for any print to my laptop.

    I have been trying for months to install a driver for just one printer and we have five or six printers.
    My problem is that every time I install a driver it fails and rolls back, everytime. It would just about completely finish installing before rolling back.
    My laptop is a Windows Vista Home Premium Service Pack 2.
    PS:  There were three other users before me that was using this laptop.  I know all three of them and none of them know much about computer. So I tryed to clean out all the junk out of it.
    I got a little more info for however reads this post.  The error that I recieve has no number or error code it just says "Fatal error during installation," but it also has in the title bar this "C:\Users\Justin\AppData\Local\Temp\7z1763\Setup\.​.\Setup\hpzprl01.exe, which seems like it might help.
    Hope that helps.

    I figure out what my problem was.  Here is what I did: I recheck all of my services and startups. If you need help I'll layout steps for you. Just reply that you still need help.

  • Vista Ultimate SP1 (retail dvd) will not install on new Mac Pro

    I wish to dedicate a new 1TB hard drive in Bay3 on a brand new Mac Pro for Vista Ultimate SP1, preferably 64-bit. I have tried several times to install a retail dvd version of Vista Ultimate with SP1 (both 32- and 64-bit) without success on two different hard drives (first the one in bay 3; then, after lack of success, the one in bay 4). The installation process does not proceed beyond the stage where Vista must format the hard drive. Vista always displays the message that Vista cannot be installed on a disk of the "GPT style." After giving up on the installation, the disk appears to Disk Utility as a "GUID" disk.
    I am seeking advice from anyone who might be able to help me proceed. The remainder of this message provides more detail about what I have tried.
    Before starting Boot Camp, I formatted the hard drives initially as MS-DOS FAT, and on later attempts, as Mac OS Extended (Journaled). Neither matters. After several attempts, I verified the functionality of the drives by partitioning them using Disk Utility and then repartitioning to one partition. Both 1TB drives appear healthy and can be partitioned and re-partitioned.
    When Bootcamp Assistant (BC) calls for the Vista disk, the Vista installation proceeds until the stage when Vista calls for me to identify a hard drive partition for installation. After selecting the largest partition on drive 2 (in bay 3; size 931GB) , the BC Installation and Setup Guide instructs me to "format" the partition. When I do so, the following Windows error message appears:
    "Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
    Based on some forum comments, I also tried a different procedure at this stage of the Vista installation. Instead of choosing "format," I first chose to "delete" the selected partition. The disk then appears as "unallocated space." I then chose "new" and "apply" in the hope that it would create a correct NTFS partition for Vista. It then appears as Partition 2 of either Disk 2 (or Disk 3, which I tried subsequently). However, the subsequent "format" still yields the same error.
    I tried both procedures with Vista 64-bit and with Vista 32-bit. No difference.
    Suggestions most welcome.

    When I provided a link to threads about "Install Vista SP1 DVD" I knew and had in mind a couple threads where people have tried. And trying will help understand.
    You don't need to format as NTFS on another PC when just installing MacFuse plus 3G driver extensions will let you do so on your Mac Pro. And that is just one option. There are always multiple ways to get to the same place.
    Due to EFI changes there is a tool and tips on how to convert your DVD, but I didn't have time to go back and find and pull those together.
    Installing SP1 DVD attempt without success:
    http://discussions.apple.com/thread.jspa?threadID=1501656
    http://www.ezbsystems.com/ultraiso/
    MS OSCDIMG.exe
    Yes, it’s a fairly long process and requires you to download stuff (and be running Windows in the first place) But, it does work as long as you follow the instructions correctly.
    Convert DVD to ISO and prepare for EFI booting on Mac
    tried rebooting about 10 times. No luck. Finally I pointed Parallels (free trial available) to my blank bootcamp partition and set parallels to boot from CD before HD. Parallels booted the Vista install CD just fine, and put Vista on my HD. Crashed at the end though and said it couldn't make the boot camp partition bootable so all changes were removed. Rebooted under boot camp and the installer came up fine off the CD.
    So if you have this problem, and nobody else can help, and if you can find it, maybe you can download..... Parallels. Feel free to post this on the other threads. Unlike other workarounds I'm guessing this will work for everyone and it only takes a free trial download of parallels to give it a try. Still wish apple would acknowledge the problem and post a fix. Can't be that hard.
    I think VMWare Fusion also supports vitualization with the bootcamp partition as the target so that may help you get around this install bug in boot camp(or the mac's firmware) too.
    I would have thought that with Intel and Microsoft both saying they would begin to support UEFI with Vista SP1 64-bit, and Apple is part of the EFI Group, that "we're different" was a thing of the past. Instead it is harder.
    http://www.microsoft.com/windows/products/windowsvista/sp1.mspx
    Remember, Google is your friend (usually) - "Apple Vista SP1 64-bit DVD Install":
    MacBook Pro Vista SP1 64-bit Install:
    http://andersonshatch.wordpress.com/tag/vista-64-bit/
    Oh, and while I read Apple KB changes daily, I have never seen anything address Vista SP1 64-bit install, support, etc mentioned once. Am I missing something? or is it MIA?

  • Can not install ATI driver for Satellite 1900 notebook

    i have the sattellite 1900-203 and i downloaded the winxp driver but every time i try to install it it say
    (setup can not copy the fileati2mtag.sy_) any1 has any idea?
    how can i contact the technical support ?
    thanx

    Hi
    It will be interesting to know which driver you have downloaded exactly. Is this driver given by ATI or designed by Toshiba?
    I dont know in which country you live but on this page you can find the right address http://www.toshiba-europe.com/eu/contact/details.asp?group=By+Country .
    Bye

  • Lenovo System Update not installing a driver

    I reinstalled Windows 8.1 Pro on a X1 Carbon Touch, model 3448.  I then installed the Lenovo System Updater, version 5.06.0027.  Many drivers were installed, but I still have an unknown device in Device Manager.  In msinfo32.exe, I see this in Problem Devices:
    ACPI\LEN0078\5&2890D6990&0
    A web search seems to indicate I need a Lenovo Power Management driver.
    Any idea why the Lenovo System Updater does not identify this device and install the appropriate driver?
    Solved!
    Go to Solution.

    Hi,
    download and install that PM driver in manual mode.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Can not install Ethernet Driver on my Equium A100-147

    I am trying to install my ethernet drivers and the drivers I got from the site, apart from not being able to access them on sunday they do not work, windows does not pick them up and there seems to be no install/setup file?
    Please can someone help this is really annoying now...
    OS: Windows Media
    Wireless: Working
    Ethernet : Not working
    Help!

    Hi
    It seems that the Equium A100-147 belongs to the PSAABE.
    Please be sure that you have used and installed the right LAN driver for this series!!!
    I think the notebook uses the Intel Ekron-R(82562GZ) Chip.
    If you want you can download the Lan (Ethernet) driver from the Intel page.
    This will works for sure!!!

  • Can not install WXP driver for WLAN card on my Satellite A200-14D

    i have a problem with wireless driver for win xp
    i installed win xp and the only problem is the wireless lan driver
    help me please

    What you mean it does not work? Can you install WLAN card or not? Is your problem WLAN card installation or you can not establish WLAN connectivity?
    Please write a little bit more. Is so bad to write few sentences more and describe what happen exactly. Is there any error message or what?

Maybe you are looking for