WIP Closing entries not posted in FA for the month of March

Dear Team,
WIP Closing entries not posted in FA for the month of March -2010. Please check and revert immediately. Print screen and KKAO -WIP Report given below for your reference. Same issue is there for FISHER also.
Regards,
Suma Nalluri.

thks

Similar Messages

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.

I tried to redeem a digital download copy of a movie and was presented the following error:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
Any guesses on what it is and how to resolve it?
Thanks

Hi
Abhilash Francis,
Could you tell us your scenario? What's your project? Is it a WCF service?
Looks like this is not a code issue.
Just from the error information,
it seems that you do not configure the service certificate very well so as to Server was unable to process request.
I am not completely sure what the real scenario is, but it might be a problem of that It is a WCF services application, please check these following articles to configure the service certificate.
If not, please feel free to let me know.
How to: Configure an IIS-hosted WCF service with SSL
Could not establish trust
relationship for the SSL/TLS secure channel
Hope this helps.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

J1INQEFILE is not generating for the month of March 2011

Hi,
J1INQEFILE is not generating for the month of March 2011, we have executed Qefile from 01/01/2011 to 31/03/2011 then file is generating but March 2011 data is not available.
Problem is challans were updated in the month of April 2011 for March 2011 documents, When we executed J1INMIS report with Bank Challan status, documents are coming in the report.
As per our understanding Challan numbers and Bank Challan update should be done in the month of March 2011 but challans and Bank challans were updated in the April 2011.
Please suggest.
Thanks,
Ratnam

Hi Vara,
Please check following thing in the system.
1) When the Challan is created ( March month or April 2011)
2) When the Bank challn updated for the challans
3) If the Challan created in the April and generating returns for the month of March 2011.
4) Check in J1INMIS report for the month posting date 01.03.2011 to 31.03.2011, if the external Challan number is appearing or not for the documents.
5) If the Challan created in the April ask user to revere through J1INREV, and make Challan in the month of march 2011.
Problem will solve.
Thanks,
Ratnam.

TDS BANK CHALLAN for the month of march 2009 not able to update on 7.04.09

dear gurus
we have made the tds payment for the month of march (01.03.2009-30.03.2009) as on 07/04/2009 and 31.03.2009 as on 01.05.2009 the tds payment voucher and internal challan number has been updated ..but while i am doing the NEXT step THROUGH J1INMIS where we have to give the bank challan number manually and update but after this step the bank challan number which i have given manually not able to update in J1INMIS REPORT OR J1INQEFILE - Quarterly E-returns (India) REPORT OR IN TDS CERTIFICATE ,
sugesst what to do....

HI,
Update through J1INBANK and in selection give FY 2009 and select internal challan through drop down list. If you passed internal challan in 2008 then give FY as 2008.
Ramesh

Reporting services with R2 on DPM2012 - Could not establish trust relationship for the SSL/TLS secure channel

Hi everyone,
A somewhat similar question has been asked before by others but none of the answers given has helped me.I am attempting a DPM 2012 installation, which is failing at the "deploying reports" stage.My analysis of logs seems to point me in the direction of an SSL
error, which does not make sense since the configuration files say SSL is disabled (or at least, should be).
Here are the symptoms:
1.I am able to browse http://FQDN/Reports_MSDPM2012 folder from internet explorer
2.I am also able to browse http://FQDN/ReportServer_MSDPM2012 from internet explorer
3.The information given in the logs and relevant config files is shown below:
<<RSREPORTSERVER.CONFIG>>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSDPM2012</InstanceId>
<InstallationID>{d9b1c335-5842-4a81-9148-79184c38bf09}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions"
4.The DPM log file still appears to be using SSL even though i used reporting services configuration to remove SSL bindings:
running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException:
exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: The underlying connection was closed: Could
not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest,
Exception exception)
5:I do have an SCCM site on the default web site used by SMS clients but on different ports
I am stumped.Somebody please give some advice
Thank you

Hi
This is an old post but did you come right?

TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Set-IRMConfiguration failed with error "Cou ld not establish trust relationship for the SSL/TLS secure channel."

Hi, experts
I'm trying to configure a lab environment according tutorial http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part3.html
After completing configuration, I execute cmdlet Set-IRMConfiguration -InternalLicensingEnabled $true, but get error
The remote certificate is invalid according to the validation procedure. ---> The underlying connection was closed: Cou
ld not establish trust relationship for the SSL/TLS secure channel. ---> Failed to get Server Info from https://exhv-65
94/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : C810E449,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
Then I run cmdlet Test-IRMConfiguration -Sender [email protected] and get error
Results : Checking Exchange Server ...
- PASS: Exchange Server is running in Enterprise.
Loading IRM configuration ...
- PASS: IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- PASS: RMS Certification Uri: https://server1/_wmcs/certification.
Verifying RMS version for https://server1/_wmcs/certification ...
- WARNING: Failed to verify RMS version. IRM features require AD RMS on Windows Server 2008 SP2 with the
hotfixes specified in Knowledge Base article 973247 (http://go.microsoft.com/fwlink/?linkid=3052&kbid=973247)
or AD RMS on Windows Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//server1/_wmcs/certification/server.asmx. ---> System.Net.WebException: The underlying connection was clos
ed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authenticatio
n.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest async
Request, Exception exception)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequ
est asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Obje
ct state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()
OVERALL RESULT: PASS with warnings on disabled features
From the error message, this issue seem to related with SSL/TLS connection. So I go back to check configuration and find out a difference to tutorial. Current SCP url is https://server1/_wmcs/certification, but in tutorial it is https://server1:433/_wmcs/certification.
On my opinion, I don't think it is the real reason.
So, how can I resolve this error? Could you give me some suggestion? Thanks in advance.
System Info:
Windows Server 2008 R2 + Exchange Server 2010 SP3 RTM

Hi
Please have a try with the solution on this KB article
“Error message when you try to test access from the Microsoft Dynamics CRM E-mail Router: "Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"”
http://support.microsoft.com/kb/954584/en-us
Cheers
Zi Feng
TechNet Community Support

Could not establish trust relationship for the SSL/TLS secure channel with authority SharePoint ssis connectors

Hi All,
I am using SharePoint List Connectors to load the data from Sharepoint list to Sql server.
I have created an ssis package and attached to the SQL agent job in works fine
SharePoint Source dev url : http://company.dev.com (working fine)(http)
DB server:(server\instance)
I thought all i good and can test with the uat sharepoint url.
I have changed the configuration url yo point to uat.(https)
SharePoint Source dev url : https://companyuat.dev.com (working fine)
DB server:(server\instance)
Suddently it fails when with the following error:
In both the cases i am running the agent job from the same db server
DB server:(server\instance)
Error Message:
Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Source: Data Flow Task SharePoint List Source [1] Description: System.ServiceModel.Security.SecurityNegotiationException: Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. ---> System.Net.WebException:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Is there is workaround to reslove this?Any inputs highly appreciated as it is time to move to production :(.
Thanks
Ravi
Ravi

This is the important error: The remote certificate is invalid according to the validation procedure.
Your SharePoint server certificate is invalid. You have to either correct your certificate or make your SSIS client machine explicitly trust the server certificate.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

Could Not Establish trust relationship for the SSL/TLS secure channel Sharepoint Web services

I am trying to updateList items into a sharepoint list from the xml document stored in my shared drive in remote server. To make that work i wrote down a Powershell Script that utilizes Sharepoint Webservices Api Updatelistitems function to perform the acitivity.
I ran the script over in Dev environment it works, Then i went into QA that Works too. At last i am now in PROD and agains ran the script i am now receicing following error:
New-WebServiceProxy : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel
All of my servers dev, QA and PROD web apps are encrypted by Https 443 using Cerified root certificate. Powershell script i am running are mirror copy. System accoutn i am using has owner privileages to sharepoint site and its list.
Am i missing something here, what is blocking this traffic i have no clue.
Thank You

are u using self singed certificate?
also check this http://www.poshpete.com/powershell/new-webserviceproxy-and-ssl
http://www.brainlitter.com/2012/03/13/sharepoint-2010-and-cert-trust-could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Accounting entry not posted but MBEW table shows total stock and value

Hi
My R/3 version 4.7
I have a material which is stockable and valuated of material type ERSA(Spare parts)
This material was created in may 2007 and material ledger activated,i dont see master records in accounting view in material price analysis tab for the month may 07 till aug 07,and i see master recordsfor the month sep 07 till jan 08
For this particular material in the report MB51 for all the 3 material documents posted,there are no accounting entries in accounting document.
Also in the report output the field amount in local currency is zero for all the 3 material documents.
1.1st material document with mvt 202 for qty 1 posted in the month of may 07,no entries in acc.doc
In this case,MSEG-DMBTR(amount in local currency) was not updated
Also i dont see master records for this period in accounting view in material price analysis tab,in material master.
2.2nd material document with mvt 261 posted for qty 1 in the month of nov,no entries in acc.doc
In this case,MSEG-DMBTR(amount in local currency)was not updated.
I see master records for this period in accounting view in material price analysis tab with stock 1 qty and value zero
3.3rd material document with mvt 101 posted qty 1 in the month of dec,in this case once GR is done MSEG-DMBTR(amount in local currency) was not updated,but mbew has the entries for stock and value.
Can any one let me know why the system is not updating the mseg-dmbtr and as well affecting MB51 report
Regards
Ratha

The settings in Customizing which define that no negative stocks are allowed for the storage type, have only an effect on the transfer orders. In addition, you must also set message L9040 as an error message. For this, call up the Customizing and branch to: 'Logistics Execution -> Warehouse Management -> Interfaces -> Inventory Management -> Allow negative Stocks in Interim Storage Types'. There, execute point 'Control of System Messages in Warehouse Management' and enter message type 'E' for message number L9040

Foreign Exchange entry not posted

Hi
I posted a vendor invoice $100 @ Rs. 50 on 28th September for Vendor A. Payment term is defined in Vendor master.
Now i posted vendor payment for the same invoice $100@ Rs.53.
Now SAP is not passing payment entry at Rs. 5300 (53 x 100). Its passing payment entry for Rs.5000 (50 x 100).
Any of the accounts do not have tick for "Only balance in local currency". So according to me, it should pass forex differential entry (loss) in SAP. Also i have maintained GL account in OB09.
When i changed vendor toVendor B, it passed entry perfectly. In another vendor ie. Vendor B there is no payment terms defined at master level.
Edited by: Deepak Agrawal on Oct 3, 2009 1:13 AM

Hi Deepak,
Just check it out whether system is not issuing you any discount .
Or manually check it out forex loss GL in FBL3N whether any posting has occurred or not.
Finally if nothing goes right please assess the whether you are manually inserting exchange rate and your clearing currency is INR or USD.
Regards,
Chintan Joshi.

SSRS Report Server Could not establish connection. The underlying connection was closed. Could not establish trust relationship for the SSL/TLS Secure channel

Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
Thanks

Hi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Database does not contain a URL for the file

How do I find out what file/update this is:
The file digest/hash does not exist in the SUSDB, but I have no idea looking at the windowsupdate or softwaredistribution.log what file it is referring to.
SELECT [FileDigest]
      ,[DigestAlgorithm]
      ,[AdditionalHash]
FROM [SUSDB].[dbo].[tbFileHash] fh
WHERE fh.FileDigest =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
or fh.AdditionalHash =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
0 rows found
Softwaredistribution.log
2014-10-07 23:07:04.319 UTC   Error   w3wp.5   ClientImplementation.GetExtendedUpdateInfo   System.ArgumentException: The database does not contain a URL for the file 15B82F101E79C1E2181E43CC8A3CC137CBFDC91D.
Parameter name: fileDigests
   at Microsoft.UpdateServices.Internal.DataAccess.ExecuteSpGetFileLocations(Byte[][] fileDigests)
   at Microsoft.UpdateServices.Internal.DataAccessCache.GetFileLocations(Byte[][] fileDigests, DataAccess da)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at System.Web.Services.Protocols.WebServiceHandler.Invoke()
   at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
   at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
   at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
   at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
   at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

How do I find out what file/update this is:
Hows about.. rather than chasing a rabbit down the hole doing whatever you think you're doing...
We start with this: What problem is it that you're actually trying to solve?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

WIP Closing entries not posted in FA for the month of March

Similar Messages

Maybe you are looking for