WIP not cleared after TECO and KKAX run

Hello all,
I am facing a problem in clearing the WIP.
The process order is of 11600 kgs,Delivered is 11681kgs.User confirmed qty for 11600 kgs and later issued the 81 kg through MB31.
I made the order TECO and run transaction KKAX.Still it shows WIP for the order exist (CORM).I tried make the settlement,(KO88).It shows no accured amount,settlement not possible.
Please guide me how to proceed with this issue .Looking forward to get your valuable suggestions.
Thanks in advance
George

Hi,
From ur given situation it seems that order quantity is 11600 and against that you have made gr of 11681 that means 81 kg extra you have made gr .
In the above case the system will not give status teco to the order so you have to change manually order quantity to 11600 or if this is not possible then you see the quantity in the delivered section it will come as 11600 and for next 81 kg you create a fresh order and then against that order you should make gr of 81 kg .
then system will settle the variance amt. and it will give teco status to order also then your WIP amt will get nullified .
reward points if you find it useful.

Similar Messages

  • LM13: Verification field not cleared after [Enter] key

    Hi Experts,
    I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
    Symptom
    In customizing:
    - You have defined [ENTER] in destination screen 302 to SAVE items.
    - You want to verify the destination bin information.
    You use 'Confirm Transfer Order Clustered' RF transaction LM13.
    You scan several SUs and press enter.
    You press [F4-Next pushbutton] to confirm the associated TO(s).
    In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
    ==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
    Anyone know how to fix this issue? Pls help.
    thanks
    Hooi Fung

    Hi,
    For example itab-matnr is your screen field
    in PAI
      field: itab-matnr,
             module check_matnr_0700.
    module check_matnr_0700 input.
      move itab_matnr to v_matnr.
    endmodule.
    in PBO.
    move v_matnr to itab-matnr.
    a®

  • Note 916654 - LM13: Verification field not cleared after [Enter] key

    Hi Experts,
    I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
    Symptom
    In customizing:
    - You have defined [ENTER] in destination screen 302 to SAVE items.
    - You want to verify the destination bin information.
    You use 'Confirm Transfer Order Clustered' RF transaction LM13.
    You scan several SUs and press enter.
    You press [F4-Next pushbutton] to confirm the associated TO(s).
    In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
    ==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
    Anyone know how to fix this issue? Pls help.
    thanks
    Hooi Fung

    Thanks a lot for your prompt answer. Well yes if i clear in the PBO the value gets cleared, but then i wanted to get the next records value into the value field, well the problem got solved in a much easier way i put everything into one chain endchain statement.

  • Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

    I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
    Thank you.

    Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
    Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
    Thanks again.
    John

  • IOS 7 app store update list does not clear after updates have been installed

    iOS 7 app store update list does not clear after updates have been installed

    Rifles wrote:
    Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
    You mean like this one?
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Best of luck.

  • TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    I'm having a very similar issue, paired with iTunes not being able to get online.
    iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
    Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.    

  • CS6 photoshop not found after downloading and putting in serial number

    CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
    Thanks!

    Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
    This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
    Please please help me!

  • Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #

    CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
    I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
    Thanks!

    check your duplicate post.  there are two responses.

  • Printing quality Is not clearly after Acrobat 8.1.2 Pro updating (HP Deskjet 9800)

    *** The contents wrote with the auto compiler. (Korean -> English)
    *** Meaning of the writing could not be delivered smoothly.
    From Adobe Reader 8.1.2 Application Printing quality Is not clearly after Adobe Acrobat 8.1.2 Professional updating.
    To previously there was not a problem to printing quality.
    Like this problem gets why?
    --- System
    OS : Mac OS X 10.5.2 Leopard
    App : Adobe Reader 8.1.2
    Printer : HP Deskjet 9800 (Driver : HP web download v9.7 lastest or Leopard include)
    App : Preview.app (Leopard Default Viewer) - Printng quality is good. But is not the Adobe Reader.
    Adobe Acrobat 8.1.2 Professional update : 2008-02-20 (Korea)

    Problem solved. Does only happen with the Internet Explorer 32bit.
    With Internet Explorer 64bit it doesn't happen.
    Frederik

  • Iphone 3gs will not activate after restore and update

    my sons iphone 3gs will not activate after restore and ios update.
    phone keeps saying no service but worked fine before restore and update any ideas ? thanks

    Sorry. The jailbreak is undoubtedly the root cause of your problem.
    It is not always possible to repair the damage done by jailbreaking.
    Try searching google for an answer, but be prepared to just buy a new phone.

  • HT201263 iphone 3gs will not activate after restore and update?

    Please help my iphone 3 gs will not activate after restore and update.

    If it is locked to any carrier, insert SIM from the carrier. If it is unlocked insert any SIM to activate.

  • [svn] 3752: Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.

    Revision: 3752
    Author: [email protected]
    Date: 2008-10-20 12:41:06 -0700 (Mon, 20 Oct 2008)
    Log Message:
    Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Merged change 3676 from trunk.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-195
    Modified Paths:
    blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java

    Welcome guy -
    Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
    Many are using JQuery menus or pure HTML/CSS menus.
    If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
    By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
    ul.MenuBarVertical ul.MenuBarSubmenuVisible{
        width: 220px;
        left: 180px;

  • Pricing errors are not cleared after fixing the master data

    Hi All,
    Kindly go through the issue explained below.
    Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.  
    System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine.  Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
    Scenario     :  Opportunity is saved with pricing errors. 
    Analysis     :  Price or/and Sales area are not maintained in Product that is maintained in Oppt.  That is why this error occurs.  So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
    Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
    Actual result: When we create a new opportunity with the same product, pricing is determined.  But the errors are not going away from the already created opportunity transactions.
    Please let me know if this scenario is not clear to understand. 
    Please help with your inputs.  Thank you for your time.
    Regards,
    Maddy

    Hi Luis,
    Thank you very much for your reply.  Could you please help me where is the button 'Redermine Pricing' available?  I have checked in Opportunity transaction but failed.
    Regards,
    Maddy

  • Quality of pdf files not clear after conversion (Adobe Acrobat 9.0 Std)

    Hi,
    I am using Adobe Acrobat 9.0 standard and my computer is running on Windows XP SP3 (with Office 2003 SP3). Everything used to works fine until my laptop crashed and I need to re-install everything.
    Now when I want to convert PowerPoint presentation files (with pictures, diagrams), the pdf version becomes not clear and the fonts are smudged.
    I have re-install Adobe twice but ended up with the same problems. My colleague is able to convert the same PowerPoint using CutePDF without any problem.
    Please help. Thanks.

    You may want to try the following steps:
    open a pdf file
    click Edit
    click Preference
    in Resolution section: select Use system setting: 144 pixels/inch
    in Rendering section: select For Monitor, select Smooth line art, select Smooth images, select Use local fonts, select Use page cache
    in Page Content and Information section: select Use smooth zooming, select Use smooth scrolling
    click OK

  • Camera RAW, file not recognized after import and migration, Aperture 2.1

    Hi,
    I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
    Thanks,
    Greg

    Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
    I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
    please help! I've got 987 raw wedding photos to process!!
    I dont know what to do!

Maybe you are looking for