Wip Stock Value

Dear Friends , I have to develop a report of WIP stock . Can any one tell me the name of tables which stores information regarding WIP material and its quantity and value .

Dear Rajan,
WIP stock means work in Progerss stock. This stock will be generally available on production line .In SAP we define diofferent material code for diffrent stages of material for ex Ram Material will have one number, semifinish will have one number.In semifinish also based on varoius stages in processing can have dofferent number for ex turning stage , heat treatment stage etc.Production line will be defined by some cost center.We can find stock at any point of time with the help of code number & location.
Please check if it is helpful,
If i get more clue i will post message,
Vivek

Similar Messages

CURRENT STOCK VALUE

hi all,
i required the current stock value of the materials for each business unit, and the requirement for the next 6 months
in our case the business unit is mean that the group of finished materials of the same type.ex. cluster for the diff reqiurement from diff companys
this is the automotive company
they have business unit like
1. cluster
2. fuel system
3. body safety
how to calculate the stock value for each businees unit . for the material
for more deep in each b.u they need eport as to segrigated for ROH, WIP. FERT
PLS REPLY
VRAJ

Hi,
In MC.A you can get stock report period&material type wise.
In MB5B you can get the report on any date, VC can be used that is in close connection with material type.
In MB5L you can also get the report in current and previous period.
BR
Csaba

MC.9 Stock value not correct

Dear Friends
In mc.9 stock value is showing different than MMBE stock. What will be the reason?
Regards,

In selection screen please select radio button u201C Current Priceu201D instead of u201C Standardu201D . It will give correct value.
With regards,
Ajay

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

Items with zero stock quantity show negative stock value in Stock reports

When running Stock reports for controlling the stock value towards the GL accounts, some items appear with zero stock quantity, but the report still shows a stock value (negative value in my case)
How can this happen, and how can I correct this situation ?
System parameters are : negative stock is not allowed, Items with zero cost price not allowed. On item level average cost price method is used.
P.K.Johnsen

Hi Johnsen,
I believe you have checked the" Manage Inventory by warehouse". I have noticed this issue in SAP B1 2005B but this is rectified in 2007B. The system behaves in this way as the system maintains item cost for the item for all warehouses and even if the stock is not present in the warehouse, the system would still show you a value for the same. Hope this helps. please search the forum. You'll find related threads.
Thanks,
Joseph

Changes in stock value of the material even after closing period

The client closes the accounts every month end. Say they close the books of accounts for the month of Jan07 on 31st Jan 2007. After closing the account they are running MC.9 to know the stock value of different plants for the previous month. i.e. for the month of Jan07. But every day when the client runs the MC.9 they found some differences in the stock price & quantity.
For better understanding, consider they close the period on 31st Jan. When they run the MC.9 on 2nd Feb it shows the value say 100$ and qty of 100. When we run the same report on 4th Feb the value got changed to say 98$ and qty remain same. Again when we run on 6th Feb the value is changed again to say 102$ and stock is 100.
We checked the MB51 with posting date & entered date. We could not find any back posting.
What could be the reason for the variation in the stock price & qty ? Any pointers will be highly appricated.

Hi Venkat,
Your previous posting talked about variation in stock value and now you are saying that there are changes in stock qty also. So the better option would be to check those material which has variation and compare them with other standard reports to get a solution. Export the list of material to an excel sheet and compare them with that of the other reports. This would help you to find the materials which has changes and you can narrow down to the root cause. Once you get the material then u can go by posting date and find the movements.
Hope this helps. Reward if u find it useful.
regards
Anand.C

Custom Report for the Stock and Stock value for a specific date

Hi SAP Gurus,
Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
Our system is R/3 4.7
I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
The history tables MBEWH and MARDH are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
Thank you,
-Harter

Hi Harter,
Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Stock value and report

Hi,
how determing <b>stock value with reports</b>?
Best regards

Hi,
There are quite a few standard reports which will give you the stock value report, you can try
MC.1 to MC.9 (gives you various stock value analysis reports), MMBE, MB5W etc.
Alternatively you can extract this data from MARD table.
If you are looking for a specific report, please let us know the same & we can be more precise in the output.
Hope i was able help you on this issue.
Regards,
Vivek

Stock value showing Negative but Qty is Null

Hi Gurus,
I am using the Transaction MCBA, where i am getting the details regarding the Received Stock qty, issued stock qty ,Total stock on hand and the Total stock Value.
Here i am getting the values Zero for Received stock qty, Issued stock qty and the Total stock. But i am getting the Stock value in Negative.
When i checked the Tables it is showing as Zero only.
Please advice what needs to be done or what went wrong where.
Thanks in Advance.
With Regards,
Saakithyan.

Answered

Need to display the Stock Values at storage location level - 0IC_C03

Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal N

Hi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
   What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
Please let me know you need any more information.
Thanks in Advance
Gopal N

No Stock value at Storage location level in BW report

I am facing problem in getting stock valuation at storage location level.
The problem is that, in R/3 Stock valuation is done at plant level, when we do storage location to storage location movement , only stock quantity gets changed and no FI entry is getting generated . So there is no movement of stock values at all. when we load this transaction data into BW , obviously i will arrive with wroung value . so what to do in this case ?
Thanks & Regds,
Kavan

Hi Kavan,
Could you please explain the scenario & provide the Ds you are using.
Thanks & Regards,
Suneel

SIT Value and Stock value at storage location level

HI
Can anyone tell me how to get the following:
1. The value of the Stock in Transit on monthly basis
2. The value of the stock at storage location level. The Stock value is correct at plant level
Thanks in advance.
Soumen

Hello,
(1) please have a look into the Howto Guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92c0aa90-0201-0010-17b1-bf5b11c71257
(2) Please have a look into the note:
589024
And consider to use the feature Constant selection.
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/02223c5f00612be10000000a11402f/content.htm
I hope this helps, Michael

Report for monthly stock value

Hi SAP Gurus,
Is there any report or transaction that can show monthly stock value based on plant/GL account balance ?
Thanks for your help.
Regards,
Raj

I personally do not trust info structure data which are basis to MC.9 and MC.5
basis for MB5L is audit relevant data, while info structures are only statistics.
Ideally the data should match, but if for some reason the update to the info structure fails, then the financial posting still happens as they are technically not in the same LUW.

Report for stock value at Warehouselevel

Hi
I need to generate a report of stock value at the warehouse level.
please let me know the tables to be linked to get the report.
Thanks

Hi Nainar,
You can use MB52 and if you get the list you can use 'sum' icon to get the total value (on the selection screen you can set wether SAP should display values or not).
You can also use MB5L, MC.A transactions. If you want to check the stock only for one material you can check it in material master record on Accounting1.
BR
Csaba

Storage Location Wise Stock Value field and Table

Hi ,
Please let me know the storage location wise stock value field and table.
Regards
Suresh

Hi Suresh,
As per my understanding it is not possible in a single Table.
If this is required for customized Z report then use this logic it may gives the correct information.
In the combination of MARD and MBEW.. From MBEW you can get the value for each Base Unit of Measure then multiply that value with storage location stock.
It may usefull to u..in the mean time i will try for some other option.
Please revert if u have any query.
Regards
Durga Sana

Wip Stock Value

Similar Messages

Maybe you are looking for