Wiped my harddrive clean, only want a few files, not entire system
Hey all,
I wiped my drive clean and reinstalled osx. I have the time machine harddrive from my previous osx. I really just want to retrieve a few folders and individual files, not entirely restore the system to what it was. Any way to make time machine pick up where it left off in terms of backups?
IanF13 wrote:
Hey all,
I wiped my drive clean and reinstalled osx. I have the time machine harddrive from my previous osx. I really just want to retrieve a few folders and individual files, not entirely restore the system to what it was. Any way to make time machine pick up where it left off in terms of backups?
no. this is a new install and it will make a full new backup. no way around that.
Similar Messages
-
My last Time Machine back-up is 45 days old and only of User Account files (not entire HD) and I must now reinstall Lion (via internet) without performing a new back-up. Will any new User Account files, since my last back-up, be lost when Lion reinstalls ?
Reinstalling OS X doesn't affect user data, provided nothing goes wrong. But it would be very unwise to assume that nothing will go wrong, especially if you're having (unspecified) system issues. You should try to back up all data before you reinstall or do anything else. There are ways to do that, even if you're unable to boot.
If your backups include only user files, you won't be able to access them in Setup Assistant. -
Want to restore my computer, but only with a few files; not a complete Time Machine restore
My computer's messing up and I decided I might as well start fresh, but I want some files and folders back obviously.
I take it, I simply need to:
Turn it off
Turn it on and put the install disc into it, meanwhile holding the C key
Install Snow Leopard
Once it's installed, select the external drive I'm using for backups
Open Time Machine, right click on files/folders I want to restore.
What will and won't work? Because, it seems to me you can't redownload movies from iTunes. What about the settings? Is there some sort of .yml or something somewhere that holds them?
And, something I'm dreading, how will I get my programs back? Will I need to reenter the product key? I have Adobe Production Premium CS5.5, should I deactivate it then reenter the product key? What about the plugins for After Effects? Also I have MPEG Streamclip, and when I bought it, I don't remember having to enter any product key.
And my copy of Office for Mac 2011, I bought the 2008 box and it came with instructions of how you're eligible to get 2011 once it's available, when I went to install Office for Mac on my MBA, the offer was no longer available.
Thanks in advance.I understand the basics, I just want to know how to restore certain items essentially on a new computer without restoring everything.
-
Okay so today one of my friends used my phone to sign in to his Apple I.D I don't know why? Anyway...once he logged off there was a whole album I bought and I only wanted a few songs from that album and deleted the songs I didn't want but somehow those songs I deleted from the album showed up on my Music on my iPhone but not my Mac. I tried to download it so I could delete it but it says in 90 days you can use another Apple I.D to download songs. Is there a way I can delete the songs I don't want from that album but keep the songs I want? Help?
The music sync is one way - computer to iphone. The only exception is itunes purchases. Without syncing: File>Transfer Purchases
The iphone is not a backup device.
Copy everything from your backup copy of your old computer to your new one. -
I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?
Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html -
The search feature in Yosemite only finds a few files when I know many more exist. Is there a fix for this problem?
Are you searching for file names or content? If it's the latter dDownload and run Find Any File to search for the same file names.
FAF can search areas that Spotlight can't like invisible folders, system folders and packages. If there are files with those file names on the hard drive FAF will find them.
In any case reindex the HD for Spotlight according to this Apple document: Spotlight: How to re-index folders or volumes - Apple Support -
I only want sync SOME videos, not all, is there a way to do it ?
Hello guys!
I want to sync only SOME videos, not ALL... is there a way to do it ? i tryed to did a "smart folder" with iPhoto, for select last 6 months videos, but when i try to sync to iPhone, it doesn't sync none video, the only way is selecting "incude videos" (but i wont want to, because it will sync ALL videos, i only want some of them)
Thanks!
System:
Yosemite
iTunes 12Hi,
Unfortunately this feature is not included in Firefox at this point, but you can suggest it by following the instructions below.
The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. (You'll need to be on the latest version of Firefox to submit feedback). Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.
Hope this helps!
Curtis -
Why java only can display GIF file not jpeg and BMP ??
Did anyone know why java only can display GIF file not in jpeg and BMP ?? This is because the quality of GIS is not as good as Jpeg and BMP
any code to load the display process ??
thx guys !!!you can do jpegs but im not sure about bmps.
The only thing ive noticed is that java cant support transparent jpegs, only transparent gifs
Jim -
Only want upgrade swf file in my app
i have like 50 app compile from the same air file. But we
compile the air file online, and every app has their own names like
0345.air and 0450.air. if you see inside the file all them have
same "father" swf. Now we have to upgrade them and we want to use
only one air for upgrade all. But when the app upgraded, take the
same name from the "father" swf, and if one user has 2 app like
0345 and 0450.air installed after that only live him install one,
because the another one is the same.
Is posible to create an .air only with the swf file for
upgrade? or can i donwload the swf file and put inside the system
program files?
thank uYou need to package different apps.
AIR files with different appId are different applications.
They can updated from each other.
Your AIR app. is not allowed to write the application
directory. So you can't just replace the swf file. -
Regex: How do I match only when a string is not entirely numeric?
Hi,
I'm using java regular expression pattern matching. I want to receive a successful pattern-match ONLY when a string is NOT comprised entirely of numeric digits [0-9].
So, for example, when pattern-matching on the following 3 strings,
"abcdef" would return match = true and
"abc123" would return match = true and
"123456" would return match = falseI have tried using the regex pattern [^0-9] but this only seems to work for strings that are one character long. The pattern [^0-9]+ didn't work either.
What I need is the equivalent pattern to [^\d+] (which is an invalid pattern).
Please note that I have to solve this one using regular expressions, even though it would be trivial to solve using straight java code!
Any help much appreciated.What I need is the equivalent pattern to
[^\d+] (which is an invalid pattern).Well as its an invalid pattern, how exactly do you expect us to know what you mean by it?!?
Based on your textual description of what you want, and on the basis that you seem not to want to negate theopposite, how's this (I assume we're talking core Java regex's?):
myString.matches(".*[^\\d].*"); -
Custom service only working with one file, not multiple ones
Hi,
I created a service in which I can resize selected images through photoshop and format them for the web. I was able to successfully place this into a contextualized menu, which is awesome for me.
However, when I select a group of files in the finder, secondary click, and run the service, the action only completes the first file. The other files remain open in photoshop (they do not get resized, or saved).
What am I doing wrong?
My service workflow looks like this:
Service recieves selected "image files" in "any application"
Save for Web:
save to: "a web folder I made for this practice"
use "Adobe photoshop CS
type: jpeg
constrain size to 800 X 800
Then the second part of the workflow is"Make names Web-Friendly.
I found these plugins on Apples download page, called "save for web 2.5"
Any help would be great.
Thanks!where i said one file.. i mean one file tipe ex: .M2T .jpg .mp4 etc
-
Firefox Always Wants to Open Files, Not Save
I recently had to re-install my whole OS (Windows XP Professional) and re-download Firefox (3.6.12). Before this, Firefox not only remembered what folder I wanted something saved to, it also remembered my preference was to save and not open.
Whenever I would download something that couldn't be done by right-clicking (like a zipped video file), the "Save" option was always the choice that was checked. Now, the "Open" option is always checked and no matter how many times I choose save, Firefox just won't remember. I have looked all over "Tools/Options" and can find nothing that seems to relate to this problem.
Is there some setting I can change to get Firefox to always choose "Save" as the default? I do a lot of saving that cannot be done via right-clicking and it's incredibly annoying and time-consuming to have to repeatedly change the setting manually.
Thanks all.First of all, update Firefox to 3.6.17 a.s.a.p. via Help | Check For Updates.
There was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
The setting you're looking for is listed in Tools | Options | General, in the centre menu. You can specify there where you want to save the files to.
See also [http://support.mozilla.com/en-US/kb/Options%20window%20-%20General%20panel?as=u General Menu]
Please also visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary. -
I am sorting out all the clutter and duplicate files on my external HD. In doing this I am moving the entire contents of folders to new locations. Some of these folders cointain gigs of info. I do not want to have to spend large amounts of time waiting for hundreds of gigs to copy somewhere then moving the originals to the trash and wait even longer deleting all of them. All I want to do is move the files up a subfolder, but the way Finder goes aobut doing it can be a 400 GB swing taking hours. How do I just "move" them?
Check out this discussion. Worked for me.
http://tinyurl.com/7dmh9p5
Quote:
When I do a drag and drop in Finder to move a folder into another folder it makes a copy of the folder in the new location instead of moving it like the help documentation says and like it used to do in Snow Leopard. I have looked all over in preferences for a setting the contols the move/copy outcome of drag and drop and have been unable to find anything. Is this the way Lion is supposed to work?
MacBook Pro, Mac OS X (10.7.1)
This solved my question by jsd2 on Oct 9, 2011 6:33 AM
I did a global change of permissions for the entire documents account in the currrent user account using the get info and apply to enclosed items.
I think what is happening is that the Documents folder normally carries an "everyone deny delete" ACL, meant to protect it from accidental deletion:
$ ls -lde ~/Documents
drwx------+ 6 t1 staff 204 Oct 9 08:51 /Users/t1/Documents
0: group:everyone deny delete
ACLs are special types of permissions that do not show up in GetInfo, but can get propagated if you click "Apply to Enclosed Items" on a folder that carries them. Affected files that acquire that ACL would require password authentication to move or delete them.
I think the following Terminal command (copy and paste it) should remove such ACLs from items within the Documents folder:
chmod -RN ~/Documents/*
Message was edited by: miz_mdk -
Here is the etrecheck report. Any suggestions of some other maintenance I can perform on my computer? A mac tech did a system diagnostic and found nothing wrong with the hardware. I have already reinstalled Mavericks, so it seems like the next step is wiping the harddrive clean and starting over, but I want to avoid that if possible! Can anybody help?
EtreCheck version: 1.9.15 (52)
Report generated September 2, 2014 at 6:11:15 PM CDT
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:28:34
Disk Information: ?
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (346.45 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ?
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.focusrite.driver.usb2audio (1.7 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) Support
[loaded] com.waves.driver.soundgrid (2.0.0) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.paceap.eden.licensed.plist Support
[running] com.waves.daemon.SoundGridProtocolService.plist Support
[loaded] PACESupport.plist Support
Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
User Launch Agents: ?
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 5.4.2.18903 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Safari Extensions: ?
wrc
Searchme
Amazon Shopping Assistant
Ebay Shopping Assistant
SlickSavings
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Tuxera NTFS Support
Time Machine: ?
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 142.30 GB
Destinations:
TOURO Mobile 3.0 [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 2
Oldest backup: 2014-08-04 21:26:13 +0000
Last backup: 2014-08-14 23:31:16 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 142.30 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
4% SGProtocolService
2% firefox
1% fontd
0% WindowServer
0% imagent
Top Processes by Memory: ?
270 MB firefox
106 MB com.apple.IconServicesAgent
66 MB Finder
41 MB mds_stores
33 MB mds
Virtual Memory Information: ?
5.92 GB Free RAM
1.02 GB Active RAM
369 MB Inactive RAM
712 MB Wired RAM
282 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I want to add items to the bookmarks toolbar. for example: the Zoom Toolbar addon. This works, but not only the favicons appear on the bookmarks toolbar, aswell as the underlined text. How to avoid this?
I only want the favicons from an addon to appear on the bookmarks toolbar, not with the underlined text. How to do this?
This problem doesn't happen with any other toolbar. And this problem didn't happen with an earlier version of firefox. Please Help!
Thanx, BassMann.If you only want the favicons and not the names of the bookmarks on the bookmarks toolbar, you can do that with the [https://addons.mozilla.org/en-US/firefox/addon/4072/ Smart Bookmarks Bar] add-on.
Maybe you are looking for
-
Broken Pipe / Connection Reset Errors
I know they come from the user hitting the stop button on his browser. They are benign and can be ignored. I just don't want to see them in my logs (or my email box) anymore. Anyone figure out how to disable the logging of these messages? ####<Jul 14
-
How do you install mac osx snow leopard 10.6.3
when installing on my pc it says i need intel what do i do to install the snow leopard 10.6.3
-
hi, Could you please tell me if we can expose tcode so as to access that from J2EE? (just like what we can do for FM in the form of webservices) Regards, Abhijeet.
-
So much debate what is SELECT DDL or DML ??
Hello, I am very much confused. So many resources available on the net about the SELECT statement. Most of them say it is a DML. But my Consultant said that it is a simle query language neither DDL nor DML. And I am very much convinced with this. Can
-
TS3274 camera screen is blank/ black and not working.
Camera screen is blank and wont work.