Wiped our old iPad 1 clean, now can't install iOS from iTunes. iTunes does not "see" the devise. Tried uninstalling and installing iTunes on laptop. Also bought new USB cable. The iPad is charging, but that's all it does.
Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista). iTunes does not "see" the device. Tried uninstalling and installing iTunes on laptop. Also bought new USB cable. The iPad is charging, but that's all it does. Just want to get it operating again for browsing and e-reading.
OK. You merely erased the content and settings. The IOS is still there.
If it has NEVER been jailbroke, here are some standard repair procedures. From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.
Similar Messages
-
I can't access Itunes Store via my Itunes. When Itunes start, CPU always 100%, I've tried uninstall and reinstall Itunes but it seems to be useless. Please help !!!
I can't access Itunes Store via my Itunes.
Is iTunes endlessly saying "Accessing iTunes Store"? Or is something a bit different going on? -
A toolbar called Searchqu got installed in my web browsers.I uninstalled Mozilla Firefox without removing the toolbar and it stopped working saying that can’t connect to the server.I uninstalled and installed Firefox but it isn’t working.
See this thread for potential ways of removing Searchqu from your system: https://support.mozilla.com/en-US/questions/790833
-
My ipod touch has lost touch with my itunes account. I appear to have lost all my audiobooks from itunes and a nook I downloaded from audible.com last week is on my itunes but I cannot syn it to my ipod. I have tried uninstalling and reinstalling itunes but this did not work and I now have a different screen with itunes which I am not familiar with. I need my ipod for audiobooks and podcasts because I have a visual impairment.
iTunes 11 does some thinks differently. See:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
or
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
Also
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar -
Logic does not see my hd omni as an input device. Any ideas? I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.
I'm having the same issue with a file called IMG_2353.MOV that was imported into iPhoto from my iPhone and also have to manually select the items to import (so the rogue file doesn't error everything out). I've tried using Image Capture to locate/delete the file directly from my iPhone, but even though I can SEE it in Image Capture, I can't delete it or anything. This is VERY frustrating! My friend/Apple guru's only suggestion was to backup my phone then restore it through iTunes. Risky but should do the trick. I'm too scared to try, though!
-
I purchased Final Cut Pro X App on the Apple App Store and was wondering how I also get it downloaded on my ipad#2AS WELL….. I paid for FCPX and want it on both my Macbook Pro, and my iPad2, can i do this, if so how?
There's no way FCP X will run on an iPad - sorry.
Look at the system requirements:
http://www.apple.com/finalcutpro/specs/
Andy -
HP DJ4645 scanner does not see Mac OS 10 Maverick and computer does not see scanner
HP DJ4645 scanner does not see Mac OS 10 Maverick and computer does not see scanner.
I installed drivers and software from the HP website. Printer works fine but scaner does not work over WiFi. I did not try over USB because printer and computer are not in same room.Hi @mamedina ,
I see that you are not able to scan over the wireless network. I would like to help you resolve this issue.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Deskjet 4645)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
I have provided a document to make sure the Scan to Computer is enabled. You will have to select 10.8, then Network Connection. A 'No Computer Detected' or 'Connection Error' Message Displays When Scanning for HP Officejet 4610 ...
If you are still not able to scan, then I would connect the printer to the computer by a USB cable to see if it is a network issue or the scan port might be blocked on the router. Unfortunately the printer isn't accessible in the same room, but this will rule out a software issue or a network issue. You can contact the router company to check and open these ports 9220/9500/427 on the router for scanning.
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
I am getting and error code 150:30 when I try to use my CS4 AI, PS and AE. I tried uninstall and install again but same code
ok Can I tell when it is stopped or if it didn't work. It is still saying the same thing. I can't see a progress bar or anything. Do you have any idea how long it usually takes. Just curious so I know i din't make another mistake
-
I have tried uninstalling and installing itunes several times following the outlined tutorial. During part of the installation i get a message that recommends me get in contact help/support and concludes with HRESULT:0x800736B3 ...................any ideas?
The links on this Support page may be of help: http://www.apple.com/support/itunes/install/
-
I'm running windows7 and I'm trying to connect my iPhone4 and iPod touch2 to itunes. I've installed the latest version of iTunes, and updated my iPhone's driver. When I connect either device to iTunes I get the message "you need to uninstall and reinstall itunes". I've done this multiple times with the same results. This is very frustrating, HELP!!!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753) -
IPhone5 lock button clicks but that's all it does...
I called Apple (no store near me) and the tech said because it does click, it can't be a harware issue. Thus, if I wanted him to tell me how to fix it I would have to pay up for tech support. Thought I'd try on the forums first.
I have updated to latest ios, restored, etc. Obviously I can work around with assistive touch, but would really like a six month old device to actually just work. (my common wish with apple products, as you can see from my screen name!)
Has anyone had this issue turn out to be a fixable software issue? Thanks!Dirty Vegas wrote:
iwishitjustworked wrote:
So, the tech was lying to get my money?
If I'm reading correctly, you called AppleCare. In order for the AppleCare Advisor to give you advice, you need to be an AppleCare client. Yes, there is a charge for that. If the advice turns out to be, "Make a Genius Bar reservation" that would be the excellent advice that you are paying for.
The advisor is correct. Don't call a for-pay service to try to get free service.
if phone is under hardware wannanty it is an exception and customer does not have to pay anything.
if customer did restore and everything there is not much more troubleshooting that advisor can do.
if customer told him he did restore he should have explained replacement options. -
Like, every time I hit recover, it tries to contact the server or whatever and then it can't find it. The screen is stuck with the iTunes and the USB cable thing on it. Somebody please help me! Do you think if I take this to Radio Shack where my mom bought it for me my warrenty would help either get a new iPod or they could fix this for me? If anybody knows how to fix it, pleaseeeeee, pleeeeease help me out.
Download RecBoot and see if that will kick it out of recovery mode.
Try doing a manual install following the instructions in the link below.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.
If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
Can't login to the front end of my Joomla installation. Backend is still OK at the moment. Have tried different accounts and re-setting passwords etc. and it's not that. Just keeps returning me to the login page.
wonder wrote:
vic wrote:
wonder wrote:what's your user id?
when asked for uuid/uid?... I put 100. I thought any random number would do...
look in /etc/pam.d/gdm-password
in arch and in general >= 1000 are normal users, < 1000 system users
is that how it works? can i change it from 100 to 1000 or just make a new one?
anyways i'll look to it.
Maybe you are looking for
-
Hi MM Gurus, Scenario is Service Purchase Order for Travelling Charges , Service maintained at service tab is travelling charges 12 nos for 38000/- each item cat D . In main text of PO item qty appears is 1 nos and amount is 456000/- ok. Service tax
-
I forgot the security question and e-mail backup Please help
I forgot the security question and e-mail backup Please help
-
Hello World web site to test my W2K installation...
.... has not worked. I've created a directory d:/MyApp with a single file index.html and an associated WEB-INF/web.xml: <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 1.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
-
Software update check on apple website
is there a way i check in apple website for software update or release available rather than doing software update everytime to check on for any update
-
Hello All, While trying to post intercompany transfer of asset the system is showing the following message "Transaction type 230 not possible (no affiliated company specified" Im using transfer variant 7(Gross variant (affiliated company). But when I