Wiping a PIN lock off a Samsung Rugby 4 Cell Phone

I desperately need to find out how to remove a PIN lock password on a Samsung Rugby 4 phone.  An invader coming into my home at night has a way of changing the PIN password or simply installing one after the phone is wiped for $60 at Cell Phone Repair Co.  It's getting very expensive to keep wiping the phone and therefore I'm asking if there's anyway to do it myself...   Thank-you, in advance, for any help I get on this matter!!!
This topic first appeared in the Spiceworks Community

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Similar Messages

  • Itunes on my macbook air to my samsung galaxy note cell phone please??

    hello,
    I'm trying to transfer my iTunes library to my samsung galaxy note cell phone.  I've downloaded an app that says it can do it, but it's not working.  Can you please help me with this?
    Thank you!

    iTunes is not capable of syncing music to a non-Apple phone.

  • Can an inactive Samsung Nexus (Verizon) cell phone be unlocked by it's original owner?

    Can an inactive Samsung Nexus (Verizon) cell phone be unlocked by it's original owner?

    Unlocked for what purpose? To use on another network? Sorry, but no. The Samsung Galaxy Nexus will have the 700 MHz frequency already unlocked from the factory, but it won't do you any good as Verizon Wireless is the only carrier I know using that frequency band. The rest of the phone can't be unlocked for use on other networks.

  • Photoshop 6 locked up while trying to upload cell phone pic...need help!!!!

    I tried to upload 97 pictures from my cell phone to photoshop elements 6 on my computer. The first 31 uploaded then photoshop became locked up and I can't do anything with it. I went back through my camera and turns out there were 2 videos of my daughter riding her bike for the first time that come right after picture 31..This has apparently caused the lockup but I don't know what to do. The adobe phone line help support guy had no idea either and said he could'nt support 6.o anyway and sent me to this forum he said was run my adobe photoshop engineers who could help me. I was able to upload all 97 pix plus the two short videos to a windows viewer on my comupter and have deleted the videos off my cameras memory card. When I tried to upload the 97 pix again to photoshop 6.0 it locks up and says these pix already exist in photoshop. I'm very technologically challenged and haven't backed up the pictures on my photoshop in a couple years (Yes..I know..not smart!) So, can one please tell me how to fix this problem? Thanks so much!!!!!!

    Hi Emma,
    Did you manage to find a solution for this? We are in NZ and having the same issue across out network of agency computers... Our IT supports answer is to overhaul the machines (at a huge cost!) but we're not even sure this is going to work... a bit ridiculous that you pay for a product you can't use properly and then have to pay for someone to fix it, which even then, might not work!
    If you haven't found a solution, we did find a way around the vaildation for Photoshop, Indesign, Illustrator and Bridge. At the validation screen if you click on the text to sign in as another user, it takes you to another screen. Resign in as the same user (yourself) and then it should let you access these programmes. Although you have to do it everytime you open it. Unfortunately we can't get it to work at all for Acrobat, it lasts about 2 seconds and then automatically quits.
    Cheers,
    Alaina

  • Address Book vCards via Bluetooth to Samsung a900 "Blade" cell phone

    I'm able to export Address Book contacts as vCards and then import them into one of the new Samsung a900 "Blade" Sprint phones using Bluetooth, but with a couple of vexing problems.
    1. I should clarify that I can import vCards into the new "Blade" cell phone from Address Book via Bluetooth, but only by dragging one card at a time, a very tedious process. Unfortunately, no data transfer occurs if I select multiple cards and drag them all at the same time. I'm using OS X (v10.4.2). Perhaps v10.4.4 and/or a more current AddressBook update will make a difference, or perhaps the problems are solely at the Samsung end...
    After activating the paired phone and then launching Apple's Bluetooth File Transfer Utility, I'm dragging the vCards onto the OS X dock icon...
    But before I do this, the "No Name" problem is forcing me to manually enter the Company Name into Address Book's last name field for every card that has no personal first/last name. Again, this is necessary just to get the Samsung a900's internal phone book to display something useful for these records (besides listing each record as "No name").
    2. When the phone software sees an entry with a Company Name only (but no First/Last Name entered), it goes brain dead and lists each entry as "No Name" instead of ignoring the empty Name fields and simply listing the Company Name. This is an age-old problem with dumb cell phone software (my previous Sanyo phone did this too). Unfortunately, Address Book exporting is useless without fixing this...Is there a way to get Address Book to format exported vCards to compensate for this shortcoming in the Phone interface?
    More info on this phone and Macs is posted on an a900-Mac thread in the Samsung discussion at www.sprintusers.com. The "Blade" is Samsung's new model that copies the look-and-feel of the popular Motorola RAZR, and it is a very nice, if not entirely original, design, and a very hot phone at Sprint right now. It does have a few bugs, but some already have been addressed with a firmware update from Samsung. It's only been out since late November or early December of 2005.
    I also cross-posted these questions in the Address Book and Mail forum...

    All metioned problems are Samsung's fault. Blame them.
    I've been assuming it was a Samsung problem, and have posted help requests in cell phone forums that Samsung engineers and/or support allegedly reads. I was hoping there might be some way to automate a workaround from the computer end...
    Now, if Address Book had an option to define the fields that are to be exported or perhaps automatically sub Company Names for last names the problem would be solved when exporting for cell phones. I can't belive no one has ever encountered this before -- it has been a problem with every cell phone I have ever owned.

  • Use "find my iPhone" despite pin lock

    Hi
    I lost my phone at a big party during the weekend. Now I would like to use "find my iphone" to locate it. Unfortunaly I have a pin lock, so if someone finds it, charges it, and starts it, it still wont go online so I can see it on the map.
    Does anyone have any tip on what to do?

    Anyone can restore the iPhone as new, which wipes everything off it and restores it to new-out-of-the-box settings.  At that point, there is nothing you can do to track it.
    Note that the suggestion to blacklist your IMEI is up to your provider.  In the USA, no cell service provider will blacklist an IMEI number - that is just not something they offer.  Nor will they be willing to track a device on their network, at least not without a court order to do so.
    About all you can do is contact your provider and be sure your account is cancelled so you have done your due diligence in informing them of the loss/theft of the device.  You can file a police report, which may allow you to make a claim on any insurance coverage you may have (home owners coverage, renters, whatever type you have).

  • HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

    So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

    In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
    Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
    Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

  • After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again , it's really frustrating , any solution ??

    After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again ,any solutions ?

    Hello kumarsenthil210317
    Check out the article below to start troubleshooting issues with touchscreen response.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Regards,
    -Norm G.

  • Is there an App to Manually, Fully Pin-Lock Screen?

    I always carry my phone in my pocket and the default drag-to-unlock screen isn't cutting it (answering calls in my pocket, unlocking itself). However, I don't want to always have to enter a pin to unlock my phone, only when I'm going to be biking with it in my pocket (which is at least twice a day). What I would like to see is an app that I can put on my taskbar that I could press once to put the phone in a true locked state that requires a password to unlock. I don't want it to be able to answer calls and I don't want it accidentally dialing emergency numbers either (this isn't a problem if the app allows sliding out the keyboard to access emergency numbers without a password). After the password has been entered, the app doesn't lock the screen again until it is manually loaded.
    Unless I'm missing something, the default screen locking options on the Veer (currently running webOS 2.1.2) can not be used in this way. Every time I want to turn the pin lock back on, I have to load the app, scroll down to the locking section, enter a pin to use, and then reenter the pin to use, which of course is way more time-consuming than just hitting a single button that retains your password.
    I know the seemingly obvious solution is to face the screen out in my pocket instead of toward my leg, but I've always put it screen-side facing in to protect the screen since I don't use a case. An ideal solution for me would be an app-based one.
    Thanks to anyone who can help! 
    Post relates to: HP Veer p160una (AT&T)

    Hello!
    HP understands that some features are not currently supported. I’ll make a note of the feature you mentioned and you can also visit the following website to request a feature: http://www.hpwebos.com/us/company/feedback.html. Customer input is an important consideration when we make enhancements and introduce new features. Typically, changes such as this are delivered automatically by our over-the-air update system.

  • Hey,  I don´t know why or what but while I was using my mac, the icloud locked my mac and now asking for a PIN lock with 4 numbers that I never set up before... What a need to do to fix it??

    Hey I just want to use my mac but I can´t sign up it because asking me for a PIN LOCK that I don´t have any idea...
    Case ID: 471327240

    If your Mac was locked with Find My Mac, you'll have to take it to an Apple store or authorized service provider to have it unlocked.  You will need to bring the necessary paperwork to prove that it is yours.  From http://support.apple.com/kb/TS4006:
    "Only Apple retail stores or Apple Authorized Service Providers can unlock computers protected by a firmware password, such as passwords set with Find My Mac.
    If you cannot remember the firmware password for your computer, schedule a service appointment with either an Apple Retail Store or an Apple Authorized Service Provider. If you plan to visit an Apple Retail store, make areservation at the Genius Bar (only available in some countries)."

  • How to mask out unwanted objects in locked-off shots in Prem Pro CS5.5

    hello,
    I have Adobe CS5.5 Master Collection.
    I am editing a short film on Prem Pro and on some of the locked-off shots where the camera doesn't move there are objects in shot, such as boom mic, that I want to get rid of by painting over them with what would be in the background (either by taking similar background from background nearby or by taking the background before/after the object moves into shot).
    I have no idea how to go about this or what software to use. Should/could I do it all in just Prem Pro or would it need to be done in After Effects and or Photoshop or a combination of some or all of these.
    If someone could point me in the right direction or recommend an article/articles or book to read to learn how to achieve this then that would be great.
    Thanks

    Hi,
    I have attached JPGs from 3 clips.
    Clip one had the mic visible to the left at the bottom of the shot and also at time the woman's leg goes behind it (example b)
    Clip two has a computer monitor just visible through the door at the bottom left corner of the shot.
    Clip three, set in park, has a crew member's coat-tie flapping in and out of shot. Example A without it in shot and example B with it in shot.
    Help on how to deal with these or advice on books to read to help would be much appreciated.
    Thanks

  • How do I get this lock off of my screen that displays on the left of my battery?

    Just want to know how to clear this lock off of my phone that displays on the left side my battery. I believe it hinders me from bringing my key pad up when trying to search for one. Unless it was something that I enabled.

    I'm guessing that the icon shows a padlock with a circular arrow around it.  That is orientation lock - prevents the screen from rotating.  To switch it off - go to Control Centre (swipe up from bottom of screen) and press the icon in that screen. Close Control Centre by swiping it down

  • No SIM card Installed – Insert a valid SIM card with no PIN lock to Activate phone

    How do i solve this problem?
    No SIM card Installed – Insert a valid SIM card with no PIN lock to Activate phone

    You do what the message instructs you to do and insert a Valid SIM with no PIN lock.

  • Why pass code lock off option has disabled in IOS 7.0.4

    After updating the ios 7.04 pass code lock off option has disabled,please help how to disable pass code lock off

    screen shot of above issue

  • My Iphone was not unlocked and i accidentally upgarded my phone. Now it asks me to get insert a SIM without a PIN lock and would only let me make emergncey calls. How do i get phone working ?

    My Iphone was not unlocked and i accidentally upgarded my phone. Now it asks me to get insert a SIM without a PIN lock and would only let me make emergncey calls. How do i get phone working ?

    You will need to establish an account with whoever the phone is locked with and restore it. Or you will not to unofficially unlock it again.

Maybe you are looking for

  • Where has Mozilla's open browser gone? Why is there going to be DRM in my Firefox?!

    What happened?! Why is this happening!? Can This Web Be Saved? Mozilla Accepts DRM, and We All Lose It's official: the last holdout for the open web has fallen. Flanked on all sides by Google, Microsoft, Opera and (it appears) Safari's support and pr

  • Storage issues for Proxies using Final Cut Server

    Hi there, we have a fairly high amount of material that is just being put into Final Cut Server to be archived again. I dont mind the Xserve being busy to create these proxy files, but they tie up too much space! (Maths: 500 GB / 40 h of DVCAM footag

  • Display blob field  on pdf  with pl_fpdf

    Hi All, I wish I could use some method to output PDF from the PL/SQL. I already have a document (image stored as BLOB). Now, I need to output this image in PDF. I know doing this outside database is easy and advisable. When I use pl_fpdf with image f

  • Hp desktop H5p74aar#ABA WINDOWS 8

    i am using a hdmi adapter plugged into the dvi port then cabled to my projector. The projector flashes on and off repeadly.  vga to monitor works great along with the dvi to monitor. is ths an issuewith windows 8 or hp video driver?   this is an  HP

  • Pictures in iPhoto not syncing with 3rd gen Nano

    Hi, I posted this in the iPod discussions area also but thought someone here may have the answer. Hi all. When I go to sync pictures in iPhoto to my 4gig 3rd gen Nano, not all the picture are recognized. One album with 30 pics in it, only 3 are synce