Wired 802.1x EAP-TLS Server Certificate Problem

I have setup wired 802.1x authentication using EAP-TLS with ACS 3.3 and backend link to Active Directory. Root CA certificates are installed on the ACS and Client PC. Machine certificates and user certificates are also installed on Client PC. A Server certificate is installed on the ACS. All has been configured as detailed on the Cisco Web Site (numerous documents).
If I set the client to authenticate the Servers certificate I get a failure. The clients log (Cisco Secure Services Client) states:
11:48:53.088 Validating the server.
11:48:53.088 Server list is empty, trusted server can not be validated.
11:48:53.088 Server list is empty, trusted server can not be validated.
11:48:53.088 The server certificate is invalid, the common name ACS-One.rotherham.gov.uk does not match.
11:48:54.776 Port state transition to AC_PORT_STATE_UNAUTHENTICATED(AC_PORT_STATUS_ERR_SERVER_TLS_CERTIFICATE_REJECTED)
11:48:54.776 The authentication process has failed.
If I look at the Auth log on ACS (set to full logging) it states:
AUTH 08/27/2008 14:09:04 I 0701 1492 AuthenProcessResponse: process response for 'paul.kyte@domain' against Windows NT/2000
AUTH 08/27/2008 14:09:04 E 0350 1492 EAP: TLS: ProcessResponse: SSL handshake failed, status = 3 (SSL alert fatal:bad certificate)
If I configure the client to not check the servers certificate it all works ok.
Can anyone tell me why my server certificate is getting rejected?
Thanks,
Paul

If Cisco Secure ACS runs on a member server and any user is to be authenticated using EAP-TLS, you must complete additional configuration in Active Directory of the domain containing Cisco Secure ACS. The username that you configured to run all Cisco Secure ACS services must also have permission to read user properties in Active Directory, else EAP-TLS authentication fails.

Similar Messages

802.1X EAP-TLS User Certificate Errors

I'm trying to implement 802.1x using EAP-TLS to authenticate our wireless users/clients (Windows 7 computers). I did a fair amount of research on how to implement this solution and everything seems to work fine when authentication mode is set to: Computer
Authentication. However, when authentication mode is set to "User or Computer" or just "User" it fails. I get a "certificate is required to connect" pop up and it's unable to connect.
No errors on the NPS side but I enabled logging on the client (netsh ras set tracing * ENABLED) and this is what I can see. It seems as if there is a problem with the client certificate:
[236] 06-04 09:26:35:704: EAP-TLS using All-purpose cert
[236] 06-04 09:26:35:720: Self Signed Certificates will not be selected.
[236] 06-04 09:26:35:720: EAP-TLS will accept the All-purpose cert
[236] 06-04 09:26:35:720: EapTlsInitialize2: PEAP using All-purpose cert
[236] 06-04 09:26:35:720: PEAP will accept the All-purpose cert
[236] 06-04 09:26:35:720: EapTlsInvokeIdentityUI
[236] 06-04 09:26:35:720: GetCertInfo flags: 0x40082
[236] 06-04 09:26:35:720: FCheckUsage: All-Purpose: 1
[236] 06-04 09:26:35:720: DwGetEKUUsage
[236] 06-04 09:26:35:720: Number of EKUs on the cert are 3
[236] 06-04 09:26:35:720: FCheckSCardCertAndCanOpenSilentContext
[236] 06-04 09:26:35:720: DwGetEKUUsage
[236] 06-04 09:26:35:720: Number of EKUs on the cert are 3
[236] 06-04 09:26:35:720: FCheckUsage: All-Purpose: 1
[236] 06-04 09:26:35:720: Acquiring Context for Container Name: le-8021xUsers-84adbdd0-a706-4c71-b74a-61a1bd702839, ProvName: Microsoft Software Key Storage Provider, ProvType 0x0
[236] 06-04 09:26:35:720: CryptAcquireContext failed. This CSP cannot be opened in silent mode. skipping cert.Err: 0x80090014
[236] 06-04 09:26:35:720: FCheckUsage: All-Purpose: 1
[236] 06-04 09:26:35:720: DwGetEKUUsage
[236] 06-04 09:26:35:720: Number of EKUs on the cert are 1
[236] 06-04 09:26:35:720: No Certs were found in the Certificate Store. (A cert was needed for the following purpose: UserAuth) Aborting search for certificates.
Also, in the event viewer I get the following:
Wireless 802.1x authentication failed.
Network Adapter: Dell Wireless 1510 Wireless-N WLAN Mini-Card
Interface GUID: {64191d46-0ea6-4251-86bb-7d6de5701025}
Local MAC Address: C4:17:FE:48:F2:79
Network SSID: *****
BSS Type: Infrastructure
Peer MAC Address: 00:12:17:01:F7:2F
Identity: NULL
User: presentation
Domain: ****
Reason: Explicit Eap failure received
Error: 0x80420014
EAP Reason: 0x80420100
EAP Root cause String: Network authentication failed\nThe user certificate required for the network can't be found on this computer.
I created user and computer certificates by duplicating the "User" and "Computer" templates in AD CS. I modified the "Subject Name" to "Build from Active Directory information". "Subject Name Format" is set to "Fully Distinguished Name" and "User
Principal Name (UPN) is checked. All other boxes are cleared. I verified that certificates for both user, computer , and root CA are all correctly auto enrolled. I also verified that the user certificate
exists in the "Personal" user certificate store on the client.
There is clearly something wrong with the user certificate but what? I'm at wits ends as I have tried everything. Please help!

Hey,
I am precisely in the same situation now. I have a win7 client with server2008R2(having AD, and DNS) with NPS running. I have certificate templates and auto enrollment configured. My Win7 machine is able to authenticate using its certificate but
when I use the user certificate it doesn't work. Both user/computer certificates are coming from the AD root CA enterprise. NPS has the right certificate. I have verified on client user/local machine , both have their respective certificates in their
personal stores.
I have tried all possible combination and even tried changing the key provider but no use.[6472] 12-10 13:39:04:327: Number of EKUs on the cert are 1
[6472] 12-10 13:39:04:327: FCheckSCardCertAndCanOpenSilentContext
[6472] 12-10 13:39:04:327: DwGetEKUUsage
[6472] 12-10 13:39:04:327: Number of EKUs on the cert are 1
[6472] 12-10 13:39:04:327: FCheckUsage: All-Purpose: 1
[6472] 12-10 13:39:04:327: Acquiring Context for Container Name: le-LM-USER-4aa6cf55-b6b7-491e-ad5b-735e44eaf3c7, ProvName: Microsoft Software Key Storage Provider, ProvType 0x0
[6472] 12-10 13:39:04:327: CryptAcquireContext failed. This CSP cannot be opened in silent mode. skipping cert.Err: 0x80090014
[6472] 12-10 13:39:04:327: No Certs were found in the Certificate Store. (A cert was needed for the following purpose: UserAuth) Aborting search for certificates.
[6472] 12-10 13:39:04:327: EAP-TLS using All-purpose cert
[6472] 12-10 13:39:04:327: Self Signed Certificates will not be selected.
[6472] 12-10 13:39:04:327: EAP-TLS will accept the All-purpose cert
I am stuck at it for last few days with no real cause known as yet.!
Any help will be thoroughly appreciated!!!

Airport 802.1x w/ TLS Authentication Certificate Problem

Trying to set up an Airport connection to my company's Wireless network.
I've gone into the Internet Connect application and tried to create a new 802.1x connection.
I named the connection, choose Airport as the port, provided my username and password, filled in the SSID, and tried to choose TLS as the authentication but got the following error:
"TLS can't be enabled because your keychain does not contain any suitable certifications..."
I had previously added the certificate the IT department had generated and is successfully using it with their Window's clients.
I can see the key in my keychain but cannot access it when trying to add TLS authentication.
They are using Microsoft Certificate Server to generate the certs.
Is there anything special I need to do in my keychain or with the cert to have it available for use with TLS.

I've set this up at home using Windows 2003 IAS & EAP-TLS. It took a little playing around to get it right, but here are the instructions I wrote for myself:
Mac;
http://certificateauthorityserver/certsrv
Download a CA Certificate, certificate chain, or CRL
Click Download CA Certificate
Double click certnew.cer and install it to the System keychain
Go back
Request a Certificate
User Certificate
2048, Submit
Install (downloads)
On Windows machine, view private store. Select export with shared key. Export p12 certificate. Import on Mac.
Go to Internet Connect configuration. Choose 802.1X and then TLS. Use the certificate assigned to the user.

802.1x EAP-TLS for wired users with ACS 5.5

Hi All,
We are configuring a new setup for wired users authentication with 802.1x(EAP-TLS). ACS 5.5 we are using as authentication server.
We have added the root CA(internal) certificate and certifcate for ACS signed by CA. Now We want to check the authentication is working or not . I hope both root CA and identity certifcate also we need to install in the laptops. But I am not sure how to download the certifcates for client machine manually from CA.
Kindly suggest on how to get certificates for clients both manually as well as automatically?
Thanks,
Vijay

Hi Vijay,
for the Wired 802.1x (EAP-TLS) you need to have following certificates:
On ACS--- Root CA, Intermediate CA, Server Certificate
On Client-- Root CA, Intermediate CA, User certificate(In case of user authentication) OR Machine certificae(In case of Machine authentication)
I am not sure which third party certificate are you using, If its in house Microsoft or any other certificate server then you need download the client certificate from the server itself.
In case of Microsoft, There will be a template for user certificate. You can select it and create user certificate
This one is an old document, But has steps to configure Machine certificate for the user, You can see the steps to download user certificate if its Microsoft server:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-server-windows/43722-acs-eap.html#wc-2
In case You are using the third party certificate serevr , Then you need to check with them on how to download the user certificate
Cheers
Minakshi(rate the helpful post)

Connecting iPads to an Enterprise Wireless 802.1x (EAP-TLS) Network Using Windows Server 2003 IAS

Hi there,
I am asked to deploy iPads on an 802.1x EAP-TLS WiFi network. The customer has a Windows Server 2003 IAS server providing RADIUS. There also is a Windows based CA infrastructure in place. This solution is in production and is already being used by other wireless devices. Could someone please highlight the configuration steps for the iPad deployment? The customer whishes to automate the initial deployment and the renewal of the certificates. I have a basic understanding of 802.1x, RADIUS, Certificates etc. in a Windows infrastructure but I am new to enterprise deployment of iPads. There is no MDM tool in place by the way...
I did find a Microsoft article which I think describes what needs to be done: http://blogs.technet.com/b/pki/archive/2012/02/27/ndes-and-ipads.aspx. This article basically states the following steps:
1. Create a placeholder computer account in Active Directory Domain Services (AD DS)
2. Configure a Service Principal Name (SPN) for the new computer object.
3. Enroll a computer certificate passing the FQDN of the placeholder computer object as a Subject Name, using Web Enrollment Pages or Certificates MMC snap-in directly from the computer (Skip step 4 if you are using the Certificates MMC snap-in)
4. Export the certificate created for the non-domain joined machine and install it.
5. Associate the newly created certificate to the placeholder AD DS domain computer account manually created through Name Mappings
The article then elaborates on specific steps needed for the iPad because it treats all certificates as user certificates. Can someone confirm this behavior??
Regards,
Jeffrey

Use VPP. Select an MDM. Read the google doc below.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
http://www.apple.com/education/resources/information-technology.html
business site is:
http://www.apple.com/lae/ipad/business/resources/
Excellent guide. See announcment post -- https://discussions.apple.com/thread/4256735?tstart=0
https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
good tips for initial deployment:
https://discussions.apple.com/message/18942350#18942350
https://discussions.apple.com/thread/3804209?tstart=0

802.1x eap-tls machine + user authentication (wired)

Hi everybody,
right now we try to authenticate the machines and users which are plugged to our switches over 802.1X eap-tls. Works just fine with windows.
You plug a windows laptop to a switchport and machine authenticates over eap-tls with computer certificate. Now the user logsin and our RADIUS (Cisco ACS) authenticates the user as well, with the user certificate. After eap-tls user-authentication the RADIUS checks if the workstation on which the user is currently logged in is authenticated as well. If yes = success, if no the switchport will not allow any traffic.
Now we have to implement the same befaviour on our MacBooks Pro. Here the problems start. First of all I installed user and computer certificates issued by our CA (Win 2008 R2). So far so good. Now I have no idea how to implement the same chain of authentication. I was reading countless blogs, discussions, documentations etc. about how to create .mobileconfig profiles. Right now im able to authenticate the machine, and _only_ if I login. As soon as I logout eap-tls stops to work. It seems that loginwindow does not know how to authenticate.
1) how do I tell Mavericks to authenticate with computer certificate while no user is loged in ? already tried profiles with
<key>SetupModes</key>
<array>
    <string>System</string>
    <string>Loginwindow</string>
</array>
<key>PayloadScope</key>
    <string>System</string>
but it does not work
2) How do I tell Mavericks to reauthenticate with user certificate when user logs in ?
Thanks

Unfortunatelly this documents do not describe how to do what I want.
I already have an working 802.1x. But the mac only authenticates when the user is loged in. I have to say that even this does not work like it should. If Im loged in sometimes i need to click on "Connect" under networksettings and sometimes it connects just automatically. Thats really strange.
I set the eapolclient to debugging mode and see following in /var/log/system.log when I logout.
Feb 20 18:39:09 MacBook-Pro.local eapolclient[734]: [eaptls_plugin.c:189] eaptls_start(): failed to find client cert/identity, paramErr (-50)
Feb 20 18:39:09 MacBook-Pro.local eapolclient[734]: en0 EAP-TLS: authentication failed with status 1001
Feb 20 18:39:22 MacBook-Pro.local eapolclient[734]: [eaptls_plugin.c:189] eaptls_start(): failed to find client cert/identity, paramErr (-50)
Feb 20 18:39:22 MacBook-Pro.local eapolclient[734]: en0 EAP-TLS: authentication failed with status 1001
this are only debugging messages I get. Looks to me like eapolclient is not able to find a certificate (?)
The certificates are in my System keychain.
Unfortunatelly apple also changed the loging behaviour of eapolclient, I dont see any eapolclient.*.log under /var/log
Any ideas ?

Cisco ISE for 802.1x (EAP-TLS)

I work for a banking organization and security is an area that needs to be improved continuously. I am planning on implementing Cisco ISE for 802.1x together with a Microsoft PKI for certificate issuing and signing.
I am currently trying to implement this in our test environment and I have managed to do a few basic bootstrapping tasks. I need someone to push me into the right direction as to how I can achieve what i am seeking.
I will use Cisco 2900 series switches on the access layer and a few HP switches as well which supports 802.1x.
I want to configure the ISE to process authentication requests using 802.1x EAP-TLS (Certificate Based). All the workstations on the domain needs to authenticate itself using the certificates issued to it by the Certificate Issuing Authority.
I have already managed to get the PKI working and have rolled out the certificates on all the workstations on the test environment. I can't seem to configure the Authentication portion on the ISE.
I request if someone can guide me or direct me to materials that can help achieve the above requirements. The guides available on the Cisco website are overwhelming and I can't seem to figure out how I am supposed to configure the authentication portion.
My email: [email protected]
Cheers,
Krishil Reddy

Hello Mubashir,
Many timers can be modified as needed in a deployment. Unless you are experiencing a specific problem where adjusting the timer may correct unwanted behavior, it is recommended to leave all timers at their default values except for the 802.1X transmit timer (tx-period).
The tx-period timer defaults to a value of 30 seconds. Leaving this value at 30 seconds provides a default wait of 90 seconds (3 x tx-period) before a switchport will begin the next method of authentication, and begin the MAB process for non-authenticating devices.
Based on numerous deployments, the best-practice recommendation is to set the tx-period value to 10 seconds to provide the optimal time for MAB devices. Setting the value below 10 seconds may result in the port moving to MAC authentication bypass too quickly.
Configure the tx-period timer.
C3750X(config-if-range)#dot1x timeout tx-period 10

802.1x EAP-TLS with Cisco IP-Phone on MS NPS

Hi,
does anybody get 802.1x - EAP-TLS with IP-Phones ( e.g. 7962G ) on Microsoft NPS up and running?
With ACS it is not a problem at all.
thx
Sebastian

Hi all !
Have you solved this problem (LSC certificate )? I am facing the same problem and I did not find the solution yet.
This is the last e-mail that Microsoft TAC has sent to the customer:
====================================================================================
As per the discussion, we need to engage Vendor on the case to find out why the CRL Distribution Point (CDP) and AIA paths are missing from the certificate. Ideally CDP contains that Revocation List of the certificates and AIA is used for building the certificate chain.
"Please find below some more information about the same from Microsoft TechNet Article :
CRL Distribution Points : This extension contains one or more URLs where the issuing CA’s base certificate revocation list (CRL) is published. If revocation checking is enabled, an application will use the URL to retrieve an updated version of the CRL. URLs can use HTTP, LDAP or File.
Authority Information Access : This extension contains one or more URLs where the issuing CA’s certificate is published. An application uses the URL when building a certificate chain to retrieve the CA certificate if it does not exist in the application’s certificate cache."
=====================================================================================
Tks for your help !!!!!!!
Luis

802.1x/EAP-TLS Fragmentation across VPN tunnel

I am having an issue authenticating users via 802.1x/EAP-TLS across an IPSec tunnel. I am using route-based VPN with SVTI configuration on a 2921 and 1941. I have the following settings defined:
- Under the tunnel interfaces:
- MTU 1390
- MSS 1350
- PMTUD
- Under the ingress LAN interface
- route-map to set the DNF bit to 0
- On the RADIUS Server (2008 NPS)
- Framed-MTU: 1300
This had been working for months until I got a call last week about users not being able to authenticate to our secured SSID. I fired up wireshark and also used my client monitor tool in my wireless NMS to watch what is going on. I see all of the access-request and access-challenge exchanges, but the final exchange never happens. In both captures you can see messages with id's 77-81, but message id 82 isn't shown in the wireshark capture, only fragments are. In the client monitor capture you can see that message id 82 is 1726 bytes in length. Now, if I capture packets on my local LAN, the 1726 byte packet is properly fragmented and users can authenticate just fine.
What am I missing with this?? I have scoured the Internet trying to find a setting that I must have missed, but I can't. I've tried adjusting the Framed-MTU, all the way down to 1100.
Thanks for you help.

I figured I would post back with my results. I ended up removing my mtu value from the tunnel interfaces and then fired up wireshark again. This time I found a crap load of ICMP time-exceeded messages which told me that PMTUD is not working properly across the tunnel. From there I simply re-applied my previous MTU numbers back into the tunnel configs and all of the sudden EAP-TLS started flowing fine. I do not know why removing and re-applying the MTU would make things start working again so I assume that I'll be dealing with this again sometime in the future.

Cisco ISE: 802.1x [EAP-TLS] + List of Applicable Hot-Fixes

Dear Folks,
Kindly suggest the list of all possible Hot-Fixes required for the Cisco ISE EAP-TLS solution... We have applied 9 HotFixes so far. But, still the connectivity is intermittent. Is there any list for all applicable Hot-Fixes?
OS = Win 7 SP1 (32/64 Bit) and Win 8
Thanks,
Regards,
Mubasher Sultan

Hi Mubasher
KB2481614:      If you’re configuring your 802.1x settings via Group Policy you’ll see      sometimes EAP-PEAP request from clients in your radius server log during      booting even if you’ll set EAP-TLS. This error happened in our case with      1/3 of the boots with some models. The error is caused by a timing problem      during startup. Sometimes the 802.1x is faster and sometimes the Group      Policy is, and if the 802.1x is faster than the default configuration is      taken, which is PEAP. Which lead to a EAP-NAK by the radius server.
KB980295:      If an initial 802.1x authentication is passed, but a re-authentication      fails, Windows 7 will ignore all later 802.1x requests. This hotfix should      also fix a problem with computers waking up from sleep or hibernation –      but we’ve disabled these features so I can’t comment on them.
KB976373:      This hotfix is called “A computer that is connected to an IEEE      802.1x-authenticated network via another 802.1x enabled device does not      connect to the correct network”. I can’t comment on this, as we’ve not      deployed 802.1x for our VoIP phones at this point.I would guess it is the      same for Windows 7 too. The linked article tells you to install the patch      and set some registry key to lower the value.
KB2769121:      A short time ago I found this one: “802.1X authentication fails on a      Windows 7-based or Windows 2008 R2-based computer that has multiple      certificates”. At time of writing I’m not sure if it helps for something      in my setup. According to the symptoms list of the hotfix, it does not,      but maybe it helps for something else, as the one before does.
KB2736878:      An other error during booting – this time it happens if the read process      starts before the network adapter is initialized. Really seems that they      wanted to get faster boot times, no matter the costs.
KB2494172:      This hotfix fixes a problem if you’ve installed a valid and invalid      certificate for 802.1x authentication. The workaround is just deleting the      invalid certificate. I’m not sure at this point if it affects also wired      authentication.
KB976210:This      problem occurs only during automated build processes and if you use an EAP      method which needs user interaction – as I don’t do that I can’t comment      on this hotfix.
For more information please go through this link:
http://robert.penz.name/555/list-of-ieee-802-1x-hotfixes-for-windows-7/
Best Regards:
Muhammad Munir

User auth fails using 802.1x (EAP-TLS)

I'm currently testing 802.1x machine and user authentication using EAP-TLS. Right now I'm testing them separately, and machine auth works great, but user auth doesn't.
Here's what I'm using:
Smart Cards ->
Built-in Microsoft XP supplicant ->
Catalyst 4006 Switch ->
Cisco Secure ACS 3.3 ->
Microsoft Active Directory
After I log in using the smart card, an EAPOL message from the computer is sent to the switch, and the switch replies asking for the computer to identify itself, but the computer does nothing. The switch continues asking and finally gives up because of no response. The ACS server logs no traffic from the supplicant.
Is this a supplicant issue? Using PEAP MSCHAPv2 with secured passwords works fine, but not with certificates.

I found my answer. The problem was with the Microsoft supplicant. It wasn't prompting me to type in the PIN to unlock the smart card, so it couldn't read the certificate and thus the EAP process was timing out.
In order for the Windows supplicant to prompt the user for the smart card PIN, the "Show icon in notification area when connected" checkbox in the Local Area Connection properties windows must be checked. They may want to think about renaming that box... :-)

ISE 802.1x EAP-TLS machine and smart card authentication

I suspect I know the answer to this, but thought that I would throw it out there anway...
With Cisco ISE 1.2 is it possible to enable 802.1x machine AND user smart card authentication simultaneously for wired/wireless clients (specifically Windows 7/8, but Linux or OSX would also be good). I can find plenty of information regarding 802.1x machine authentication (EAP-TLS) and user password authentication (PEAP), but none about dual EAP-TLS authentication using certificates for machines and users at the same time. I think I can figure out how to configure such a policy in ISE, but options seem to be lacking on the client end. For example, the Windows 7 supplicant seems only able to present either a machine or user smart card certificate, not one then the other. Plus, I am not sure how the client would know which certificate to present, or if the type can be specified from the authenticator.

Hope this video link will help you
http://www.labminutes.com/sec0045_ise_1_1_wired_dot1x_machine_auth_eap-tls

Validate Server Certificate Problem

Hi all.
We have this problem with EAP-TLS with WPA and certificate authentication.
With a third part client (odissey) all work well, with integrated microsoft client all work if we deselect "Validate Server Certificate" into configuration.
In trusted server list there is our CA server.
But when we select this option (or if we try to connect to wifi network for the first time), authentication fail.
It's an annoying problem, because Windows XP default this option, so for an end user it's difficult to connect (he need to enter in network configuration.... we want a simple connection...).
Thank a lot
Daniele

Try this link
http://cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a0080545a29

EAP-TLS machine authentication problems

Well..
I have the following devices:
WCS
Wlan controller 4402
AP 1130 LWAPP
Workstation XP sp2
Secure ACS 4.0
Windows CA
Windows AD
Everything else is working properly, except EAP-TLS. Server certificate is installed in ACS and trust list is OK. Client certificate is installed in workstation machine store. PEAP-MsCHAPv2 working OK, ACS logging prompts successful authentication. I tried to use the certificate authentication from windows wlan properties, but the log was still empty.
Which clarifications do I have to do in ACS and AD?
Can someone help me and give me very detailed instructions on how to make it work.

Hi,
We had a same problem until we ran 2 windows hotfixs. Those are: WindowsXP-KB893357-v2-x86-ENU.exe and WindowsXP-KB890046-x86-ENU.exe Have you tried to do this. Our EAP-TLS machine authentication is working fine now.
Have you enabled EAP-TLS authentication in ACS? ACS-> System configuration: Mark Allow EAP-TLS

EAP-TLS User Certificate Question

I've setup a test ACS server and have everything functioning correctly including the WLAN. However, is there anyway for EAP-TLS to use ONLY the machine certificate and not the user certificate? We are not currently setup with per-user certificates. I'm guessing not on this... My primary question then is with User Certificates, how do you handle the following scenerio:
I have many CoW's (computer on wheels) through out the hospital that nurses use for inputting patient information. They all have a simple generic username/password (BADDD!!!!) so with this user it won't be hard to have default_user certificate install on the machines. But what if Doctor X decideds to walk up to one of these CoW's and wants to logout and log back in with his user/password on a machine he's never used before. How do we handle making sure he's able to connect if doesn't already have a cert on this computer? I'm quite mistified by this.
Thanks
-Raun

If you are using the MS Supplicant, you need the following registry settings:
"HKLM\SOFTWARE\Microsoft\EAPOL\Parameters\General\Global\AuthMode", 2, "REG_DWORD"
"HKLM\SOFTWARE\Microsoft\EAPOL\Parameters\General\Global\SupplicantMode", 3, "REG_DWORD"
This forces it to only use hardware certificates and sets the authentication to do the correct RFC polling.
As for the other issue, MS CA user certs do not "roam". Yet. There is discussion of roaming credentials being in Windows 7, but not entirely what that means. Roaming certificates can be easier with a product like Venafi. There "Encryption Management" tools are certificate management suites. The do have roaming management, or at least did when we talked to them.
Oh, and if you use two CAs (hardware and user), the separation keeps it straight too.

Wired 802.1x EAP-TLS Server Certificate Problem

Similar Messages

Maybe you are looking for