Wired comp losing connection every ten or 15 seconds

my wired connection drops every 15 to 20 seconds   wireless on other comp works fine  help me please  thanks.I have a hp comp desktop nd a dell  the hp keeps dropping  it is the one wired to a netgear modem/router  cg3000dv229. if that helps

I'll see if I can help you resolve your wired LAN issue.
What model is the PC? 
Without knowing the model we can check some basics first:
Have you updated the PC to Win8.1? 
If so, have you checked for an updated Network driver? 
You can check for updated drivers at hp.com on your product support page
OR 
Manually run Windows Update and see if there are any Recommended/Optional updates - that is where you will find HW driver updates for your PC.    
It looks like you have a DOCSIS 3.0 Gateway so there aren't any Firmware updates (updates are normally pushed from your ISP). 

Similar Messages

  • Why does my mouse keep losing connection every minute

    why does my mouse keep losing connection every minute, its not the batteries

    I'm having the same issue.  Every so often it loses connection then re establishes. This goes on repeatedly.
    If you change batteries while the computer is still active then it takes for ever to re connect.
    Can't wait until someone replies to your question.

  • Apex admin user losing connection every a few second

    Dear all,
    I logon with apex admin user on Apex 4.0.
    Admin user losing connnection every few second, and I must reconnecting every few second.
    Developer users on apex losing connection too. But user whose connecting on apex aplication with database users, don't losing connection!
    Anything at all is not change on server where is installed apex, and on database server.
    It has happened in last month.
    Did anybody have similar problem?
    Thanks in advance.
    Borjana

    Aarkoub wrote:
    Hello, 
    Sins I have updated my firmware to Firmware Version: 1.5.02 + the router is unable to keep the internet connection alive. I have restart the the router every few minutes or release and renew the DHCP configuration ( IP and DNS settings)
    Restarting the modem en than the router
    Resetting the router
    resetting the router to factory defaults settings
    connecting a computer directly to the modem works fine. The problem is the router. 
    Dose anybody have a solution
    PLEASE HELP
    After upgrading the firmware, did you reset and reconfigure the router? Possible reasons for encountering this kind of problem are firmware issue or ISP having intermittent connection. You mentioned that you already check the connection behind the modem and its working fine. If the firmware is already updated, reset and reconfigure were done. Then I suggest for you to call Cisco technical support for this, might be the router is defective. Check if they can still replace your router. Just let them know that troubleshooting steps were already exhausted.

  • Keep losing connection every 15 minutes

    As the topic say, I keep losing connection about every 15 minutes, which has been ongoing
    for more than 24 hours. This is starting to get on my nerves, I'm running a business and every
    time I get cut out, I lose a lot of money. BT Infinite suppose to be relyable and stable
    and here I am with this flashing modem, paying 45 pounds a month for this **bleep**. This is not the
    first time this is happening, what the F are you going to do about it? 
    I would like to cancel my contract before it runs out, since you are not delivering what promised.
    Im relying on a stable connection.
     Very annoyed customer

    are you a business broadband customer?  if so you need to post here as this is a residential forum  https://business.forums.bt.com/
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Access point --- Internet losing connection every 5 minutes....

    i have a wrt54g v6 router and a wmp54g both current drivers and firmware from the linksys website. i am frequently losing connection between router and internet. i've lowered my mtu, i've forwarded ports, reinstalled card in all 4 pci slots, i've literally done everything i know possible to do. i sat on the phone for 4 hours waiting on a linksys technician before my phone died friday trying to get ahold of someone for some help. resetting the router doesn't seem to help at all. the connection loss time is random aswell. sometimes it's for minutes sometimes it's for 10 seconds, but when you're playing online games that's all it takes to disconnect you. i've been going absolutely crazy trying to fix this so if anyone has any idea's i would be ever so greatful.
    pc specs
    windows xp pro sp2
    2.0ghz amd 2400+
    nvidia 6600 agp
    1gb corsair pc2700
    160 seagate hd

    First off all i don't suggest to play online games on wireless since as we all know wireless is such an unstable media for connection.
    Can you tell me the distance between the computer and the router. Also what is in the direct environment of the network.
    Are you using a 2.4 GHz cordless phone. This device is can cause intermittent internet connection on wireless networks
    we still have to isolate the problem just in case something else is causing your problem.
    "Give them nothing... But take from them everything..."
    -Leonidas "300"

  • Losing connection every monring

    Hi
    Each morning for the last five, I go to connect and get the message (server not found)
    All ligts are on the hub and I have the same problem with all wireless devices (leptop, phone, desktop)
    Have call the Call Centre and been advised to factory reset the HUB - guess what - it didn't work
    Any ideas, as getting a little tired of resetting hub every morning
    Jo

    Probably something interfering with your wireless signal. Try connecting with an Ethernet cable and see if the problem is still there.
    Have you tried changing the wireless channel on the home hub?
    Which version of the home hub do you have?
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Wired mouse losing connection

    I use an Evoluent wired mouse. In the past week (since last update?) the mouse has gone dead for no apparent reason, could be after a couple of minutes inactivity or longer. If I remove the usb plug and plugin again it works.
    Any one come across this with wired a mouse?
    This has happened three times today already, very annoying.

    It could be just that the driver is incompatible with the update. Try going to the manufacturer's website for an update driver, or at least an acknowledgement that they're working on a solution.

  • Windows 8 keeps losing connectivity

    Hi, not sure if this is unique but for the past few weeks Windows 8 has been losing connectivity every few minutes when browsing web pages, playing games etc. I am sure it's windows 8 as I have another work laptop using XP that I can be on all day via a
    VPN and that does not drop at all (it would normally drop within a few seconds of losing connectivity). I've done a lot of searching on the net for the same issue, others seem to be having similar things happen such as slow speed but can't find anything that
    matches, hence this separate question.
    I have also tried swapping routers to no avail. The thing is, you wouldn't know anything had happened from the network connectivity. Suddenly a page won't load. The wireless connectivity at the bottom right of the screen shows a full 5 bars (not limited
    connectivity). The way to get it back again is to leave it for a few minutes or disconnect from the router and reconnect again. Even whilst typing this I have had to do that twice.
    I'd appreciate some suggestions!
    Many Thanks, Paul.
    PS... IPCONFIG/ALL shows...
    Microsoft Windows [Version 6.2.9200]
    (c) 2012 Microsoft Corporation. All rights reserved.
    Wireless LAN adapter Local Area Connection* 17:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft Hosted Network Virtual Adapter
    #3
       Physical Address. . . . . . . . . : 56-DE-2B-64-0B-25
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Wireless LAN adapter WiFi 2:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Qualcomm Atheros AR5B125 Wireless Network
     Adapter
       Physical Address. . . . . . . . . : 74-DE-2B-64-0B-25
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 192.168.0.4(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : 11 May 2013 10:31:15
       Lease Expires . . . . . . . . . . : 12 May 2013 10:31:21
       Default Gateway . . . . . . . . . : 192.168.0.1
       DHCP Server . . . . . . . . . . . : 192.168.0.1
       DNS Servers . . . . . . . . . . . : 194.168.4.100
                                           194.168.8.100
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Local Area Connection:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetLink (TM) Ethernet
       Physical Address. . . . . . . . . : DC-0E-A1-07-A8-F0
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{A319BEA5-A55C-4E0C-AF67-922BEBD4C7BB}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 13:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv6 Address. . . . . . . . . . . : 2001:0:9d38:953c:3483:1732:adda:66e3(Pref
    erred)
       Link-local IPv6 Address . . . . . : fe80::3483:1732:adda:66e3%14(Preferred)
       Default Gateway . . . . . . . . . : ::
       DHCPv6 IAID . . . . . . . . . . . : 436207616
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-28-39-CC-DC-0E-A1-07-A8-F0
       NetBIOS over Tcpip. . . . . . . . : Disabled

    Hi,
    Does this issue occur with both wireless and wired?
    I suggest to perform these tests to troubleshoot the issue:
    1 Update NIC card for your machine
    2 Temporary disable firewall and antivirus program
    3 Logon with Safe Mode with Networking
    4 Update framework for your router.
    Leo Huang
    TechNet Community Support

  • Losing Connection with WRT54GS

    Hi All,
    First off I apologize if this concern has been noted and solved elsewhere on these boards. I recently moved into a new apt with a friend, we went with Comcast for our cable/internet set-up, and upgraded internet. Since I have a cable wire in my room we set-up the Comcast modem in there, as well as the new WRT54GS router I bought from Linksys, with the speed booster, not sure if that makes a difference. My friend is connecting through the router with a USB G card (also speed booster). Everything was working fine for the first 8-10 hours, the connections and hook-ups are all correct, but in the last 48 hours I have found that I have been losing my internet connection (I’m wired to the router). The linksys software has been diagnosing this problem as “Another network detected” and basically telling me that I am no longer connected to my router. In short, to fix the issue all I have to do is unplug the router, plug it back in, and wait 15 seconds and I’m back online. Obviously this isn’t a huge issue but it is getting rather annoying, especially since it seems to go offline every 2-3 hours after I fix it with the same issue. I have called linksys but was unable to get anyone the first time, so before I try again I was hoping that perhaps someone on these boards had a similar issue, or could at least tell me the direction to take, if its most like a router issue, or perhaps Comcast issue, in that maybe my wiring or modem is causing the problem. There are several other wireless networks in the area, I’m not sure if it could be an interference issue as well. The peculiar part is that my roommate has not lost his connection during my down time….
    Thanks in advance for your help
    Regards
    EMS

    I'd like to see some input on this one as well.
    I have the WRK54G and it is doing the same thing, it started about 3 weeks ago losing it's connection every 2 or 3 hours.
    I just reformatted my system (for an issue not related to the router obviously) and now it's losing connection every couple of minutes then reconnecting.
    The Linksys connection software won't even let it connect, but the default windows software will at least let it connect for a little while, it's getting pretty frustrating.
    I've had to wait for it to reconnect 3 times just while typing this.Message Edited by Douglajl on 03-20-200702:56 PM

  • Apple magic mouse keeps losing connection with Macbook pro

    I have a 2012 macbook pro, after upgrading to Mavericks(10.9.1, not have any other 3rd party software,just pure OS X), my magic mouse always losing bluetooth connection suddenly every one or two days. When losing connection, I found the bluetooth chipset type showing in macbook system information changed to unkown (FFFF). I have contacted with apple global support, and also have not gotten the solution. Just cleaning cache, and ect. but still didn't work.
    When I downgrading the OS X to 10.8.5 Mountain Lion, same macbook, same magic mouse, work very well. Never happened lose connection issue during one and a half month.  So, it should be a Mavericks bluetooth driver's issue, or something reletived.
    Any body have some good idea in solving this issue?
    Thanks in advance!

    I have the same problem with a 2007 MacBook Pro on Snow Leopard. As soon as I changed the mouse's batteries, it started losing connection every few seconds. The mouse came with Energizer batteries originally - they supposedly don't fit well, but the mouse worked fine. I exchanged them with Duracell, which gave problems. Now I have Varta batteries installed, they give problems too. The paper-trick doesn't work for me.
    Quite franky, I think it's rediculous that a fancy €69,- wireless mouse is so fussy about batteries. It's impossible to work with it. Is this just another way for Apple to get people to buy their batteries? I think a mouse this expensive should accept any and all batteries. Please, Apple: fix it. Seems like a really simple matter. Just put longer and stronger springs in the contacts for the negative poles.
    Thanks.

  • Mac Mini Connected to TV Causes Blank Pauses every ten minutes

    I hope someone can help with a small but frustrating issue I'm having.
    I have a Mac Mini (2011) hooked up to a new 1080p television. The mini goes via HDMI straight to the TV, no adapters. The mini is also connected to a regular computer monitor simultaneously, set to mirror.
    Until this week, I had an identical setup with an older, smaller hd television, where the mini was connected to the TV with an HDMI -> DVI adapter and also to the same second monitor. The TV was off most of the time, I only turned it on to watch a movie off my hard drive or whatever.
    Here's the problem: When the new TV is OFF, every ten minutes or so with the monitor goes blank and resets, as if someone unplugged the HDMI connection and then plugged it back in the quickly. While this happens the Mac is frozen for about 5 seconds. I can reproduce the same effect by actually unplugging the HDMI wire. It is also the same pause that happens when I change the monitor and TV displays from mirroring to non-mirroring (side-by-side).
    This only happens when the TV is off. If the TV is on, there is no issue.
    I'd like to be able to sit at my desk using the monitor without the TV screen on, as I was able to do with my older television. I never had this problem with that TV over many months.
    Is there any kind of setting change that might help?
    I'm guessing the TV being off causes the HDMI connection to be occasionally lost and then the MAC resumes/redetects the TV, triggering the display to reset, but I think it is odd that this only happens after the thing has been off for ten minutes (and then repeats regularly). I've fiddled with the power options and energy saving settings on the TV, none of them seem to have any effect. Is there anything I can do on the Mac side? The only other option I can think of is to actually unplug the TV when I'm not using it, but that would get old fast.
    Any advice would be appreciated. I've tried turning off mirroring, turning the TV off while not having the HDMI input active at that moment, and turning off all power saving options on the TV. I expect this is more a "tv problem" than a Mac problem, but it can't hurt to ask.
    Brett

    I couldnt get it to work even though I tried disconnecting an connecting the modules again. When I replaced the 4gb modules with the ones that came with the computer it started working perfectly.
    Does this mean that one of the modules might be damaged? I am going to try connecting one of the factory ram and one of the ones I bought to see which is the one that doesn't work and see if I can replace it.
    Thank you so much

  • Wrt610n losing internet connection every 2 days

    I've just received a wr610n v1 as a warranty replacement for an older linksys router.  It works fine normally, but every day or 2 I lose the internet connection on it.  My cable modem (20Mb/s) shows a few blinks on the 'ethernet' & 'send' lights, but nothing on the receive light.  Renewing the ip in the linksys config pages kicks it into life again, and it's fine for another day or 2.  Anyone else seen similar behaviour?

    Again, fidding around with the wireless settings is not going to make a blind bit of difference - the wireless remains working fine throughout.  The problem is with the connection from the router to the modem.  When that goes down, internet is obviously lost on wired & wireless, while connections behind the router (wired-to-wired, wired-to-wireless, wireless-to-wireless) all remain working fine.

  • Wireless losing connection to wired network and lan

    I have a customer that has an 871W ISR. They are using WEP encryption and a mix of b and g cards. Recently they have started losing connection to all of their wired network resources and the wan, but they don't lose association with the 871W itself. They show excellent signal strangth and keep their IPs. A reboot of the router immediately fixes the problem. There seems to be no pattern or common event that triggers any of this. Anyone else seen this problem before? It started happening after I did a sh tech and the router locked up halfway through it, so I had to reboot. I've reloaded the image thinking that may fix the problem and it has not.

    You can clear the interface statistics on the Detailed Status tab, and let traffic run for a time, then refresh the statistics. The ratio of errors to good packets sent and received should be better than it was prior to the test.

  • Losing connection to wireless network every week

    I really don't understand why this keeps happening. I have a PC (Windows XP) connected to a cable modem. I also have a WRT54G wireless router connected to the modem, following instructions on the CD-ROM that came with the router.
    Across the room, about 8 feet away, I have another PC (Windows XP) with a Compact Wireless-G USB Network Adapter with SpeedBooster model WUSB54GSC installed in one of the computer's USB ports. Again, I followed installation instructions on the supplied CD-ROM and things came together and I was able to connect to the internet through the wireless router.
    A week later, the 2nd computer lost it's connection with the router, so I tried "repairing the connection" but that didn't work. I ended up uninstalling the software and starting over. This time it worked, but the connection was "connection 2."
    Every week, usually on Sunday, I seem to lose my connection with the router and now I am up to "connection 6." Other people I have spoken with say they never loose their connections and the folks at Road Runner think it must be a problem with the router. Who knows? I wouldn't be surprised if I set it up incorrectly and have probably confused it with all the uninstalling and reinstalling I have done.
    Any suggestions? When it does connect, it works fine. I just don't understand why it keeps losing it's connection every Sunday.
    Thanks for any help/advice anyone can offer.

    Sounds like you are not connecting to the correct network.  Let say you called your network ORLANDO.  You should see ORLANDO in view your network connections. Also, if you would click on view workgroups computers, you should see all your computers listed.  You will have to log on to your router and make sure everything is set up properly.  XP default is MSHOME.
    I have had my share of problems using WUSB54GC on my windows 98 se.  No problems with XP sp 3 using identical adaptor.  I am been at this for a couple of months.  Usually unpluging adaptor and repluging it will solve the problem.  No problems using XP. I have even switch adaptors on both computers.
    Greetings from Northern Ontario, Canada

  • So i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?

    so i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?

    It means you should take it to the Genius Bar. You will no doubt need to buy an out of warranty replacement.

Maybe you are looking for

  • Postback and Alert position

    Hello, I'm new to JSF so this is probably a silly question. I'm developing a web-app in Netbeans using the Woodstock library, and I'm having difficulty using the Alert component. To be exact, I want to implement a 'basket' functionality where the use

  • Characters in a message with E6 Belle

    Dear Users, I have updated my E6 to Nokia Belle, I notice that I'm not able to know how many characters used for a message in both languages (Arabic & English), Awaiting for your reply, Regards Solved! Go to Solution. Attachments: 14022012008.jpg ‏32

  • Payment Notices

    Hi, In customer master- cmany code data - corrospondence tab - Payment notices to - There are different checks like customer with CI or w/o CI, Sales, Accounting , Legal Deptt etc. As per SAP explanation by putting chk on these columns system will cr

  • 10.4.7 problems: USB, Firewire, Bluetooth and mounting images

    After installing the 10.4.7 update and getting the checksum error: • USB devices wouldn't mount (though I could see them in System Profiler) • Firewire devices wouldn't mount (though I could see them in System Profiler) • Apple Bluetooth keyboard and

  • IPad mini retina, iOS 7 unable to join Personal Hotspot

    I have iPhone 5, iPad mini retina running on iOS 7.1.2, Laptop Windows. When I turn on Personal Hotspot (PH), other PC, Tablet,.. suppose to join the PH normally via Wifi, Bluetooth, Cable. But I found that after my iPhone join a 5GHz band wifi, and