Wired computer on WET200 cannot talk to wireless computer on WRV210
I have a computer (static IP: 192.168.1.12) wired to a WET200 bridge (firmware: 1.0.13).
The WET200 (192.168.1.99) is connected wirelessly to a WRV210 router (firmware: 1.1.16).
The router is the internet gateway (192.168.1.2).
A computer connected wirelessly (DHCP) to the router cannot see any computer connected to the WET200 bridge or the bridge itself.
The wired computer on the bridge can ping the wireless DCHP computer, but that computer cannot ping the other.
All computers can connect to the internet.
Why?
Never mind.
Firewall issue.
Similar Messages
-
I switched computers. New one runs Windows 8.1, 64 bit. I authorized it in iTunes. I am unable to see any of my library. I cannot unauthorize my old computer, as it died--hence the new one.
I have only been running iTunes for a very short time, so it was not backed up. I know my library is toast. I can recreate that. But I should still be able to recover my purchased songs. There is only music involved, no movies or other media. Still have an answer? Thanks.
-
My daughter will be leaving for college. Can she access our account on her computer and sync her ipod to that computer?
She cannot sync to that computer unless she has access to it, or is on the same wifi subnet as it is.
I think you mean can she access your iTunes account from another computer? As long as she has your AppleID and password, she can access your accounts in iTunes so you can continue to share purchased products.
I imagine she will want her own iCloud accounts and iMessage accounts, so you and she are not sharing the same emails, contacts, messages and so forth. To do that, just have her create her own AppleID to use when creating her iCloud account and her iMessage login account. These services are completely separate from the iTunes or App store, so having different AppleIDs for purchased content and other services is fine on a device (lets your family share purchases, but keep everything else separate). -
My Magic Mouse is frozen. How do I get it to work again? Also I keep getting a window that says it cannot locate my wireless mouse. I do not have a wireless mouse.
Got confused between your header question about a wired mouse and the main question about a wireless mouse. You said your magic mouse was frozen and added you do not have a wireless mouse. Problem is ... the magic mouse is wireless. The original mighty mouse was the corded version.
The wired mouse is a regular problem. After two to three years it tends to clog up. You can clean it (to a degree) as follows.
Using an alcohol moistened, not wet, cotton bud, scratch at the mouse ball for a minute or so. Then turn it upside down and on a clean piece of thick white paper or card on a firm surface, vigorously rub the mouse ball on the paper in a regular figure of eight. Do this for a minute or so and occasionally tap the mouse on the paper. This will help dislodge bits of fluff etc. Then try again -
How can I home share between a wired and a wireless computer
how can I home share between a wired and a wireless computer? I have no problem linking wireless devices, but cannot set up homeshare with a wired PC.
Maybe you want to describe exactly what you have and what you want to do.
-
What do I do if my ipod touch was turned off while it was updating to the new IOS? I cannot get it to turn back on or talk to the computer. It either shows the start apple screen or a blank white screen.
to all who have taken the time and effort to read my post....thank you. I was certain last night that I would be taking my Macbook into the Apple Store 7 hours drive from my location. I last used it with an Ethernet connection last night. I am up eary and I just turned it on and the WiFi is working again. ?? ???? ?? I have no idea.
Thanks to the firt person who replied especially and gave some suggestions. I am going to take it in to an Apple store in Toronto soon and leave it with them fo a couple of days. (I even deleted my VPN and it is a paid suscription). -
my apple mac g5 needs rebooting due to me clearing the whole system, however the tower nolonger recognizes the wired keyboard,
so i cannot use the c key to boot from disk.By rebooting do you mean reinstalling the Mac OS?
You may have to use another keyboard (preferably an Apple one) but also make sure the basics are correct, such as solid connection, not using a USB hub for the keyboard etc. Also plug the keyboard into the back of the G5 (not sure why this works but it does). -
Questions: cannot connect via wireless laptop (router WR...
Questions:
cannot connect via wireless laptop (router WRK54G)
cannot secure my network using WEPfrom the wired computer , access the router using http://192.168.1.1 . the default password is admin
on the router ui , click on the "wireless" tab , change the ssid - any non-linksys name , channel - 11 , ssid broadcast - enabled
go to the "wireless security" subtab .. change the security mode to WEP - 64 bits , default transmit key - 1 , enter a 10 digit hexadecimal number in the WEP key 1 field , passphrase - empty
under the "advanced wireless settings" , change the beacon interval - 50 , Fragmentation threshold - 2304 , RTS threshold - 2307 -
E4200v2 Bridge mode, cannot view/ping wireless devices
Hi everyone,
I currently have 2 e4200 wireless routers. The first router is connected to 3 devices via ethernet, and the 4th port is connected to my other e4200v2 which is set as bridge mode. The main router is at one end of the house, the second bridge mode router is at the other end.
My wireless devices are connected to the main e4200v2, along with all the wired clients.
Here is the problem: When wirelessly connected to the 2nd e4200 (the bridged one) I cannot connect to or ping any wireless clients that are connected to the main router. (For example, in my bedroom I am connected with my computer to the 2nd bridged router, and I am trying to ping my other computer that is wireless connected to the main router. I am unable to ping to this computer. When I am conected wirelessIy to the mian router, than I am able to ping the other wireless computer on the same router. Note:I am able to access any hard wired devices to the main router, regardless of which router I am connected to. The issue only appears to be when trying to connect to a wireless device that is connected to a different router than the device I am connecting from.
Both routers are setup on the same subnet mask with firmware Ver.2.1.39.145204
Any suggestions or help is much appreciated, as I've been trying to figure this out for days.
Thanks,
ChristopherI absolutley understand, and I appreciate your time.
I think I may have found the issue. I am not sure why this would affect my situation, but the bridged router had 2 different DNS addresses than the main router. Once I set them all to (8.8.8.8 & 8.8.4.4) it worked! -
Cannot connect a new computer with vista
Hi !
I have the wireless router WRT54G and I am currently using a computer with Windows 2000 to connect to the router. The router works perfectly with this computer. However, I bought a new sony computer with windows vista. This new computer recognizes the router and is connected to it. However, when I open the explorer and cannot go to any web page. Can anybody help me out with this? Thanks!
Matiasohhh..too complicated... you dont need to customize the settings if its already connected to the network.
>>If its already connected, make sure its getting an ip address coming from the router with a valid dns servers.
>>Try to ping router's default gateway and check if its communicating with it.
>>ping a website *(ex. ping yahoo.com)*. check if its getting replies.
Its just a simple and basic networking procedure.
xavier.
PROBLEM •► Reconfiguration of the Printserver
HISTORY •► Working fine before
RELEVANT NETWORK INFO:
•► Wired: 3 dt OS: xp
Wireless:1 lt built in OS:xp
•► Linksys Model#2: wps54g v
Serial Number: si4005802038 Warranty Expiresec 2008
•► Linksys Model#1: wrt54g v1.1
Serial Number: cdf20c902024 Warranty Expires:Jan 2007
TROUBLESHOOTING:
Specific Step-by-Step procedures taken with Customer. USE DETAIL.
█► CLient confirmed to me that the internet connection is working behind the linksys router and the only device left for reconfiguration is the printserver.
• Wireless settings needs to be check and reconfigured
• Successfully Charged
█► Access ui of the router
• EDit wireless settings [ userdefined ssid, channel 11 and wep is disabled ]
• Hardwire Desktop to the router - printserver - printer.
• Print the ip address - 192.168.1.103
• Syncronize wireless SSID - set static ip, subnet and gateway
█► Powercycle the printserver and the router
• Status is ONLINE
• Configured for LPR Printing - successfull
• Able to print wired
█► POwercycle the printserver and the router
• Able to Print wirelessly !!!
CLOSING REMARKS:
Mentioned Disclaimer: no
Mentioned 7 days: yes
Customer agreed to close the case: Yes
Customer agreed issue was: Resolved
Customer satisfied: Yes -
Simply says "cannot install on this computer" when installing on my g4
help! i went through all the steps and just before installing, it says "cannot install on this computer" with no error code, no other buttons, and no way to resolve the problem. i'm installing on a g4. please help!
Hello,
You don't provide enough information to provide you with a definite answer. What are you trying to install? OS X, an update, a program, etc.?
If you are talking about an OS X 10.4.x update, then you should make sure that you are getting the PowerPC version and not the Intel version of that update.
If you are talking about installing OS X (or any other Mac OS), then you do need to be aware of the following:
The Mac will only install from Restore Disks / OS installation disks that meet one of the following criteria.
1) Original Retail boxed version of Mac OS that is of a later version than the computer originally shipped with.
2) Software Restore / Installation disks that originally came with that specific computer.
If you are using anything other than that, you will not be successful in getting the computer to boot from the installation disks and install the Mac OS.
If you purchased / obtained install disks from someone else, and they are not retail disks, then that could be the problem. The grey disks are an OEM disk, and are keyed to a specific computer. If they do not detect that computer when you try to install them, then it will not work.
These disks are usually labeled with machine name on them like eMac, iMac, etc.
Even if the machine you have is the same one printed on the label, it still will not likely work. Not only do they check to make sure it is the same type of computer, but they also check to see if it is the exact same revision and version that it shipped with.
If one thing is different, then they won't install.
And, as mentioned above, if you use retail installation disks, then you will need to make sure that they are of a version later than the version which came with the computer. Apple has a mechanism built-in to prevent installation of an OS that pre-dates the version which shipped on the computer.
Perhaps a bit of clarification is in order:
I don't know which version of the Mac OS came with the computer you are specifically working with, so let me just use OS 10.3.7 as an example.
So, assume that the computer originally shipped with OS 10.3.7 pre-installed from the factory.
Now, the computer (and the Mac OS) would prevent you from installing OS 10.3.6 or earlier on it. The reason for this is that the operating system needs to be aware of all the system's specific needs. It needs to know how it's power management system works, and so on.
Now for the tricky part, I mentioned that in regards to the retail boxed version that you would need to install a version later than the version which came with your computer originally. Now, that may sound funny, but here's why.
Let's suppose that OS 10.3.7 was already available before your computer was produced. And, let's suppose that a few unique customizations were necessary to make the current OS 10.3.7 run on the new machine. In that case, Apple may have released a custom "Build" of OS 10.3.7 that would run on the new system. So, in that case, the already available retail version of OS 10.3.7 may fail to work on that system. But, OS 10.3.8 would be aware of the needs of that machine since 10.3.8 would include the customizations provided in that special build of 10.3.7.
So, that is why I suggested going for a newer revision of the Mac OS when purchasing / using a retail boxed package. That way you can make sure it is aware of your system's specific needs.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question. -
I had the replacement hard drive installed and the tech said he left the password open. My old password does not work. I can use the computer, but I cannot log in to add new wireless devices or to download programs. I recently tried to download Adobe Flash player, and I needed to log in but could not. I can downloan security updated from Apple and the machine will shut down and restart, without me needing to enter a password. I bought this computer from Apple directly in 2007. Is this a case where I need to send it to them since they can verify that I own it, or can I get help with this online or from a local computer tech?
If you use Lion, boot into your recovery pressing Command and R buttons, press "Utilities" menu, open Terminal and write:
resetpassword
If you have Snow Leopard, boot into your install DVD pressing C button, click "Utilities" and press Password Reset -
Can i make my 2011 iMac 21.5" OSX 10.8.5 behave as a wireless computer?
i have an 2011 imac desktop osx 10.8.5, how can i make behave as an wireless computer?
SaulCG wrote:
i am taking my imac to a rental apt, they do have a internet connection and a wireless router and an account with
Time-Warner. I prefer not to use a very long cord to connect to their wireless router box. Can I plug in a USB
stick into my imac and get on the net "wireless" not with the very long wire (cord)
Thanks for your help.
First of all you need ot find out if your landlord allows you to connect to their network. Is it part of your rental agreement? Do you need a password? Do you need to pay extra for access? Do you need a password from them? As another poster points out your iMac has Wi-Fi built in. All you need to do is turn it on. Open System Preferences -> Network -> Wi-Fi and turn it on. Your apartment's wireless network should appear if it exists. If you need a password to connect you willget that from your aprtment manager IF it's incuded in your rent.
Somehow, though, I get the impression we're not talking about the same thing. Are you moving in with someone who already has the Internet and you want to use their wireless network? -
The keyboard and mouse have stopped 'talking' to the computer - cursors do not move in response to mouse, right and left clicks do not register and typing does not happen.. Batteries have been replaced on both. The computer seems to be working normally in all other respects. The little green 'on' lights on both the mouse and keyboard light up for ~10 seconds,blink for about 20 seconds, and then go out. Computer shut down and restart did not change the situation. What's next?
Get a wired keyboard and mouse for times like these, also to perform at boot keyboard commands in emergencies.
Step by Step to fix your Mac -
I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.
Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps
Maybe you are looking for
-
How to print 20 lines in one page and remaining lines in another in script?
Hi I created 2 pages in script for page1 next page is page2 , how i can print 20 lines in one page and remaining in next page plz send me the code for that and is windows same for 2 pages?...
-
Hi, I would like to hear any suggestions or best practice to do this., I have a oracle spatial 10g, we have a table (with 35m rows-sdo_geometry =>current_table) and a row in the user sdo geom metadata table. We are planning to add new table (similar
-
Column of consecutive integers in Numbers
How do I enter a function that generates a row of consecutive integers in Numbers?
-
Noise similar to plugging in devices on my MBP
What is causing this, it sounds identical to plugging in devices on Vista or 7. In the background I have messenger for mac, and entourage running in the back ground and finder obviously. This can happen randomly 3 or f times in a row or every half ho
-
How to have a script like this in javascript
I have this script in VB, can anyone help woth the syntax in javascript ? <% If Session("variable") <> "" Then %> Whatever here .... <% End If %>