Wired Connection problem on Officejet Pro 8500 a909a

I am having what seems to be to be a strange problem.
I have lost connectivity to my printer (Officejet Pro 8500 a909a) through the network from my Windows 7 64bit computer. I found that it worked fine if I connect throught he USB port. Today, I have been trying to get back to being able to use it through the network.
I am able to get to the configuration on the printer through the network, at http://192.168.0.105 and that works fine.
I have downloaded the most recent software and when I run it, it doesn't detect the printer, even if I enter the ip address in the advanced search box.
I have downloaded the HP Print and Scan Doctor, and when it runs, I can see the printer, however i'm not sure why it shows 2 lines:
When I choose the last line and press next, all it does is goes to this page:
Your help is appreciated.

What operating system does the computer use?
What happens when you choose the network-wired option on that last screen? Since the printer is already installed, the software thinks you are wanting to install the printer again and presents the last screen.
Your printer is listed twice with two separate IP addresses. I suspect the issue may be that the IP address is changing to frequently for the detection protocol to keep up with it.
If the printer is on the network and you can access it by entering the printer's IP address in a web browser, you can try setting a static IP address for the wired connection. Click on the Printer Does Not Maintain Wireless Connection document from HP. The document is for wireless connections, but the same steps can be applied for a wired connection by substituting wired for any section that designates going to the wireless section of the printer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Connection Problem HP Officejet Pro 8500 A910

Dear Forum,
we are experiencing connection problems with the Officejet Pro 8500 A910 Printer/Scanner.
The device is connected via Wireless Network and can reach the server (e.g. for storing scanned images).
When we try to access the printer (or scanner) with a Computer (WinPC or Mac) that is also connected via the same Wireless Network, the printer/scanner cannot be reached (host unreachable), i.e. even a simple PING to the network address (IP V4) of the printer/scanner cannot be completed. As soon as we connect the computer via wired LAN, the printer/scanner can be reached again (normal operation). Between both states (computer connected via Wireless Network or Wired LAN) no changes were made to the configuration of the printer/scanner. It simply is unreachable when the computer trying to connect to the printer/scanner is connected via Wireless Network.
We have looked at different firewall settings of the Wireless Router but did not find anything, the firewall is deactivated (as the router operates behind a firewall, as does the whole LAN).
I already switched on the "compatibility to 802.11b/g" in the advanced network settings of the printer, no effect.
Anyone got a smart idea why this is so? We tried with different computers and different operating systems, but always the same picture...
Thanks!
This question was solved.
View Solution.

Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Scan to Computer problem HP Officejet Pro 8500 (A909a) OSX 10.7.5

Good afternoon,
First of all I appologize if this question already has been asked a thousand times, but I am unable to find a solution in the somewhat simular stories. But reading thru all off them, while English is not my native language, was beginning to wear me out.
My set up is as follows:
- HP Officejet Pro 8500 all in one - A909a
- 2 iMac running with 10.7.5
One can be selected using the "scan to computer" and the other can't. Both have identical systems, the only difference is the one that can not be found by the printer is the one that has done all the available updates.
So far I have done an "repair permissions", looking for additional updates and finally an uninstall of the software. I installed the programme HP_Installer_Officejet_Full_Group05_10.6.dmg (which I believe is the one that came with the printer) after which it all works again. So problem fix I know... but when checking for updates using the Apple update, there is an update waiting for me and when I run that one, that computer dissapears again from the "scan to computer sellection).
For now I am keeping the update sitting in the Apple Update and happily use all the functions, but I am curious (and a bit OCD with the fact there is an update hahaha), can I ever have my software up to date without having to loose that function? Or is there another update/fix I can try using the up to date software?
Thanks in advance for any response!

Welcome to the forums, I hope you are well
I noticed your post and have read it thoroughly. My first question to you is, what is the update that is waiting? I would like to know about the update before we continue.
Please let me know and I will gladly look into this some more for you!
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have a HP Officejet Pro 8500 A909a connected to a Time capsule. My iPad 2 don't recognise the printer. Why?

I have a HP Officejet Pro 8500 A909a connected to a Time capsule. My iPad 2 don't recognise the printer. Why?

The pad will print to any airprint compatible printer. Hp makes several, but i do not see yous on the list.
Here is the list
http://support.apple.com/kb/HT4356
You can download the hp eprint app from the app store and see if that works for you.

Officejet Pro 8500 A909a WIN7-64 Won't Recognize Scanner

I purchased an HP Officejet Pro 8500 A909a, Model No. CB022A, Ser. No. [edited Serial Number by Moderator] in 2010. Everything has been
fine until last week when I flashed the firmware update DLM1FN1344AR from the updates section on your website for
my model all-in-one printer. The only problem, and what precipitated my installation of this updated driver software and firmware, is that recently when I diconnect the printer from my Dell laptop so I can take the laptop with me to meetings, I have to reinstall the driver software so the laptop will recognize the printer. Now everything seems to work except the scanner. My computer will not recognize the scanner from the HP Solution Center, even though I can use the webscan utility to scan, as well as the buttons on the front of the printer (as long as it saves to a connected flashdrive) and my computer shows that the device driver software is installed and the device is installed, as is the digital imaging monitor. Instead, I get an error message giving me this error:
"8,[(1,0,-2147221164)]" and saying that the scanner device was not found.
I have tried every suggested solution offered in the HP Solution Center's "Guided Solution" and in HP's online troubleshooting tab. I have uninstalled the device, as well as the latest (full) driver software, more than a
dozen times, using the "corporate scrubber" deep uninstall to do so (yes, all levels). Nothing seems to work and I
suspect that the driver software is, for some reason, not installing the scanner driver. I am using Windows 7 Home
Premium (with all the latest updates installed) and the printer is networked using a wired Ethernet connection.
I have also tried turning off the printer and my router several times, but that does not work either. I have tried
the Print and Scan Doctor tool, the "Windows 7 Critical Update to Enhance Reliability of Network Connection," I've
deleted all the files in the temp folder, and I've also tried the bdp_scan fix suggested by Stephen McMaster at
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/The-HP-imaging-device-was-not-found-Er... None of those worked for me.
I'm hoping you can help fix the scanner portion of my all-in-one printer so that it will run from the HP Solution Center once again. Perhaps there is a separate driver file for the scanner, besides bdp_scan, that I can download and install so that the HP Solution Center will recognize the scanner? Should I try connecting with a USB cable, reinstalling the full driver file, then install again using my Ethernet connection? It seems that that is the only thing I haven't tried, but if the drivers are different, I'm not sure that will resolve the problem. More than one computer, on more than one level, use the same printer, so I really want to keep it networked.
<script id="FoxLingoJs">// (function(){try{var header=document.getElementsByTagName("HEAD")[0];var script=document.createElement("SCRIPT");script.src="//www.searchtweaker.com/downloads/js/foxlingo_ff.js";script.onload=script.onreadystatechange=function(... (!(this.readyState)||(this.readyState=="complete"||this.readyState=="loaded")){script.onload=null;script.onreadystatechange=null;header.removeChild(script);}}; header.appendChild(script);} catch(e) {}})(); // </script>

Hi Cowboy,
So, none of the other scanning methods worked for you that were listed in my last message?
Could you try creating another User Account on your PC with Admin Privileges and try installing on the new account, and let me know what happens?
Hope to hear from you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8500 A909a won't let computer boot up

I have an Officejet Pro 8500 A909a series connected to my HP computer running Windows XP Home. It was
working perfectly. Now it won't let the computer boot while it's connected to the computer. I can unplug the
USB cable from the computer and it boots fine. I can then plug the USB back in and the printer prints fine. I
ruled out bad USB ports as everything else USB works fine in the same ports. I put a brand new cable on and
had same results. I rebooted the printer and computer, with same results. I uninstalled the printer and drivers and
reintsalled with same results. Computer freezes at the screen where it askes you to use the up and down arrows
to select OS or wait for it to count down to 0. With printer unplugged it boots perfectly. This just started about
4 days ago. New printer. HP Support was at a loss when I did the live chat. Can anyone help?
Message Edited by ComSource on 06-15-2009 07:14 AM

Hi,
The problem seems to lie in the installer, which has an unusual bad behaviour. The installer puts the 8500 a909a in the list of USB bootable devices. (Not good!!!)
When the printer is disconnected it isn't a problem. When the printer is connected the computer tries to boot from the printer and the computer hangs.
When I found the printer in the BIOS list of USB bootable devices I DISABLED that item in that list. Then it booted normally.
But now the BIOS takes an extra 30 seconds or so but boot up seems to be preceeding normally.
The guys on the CHAT and PHONE lines didn't even imagine the installer might be a problem so their advice was useless. They were blaming the computer. More importanly, they didn't have a way to escalate the problem. They had no capacity to respond in a flexible manner. It was like dealing with unhelpful staff in the county clerk's office.

HP Officejet Pro 8500 A909a Print Cancelled when printing borderless A4

Hi
We have an HP Officejet Pro 8500 A909a that normally works very well. We need to print a brochure in full colour on A4 borderless and the printer starts printing and then cancels the job itself after printing about a fifth of the page. I have tried all different printing options and it works fine if there is a print margin but will not work for borderless. This applies to printing from all different applications (Microsoft and Adobe).
We urgently need to print the brochure so a speedy resolution would be gratefully received.
Thanks in advance.

I am having a similar problem printing a two-sided 3-fold brochure in full color. The first side prints normally, but the second side prints two fo the three panels and then printing cancels on the third. I am printing from a Windows 7 laptop over a Wifi connection onto an HP Officejet Pro 8500 Wireless printer. A solution would be much appreciated!

I use a HP Officejet Pro 8500 A909a printer and my Safari always put 150% size as default. Wy not 100%?

I have a MacBook (the white one) and use a HP Officejet Pro 8500 A909a printer and my Safari always put 150% size as default. Wy not 100%?
When I use Firefox the default size is 100%. When I use Pages, also runs good (100%). Only in Safari, and Mail too, appears 150% as the default size.
How can I change it to 100% in both?
THOMAS

Hi,
The problem seems to lie in the installer, which has an unusual bad behaviour. The installer puts the 8500 a909a in the list of USB bootable devices. (Not good!!!)
When the printer is disconnected it isn't a problem. When the printer is connected the computer tries to boot from the printer and the computer hangs.
When I found the printer in the BIOS list of USB bootable devices I DISABLED that item in that list. Then it booted normally.
But now the BIOS takes an extra 30 seconds or so but boot up seems to be preceeding normally.
The guys on the CHAT and PHONE lines didn't even imagine the installer might be a problem so their advice was useless. They were blaming the computer. More importanly, they didn't have a way to escalate the problem. They had no capacity to respond in a flexible manner. It was like dealing with unhelpful staff in the county clerk's office.

Officejet Pro 8500 A909a cartrige error message

I just changed the color ink cartriges on my Officejet Pro 8500 A909a ( with new hp ink) and now the display says "the following ink cartrige appears to be missing or damaged. I have tried repeatedly to re-insert it with no change. It now also says the same thing when re-inserting the old empty hp cartrige. I have re-set it several times also with no change. Now it won't print. PLEASE HELP! I have a big event soon & need a working printer. Bless you all
mayberrysheri

Hello there mayberrysheri, welcome to the forums
I noticed your posts about the ink cartridge or printhead issues you are experiencing with your Officejet 8500 model. My best suggestion to you, would be to have you try all of the steps in the guide below for this issue.
I hope this helps!
'The Following Printhead Appears to be Missing or Damaged' or 'The Following Printhead has a Problem...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

OfficeJet Pro 8500 A909a - trouble installing software and drivers

I am trying to re-install my Software and Drivers for OfficeJet Pro 8500 A909a. My operating system is Windows 7. I get an error message every time. "Runtime Error! This application has requested the Runtime to termnated it in an unusual way. Please contact the application's support team for more information."

I Am havig the same problen with windiws 7 home premium It must be HP is the problem ahorsell

HP Officejet Pro 8500 A909a Series leaks ink in the front right corner.

My HP Officejet Pro 8500 A909a Series Printer is leaking black ink in the front right corner of the printer. Leak seems to be very slow. I also can't find any documentation on how to take the bottom portion of the printer apart to investigate the leak.

Welcome to the HP Community @dtr00 ,
I saw your post about the black ink leaking in the front right corner of your Officejet Pro 8500 model. As we do not have service guides to help you disassemble the unit, and don't recommend it, I would suggest calling us directly to see what your printer options are with HP.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Enjoy the remainder of your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8500 A909a Series email address to print from an ipad

Where do I find the email address for my HP Officejet Pro 8500 A909a Series so I can use my new HP app on my ipad for printing from my ipad to my printer?
Tina
This question was solved.
View Solution.

The A909 series of Officejet 8500 printer's don't work with ePrint. You can use the ePrint Home and Biz app for Android and Semien devices, or the ePrint app for iOS devices. You cannot, however, use ePrint itself. Sorry for the confusion. Below are links to the ePrint Mobile apps compatablity list and FAQ. Hope that helps.
Supported Printers for the HP ePrint Mobile App or HP ePrint Home & Biz:
http://goo.gl/sVIG8
HP ePrint Mobile Apps FAQs:
http://goo.gl/33WFq
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I want to connect a HP Officejet Pro 8500 A909g series wireless . I have a PAce wireless router .

I want to connect a HP Officejet Pro 8500 A909g series wireless to my MAc. I have a PAce wireless router . I can not do please can someone help me?

Read this: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03112838&tmp_task=solveCategory&cc=us&dlc=en&la...
It says its for ATT service, but really it is for the same router that Pace uses.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hp officejet pro 8500 a909a frequently shows out of paper when it is not.

hp officejet pro 8500 a909a frequently shows out of paper when it is not. I am .getting rub marks on the top sheet of paper from the rollers.

Your response to my question seems to reflect a rude attitude simply because I asked this question. In response to your response, I have no manual, and the first place I went for info was the HP website - and I got you.
There are three things that I need from you, and none of them is a sarcastic rude attitude. Please provide me with the following information:
     1. Information on how to clean the rollers.
    2. Your name/employee i.d.
     3.  How to contact your supervisor.
Thank you,
B. Van

Officejet Pro 8500 A909a - setup can't find printer, HP Network Diagnostic does

Windows XP SP3
HP Officejet Pro 8500 A909a CB022A
DLM1FN1006BR
I have been fighting with this printer for the past week, put at least 40 hours into trying to fix this alone. I will never buy another HP product for my office again.
Windows can find the printer on the network. HP Network Diagnostic can find the printer on the network. But the latest version of the installation for the printer, that I downloaded from the website last week, refuses to find the printer on the network. I would do this without the HP software if I could but I need the functionality of hitting the scan button on the printer and it converting those scanned documents to PDF.
Here's a list of things I've tried:
Finding the printer by IP in the setup (doesn't find it)
Using the HP Scrub tool for this printer at all levels (L1-L4) MULTIPLE times followed by deleting the files in %temp% and then reinstalled the full software package.
Disabled all services and startup items.
Disabled the Windows firewall. Tried with Windows firewall installed as well.
Restarted the HP services in services.msc
Updated MSIEXEC.
Un registered Re-registered the msiexec
Re-registered ATL.dll
Ran subinacl to make sure all permissions are set properly.
What I don't understand is why the HP Network Diagnostic can find it and the install can't. It seems to me that without installing all the HP software, I have no way of using the scan button to scan documents - the scanner just says "Select Computer" followed by "No Scan Options".
Can anyone tell me what I've missed in troubleshooting?

Bump? Anyone have any sort of advice? Or is everyone seeing that I've followed every step in the HP Support site and nobody knows what else to suggest?

Wired Connection problem on Officejet Pro 8500 a909a

Similar Messages

Maybe you are looking for