Wired headset adjust volume

I seem to have stumped all support folks...has anyone figured out how to adjust the volume for the media player when listening through the wired headphones? I have played with all the advanced volume controls...even put the phone on vibrate and this doesn't affect the wired headset settings. it's still too loud for me even when i use the lowest setting on the exterior volume control on the 8120. thanks.

The Nokia Purity range (wired) will function as you describe. They are made by "Monster" and are available from many online stores.
http://www.puritybymonster.com/en/#page_home

Similar Messages

Nice wired headset for Lumia (tested i-Con and 920...

Received a Sony MDR-EX650-AP wired headset (ear buds) and it works a treat on the Lumia i-Con and Lumia 920, tested for hands free calls and music controls, wired headsets conserve energy by not having to constantly recharge bluetooth headsets and the power draw on the handset for bluetooth connection, wired headset also improves on audio qulaity over Bluetooth.
http://www.sony-asia.com/product/mdr-ex650ap
Mobiles sure aint what they used to be. They get better

Another wired Sony headphone / headset, works with Lumia's mentioned in post, the Sony XBA A2 , and the music / call button's work as they should. Were the button design is a very good design in how to reduce the amount of moving parts, dropping the volume button, and keeping to one button pressed once / twice / three times, would you pay for the additions of a button for stop / play, a button for forward / reverse and buttons for volume, but then all the additional buttons is only going to add to the rising sea levels.
Mobiles sure aint what they used to be. They get better

Looking for a loud wired headset

I have an E71 and I like to listen to podcasts etc while on the train/plane. I find the supplied headset (HS-47) has not got enough volume to make it over background noise. I have made sure the music player is on full volume etc, but it just is not enough - particularly spoken word stuff. I need a wired headset - with a microphone - in case the phone rings!
I can see some options - WH 500 looks like a likely contender. Anyone got any suggetions - It looks like the WH 500 will need a jack plug adaptor.. which is a shame.
Thanks for any help/suggestions in advance
Andy

I'd imagine that the reason you cannot find a loud headset is because of the 100dB noise level limit in the EU (Mainly France)
This article details the iPod, http://news.cnet.com/2100-1040-960211.html however I'm under the impression that every EU audio device carries the same crippling problem with the audio including Nokia Handsets.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Cannot adjust volume during calls on iPhone 6 (using EarPods)

I cannot adjust my volume on the iPhone 6 during the call on the EarPods. I can only adjust volume while the call is ringing or before a call, but once the person picks up, neither the phone's buttons or EarPods would adjust volume. It's once when I hang up and my music starts playing again, the music blasts my ear from the volume change I did (during the call).
The volume button works fine during calls when I don't use any earphones.
Is there a way to fix this?

Good Afternoon lopakamac,
If you are having trouble hearing a conversation on your iPhone, try the following steps:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
http://support.apple.com/en-us/HT203800
Turn up the volume
While you're on a call, adjust the volume with the volume buttons:
Also while you're on a call, make sure that you can see the volume indicator on the screen when you press the volume buttons:
Check the connections
If your iPhone is connected to a headset, you won't be able to hear through the iPhone receiver or using speakerphone. Follow these steps, testing after each.
Make sure that you don't have anything plugged in to the headphone jack or the dock connector.
Go to Settings > Bluetooth and turn off Bluetooth.
Clear the receiver
The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
Follow these steps, testing after each:
Make sure nothing is blocking the receiver, such as a case or film.
If you have a new iPhone, remove the plastic film on the front and back of the device.
Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
Restart and update
Restart your iPhone and test again.
If there's still no sound or poor sound quality, update to the latest version of iOS.
Get more help
If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
Last Modified: Feb 11, 2015
Regards,
- Judy

Adjusting Volume on Droid X

To ensure you are getting the best volume out of your Droid X, be sure to double check these settings on your new device!
-Menu
-Settings
-Sound and Display Settings
*Ensure that Silent mode is not checked (if you want audible sound)
*Check that your Ringer Volume is set at the appropriate volume level.
*Check that your Media Volume (for music and videos) is set to the volume level. *In addition check your Media Audio Effects option to ensure it is set to whatever device you may be using it with (wired stereo device) or just the phones speaker.
*Ensure that your Phone Ringtone is set to an audible sound, or a sound that is loud enough to alert you (some sounds may be softer than others)
*Ensure that your Notification Ringtone is set to an audible sound or a sound that is loud enough to alert you. (again, some sounds may be softer than others)
Check out more information at http://search.vzw.com/?do=viewdoc&id=33910
Note: If you have an alarm set, ensure that all the above is set to the desired volume levels, and if you have a task killer, do not end task/kill the alarm clock program. Ending the task, or killing the application will cause your alarm to not respond at the appropriate time. Depending on the task killer you can set the alarm clock program to be an exception when killing a task.
If the above does not resolve the issue, a soft reset would be recommended. A soft reset is pulling the battery out of the device for a few seconds, and placing it back in.
This information as well as other informaiton you may need on your new device can be found by selecting your model number and manufacture on our support site www.verizonwireless.com/support. Here you can do a quick search for what you are looking for.
Hope this helps!

Dear moates (Verizon Wireless Employee),
Although it is very kind of you to post info on adjusting volume on the Droid X, Droid X users may reasonably find your post frustrating if not insulting and/or offensive.
The alleged low volume/speaker issue/problem on certain batches or units of the Droid X is well documented by dozens, even hundreds (probably thousands) of Droid X owners on many different forums (Verizon forums, Droid forums, Android forums, etc.). All of these forum threads contain the information that you put in your post. In addition, the information that you put in your post is available in the Droid X manual, over the phone from Verizon tech support, and in many other forum posts. In short, you have said nothing new. The reason many Droid X owners may find this frustrating if not insulting and/or offensive is that many of them have already repeatedly gone through every detail in your post (and more) while on the phone with Verizon and Motorola tech support, while still experiencing a serious low volume/speaker problem on their Droid X. Nonetheless, the vast majority of Verizon tech support employees continue to tell Droid X owners who call in to report/document the alleged low volume/speaker issue/problem that Verizon has no knowledge of any such problem. Oddly, some Verizon tech support employees tell Droid X owners who call in to report the problem that Verizon knows about the problem and that a firmware fix is in the works. This inconsistency is troubling to many Droid X owners.
Whether the volume/speaker problem only plagues certain Droid X batches/units, and whether the volume/speaker problem is due to hardware or to firmware, in any case a firmware update that increases the potential volume of all Droid X units will help solve the problem.
Here are just two forum threads that contain reports of the alleged volume/speaker problem on the Droid X, even when all volume settings are adjusted to play the maximum volume level (note that when Verizon rearranged the forum communities, some of the forum posts/threads were cut off in some links, while some of the threads continue on in the relevant newly arranged forum community):
1) http://community.vzw.com/t5/DROID-X-by-Motorola/Volume-issue-on-new-Droid-X/td-p/227520;jsessionid=1BF0216A30F98F0470050FD66E67A3AA
2) http://www.droidforums.net/forum/droid-x-general-discussions/59913-droid-x-speaker-volume.html
What would be helpful is for representatives from Verizon (such as yourself) to comment on the actual problem: the large number of Droid X owners who experience very low volume/speaker performance even when the obvious settings on the phone (and listed in your recent forum post) are doubled-checked. Would you like us to organize a public online petition? A class action law suit? Most Droid X owners are not hostile and do not want to go those routes because they love their new phones as well as Verizon's otherwise excellent services. One of the only problems is the failure of Verizon adequately to address the alleged low volume/speaker issue/problem. A forum post that lists known information is inadequate because it makes no progress towards solving, reducing, and/or addressing the problem.
Could you give Droid X owners the courtesy of a more direct response to the allegedly very low volume/speaker problems that persist even when the settings listed in your post are appropiately adjusted and double-checked?
Thank you for your consideration.

Wired Headset issue with recording

Hi, I've a blackberry 9300 running on os5. When I try to speak during a call or record with the wired headset, the audio is not heard by the other person n doesn't seems to get recorded. With a high volume of audio it gets recorded and it is very feeble to listen with full volume. The speaker of headset works well when I listen to mp3. Also the headset works well with other devices where it can record the sound with minimal effort.. I donno what's wrong with it. Kindly suggest any solution. Thanks & Regards, Bhavan

Please try to isolate the issue by using another headset. If the other headset works fine, that means the one that you're using may be faulty.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Need headset with volume and mic keys

In Nokia, there is no headset in budget..
The only budget with stylish headset I feel is coloud wh - 510 only.. I like to buy.. But I need volume key also.. Because always a music lovers have earphone everywhere and here music any times and different situation.. We maximum kept mobile in pocket while travel etc etc.. Each time for adjusting volume or play pause ,, we feel tough to take out and change.. If u make a headset with volume and multi function key means then it will be a super budget and very successful headset in India.

arvi2512 wrote:
In Nokia, there is no headset in budget..
The only budget with stylish headset I feel is coloud wh - 510 only.. I like to buy.. But I need volume key also.. Because always a music lovers have earphone everywhere and here music any times and different situation.. We maximum kept mobile in pocket while travel etc etc.. Each time for adjusting volume or play pause ,, we feel tough to take out and change.. If u make a headset with volume and multi function key means then it will be a super budget and very successful headset in India.
Please take a look at the Nokia WH-920 Purity Headset - http://www.nokia.com/global/products/accessory/wh-920
Availability is limited and may vary per region.
Good luck

HS700 BT Headset Automatic Volume reset

Hi. Just bought an HS700 Bluetooth headset and paired it to my Z10. Everything worked beautifully except that when I first paired it the automatic volume control set the default volume to full up and I can't adjust it to a comfortable level with the Z10 controls. I removed the buetooth pairing from the phone and re-paired it several times but each time it reverts to full up in the earpiece and the phone controls can't adjust it. Is there any way I can reset the HS700 to the factory settings so I can set a comfortable setting for the automatic volume control? Thanks.

Hi zimmie and welcome to the BlackBerry Support Community Forums!
Just to clarify the issue you are experiencing, when you pair the headset, the volume it uncomfortably loud, then you adjust the volume. When you re-pair to the headset, the volume is back at that uncomfortable level?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

IOS 5.0.1 Bluetooth Headset Siri Volume Differences

Dear Community, dear Apple-Team,
I'm experiecing the issue that the volume on my Bluetooth Headset (Sony VH110) is different depening on how I start Siri. The problem occurs since I updated my IPhone 4S to iOS 5.0.1.
If I start Siri via the iPhones home button the voice on my headset is loud, clear and correctly responding to the volume settings. But if I start Siri two seconds later via the button on my headset, Siris voice is very silent and hardly understandable. Beside that Siris volume settings can't be changed via the volume control buttons on the headset (Note: I'm able to control the bluetooth volume settings via the headset while speaking, so usually this works fine).
To sum it up: The volume of Siris voice on my bluetooth headset is different depending on how I start Siri (via home button or headset).
Another note: It doesn't have any influence if I unpair the bluetooth headset, adjust the volume settings and pair again. It also doesn't have an effect whether "Voice Feedback" is turned on "Handsfree Only" or "Always".
Can someone confirm this as a bug or knows a workaround / solution? Thanks.
Regards,
Alex

Thanks a lot :) but I already red these instructions. Wifi connection works great, but a Bluetooth connection between my iPad and my iPod touch still fails. :(
I can't explain to me why the Bluetooth symbol in the right upper corner disappears altough Bluetooth is switched ON. On the iPad 2 also running 5.0.1 it doesn't disappear.

Audio Codec Error after adjusting volume V 7.02

I get an error reading audio file on playback after using
Adjust Volume tool, Presenter V7.02. I have to re-record the
audio.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56001-56500/sp56429.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load - it will automatically load an audio driver, but just let it complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Unified/Documented problems with Creative WOW Wireless/wired headsets

This thread is to properly present the problems encountered with the WOW Wireless/wired headsets. I will be linking this post to the facebook page as well as World of Warcraft's facebook and Blizzards facebook if I can find one. Also Lucas Arts and THX. Lets see if we can get some eyes on this and move forward. If you frequent a popular site where others are discussing this please bring this thread to light there also.
If it continues unrespondid to my next step will be to notify consumerist.com.
Please note I am to date not having these issues but they seem to be common enough of an issue. (I suspect we may be able to find our own solution also.)
When posting Please follow the below template.
Problem Description:
A non superlative description of your problem. Please just the facts here so we can all be very clear. Include any software tested with such as Ventrillo or WOW or games used that exhibited the problem.
Problem Impact:
Here is where we want to share how this makes you Feel. Describe the negative impact to your leisure or professional time with this product.
System:
Make/Model: (IE homegrown or Dell Optiplex xxxxx)
OS: (Operating System. Please include 64bit or 32 Bit.)
Processor: (i7920 or C2d6600 or whatever you have.)
Memory: (Amount of ram installed and running in the system.)
Video card: (What is the model of the video card in question? Memory installed on it? Manufacturer and such.)
Motherboard: (If you know the model. For instance. MSI x58M.)
Harddrives: (How many drives. What speed if you have them.)
Case: (what is the case? Normally I wouldn't ask but we are talking about Wireless transmission Who knows if that could matter right?)
Environment: (Where is the Wireless Dongle. About how far are you from it. Is something between you and the dongle normally? if so what is it? Do you plug it into the back usb port of your system behind a military grade metal desk from the 40's? That could matter.)
Troubleshooting:
This is where we describe in as much detail as you can what was done. Lets keep this to facts and try and remove feelings from this portion.
I can only hope with this information I or others can come up with a good solution for us all. Or Creative labs and their associated partners involved on this headset can drive this to a resonable conclusion for us all.
I do want to remind everyone here that we are in a new consumer technology area. There WILL be problems. Creative labs had to know this. Blizzard had to know this. And THX/Lucas Arts had to know this. How this problem is handled will impact all three of these organizations. To what extent is yet to be seen.

Problem Description:
Voice randomly becomes unintelligible and extremely distorted (think 70's robotic, accept you can't understand it) while in Ventrillo. My brother and I both have the same model headphones and we BOTH have this problem.
Problem Impact:
I feel cheated out of $119.00 + tax. The main reason for these headphones is for raids and they do not perform the task they were designed for. My guildmates have to be tired of telling me and my brother " Dude your headphones screwed up again." I have sent tickets in and the solutions provided were lame. Reinstall software... mute the microphone? Seriously? All of which did nothing. By the 3rd Email I got nothing at all. Newegg has tons of complaints about this on their site and creative reponded to 1 complaint that was not about this issue, but skipped all with this problem which tells me they do not want to deal with it. I have been a LONG time customer and supporter of creative. This is making me reconsider. If I can't find a solution soon I will return them.
System:
System:
Make Model: Homebuilt
OS: Windows Vista 64 bit
Processor: Core 2 duo E8400
Memory: 8 gigs of Corsair Dominator 1600 mhz
Video Card: 2 x GeForce GTX 260
Motherboard: XFX 3-way SLI Motherboard
Hard Drives 2 300 gig Western digitals 7200rpm
Case:Thermaltake Cosmos S
Enviroment: Wired WOW headset
Troubleshooting:
So far the only make shift solution I have found to temporarily fix the problem is to disconnect and reconnect Ventrillo. The problem will definately happen again but buys a little time between distortion. The only firmaware I have found is for the wireless headset not the wired. The auto update feature says all software is current.

How to adjust volume on Audio Timelines

A couple questions about volume adjustment on the various Audio Timelines on Premiere Pro CS 5.
1) How to adjust volume level of an mp3 on the Audio 2 timeline?
2) How to adjust or mute volume of an 'individual' video clip on the Video 1 and Audio 1 timeline? (I have many clips on the timeline and know how to mute them all, but in this case, I'm looking to only mute certain clips in the timeline.)

Along with the material covered in the Help File, that Ann linked to, see this ARTICLE. It goes into a little more detail on the differences between Clip Keyframes and Track Keyframes (generated with Audio Mixer). While the effect of those can be the same, there are nuances, that one should make note of.
Good luck,
Hunt

Wired headset still active

On calls, my wired headset remains active even though the headset is not being used.

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/TS1630?viewlocale=en_US

Volume showing a lock symbol when trying to adjust volume

Hi, I have a Z10 running 10.3.1.1565 and have the following issue that appeared out of nowhere. When I try to adjust volume it will not adjust the volume and there is a lock symbol next to the volume. Have tried restarting with and without battery pull... but nothing :-(. What is going on and how do I fix?

Have you tried adjusting in Settings >Main Volume?
Do you have Parental Controls enabled?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Adjust volume

Using Captivate 6, is it possible to have a playbar that the learner can use to adjust the volume of the audio? I know it is easy to get the mute button to turn audio on or off, but it does not adjust volume. There is a variable, cpCmndVolumet, but I don't know how that could be incorporated into the playbar.

More clear view -
From your desktop application list go to Profile -> Advanced -> highlight the active profile -> click Menu then Edit -> highlight Calendar (or any other item as required) and hit trackball set the following -
Out of Holster    : Tone
Tune                : Select desired tune
Volume             : hight/medium/low
In Holster          : Tone
Tune                : Select desired tune
Volume             : hight/medium/low
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Wired headset adjust volume

Similar Messages

Maybe you are looking for