Wired Headset issue with recording

Hi, I've a blackberry 9300 running on os5. When I try to speak during a call or record with the wired headset, the audio is not heard by the other person n doesn't seems to get recorded. With a high volume of audio it gets recorded and it is very feeble to listen with full volume. The speaker of headset works well when I listen to mp3. Also the headset works well with other devices where it can record the sound with minimal effort.. I donno what's wrong with it. Kindly suggest any solution. Thanks & Regards, Bhavan

Please try to isolate the issue by using another headset. If the other headset works fine, that means the one that you're using may be faulty.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Similar Messages

Issue with recorder

hi all,
i am encountering a strange issue.
i m trying to post transaction FBRA (Reset cleared items). when i run the transaction normally, supplying the doc. no. , comp code and fiscal year...i click on save and a popup message comes up which asks to either only reset the documents or to reverse them as well...no issues so far...
the issue however comes when i try and record this transaction....there is no pop up at all...?? why so??
although i went in the code and found out the screen no. and okcode value to code my bdc but i would like to know why such sort of a thing would occur....as per my knowledge...this cannot be a limitation with recorder...or is it?
any knowledge sharing will be appreciated...

Is this popup to get some kind of Profile?
I'm thinking that this is your problem, I did a search in that program for SY-BINPT , this is a system value which is set to "X" when in Batch Input or BDC mode. I think that this is why you are not getting your popup.
IF NOT ls_message IS INITIAL
 AND SY-BINPT = SPACE.
 CALL FUNCTION 'BAL_DSP_PROFILE_POPUP_GET'
 IMPORTING
 e_s_display_profile = ls_display_profile.
 ls_display_profile-use_grid = 'X'.
 CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
 EXPORTING
 i_s_display_profile = ls_display_profile
 EXCEPTIONS
 profile_inconsistent = 1
 internal_error = 2
 no_data_available = 3
 no_authority = 4
 OTHERS = 5
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
 CALL FUNCTION 'BAL_LOG_REFRESH'
 EXPORTING
 i_log_handle = ls_handle.
ENDIF.
Regards,
Rich Heilman

Xi-Fi Issue with recording

Im am recording in nuendo and Im using the creative asio driver. When I record a track on track one all is good. However, when I go to track two and hit record, it wants to record the play back on track one. I cannot play a track and record on a separate track without the first track being recorded also. How do I multi track record with the creative XI -FI ($199.00) setup. I also have an audigy zs sound card that I have no issues with. However my inputs seem to have stopped working after I swapped out motherboards. So I went out and purchased this creative XI-FI setup.
PLEASE HELP!

kbone wrote:
Im am recording in nuendo and Im using the creative asio driver. When I record a track on track one all is good. However, when I go to track two and hit record, it wants to record the play back on track one. I cannot play a track and record on a separate track without the first track being recorded also. How do I multi track record with the creative XI -FI ($199.00) setup. I also have an audigy zs sound card that I have no issues with. However my inputs seem to have stopped working after I swapped out motherboards. So I went out and purchased this creative XI-FI setup.
PLEASE HELP!
WHAT? Is there this "What U Hear" option on X-Fi too???
Just change the recording source to the one you're recording from (I can't say how because I do not have the X-Fi card). This can be done on Audio Creation Mode settings panel (I suppose). On Audigy .rec source shall be set to AnalogMix(...) or Microphone normally.
jutapa

Wired headset problems with 4.5

I have an 8130 with Verizon and successfully downloaded the 4.5 software upgrade. However, when I make or receive calls when using my wired headset I have no sound unless I plug in the headset after the call has connected. This is dangerous when driving, as I may have to re-plug it in several times before I get sound.
Is there a fix in place for this soon?
Thanks

Does the same thing after FF or RWD using the media player, pause seems to work okay...
...No fix that I know of...but the work-around I have been using (rather then plugging in after the call or unplugging then re-plugging) is, FF or RWD to the part you want, press the menu key scroll to "Activate Speakerphone" select it, then press the menu key and scroll to "Activate Headset" and select that. This is what I have been using with media, should work with calls. It's still a pain in the neck but cuts the wear and tear on the headset jack itself which from my experience can be a vulnerable part. Until they come up with a fix.
-Cam

Wired Headset issue

My Tour shows that I have a headset plugged in( all the time)...when I don't. I can not hear the phone without a wired headset. My bluetooth doesn't work because of this. I have shut down, removed the battery 4 times. Is it time for a new bbery?

First, try plugging IN a wired headset and while it is still plugged in, listen to some media or music and choose Menu > Handset or whatever the menu item is that you see to return the sound from the wired headset to speakerphone.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issue with Recording process

Hi Experts,
I was trying to create an LSMW object for Customer Master(XD01), So Intiallly I started recording the process of input through
SHDBRecoding process. The problem is that I cannot view some of the fields for input example in Address Details I have a field called as C/O and STREET2, which are not getting displayed while recording.
While creating the Customers normally without recording process, I have made these two fields mandatory for input. So, the fields are getting diplayed when I manually create the customers.
But, when I start the recording process, I cannot view both fields (C/O and STREET2) for input. Are there any settings to be done in recording process(SHDB) to make the fields visible and mandatory for input.
Your inputs would be certainly appreciated.
Thanks in Advance,
KishoreJ.

Hi Balu,
Thanks for the input, As I was mentioning in my question while I am manually creating (NOT THROUGH RECORDING PROCESS),
I can view the fields, since I made them mandatory and more over you would have the option MORE FIELDS, only when you manully create customers with out recording process.
If there is an option which can show "MORE FIELDS",in recording process Please let me know.
Regards,
KishoreJ.

Issue with records displaying in the advanced table in popup window oaf

Dear All,
I have a requirement as below.
I have a popup search page in that i am displaying the searched data in advanced table, but the issue is all the rows not displaying in the popup window because of poup window size, even i am not able to view the "Next" button in the table to proceed next records, can someone suggest me how to display the "NEXT" button in the table so the i can view all the records in the table.
or is it feasible to implement "SCROLLBAR" in the advanced table in popup window so that i can scroll vertically and horizontally to view records.
Thanks

Actually i have made a mistake, in my advanced table table property palllet i have mentioned maximum rows fetched 20 but in my page i was displaying 10 records only so thats why the navigation button not displaying,
Thnaks

Issue with recorded sound- sounds like the recordings were made underwater.

Hi, all.
I'm running Adobe Audition CS5.5 on a Toshiba Satellite Pro C660-1UZ with Windows 7 Home Premium installed. My machine meets all of the system requirements, as far as I can tell, and yet recordings made in Adobe Audition sound like they were made underwater.
For reference:
http://www.soundclick.com/player/single_player.cfm?q=hi&songID=11138745
I'm not using an interface at present, but would be willing if there were a cheap model available.
Thanks for any help,
Casey

I have a slightly older Toshiba Satellite notebook that I use for recording and mixing and I can tell you that the built in audio interface (i.e. the mni jack mic input) is worse than bad. I can get away with it for Skype phone calls but that's about it--and even for Skype I often plug in my interface.
The other thing going on with the sample you posted is that the levels are very low so the need to crank things up to hear anything just accentuates the noise.
Basically, Audition just takes the signal provided by your mic and interface and doesn't affect the sound in any way until you deliberately add processing. You really do need to invest in an interface--pretty well any two track USB devices will be a vast improvement on the Toshiba mic input.

Audio issues with Recording analog source

I'm trying to connect a turntable via the input/output (headphone) jack on the side of the monitor. No luck. Why?
Connecting via USB works, but I can't monitor the incoming signal (using mic input), no matter how I tweak the Windows audio mixer (as well as the software I'm using to record.
Very very frustrating. I'm afraid the single in/out jack is the problem, as my previous HP didn't have this problem.
thanks in advance!

The click can be found on the transport bar with the play stop rewind functions etc, the transport bar is normally at the bottom of the project, with the metronome being on the right hand side
If your recording multiple tracks at the same time, you need the relevent amount of tracks open, with each one being assigned a relevent input from audio source coming.
For example you want audio track 1 to have the audio coming from the guitar which may be input 1
Hope this helps

Wired Keyboard issues with Flash / general slowness with LION

So I upgraded to Lion about a month or so ago. All has not been great. I am running a 2009 Dual Core Intel iMac with 3 GB ram. One thing I notice is that initially certain flash support was NOT supported (mainly web cam support through flash on web sites). So web sites offering chat clients with cam support as an example - the performance would lag badly where typing messages would skip letters and leave nothing but garble. I attempted to try different browsers, but found the results to be disappointing:
Safari: Web cam support through web sites was simply broken - even manually trying to alter adobe settings would not get you any further
Firefox 5: You had to set permissions for web cam support prior to launching a web site as flash settings to enable / disable it within the web site were simply not useable
Chrome: Settings worked, but the performance was so slow, if using a web chat client and a web cam at the same time, it was almost impossible to type proper words unless you typed a character a minute.
I realize there has been a Lion update recently (a few weeks ago) and after the update, most of these issues seemed to be fixed. But then, Adobe came out with a FLASH update and now performance is lagging once again to the point where web cam and chat is almost not useable.
Is there anything that can be done to work around this issue?

Please read teh directions for an SMC reset:
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Wired ATV3 issue with iTunes.

Hi,
I stream my iTunes music from my iMac in the study to my Hi Fi in the sitting room. I tried doing this wirelessly using Airport Express, but due to the thick walls in the house the stream suffered very frequent dropouts. To rectify this I invested in Devolo Homeplugs and Ethernet connections, turned Airport Express WiFi off and turned Airport off on the iMac. Toslink connection to DAC. Brilliant.
So as to be able to view my iPhoto library on my Samsung TV I decided to get an ATV3, thinking I could use it in place of the Airport Express for the music.
Problem: even though connected by Ethernet the ATV does not appear in iTunes if AirPlay is turned off. If I turn the ATV's AirPlay on, still with Ethernet connection, I get frequent dropouts of the stream.
Any suggestions?

I have spoken to Apple Tech Support and established that AirPlay must be turned on even though I'm using a wired connection. Frequent dropouts persist. I have bought and tried a new optical cable, but it makes no difference.
Last night I fed the DAC by optical from the TV with the ATV connected to the TV by HDMI and the audio didn't dropout at all.
This seems like conclusive proof that the ATV's optical out is faulty.

E-business suites: ISSUE WITH RECORDING SCRIPTS IN R12.1 USING LOADRUNNER 9

My Customer use Mercury LoadRunner to execute our performance stress tests. The standard feature of
creating a transaction clickstream for the LoadRunner tool, requires that the tool know the object
(field, button, LOV, text). The way all performance tools identify an object is by RIGHT CLICKING
on the screen and selecting VIEW SOURCE.
Unfortunately, VIEW SOURCE is displaying the R12 Oracle object names with garbage appended at the
end of the string.
Examples of expected values:
value="DefaultFormName"
type="hidden" value="Cost_Allocation_KFF"
But what they get in View Source is as follows:
value="DefaultFormName Eb65TJbm "
type="hidden" value="Cost_Allocation_KFF 3WPwQoB7V "
BUSINESS IMPACT
The issue has the following business impact:
Due to this issue, users cannot complete a stress test
And without a stresstest, They cannot go-live with R12
=================================
This is generic isssue across all applications including sshr,
They are getting Dynamically Generated Characters in the field names while viewing the source
code of the JSP.
> For example, following comes while doing 'View -> Source' in IE:
>
> <input id="_FORM" type="hidden" value="DefaultFormNameuf3GKIsO" name="_FORM">
>
> There are extra characters 'uf3GKIsO' in 'DefaultFormName' .
I will appreciate if any one has come acrosss this kind of issue, please let us know how it can be resolved.
Any help / tips are appreciated.
Regards
Ravi

I found the same issue but resolved it by myself. The user table of the MySQL changed, my guess. You need to add another 'Y' or 'N' to the end of this statement in the build.xml of DataAppLoader:
INSERT INTO user VALUES ('localhost','dataapp','*B974A83D18BB105D0C9186756F485406E6E6039B','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','',0,0,0,0,'',NULL,'N');
The original one is like this:
INSERT INTO user VALUES ('localhost','dataapp','*B974A83D18BB105D0C9186756F485406E6E6039B','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','',0,0,0,0,'',NULL);
The new column added is password_expired. Y or N to indicate the password is good or not.

Issue with recording SHDB

Hi all,
iam doing a recording for t-code MMSC.
weni analyse the recording it gives me a message saying
Field RM03M-LGORT(4) is not an input field
Field RM03M-RLGOR(4) is not an input field
Field RM03M-LGPBE(4) is not an input field
Field RM03M-DISKZ(4) is not an input field
Field RM03M-LMINB(4) is not an input field
did anyone had the same issue.
Let me know how to overcome this.
Thanks
David

Hi Premal Mistry,
I beleive I was seeking help for Customer Master, But anyways if we consider the reply given by you for vendor master.
If I used the Function module 'ISIDE_SM_VENDOR_DETAILS_UPDATE', How Can I create an SHDB Recoding, in order to use it in LSMW, by Direct input or Recording method.
As I believe this is an Remote Enabled Function Module, should I create a raffer and use it as a BAPI.
As I need to upload " CUSTOMER MASTER UPLOAD" through LSMW.
Thank You,
KishoreJ.

Issue with Recording Process (SHDB)

Hi Experts,
I was trying to create an LSMW object for Customer Master(XD01), So Intiallly I started recording the process of input through
SHDBRecoding process. The problem is that I cannot view some of the fields for input example in Address Details I have a field called as C/O and STREET2, which are not getting displayed while recording.
While creating the Customers normally without recording process, I have made these two fields mandatory for input. So, the fields are getting diplayed when I manually create the customers.
But, when I start the recording process, I cannot view both fields (C/O and STREET2) for input. Are there any settings to be done in recording process(SHDB) to make the fields visible and mandatory for input.
Your inputs would be certainly appreciated.
Thanks in Advance,
KishoreJ.

Hi Premal Mistry,
I beleive I was seeking help for Customer Master, But anyways if we consider the reply given by you for vendor master.
If I used the Function module 'ISIDE_SM_VENDOR_DETAILS_UPDATE', How Can I create an SHDB Recoding, in order to use it in LSMW, by Direct input or Recording method.
As I believe this is an Remote Enabled Function Module, should I create a raffer and use it as a BAPI.
As I need to upload " CUSTOMER MASTER UPLOAD" through LSMW.
Thank You,
KishoreJ.

Wired Headsets not working with Galaxy S5

I have a number of wired 2.5mm headsets that I use with other Android based smart phones (Droid 4 most recently). I use multiple 2.5mm to 3.5mm adapters, and they have all working fine for all of them.
When I try to use any of my wired headsets + adapters with my Samsung Galaxy S5 I hear the audio from the headset, but other people don't hear my voice from the headset. When I connect the headset it shows as "earphones" everytime, and indeed does work fine as a earphone, but the microphone does not work. I'm wondering if there is a setting I need to change so the S5 sees my wired headset as a device with a microphone and not just headphones.
Does anyone have any ideas on this?

I found out that the wiring of the contacts is different for some phones. If the earbuds say compatible with iPhone then the tip/ring/sleeve contacts are swapped in relation to the Galaxy S5's contacts. See: Phone connector (audio) - Wikipedia, the free encyclopedia

Wired Headset issue with recording

Similar Messages

Maybe you are looking for