Wired Logitech Mouse not Working on Desktop only in Windows 7

I used a wireless, but got fed up changing batteries so went back years ago to using a wired mouse when using Windows 7.   However, about 1 in 4 times, in the last few months, when I switch on my computer, the mouse will not let me choose
if I want to go into my pages or my partners' page.  It just hovers all over the Desktop and I have to switch off the computer and reboot it to get the mouse to work properly.  THIS ONLY HAPPENS WHEN I SWITCH ON THE COMPUTER AND ONLY HOVERS
IN THE DESKTOP.
I have used more than one mouse and have put it in different ports and it makes no difference.  Somewhere on my system when the computer starts up, it randomly does not recognise the different wired "mouses" I use.  Otherwise
I have no problem using the mouse and it generally works fine.
Any suggestions on how to fix this start-up/desktop mouse problem?  Thanks.

Hi,
Try to uninstall the USB controller driver:
1.Open the Device Manager.
2.Expand Universal Serial Bus controllers.
3.Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
4.Restart the computer, and then reinstall the USB controllers.
Check the result again.
Alex Zhao
TechNet Community Support

Similar Messages

  • VN7-791G all bluetooth devices like Logitech mouse not working after Windows 10 upgrade

    After upgrading to Windows 10 on my 2 month old Acer VN7-791G, my Logitech bluetooth mouse could not pair, my bluetooth speakers could not pair and neither could by Nexus 7.  All these devices were working fine on Win 8.1 earlier. Under Device Manager, only the generic Windows Bluetooth, Microsoft Bluetooth Enumerator and LE Enumerator drivers were showing (dated  21/6/2006).  Under Network adapters, the driver showing was the Qualcomm Atheros QCA64x4 ver 10.0.0.62 dated 18/5/2015. I checked that this model is indeed compatible under ACER's website for Windows 10.  I have also been checking the ACER drivers for Win 10 for this model but there are no new updated ones for Bluetooth. I downloaded the Win 8.1 ones and installed them but they still would not work (the Microsoft ones are still showing under Device Manager). I had to actually downgrade back to 8.1 a few days ago due to this issue but thought I would try to update to Windows 10 again hoping it would work but still no luck.  I had googled but can't seem to find a solution and suspect that I need an updated bluetooth driver for Windows 10 from Acer or Broadcom.  The Atheros website do not have any Windows 10 bluetooth drivers as well. I may have to downgrade again and try again in a few months time unless someone could please point me in the right direction. Thank you.  

    Yay! Success at last!  Well, I had to resort to drastic measures which I was dreading and delaying. Basically, I rolled back to Windows 8.1 Then Reset PC to Factory Setting.  This wiped out all data and applications/programs After getting back to default Windows 8.1, I tried pairing my bluetooth mouse and it worked I then immediately installed Windows 10 (from ISO file downloaded earlier) off a USB stick I chose the option for a clean install (this doesn't load any of the ACER bloatware) Once logging into Windows 10,I went into Device Manager and uninstalled all Bluetooth drivers Then I ran the setup for the Windows 8.1 Atheros bluetooth drivers as suggested - "LITE-ON Bluetooth_M 3rd WiFi 2x2 AC+ BT M.2 QCA NFA344_3.0.0.373_W81x64" I tried pairing my mouse and Nexus 7 and it works!!! For reference, here is my setup under Windows 10 after successfully pairing bluetooth devices. btw, interesting to see that the event log still reports some error about further installation just like earlier - probably indicates that the Win 8.1 Acer drivers are not 100% compatible yet.     

  • Why does Digital Edition not work in desktop mode for WIndows 8?

    I have installed the most recent version of JAVA and then downloaded and installed Digital Editions.  I can open Digital Editions in desktop mode but when I select a book I cannot turn the page or move to a new page by any means.  The only thing that seems to work is to select a new page and then toggle between full screen and partial.

    I don't think ADE uses Java at all.
    I run it in desktop mode in WIndows 8 and it reads books and turns pages fine: either using the left-right arrow keys,
    or clicking on the forward/back buttons each side of the scrollbar at the bottom of the page.
    There are lots of bugs in ADE2.0, and even though that isn't a bug for me it may be for you.
    Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172

  • Speakers not working for Skype only on Windows 8.1

    My speakers or headphones are not working for Skype desktop but work fine for any music or videos or other programms. Any help to resolve it? in Tools>Options>Audio Settings> headphones does not show up. Everything was working fine but it just happend a day before., i havent installed any program that could make problem.

    This is very strange because, as you are saying this happened without any change to any software on your computer. I suggest the following:
    1. To help the team analyze the issue, provide logs as described in this link  under Skype for Windows Desktop and attach it to your post.
    2. As an interim solution you can try using a virtual audio device that will be a middle man between skype and your physical audio device.

  • Internet explorer not working on desktop mode in windows 8 operting system

    i use hp pavillion laptop it has windows  8 as operating system...usually i use desktop mode of internet explorer but suddenly it stopped working since past few days..the metro tile of internet explorer works well...i really need help..please help urgently..nothing connects to the internet from the desktop:- internet explorer,fire fox mozilla,bluestacks,updating of norton security...urgently need help all that the internet explorer says is "page cannot be displayed" pleasseeeee helpppp

    Go to the Start Screen, type in "Internet Options" go to the programs tab, and click the checkbox with "Open Internet Explorer tiles on the desktop."
    Also, going to Internet Options from the Control Panel works if you can't search
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

    Problem : System Freezes frequently on any hardware scan or changes.
    Symptom : Wireless Keyboard Mouse not working.
    Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
    Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
    Soultion : Please follow steps below
    Step 1: Start > run > regedit
    Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
    Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
    Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
    Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
    This worked for me. Hope this works for you. Enjoy..!!

    Hi AshishSrivastava,
    Thank you for your sharing and update.
    Besides, I will change this thread type as discussion.
    Best regards
    Michael Shao
    TechNet Community Support

  • Mouse not working in open applications

    Mouse not working properly on menu bar in certain applications: Text Edit, Calendar, Notes.  You can hover over the  red X but it will not close the application.  Also unable to click on a text form and drop the cursor in to edit or copy text.  Can open preference box but uanable to navigate because mouse will not click.  Have to now use keyboard to open and close most applications.  Virus?  Setting that got magically turned on?  Have powered down, checked batteries, etc.

    This is not due to a virus, or any other kind of malware.
    First, is this a wired mouse or a Bluetooth mouse? If it's a Bluetooth mouse, try changing the batteries, even if they should be fully charged.
    Have you tried a different mouse? If not, try that. Borrow one from a friend or buy a cheap wired mouse and see if that makes a difference.
    If the problem affects all mice, try restarting in safe mode. Does the problem happen while in that mode? If not, and if it comes back when you restart normally, then you have some kind of third-party software that is causing the problem. The trick will be figuring out what it is.

  • Mouse not working when reinstalling OS X with install disk

    I am trying to reinstall OS X 10.3 on iMAC G5 after a hard drive crash with the help of the original install disks, but my wireless mouse does not work anymore. Any ideas how I can solve this or go through the installation process with the keyboard alone? I couldn't find a keyboard shortcut to tab from a list in a window to the select button...

    How is your mouse not working? Is it dead?
    Is the wireless mouse a Mighty Mouse or a 3rd party mouse?
    Does you mouse need batteries?
    *Just in case it's dirty:*
    http://docs.info.apple.com/article.html?artnum=302417 How to clean your Mighty Mouse
    Take a piece of bright white paper, turn the mouse upside down on it, press down on the ball, and run the mouse quickly in circles over the paper. This will remove all the gunk that's building up on the ball
    TIP: To get to the gook inside the scroll nipple use a plastic toothpick.
    "Other Options:" Wear latex disposable gloves. A box of same can be purchased from your local Dollar Store or Pharmacy.
    Some cell phone leather cases actually fit right over the Mighty Mouse.
    Clean/wipe the Mighty Mouse off with a damp cloth/rag prior to going to bed each evening.
    Some users have found using the small alcohol pads quite successful. These can be obtained from any drug/pharmacy or Dollar Store.
    Only do the following if your warranty has run out:
    Cleaning inside and dismantling the Apple Mighty Mouse
    If so, then I suggest (if your 1 year warranty is not up and/or you have Apple Care Protecton Plan) you call Apple Tech Support & ask for a replacement.
    =========================
    Mighty Mouse Take Apart Photos

  • Keyboard and mouse not working

    both keyboard and mouse not working. I have changed batteries and checked drivers  please help..  thank you
    This question was solved.
    View Solution.

    Thanks for the information, that is exactly what I needed.
    If you are having the enter issue when using the wired KB from your old computer that sounds software related with the blog site.
    What web browser do you use when on that website?
    Connect your wireless equipment back and if you continue to have the issue with the letters repeating then you should inquire about a replacement for what is referred to as "sticky keys".  With it being a new unit this shouldn't be an issue.
    Let me know if you have other questions.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Ultraslim wireless keyboard and mouse not working

    Hi ,  I purchased the Lenovo Ultraslim Wireless Keyboard & Mouse (pn: 57Y4700) about 4 months ago for use with my T60 laptop (which i use with a docking station and large lenovo monitor at work).
    Everything was woking fine until last Monday when I can into work after the weekend and neither the mouse or keyboard worked. I replaced the batteries in both, rebooted the machine several time, switch the USB ports for the nano receiver, but nothing seems to have worked.
    I looked online for troubleshooting options, but did not find anything.
    The mouse and keyboard don't seem to have a "sych" button - if I recall correctly everything worked right out of the box.
    My theory is that the nano reciever was damaged (not sure how) -- but don't know how to proceed:
    can the nano reciever be replaced;
    any other options to troubleshoot;
    any chance that this could be a software problem
    Thanks

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Satellite C665 - Keyboard and mouse not working

    Hi there
    i bought a Satellite C665 last saturday and now the keyboard and mouse are not working
    it's only been used a couple of times

    Hi
    Are you able to use the keyboard within the BIOS?
    Saying mouse do you mean the USB external mouse or touchpad?
    Are you able to use external USB keyboard?

  • My imac  keyboard and mouse not working

    On my imac,keyboard and mouse not working,i can't login or do anything,i have tried unplug mains,plug back,hold power botton alt  cmd p and r all at same time for 40sec still nothing,i need help bec i can't use my imac please help

    How about telling us how your keyboard & mouse are not working?  Are both using batteries or are they wired?  If batteries, have you checked and/or changed them?  Keyboard & mouse Apple's or 3rd party?  If you are still under warranty and/or have AC, call them & let Apple deal w/your problems.
    If possible, try another keyboard & mouse? 
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    ================
    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
    CLICKY CLICK-----> Help us to help you on these forums
    ***This will help in providing you with the proper and/or correct solutions.***

  • My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

    my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
    The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

  • My wired mighty mouse no longer scrolls down - only up and sideways.

    My wired mighty mouse no longer scrolls down; only up and sideways. It could be a hardware problem and I guess I should go and by a new mouse but before I do I thought I'd check whether there was any parameter I could change to fix or test this. Anyone else had this problem? Cheers.

    Hello and welcome to discussions,
    Several ways to cure this one...
    http://support.apple.com/kb/HT1537
    http://www.mightymouserepair.com/
    http://cultofmac.com/how-to-clean-your-mighty-mouse/4946
    Any better now?
    Regards.
    Ian.

  • Magic mouse not working in mountain lion

    magic mouse not working in mountain lion....What can I do?

    Have you tried a fresh set of Alkaline Batteries?
    Was  it ever paired to another divice?

Maybe you are looking for

  • No Filtering  while using PNP DB

    HI all, I am using PNP DB to get the HR data... I m giving the data range in the std selection screen ... but it is not filtering the data on the basis of data range.... it is giving all the data which are present in the DB... plz help me in troblesh

  • Using the TAB command

    Hello Captivators! I'm a beginner to this application...so here's my problem. Everytime I use TAB as my "Current shortcut" it highlights the playbar after hitting the TAB key. Why is that? Am I using the wrong object? For instance, a TEXT ENTRY objec

  • I installed latest Aperture updates, and then downloaded photos and built slidewhow. Went to burn in iDVD and it won't read new slideshow. Any Ideas?

    I installed latest Aperture updates, and then downloaded photos and built new slideshow in Projects. Went to burn DVD, but iDVD will not read the new slideshow. Any ideas?

  • Password not showing for Gmail

    I am using Mac book pro 10.8.5 and safari browser For Gmail, the saved password ,not showing in the column. Pass word needs to be entered,  manully -------every time you log in. Other mail accounts working well . Any way out.                        D

  • Print PO Message

    Hi all, when a PO is created a message is created too. Now I have to develop an application that search some OdA and if the message (table nast for understanding) isn't print yet, the program has to print it automaticaly. There is any bapi or functio