Wired mouse changes behaviour of OS X

Hi guys. When I plug in a wired mouse, currently I'm using a Cyborg RAT 5, it changes the behaviour of OS X. For instance when using a track pad or magic mouse, when scrolling to the bottom of the screen to get to the hidden dock it automatically appears when i touch the mouse to the bottom of the screen. When I plug in a wired mouse it then makes me have to click on the bottom of the screen for it to appear. This is just one instance of what changes when you plug in another mouse. Another being when in Safari with a trackpad you can scroll over a tab and it will automatically show the little X icon to close that tab, when you plug in a wired mouse you have to click on the tab for the icon to show (I just tried hovering the cursor over a tab with the mouse plugged in and no icon showing, then as soon as I unplug the mouse the X icon appears!).
How on earth do I stop this? How can I get OS X to keep the same behaviour for all mice wired or otherwise?
Sorry if this is documented else where but I'm having trouble finding anything on the subject! Perhaps it's the keywords I'm using to search.
Thanks guys and gals

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • I have a iMac 21.5", with cordless mouse, very often it shows "not-connected" or "connected", at its will, we can't do anything. Changed the battery, no improvement. Now fixed another wired mouse to the system to work. My wire less keyboard working well

    I have a iMac 21.5", with cordless mouse, very often it shows "not-connected" or "connected", at its will, we can't do anything. Changed the battery, no improvement. Now fixed another wired mouse to the system to work. My wire less keyboard working well

    Make the device a favorite.
    Also, I would reset the PRAM and SMC.
    Barry

  • Wired mouse causes screens to move about

    I've read problems with mouse cursors that move randomly. My problem is that the screens I'm working on jump around randomly when I touch my wired mouse. I've dis- and re-connected both mouse and keyboard; I've also changed mouse settings in System Preferences, but I can't stop screens from moving without losing use of mouse. Is there any way to reset? Will new mouse solve my problem?

    Hi, have you tried:- SMC & PRAM resets..
    I would also consider trying another mouse & keyboard combination so as to reassure yourself your existing K/B & Mouse are not giving the issue..L

  • Wired mouse pointer disappears?

    The pointer on my wired mouse regularly disappears from the screen, making it rather difficult to continue to use Word
    Any suggestions as to the cause?

    Does the status of the mouse change if used on a different surface?
    At times a mouse won't work correctly on
    super smooth or woodgrain surfaces...
    If you have a second computer, or a different mouse, using these
    to test your mouse issue could help resolve or troubleshoot it.
    And double-check the USB port in the computer. Do you have a
    powered USB hub? A mouse can work through one, but if it fails
    try connecting direct. And if plugged into a keyboard USB port
    use one in the computer instead. Maybe you need a new mouse.
    Good luck & happy computing!

  • My wired mouse no longer will right click.

    My wired mouse will no longer respond to a right click. Settings in System Preferences have not changed.
    Any Idea what might be the problem? Am running 10.6.8
    Thank you

    It's possible but not normal it could have failed. How old is it? Can you take it to a friend's computer to confirm?. If it works there, it's something on your iMac most likely software related. You can also check their mouse on your iMac.

  • Wired mouses freeze continually

    I have just received 15 new iMacs for a computer lab in our school.
    The wired mouses continually freeze and I have to change the port they are in.
    The usb plugs seem to be very sloppy in the ports.
    Has anyone else had this problem and how did you solve it?

    Hi Donald.
    I am using the Apple wired keyboard and the Magic Mouse that came with the iMac.
    When I loose control of the cursor (it is not really a computrr freeze as I mistakenly described), I can log in with my laptop and, using screen sharing, control the cursor to restart the iMac. Yet I lost control of the keyboard connected to the iMac and the Magic Mouse pared with the iMac.
    This is a weird one so I am trying to work this a little at a time. Since this has only happened while I was listening to some audio thing like I described, I am going to start there for lack of a better place. I have disconnected the Harmon Kardon USB Soundsticks speakers I have had for 11 years. I'm going to work it a while without them to see if the problem comes back. Seems like a good a place as any to start.

  • What is the proper way to disconnect a magic mouse and reconnect a wired mouse with new Mac Pro?

    I can disconnect the magic mouse pairing, but when I then connect the wired mouse, it malfunctions. I can open folders, etc., but then I can't close them by clicking on the close button.

    Thanks for your response. Actually, this is the first thing I did. But I just tried it again, and still the mouse malfunctions.
    I can open a folder, but when I press the close button in the corner, a toolbar customization menu comes up, but the window does not close.
    I have already chatted online with an apple tech several times and taken my computer in to an apple store tech -  but no resolution to the problem. The online tech could see the problem with screen sharing, but couldn't fix it, and the tech at the apple store could not replicate the problem. In pursuit of an answer, I have also purchased a new wireless mouse (which works), a new wired mouse, and a new keyboard.
    I have a late 2013 Mac Pro running 10.9.5, connected by HDMI to a 27" LG IPS display (27EA83R). I am now going to purchase a new HDMI cable and see if that helps. If it doesn't, the only thing left that hasn't been replaced or tested by a tech is the display. I have been assured by both an LG tech and an apple tech that the display is almost certainly not the problem -  but at this point I am not sure I have the greatest confidence in these guys.

  • TS3048 My keyboard will connect wirelessly but my mouse will not. I've put new batteries in the mouse and the green light is blinking but it just won't connect!!! I don't have a 'wired' mouse so I can't get into preferences etc!!! Pls help

    My keyboard will connect wirelessly but my mouse will not. I have tried many times, put new batteries in etc. The Bluetooth appears to be on (as the wireless keyboard is working). I don't have a 'wired' mouse so I can't get into preferences etc. Is the mouse dead perhaps? The green light is flickering so it should be ok???
    Thank you for your help
    Sully (frustrated Irishman)

    From what you say I would suggest the batteries are not connecting properly.
    First, thoroughly clean all contacts, both inside the mouse and the contact points of the batteries.  Use an alcohol based cleaner (whisky will do, hic!)  dampen (not wet) cotton buds for cleaning.
    Then check to see if they fit firmly.   If you can shake your mouse and hear things are loose, that will be the batteries.   Check the make.   Apple and Duracell, in that order, are the best batteries.   Where slight undersizing has been reported they are with other than the foregoing.
    You can resolve the size problem with appropriate packing but that will always be a makeshift solution.  After, reassemble, turn on the mouse and with luck, away you go. 
    Hopefully this will solve your problem but in any case let us know how you get on.
    Message was edited by: seventy one

  • Can an iMac 10.6.7 snow leopard with wired MOUSE be upgraded to LION OX?

    Hi can you help,  Can my iMac OS X 10.6.7 that uses a wired mouse be upgraded to Lion OX if so how could I zoom the screen with my fingers as I dont have a magic mouse or magic pad?  Also can my iMac work okay if I got rid of the mouse for the pad.  I bought the iMac just 2 mnths before the new ones came out pity but love it anyway as I have had 3 windows PCs and 2 laptops but nne of them are as good as the Apple iMac.

    As long as your iMac meets the system requirements, you can buy Lion - having a wired mouse has nothing to do with the operating system; it just will not allow you to use any gestures. But I can't see why you just couldn't use it as you always have. And, as long as your iMac supports bluetooth, I'm sure you can buy a trackpad if you like - then you'd be able to use gestures.

  • Issue with wired mouse

    I recently upgraded my mid-2011 iMac from Lion to Mountain Lion (10.8.2).  I am now having trouble with my wired mouse.  I use a two-button Microsoft mouse which worked fine for a year with Snow Leopard and lion, but now gets a "sticky" pointer within a few hours.  If I reboot, the problem goes away for a few hours. Similarly, if I unplug the mouse and plug it back in the problem seems to go away for a time.
    I found a few other references to this problem, but I have yet to see a solution.  Has anyone found a solution that I simply have come across yet?

    EDIT:
    ACTUAL FIX, AND YOU'RE NOT GONNA LIKE IT!
    I've found that I only ever experienced mouse lag, when my RAM (memory) usage peaked, resulting in Windows being forced to do disk paging to cope with my lack of RAM.
    You can see if this is your problem, by hitting CTRL-SHIFT-ESC to open the Task Manager, and go to the Performance tab (do this just after a fresh reboot!!! See why below.). Leave it open, and try doing a lot of things at once (open a browser with many start-up
    tabs while opening some RAM-heavy program, like a programming IDE or a video editing suite). If it peaks, and your mouse subsequently lags, you probably need more RAM for your purposes.
    This also explains why people can be posting so many different false "fixes". Whenever the lag occurs, because some operation needs more RAM, the data is cached
    in the page file. So when people have experienced lag while using their computer, and then do something to try and fix their problem, and try the same things that made the computer lag before, all those things are already cached, and therefore won't lag anymore...until
    you restart your computer, or the pagefile has been filled with new data.
    The fix for me, ended up being installing more RAM. If you do not have that option, try to limit the number of programs simultaneously running on your computer. One way
    to do this, is by unchecking unneeded start up programs, using these steps:
    1. Start ==> Run
    2. Type in: msconfig
    3. Hit enter the Startup tab
    4. Untick all programs THAT YOU KNOW, which you do not need to have available at start up.
    Another way, is to remember to close programs when you're done with them.

  • Wireless or Wired Mouse on Satellite Pro P series?

    Do Wireless Mice consume more battery power than their wired equivalent on a laptop?
    Just wondering

    Wonder why? :)
    I think the consume the same.
    I mean, compare the wireless sender to a wired mouse. Maybe the wireless mouse will sometimes need a litttle bit more but not significantly so I think it doesnt really matter which one you use. ;)
    Regards

  • Wired Mouse Occasionally Wants To Jerk Away In Other Direction

    First off,
    I loved my Mighty Mouse, but the "Connection Lost" issue got progressively worse and two trips to The Genius's ( including a new Bluetooth Card ) did diddly to fix it.
    My wired mouse has been generally more dependable, but I often get a pull to the upper right when trying to swipe from the upper right to the lower left . . . this repeats 3 or 4 times till I get it to cooperate and follow me down.
    My "mouse pad" is a wooden table to the iMac's right which seems otherwise fine for smooth mouse moves.
    I have not, however, ever done much in System Preferences with setting up a mouse's preferences like : "primary button", "scrolling" or "double-click" as all that stuff always seemed too complicated to me.
    Could that be the root of this quirky response problem ?
    TIA !

    It just might simply need cleaning.
    How to really clean your Mighty Mouse (with caution!):
    http://support.apple.com/kb/HT1537
    and:
    http://web.mac.com/karelgil/iWeb/MacWebSite/MightyMEng.html

  • New wired mouse

    My drive is partitioned with XP SP3. I have been using a wireless keyboard and mouse for gaming and it is very possible (not probable or certain!!) that my mouse is contributing/causing game freezes and subsequent BSOD. If I was to borrow a wired mouse should I go for the Apple Mighty or consider a microsoft mouse (better compatability with XP?). I would add that I am a "low end" gamer so I do not need an all singing dancing mouse!
    Many thanks

    I borrowed a mighty mouse and my freezing problem has gone away (at least for the present anyway!)

  • How Do I Stop HP X3500 Mouse Changing DPI Settings When I Hold Down Left + Right Buttons?

    I have purchased the HP X3500 wireless mouse, and frequently interact with applications which require me to simultaneously click on the left and right mouse buttons. Every time I do this the DPI value is changed (since holding them both down for 3 seconds each and moving the mouse changes the DPI). This is due to a feature with the mouse.
    How can I disable this? The mouse itself did not come with any bundled software.
    thx.

    In order to make use of the right-click inside an open session you have three options:
    Standard PC two button USB mouse
    Apple Magic Mouse: To enable right-click, clickSystem Preferences in the dock, click Mouse, and then enable Secondary click.
    Apple Magic Trackpad or MacBook Trackpad: To enable right-click, click System Preferences in the dock, click Mouse, and then enable Secondary click.
    Extracted from "Remote desktop Client on Mac: FAQ"
    http://technet.microsoft.com/en-us/library/dn473006.aspx

  • My wired mouse(s) no longer click: Yosemite

    A few days after upgrading to Yosemite, by wired mouse started acting funny.
    I restarted the computer and now I can't do anything.
    The mouse will move around, but I can't select anything and I'm perpetually stuck on the start up screen.
    I've tried a few different mouses (none wireless), unplugged and plugged them in a million times into different USB ports, restarted the computer several times.
    Very frustrating.
    (New MacPro)

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM

Maybe you are looking for

  • How can I remove the forced U2 songs from my iphone without synchronizing?

    Hello. I have about 100 songs merely on my iPhone, nowhere else. Apple moved somehow these U2 songs on my iPhone without permission. Now it is like having an undesired cupboard standing in the middle of my living room and I cannot remove it. A synchr

  • Get Error Message "itunes cannot run because some of its required files ...

    complete message that i see in a pop-up window -- "itunes cannot run because some of its required files are missing. Please reinstall itunes". I check windows update. Microsoft says I'm up to date. When I reinstall ipod off the CD and/or itunes/quick

  • Access function from a loaded external SWF

    So I have 2 swfs, one is mainly used to loading the other. The problem I have is that I'd like to use a "onClickPause" function from the embeded swf after pressing a button. Unfortunately I'm getting this error: ReferenceError: Error #1069: Property

  • Problem regarding Materialized View

    Hi, I have a master table "nms_num_schm" on SID-SLBANCS and its corresponding materialized view "mlog$_nms_num_schm". The MV is supposed to move data from this master table to a table "nms_num_schm_mv" on SID-ORCL. The MV is set to select data after

  • Can I select which components will have auto binding turned on?

    To be honest, the only reason I don't use JDeveloper full time is due to this reason only. Can I select which components will have auto binding turned on? I don't see the need or reason to bind every single component in the page to your backing bean.