Wired Networking if you can...

With all the complaints about the ATV and wireless that I've read on here (not to discount any of those mind you) I decided to check what kind of throughput I could get over my simple switched ethernet connection. The result? During syncing my Mac Mini (over 100 Mb ethernet) was able to sustain throughput of 10.5 MB/sec and burst up to 11.7 MB/sec (thus between 84 and 94 Mbps throughput). The Apple TV has got to be one of the best devices I've ever worked with when it comes to throughput over wired networks. I don't get that can kind of speed in between my Mac Mini and my PC. Moral of the story: If you can run a cable, run a cable and save yourself the headaches of wireless.

Yes I agree about the ethernet , make sure you use cat 6 cable. I get sustained thru put of 11.78 M/sec although wireless N set at 5 GHZ and multi cast at 12 I still get 10.5 peak but around 8.5 to 9.5 average.

Similar Messages

HT201210 after a software update & then a restore why does my iphone say"network lost, you can select a different one in settings"?

?

Have you bothered to contact your carrier to see if there is a tower outage/problem in the area? Believe it or not, these things do happen.

HP LaserJet Pro m201dw suddenly not printing via ethernet (wired) network using Mac OS 10.10.1

Hi,
My brand-new HP LaserJet Pro M201dw is suddenly not cooperating when I go to print using my Mac. I had it set up following the directions which closest matched my OS and it worked perfectly for one week; today suddenly it won't cooperate. The printer is seen on the network. I have deleted and re-installed it from my System Preferences several times. I have rebooted my computer. I cannot seem to get it to work. Even the HP Utility is having difficulty. The HP Utility is suddenly slow and often needs to be force-quit as it hangs when I navigate to other applications (web browser, etc.) while waiting for it to respond to clicks. Most often the HP Utility shows the printer in the status ara as "Device Status: Unknown" and "Supplies: Unknown" which it wasn't having issues with yesterday.
Can anyone help me troubleshoot this device? Is there better documentation than the basic setup page here on HP? What about adjusting some setting in the printer web page (which I can access) - is the answer in there?
Thank you.

Hi @td2243,
I see that you are having issues printing over the wired network. I would like to help you out with this issue today.
Try and ping the printer.
On the Apple menu bar, click Go, then click Applications, then Network Utilities. (you can go to the finder and type in Network Utilities)
Click on PING from the bar at the top of the window.
Enter the IP Address of the printer and click Ping.
Did you get any replies back?
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
Try printing again.
Here is some more information on this issue.
A 'Network Product(s) Not Found' Error Displays for the HP LaserJet Pro M201 and M202 Printer Series...
How is the printer name listed in Printers and Scanners? You may provide screen shots if you like.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I will Paypal you $100 if you can resolve this Port Forward problem

Believe me when I tell you, If you are the person who fixes this problem, I will GLADLY Paypal you $100.
This is so unbelievable. Short story is, after 12 hours of paid support through Support RIX, 6 hours with TWC support, and 4 different modems there isn't a single person in these groups that can get ports forwarded on my Linksys E4200 router.
I am running a fresh copy of windows 7 with all updates and no anti virus installed. I purchased a Motorola ARRIS SURFboard modem 200 series DOCSIS 3.0 so I have no double router issues. Before I was using the TWC moden/routers in bridge mode.
I have no problem setting a static IP or configuring port forwarding. It doesn't matter if I have windows firewall on or off. I can't get an outside port checking website that can verify an open port.
I am trying to play Battlefield 4 using the port forwarding request they provide.
If I run a local port check program on my computer it will confirm the ports open. Ok, Fair enough. They tell me the outside port checking utilities will say the port is closed unless I am running the program that uses these open ports.
SO I run the game and check and it always says port closed. One of the ports I want to open is 80. It has to be open to get internet anyway but it still shows closed using the online port checking websites.
I connected the computer to the modem. No router. I keep getting ports closed or filtered when I check through 6 different port checking sites. Leads me to think their is some kind of block in the ethernet card software.
Its a Realtek PCIe GBE Family controller with a driver date of 8/26/2014. Latest one I could find.
I think its an ethernet card filter. Just my thoughts. Here is the current adapter card settings.
Advanced settings on Ethernet card
Auto Disable Gigabit/ Disabled
Flow Control/ RX & TX Enabled
Green Ethernet/ Enabled
Interrupt Moderation/ Enabled
IPv4 Checksum Offload/ RX & TX Enabled
Jumbo Frame/ Disabled
Large send Offload v2 (IPv4)/ Enabled
Large Send Offload v2 (IPv6)/ Enabled
Network address/ You can check the box for Value and add one. Currently its checked to Not present
Priority & VLAN/ Enabled
Receive buffers/ 512
Receive Side Scaling/ Enabled
Shutdown Wake-on-Lan Enabled
Speed and duplex/ Auto Negotiation
TCP Checksum Offload (IPv4)/ RX & TX Enabled
''''''''''''''''''''''''''''''''''''''(IPv6)/ RX & TX Enabled
Transmit buffers/ 128
UDP Checksum Offload (IPv4) RX & TX Enabled
'''''''''''''''''''''''''''''''''''''''(IPv6) RX & TX Enabled
Wake on Magic Packet/ Enabled
Wake on Pattern match/ Enabled
WOL & Shutdown Link Speed/ 10 Mbps First
I used a port tester downloaded from PCWinTech.com v3.0.0. It says the ports are open. When I close port 80 it says port 80 is closed. My problem is nothing outside my network can confirm an open port. It always states port closed.
The game I am playing is Battlefield-4. I have played all of the campigns without any problem but once online it crashes. The BF-4 community says I need to open 5 single ports and 5 port ranges. This is what I am trying to do.
We have tried an ARRIS router modem, a Ubee router modem (both in bridge mode) and are now using a motorola modem. All with the same problem. We checked the ports during game play and they all say closed.
I will post pictures of my current router settings.

What model router do you have?
What Firmware version is currently loaded?
What region are you located?
What is your current model ISP modem your using now?
What ISP Modem service link speeds UP and Down do you have?
Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
Router and Wired Configurations
Setup DHCP reserved IP addresses for all devices ON the router. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
Ensure devices are set to auto obtain an IP address.
If http://en.wikipedia.org/wiki/Ipv6 is an option on the router, select Local Connection Only.
If you set up port forwarding, disable uPnP and test.
When you check for port status, you have to be actively using the port before you scan check as you may get a false negative if your not using the port. If your using the port then check the status, you should get an accurate result.
I would try using Port Range Triggering instead of PF and set up the port as follows for your PC that your gaming with:
0 thru 65535. A bit less hassle to set up then all those different port rules.
PC 3rd Party Security Software Configurations
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired LAN PC while testing.
Disable any downloading client software managers, i.e. Torrents or similar.

Wired network printer

Hi all,
I red here how to set up wireless networks and its grate.
I have in office 4 computer (windows vista) and now I have switched my computer to imac and I have the **** of time to set up my wired network printer.
Can you guys help me and tell me how to set up my imac so I can print on printer what is on wired network.
Any help will be grate
And yes I am right now downloading the driver for the printer :-))
Thank You

Thanks guys.
I just find out what is the problem.
The network what is set up in my work is running on vista, and the printer is running trough a main computer. So what I need is to by able to print trough the main computer (vista). I just red here about it a lot and I have no idea what to do now
If I understand the information right I have to setup network connection with the vista main computer and my Imac and after that I have to set up the printer connection.
I have absolutely no idea how to do it.
Can you guys help.
Thank you

P1102w with USB, wired network print problems

Net work is a wired LAN, all workstations run Windows XP SP3
Installed Laserjet P1102w using USB cable. Turned sharing on. Was able to install P1102w on other workstations as wired network printer - But can not print from network work stations - document just sits in print que - Printing from the station printer is hardwired (USB) to works fine

All workstations need to have the printer software installed.
If that does not work, make sure the firewall (on the host and/or remote) stations are not blocking access to the printer. Windows software is usually not the problem, it is more often the antivirus software's firewall. Disable it and retest.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can you split the wired network ports through a sub router in the time caps

I have recently switched my office from PC to Macs, (MacBookPro and IMac, with a Time Capsule (1Tb).
I have the three wired network ports allocated to some newtwork based equipment and was wondering if I can put an network splitter in (such as a multiport D-link) to create another two wired ports?
Thanks for any response!

Hello JeremyHeighton. Welcome to the Apple Discussions!
Yes, you can add an Ethernet switch to any of the Time Capsule's LAN ports to increase the number of available LAN ports for additional wired clients.

Can you not sync wirelessly with a desktop PC on a wired network, while your iPhone is on the network wirelessly??

Can you not sync wirelessly with a desktop PC on a wired network, while your iPhone is on the network wirelessly??

I also thought that this was the case, but that is incorrect. Please see my previous post below:
I was having the same problem with an iPhone 4 and Windows XP. I finally fixed the issue! I read several posts over the past month telling me to make sure that both the PC and iPhone were on the same network. I thought that both were on the same network; however, I was using my "Guest network" to connect my iPhone to my Airport Base Station. In order for both devices to be on the same network, the first 3 numbers of both IP addresses must match. For example, if the PC's IP address is 199.167.1.X, the iPhone's IP address must be 199.167.1.Y. I signed onto my password-protected network from the phone just to see what IP address it would use. As soon as I logged on, my iPhone started to sync wirelessly. I don't know if this will work for anyone else, but I would suggest comparing the IP addresses of your PC and iPhone before doing anything else. For those posting that the PC and iPhone must be on the same Wireless network, my PC is hard-wired to the Airport Extreme and it still works!
My Setup:
iPhone 4 (running IOS 5.0.1)
Dell PC (running Windows XP SP3) (no wireless network card)
Airport Exteme Base Station (5th Generation & updated firmware)

TS1398 I have an iPad mini, because of my work network firewalls I am not able to use the airprint function to print. I was told you can direct connect to a printer. I am not sure how as I have not seen any cables for a lightning connection to a printer c

I have an iPad mini, I am connected to my work wireless connection. My printer also is on the same wireless network, however I am not able to print to my airprint enabled printer through this wireless connection. Is there a way to direct connect to the printer via a cable ?
I am missing something here on the connection. I am thinking possibly a firewall here at work will not allow me to use the airprint function. Help ?

There is no support for wired printing.
It is probably a firewall issue, possibly where all inbound communications are blocked. Since you're at work, I'd call your work IT department and find out from them what you can/can't do.

Time Capsule - Can it run as DHCP router, create a wireless network and plug into switch for wired network all at the same time?

I have a closet with Wired connections from all over the house terminating in it. I also have the internet modem and a switch in this closet. My old setup was a netgear in the closet creating a wireless network and also feeding the Ethernet ports all over the house. In my room, I had an Airport express (a month old) bridging the wifi to make the wifi network larger. The Express was hard wired from the wall and my mac mini was using it's wifi (printer was plugged into other ethernet port). Everything was working great.
Fast forward to last week. My Netgear died. So, I bought a time capsule. My plan was to move the Express to the closet and have it create the wifi network and also then run cat 5 cord from express to the switch to feed all the wired wall plugs. Reset it and set it up to create the wifi network as well as DCHP NAT. Wireless was running great on it. Then I plugged in the Cat 5 in the second Ethernet Port to the switch. Wifi stopped working and none of the computers would connect using wired connections either. They would see a 'network' but nothing would work. I would unplug the Cat 5 feeding the swtich and the wireless would start working again. Plug the Cat 5 back in and wireless would stop.
So I thought I would try the Time Capsule in the closet and see if I could get it to work. Pretty much the same thing, except at this point I figured out if I went in and told it NOT to create a wifi network the wired portion worked fine and all the wired computers in the house worked fine. Of course, then I didn't have Wifi.
I'm not clueless when it comes to networking, but I can NOT figure this out! Can either the Time Capsule or Express Create the wifi network AND also feed the data to the switch for all the wired computers?
To simplify this is what I want my end result to be. I prefer the Time Capsule to be the wireless connection extender, but if I have to have the Express do it, I'm fine with that.
1. Express in the closet creating the wifi network as well as feeding the data to the wired connections via my switch.
2. have the Time capsule in my room at the opposite end of the house plugged into the hard wired connection to extend the wrieless network as well as have wired connections such as my printer and my Mac Mini.
If I can get #1 to work, I don't think I'll have any problems with #2. Help!

I have an equally complex setup with a managed switch actually but I have never seen the TC have this kind of issue.
What I do notice is you have changed the TC from defaults.. you are using a non-default IP range.
I have run across issues like this where people move things from default.
I would like you to start over.. factory reset the TC. That will set it back to default router mode.
Do the min setup on the TC..
1. Change all names from what you were using. That includes the TC name and wireless name/s
Make them short, no spaces and pure alphanumeric because that is the correct way to network. Apple default names with spaces and apostrophes are fundamentally bad.
2. With just the TC plugged into the switch.. and a single computer connected by ethernet. Power cycle the whole network.. this allows the switch to clear all the old MAC address.
3. Test on the computer just ethernet. Turn the wireless off.
The computer must use dhcp and must get an ip from the TC.
It has to get the correct Router.. ie Gateway.. I wish apple could stick with proper network terminology.
And it must get same address or valid DNS server address/es.
If it fails.. please plug ethernet directly to the TC.. bypassing the switch.
You should get the standard IP addressing and internet connection.
If not please post the screenshot from the Mac of the network preferences showing the ethernet setup.
I need to see what address it does get. I need you to make sure the ethernet is the TOP of the list. So rearrange the order of network connection. With the airport off it should just go to the top of the list.
If it appears to be working .. but a browser cannot connect, open a terminal and ping an internet address.
Ping the actual gateway address the ISP gives you and ping the ISP dns address.

Can I use the Time Capsule as a backup drive and wired network switch? I do not want to use the wireless part as I already have an ADSL 2 Wireless Router for that. Thanks.

Hi
I just went from PC to MAC. Have a MAC Mini and wanted to get a time capsule for backups. I would like to use it as a wired device instead of wireless. Would me connecting it to my router do the trick? Can I then use the LAN ports in the back of the capsule like I would a network switch? Can I just disable the wireless router part of the capsule as I already have an ADSL2+ Wireless Router.
Thanks

I wanted to run a cable upstairs from the switch downstairs so the Time capsule becomes my upstairs switch (as I only have Wireless upstairs at the moment. That will work right?
Cheers.
Yes, that is also fine.. ethernet being the cable you run.. !!
You still don't have to use a TC.. which is still a rather expensive box for the job.. an Airport Extreme would offer the same exactly minus hard disk for cheaper price and more than likely better lifespan.. TC with internal power supply run too hot.

Airport Extreme wired network can't assign IP address, but wireless works

*Problem details:*
We have three computers intermittently on, wired into the ethernet LAN managed by the Airport Extreme.
We have a few more computers that connect to the wireless network managed by the same Airport Extreme.
As far as I know, no fancy settings hijinks have been attempted. I manage the router, and I only plugged the Airport into the cable modem and connected all the wires to the computers. The WiFi setup went a similar way -- I just turned it on and it sorted itself out. This was eight months ago, mind you -- everything has been going quite well up until this weekend.
But! I got home from a trip this weekend to discover that all the machines that connected over the wired network could no longer get a connection to the internet. Any machine connected over the wireless network, however, was working just fine. Indeed, my macbook pros couldn't even see the Airport Extreme when I turned off their WiFi, connected them over Ethernet and opened the Airport Extreme configuration app!
The wired machines complain that they have a self-assigned IP address. Sometimes, after resetting everything, they look like everything's fine for a moment. Like I said, ordinarily my macbook pro does not even recognize the router over the wired network. However, after reverting to factory defaults and restarting the Airport, the laptop did see it (until a few minutes went by and it realized something was wrong).
I figured that renewing my DHCP lease would fix this problem, but it did not. Nor did turning off Passive FTP Mode (PASV) under Proxies in the Network configuration pane.
I have tried resetting the router to factory defaults, power cycling the modem and router in various configurations, etc. but nothing has worked. In addition, I have verified that connecting any machine to the ethernet directly from the modem will work, so the problem is definitely being introduced by the Airport Extreme.
So I guess my question is: what do I have to poke to return everything to normal? I'd like working wired and wireless networks again.
*Some last few details:*
The Airport is running 7.5.2, but downgrading to 7.4.2 produced no tangible difference.
I have an Ubee D3.0 modem. All lights are green and blinky except the DS light, which is solid amber (and it is green when the modem is wired directly to one of my computers -- it's only amber when connected to the Airport).
Some of the machines that can't connect to the wired network are PCs, so it's not just an OSX thing.
My roommate's XBOX 360 can connect to the internet over the wired port. It doesn't have WiFi, so I'm pretty sure there's no way it could be fooling me.
Thanks in advance for any advice you can muster.
EDIT FOR APOLOGIES:
I didn't realize I was posting this in the "Airport for Windows" section. While a Windows computer's connection is a concern, I would much rather get my Macs online and deal with that first. I can't figure out how to move the message myself.

*An update:*
Several days later, this issue seems to have fixed itself. I suspect there may have been Funny Business on my ISP's end (but then again, it's an ISP).

MBP can no longer access a wired network

Just like week I could no longer access an academic wired campus network.
The IT department says they can see my MBP on the network, but the MPB no longer can access the network.
I can take the same MBP to another place of employment and gain access to their wired network.
As a caveat this same MBP can access the academic wireless network with no issues.
No thing has changed on the academci wired network since last week.
Thoughts?
Thank you,
Reed

Leopard sets your mac to avoid being a master browser so you don't see other shares in finder.
There are many ways around it but if you run a network with few machines and that is the only mac the fastest is to launch terminal as administrator and issue the following command:
sudo pico /etc/hosts
Add a line at the end with the IP address of your NAS, this is what I have in my hosts
192.168.0.100 Netdrive
Hit option X and save the file. Reboot the machine the NAS will come up immediately

HT2421 If I attach a hard drive to the USB port, can I access it from the wired network, while simultaneously creating a separate wifi network with NO access to the hard drive?

I already have a wireless network (call it Network A) with connectivity to various wired and wireless devices. I have a USB hard drive that I directly attach to my MacBook Air. I use it for Time Machine backups and general storage. I would like to move this drive to an AirPort Extreme. I would like to continue to be able to reach it via Network A, but also use the AirPort to create a guest Network (Network B). I don't want the guest network to access the hard drive.
Now, I know I can plug a hub into the USB port and put (I hear up to 3) hard drives on it. Can I determine which ones are accessable by Network A, and by Network B?
Bonzo...

Several things to consider.
You cannot create a wireless network for guests if the AE is bridged. It has to be the main router in the network.
You cannot use the existing TM backups on the USB drive.. if you plug into a network it will need to be wiped.. and only AC model can produce reliable TM backups.. the earlier models are not reliable for TM backups.
See http://pondini.org/TM/Airport.html
These two factors alone may be enough to make you reconsider.
If you can create a guest network.. and you can overcome the limitations of airdisks.. then any person on the guest network should not be able to access the disk drive.. but if you wish to go ahead Bob Timmons might be able to confirm it.. I stay away from USB drives on routers.. I do not and will not use a router as a NAS.. it is underpowered and simply unsuitable long term.. a cheap single disk NAS is many times faster.. more reliable.. and has a marvellous thing called backup.. no USB disk or even internal disk in a TC can back itself up. .nor can TM backup network drives.. so any data you store on a USB drive is going to be gone one day.. unless you go to great lengths to back it up .. to where.. another USB drive plugged into another router somewhere.. the definition of slow.. should be copying files between two usb drives in an apple network using wireless. You will experience new levels of pain and suffering.. likened to the belly of the Sarlacc.

Trying to use HPLJ 1102w as a wired network printer. How do you configure the network settings?

I have an HPLJ 1102W and I want to use it as a wired printer on my LAN. The trouble is, the easy setup utility is geared toward wireless networking and the ethernet interface will not get a DHCP address from the LAN. In order to get an IP address, I have to go through the wireless networking configuration settings. Can anyone point me in the right direction on how to use this printer as a wired network printer?
thanks,

Hi,
The HP LaserJet P1102w provide USB or wireless network interface only.
the product do not include any ethernet card, as you may also find by its spesification System Requirements below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01999607&tmp_task=prodinfoCategory&cc=us&dlc=en...
Connectivity: Hi-Speed 2.0 USB port / Wireless 802.11 B/G (P1102w only)
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Wired Networking if you can...

Similar Messages

Maybe you are looking for