Wired problems... please help urgent!!!

Hi all, recently I´m having wired problems in my computer... This describes the problem:
Laste weak:
-Computer ´not starting: it was allways hanging up in the Platinum screen at startup;
-next when it started after reboots, one of my dvdrw drives didnt work (the tray didnt open and windows was unable to show the drive in My Computer... this happened a few times before after installing nvidia ide drivers, but after i unninstalled them, it happened a few times 1 or 2 times again);
-2 or 3 times the computer didnt start again couse it didnt boot and this message appeared (disk not found please insert system disk or something like that)
-After changing IDE cable in the hard drive the problem was gone for one day or two.
Yesterday:
-computer started giving those blue screens of death after being a while in windows (happened several times);
-the disk when working like hell (making disk defragmentation and other things) reached critical tempereatures (42 ºc showed in HDD Heath) making wired noises turning on and off
-after restart it wouldnt start windows (started NVIDIA mac adress client or something like that) the boot in bios has the HD in the 1st priority.
Can someone help me? Im going crazy with my computer... im suspectin about my hard drime but... dont know...
this is my rig:
Amd Athlon 64 2800+ not overclocked
MSI k8n Neo platinum nForce3 250Gb whith 5.11 nvidia drivers
1 Gb memory 2x512Mhz 400 kingston
ATI Radeon 9600xt with Omega drivers Catalyst 5.12
120 Gb Samsung HD sp1203n
450w Power supply

Hola,
I'm affraid I have no good news for you as it looks like your computer's Hard Drives is going down.
URGENT ATTENTION : Backup all your data inmediatly as it's on high risk of being lost.
Once you have done this, try (if you can) to test that hard drive in another computer. If you get the same
results in other computer (clicking and spinning up and down) then the hard drive is damaged for sure.
NOTE:
Be sure to test it well, because if may seem to work fine for several minutes or even hours. But if the drive
is indeed damaged, the problems will be back sooner or later.
For best results, download (from your hard drive manufacturer's support page) the appropiate diagnostic tool,
and once you have it, run it from DOS. Your hard drive manufacturer, should have instructions on how to use
the tool, please read them carefully and follow them correctly in order to get the most accurate results once
you run the tool.
In the case the hard drive is faulty, then replace it as soon as you can.
If not, then remove the cable you're using to connect your hard drive to your mainboard and use a new one,
and see if the problem persists or not.
Let us know how it goes ok ?
Be well and good luck

Similar Messages

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

Starting tomcat problem, please help urgent

I installed jwsdp on windowsXP . The log file gives this following error when i try to start tomcat:
java.util.zip.ZipException: Access is denied
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:127)
     at java.util.jar.JarFile.<init>(JarFile.java:138)
     at java.util.jar.JarFile.<init>(JarFile.java:80)
     at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1081)
     at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
     at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Bootstrap: Class loader creation threw exception
java.lang.IllegalArgumentException: addRepositoryInternal: java.util.zip.ZipException: Access is denied
     at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1109)
     at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
     at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
PLEASE HELP ,URGENTLY NEEDED TO SHOW SOME WORK ON THIS.
THANKS
jim

Hi,
I have a similar problem, i try to deploy a JAR file built on AIX 5.2 platform (jvm 14.1) into Tomcat 5.5.7 running on Windows platform when i try start Tomcat it's fail with the fellowing message
SEVERE: Error deploying web application directory usi
java.lang.IllegalArgumentException
     at java.util.zip.ZipInputStream.getUTF8String(ZipInputStream.java:299)
     at java.util.zip.ZipInputStream.readLOC(ZipInputStream.java:238)
     at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:73)
     at java.util.jar.JarInputStream.<init>(JarInputStream.java:58)
     at java.util.jar.JarInputStream.<init>(JarInputStream.java:43)
     at org.apache.catalina.util.ExtensionValidator.getManifest(ExtensionValidator.java:368)
     at org.apache.catalina.util.ExtensionValidator.validateApplication(ExtensionValidator.java:187)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:3942)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
     at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:909)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:872)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1106)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1019)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1011)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:440)
     at org.apache.catalina.core.StandardService.start(StandardService.java:450)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)

Triggers problem - please help - urgent !!

To all experts, please help me with this problem - need answer
urgently. Thanks in advance.
Using Oracle 8 Rel 8.0.6
I have 2 tables (table Y, table Z).
In the 'after insert upd del on each row trigger' (lets call it
AIUD trigger)on table Y, based on certain criteria, I insert a
record in table Z.
New requirement is that whenever a record is inserted in table Z
(fyi, inserting any record in table Z is possible only when
records are inserted in table Y as mentioned earlier thro the
AIUD trigger - i.e. there is no frontend way to insert records
in table Z), if certain (new) criteria is satisfied, I should
insert 1 record in both, table Y and table Z.
I tried to create meet the new requirement by adding code to
existing AIUD trigger but ran into mutating tables error. So I
dropped this idea.
I have now created 'after insert on each row trigger' (lets call
it NEW_TRIGGER) on table Z to meet the new requirement but have
these 2 problems :
1) the trigger always compiles with errors
2) if I still go ahead and insert a record in table Y, I get the
foll error msgs :
ORA 4098 - NEW_TRIGGER is inv
ORA 6512 at line xxx on AIUD
ORA 4088 error during execution of trigger AIUD
What is the best way to work on this requirement or what am I
doing wrong ?
Thanks again,
AG.

Your restatement of the problem merely confirms what the previous
posting said. You cannot write a trigger on table Y that inserts
a record into table Y: that's the mutating trigger problem
(there's oodles of postings on the subject, not to mention
online Oracle docs). You could write a trigger on table Z that
inserts into table Y - but you need to be able to see the value
I3 which (presumeable) you can't.
One solution is to use code the trigger on table Y to submit a
call to DBMS_JOB which initiates a procedure that inserts a
record into table Y.
You must remember that the new record in table Y must never
include the value I3, otherwise you'll end up w/ an infinite
loop.
rgds, APC

Installation problem, please help, urgent needs,

I have install the FCP 7 into my MBP, and updated, but in the "add behavior" tap i don't have those new behavior like "text-basic" "text-continuous" "text-energetic" etc..... how can i add it back?
urgent needs, please help

fixed

D:\oracle\product\10.2.0-Console access problem-please help urgent.

I have installed D:\oracle\product\10.2.0, each times i create a db on it the console work fine, but when I close my computer then restarts it I can get in to the console again.
some people said that one shouldn't be on net while installing it, so I wasn't on net.
Then I tried to start the service as windows service it can not start.
where can I look in the oracle config ? to deal with the problem ?
Thanks.

Is your computer configured with DHCP? If so, did you configure the loopback adapter?
http://download-east.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABGCEAI
Logs are written to ORACLE_HOME/<machine_name>.<dbsid>/sysman/log

Mac OS x/ finder/ hard drive/ start up.... problems PLEASE HELP URGENT!!

Right
firstly my finder icon on the dock the little triangle to show it on disapers. meaning all the icons on the desktop disapear! Then i restart to get them back but it loads the grey screen then goes to blue and nothing else. So i restart but hold down the ALT key to see drives and i calls my HD EMI drive or something so i boot from Backup cd 1 and have to reload Mac OS x Again for the second time today! what is going on and how can i fix it?

Michael,
First,Back up all important files.Then...
Run Apple Hardware Test from OS X Install Disk #1.
If it reports any problems,believe it and call AppleCare to have MacBook repaired.
If AHT reports "No problems found",I'd recommend an Erase and Install of OS X.
Let us know the outcome either way.
Jim
PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM Mac OS X (10.4.8)

ZIP problem - Please help -URGENT

Below there is a program which updates an OpenOffice file, in fact a zip file.
It works fine on window but on Netware I receive an exception
java.util.zip.ZipException: invalid entry CRC-32
(expected oxffffffffc0f3d518 but got 0xc0f3d518)
Any ideas is great appreciated. Thanks!
================
import java.io.*;
import java.util.*;
import java.util.zip.*;
import java.util.jar.*;
class test {
public static void main(String []args){
     test ob=new test();
     ob.updateZipEntry("data://test.sxw","content.xml","data:");
void updateZipEntry(String jarName, String fileName, String location){
     try {
     File jarFile = new File(jarName);
     File tempJarFile = new File(jarName + ".tmp");
     JarFile jar = new JarFile(jarFile);
     boolean jarUpdated = false;
     try {
     Manifest jarManifest = jar.getManifest();
     JarOutputStream tempJar = new JarOutputStream(new FileOutputStream(tempJarFile));
     byte[] buffer = new byte[1024];
     int bytesRead;
     try {
     FileInputStream file = new FileInputStream(location+"//"+fileName);
     try {
     JarEntry entry = new JarEntry(fileName);
     tempJar.putNextEntry(entry);
     while ((bytesRead = file.read(buffer)) != -1) {
     tempJar.write(buffer, 0, bytesRead);
     finally { file.close(); }
     for (Enumeration entries = jar.entries(); entries.hasMoreElements(); ) {
     JarEntry entry = (JarEntry) entries.nextElement();
     if (! entry.getName().equals(fileName)) {
     InputStream entryStream = jar.getInputStream(entry);
     tempJar.putNextEntry(entry);
     while ((bytesRead = entryStream.read(buffer)) != -1) {
     tempJar.write(buffer, 0, bytesRead);
     jarUpdated = true;
     catch (Exception ex) {
     System.out.println(ex);
     tempJar.putNextEntry(new JarEntry("stub"));
     finally { tempJar.close(); }
     finally {
     jar.close();
     if (! jarUpdated) { tempJarFile.delete(); }
     if (jarUpdated) {
     jarFile.delete();
     tempJarFile.renameTo(jarFile);
} catch(IOException e) {}
} // end updateZipEntry
}

It's Netware for sure.
That's the only error message I get:
java.util.zip.ZipException: invalid entry CRC-32
(expected oxffffffffc0f3d518 but got 0xc0f3d518)
Why does it run on w2k?
Thanks!
import java.io.*;
import java.util.*;
import java.util.zip.*;
import java.util.jar.*;
class test {
public static void main(String []args){
     test ob=new test();
     ob.updateZipEntry("data://test.sxw","content.xml","data:");
void updateZipEntry(String jarName, String fileName, String location){
          try {
           File jarFile = new File(jarName);
           File tempJarFile = new File(jarName + ".tmp");
           JarFile jar = new JarFile(jarFile);
           boolean jarUpdated = false;
           try {
              Manifest jarManifest = jar.getManifest();
              JarOutputStream tempJar = new JarOutputStream(new FileOutputStream(tempJarFile));
              byte[] buffer = new byte[1024];
              int bytesRead;
              try {
                 FileInputStream file = new FileInputStream(location+"//"+fileName);
                 try {
                    JarEntry entry = new JarEntry(fileName);
                    tempJar.putNextEntry(entry);
                    while ((bytesRead = file.read(buffer)) != -1) {
                       tempJar.write(buffer, 0, bytesRead);
                 finally { file.close(); }
                 for (Enumeration entries = jar.entries(); entries.hasMoreElements(); ) {
                    JarEntry entry = (JarEntry) entries.nextElement();
                    if (! entry.getName().equals(fileName)) {
                       InputStream entryStream = jar.getInputStream(entry);
                       tempJar.putNextEntry(entry);
                       while ((bytesRead = entryStream.read(buffer)) != -1) {
                          tempJar.write(buffer, 0, bytesRead);
                 jarUpdated = true;
              catch (Exception ex) {
                 System.out.println(ex);
                 tempJar.putNextEntry(new JarEntry("stub"));
              finally { tempJar.close(); }
           finally {
              jar.close();
              if (! jarUpdated) { tempJarFile.delete(); }
           if (jarUpdated) {
              jarFile.delete();
              tempJarFile.renameTo(jarFile);
     } catch(IOException e) {}
} // end updateZipEntry
}

Showing total of PRICE using 3 tables PROBLEM, please help URGENT??

Hi i am trying to calculate the order total in my database for a given order number.
I need to use 3 tables for this:
customer table:
CREATE TABLE customer
     (custid NUMBER(5),
     last VARCHAR2(30) CONSTRAINT customer_last_nn NOT NULL,
     first VARCHAR2(30),
     mid_initial CHAR(1),
     cadd VARCHAR2(30),
     town VARCHAR2(30),
     city VARCHAR2(30),
     postcode VARCHAR2(10),
     dphone VARCHAR2(10),
     ephone VARCHAR2(10),
     CONSTRAINT customer_custid_pk PRIMARY KEY (custid));
orders table:
CREATE TABLE orders
     (orderid NUMBER(8),
     orderdate DATE CONSTRAINT orders_orderdate_nn NOT NULL,
     methpmt VARCHAR2(10) CONSTRAINT orders_methpmt_nn NOT NULL,
     custid NUMBER(5),
     ordersource VARCHAR2(20),
     CONSTRAINT orders_orderid_pk PRIMARY KEY (orderid),
     CONSTRAINT orders_custid_fk FOREIGN KEY (custid) REFERENCES customer(custid),
     CONSTRAINT orders_ordersource_fk FOREIGN KEY (ordersource) REFERENCES           ordersource(ordersource));
And finally orderline table:
CREATE TABLE orderline
     (orderid NUMBER(8) CONSTRAINT orderline_orderid_nn NOT NULL,
     invid NUMBER(10) CONSTRAINT orderline_invid_nn NOT NULL,
     order_price NUMBER(6,2) CONSTRAINT orderline_order_price_nn NOT NULL,
     quantity NUMBER(4) CONSTRAINT orderline_quantity_nn NOT NULL,
     CONSTRAINT orderline_pk PRIMARY KEY (orderid, invid),
     CONSTRAINT orderline_orderid_fk FOREIGN KEY (orderid) REFERENCES orders(orderid),
     CONSTRAINT orderline_invid_fk FOREIGN KEY (invid) REFERENCES inventory(invid));
INSERT INTO CUSTOMER VALUES (107, 'HARRIS', 'PAULA', 'E', '1156 WATER STREET', 'KENSINGTON','LONDON', 'SW1 6DS', 02071555589, 02071555590);
INSERT INTO ORDERs VALUES (1057, TO_Date('05/29/2001 12:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'), 'CC', 107, '152');
INSERT INTO ORDERLINE VALUES (1058, 11824, 15.99, 1);
Here is my code:
SET SERVEROUTPUT ON;
DECLARE
v_odNum NUMBER(8):= &sv_orderNum;
v_price NUMBER(7,2);
v_quantity NUMBER(5);
v_fname VARCHAR2(30);
v_lname VARCHAR2(30);
v_add VARCHAR2(30);
BEGIN
SELECT first, last, cadd, order_price, quantity, SUM(order_price * quantity) AS TOTAL
INTO v_fname, v_lname, v_add, v_price, v_quantity
FROM customer c, orders o, orderline ordl
WHERE c.custid = o.custid AND o.orderid = ordl.orderid
AND v_odNum = o.orderid
DBMS_OUTPUT.PUT_LINE('The total order for' ||v_odNum|| ' '|| 'is' || TOTAL);
END;
Is there anyway of using the SUM function so that i can store the result in a variable and display it similar to the ouput code??
P.S sorry for the length coding, but there is no code tage in the thread that i can see to make it more managable.

A procedure with an OUT parameter which returns the total order cost should work.

Urgent Problem please Help(hayat)

Hello Hi,
I want to Install Form 6.0 With Oracle 8i on Server
mean not personal oracle,
if i install first oracle 8i and then form 6.0 then
they overwrite their homes and vice versa.
What method i use to control this problem.
please help me so that i install form 6.0 on oracle 8i server.
thanks
hayat

Ok, I have read the sun site and downloaded the JDK and saved it to disk in the C:\ drive.
However I still get the same error so I think I must be very stupid and I think the computer knows that.

Please Help - Urgent

Hi everyone, I�m having problems with Java Mail, I have just installed it along with the java activation framework, they are located in the following directories:
JavaMail: C:\jdk1.3.1\lib\javamail-1_2[1]
Java activation framework: C:\jdk1.3.1\lib\jaf1_0_1[1]
I have the classpath set as: C:\jdk1.3.1\lib\mail.jar;C:\jdk1.3.1\lib\activation.jar
When I try to compile the sample code provided with these packages, msgsend.java using Jbuilder 2 I get the following errors:
Error (36): cannot access directory javax\mail.
Error (37): cannot access directory javax\mail\internet.
Error (209): class message not found in class msgsend.
Error (210): class MessagingException not found in class msgsend
Error (134): class Session not found in class msgsend
Error (134): variable Session not found in class msgsend
Error (139): class Message not found in class msgsend
Error (139): class MimeMessage not found in class msgsend
Error (141): class InternetAddress not found in class msgsend
Error (145): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (146): Variable InternetAddress not found in class msgsend
Error (148): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (149): Variable InternetAddress not found in class msgsend
Error (151): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (152): Variable InternetAddress not found in class msgsend
Error (162): Variable Transport not found in class msgsend
Error (170): class Store not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (189): class Folder not found in class msgsend
Error (195): Variable Folder not found in class msgsend
Error (197): class Message not found in class msgsend
Error (197): class Message not found in class msgsend
If I try to use another Java package to compile it I get even more errors (52), I cannot compile it by using the Javac command line compiler, it just says �Bad command or file name�.
Can anyone tell me Why this is happening and how I might be able to fix it please, I need to start learning Java Mail quickly but at the moment I can�t even begin to do this until I can understand how to get this sample code to work.
Thanks Everyone
Noel

First of all... don't post with topics like "Please Help - Urgent". The topic is supposed to reflect what the question is about.
Secondly... think for a second. If mail.jar is in C:\jdk1.3.1\lib\javamail-1_2[1]... why are you with your classpath saying that mail.jar is in C:\jdk1.3.1\lib ?
You classpath is supposed to point directly at you jar-files.
/Michael

HT1338 I have an apple wired keyboard hooked up to my Mac mini. A while ago, the keyboard stopped working. I tried re plugging it in, and nothing's working. The "Bluetooth settings" keeps popping up, but I don't have Bluetooth, it's wired. Please help!

I have an apple wired keyboard hooked up to my Mac mini. A while ago, the keyboard stopped working. I tried re plugging it in, and nothing's working. The "Bluetooth settings" keeps popping up, but I don't have Bluetooth, it's wired. Please help!

System Preferences->BlueTooth and turn it off. Restart and see if that fixes the problem.

PASSWORD FOR FLODERS PLEAse HELP URGENT

HI ALL
please tell me the method of implementing password
provision for some folders/files in the system.
it should ask for password authentification before
opening when i click on the folder.
please help urgent
thanks
belur

Hi Swaroopba,
It can be very well done thru Form based Authentication.
For eg let me explain with respect to Tomcat.
Go to
$TOMCAT_HOME/webapps/examples/WEB-INF directory.
Please add the following code in it.
<security-constraint>
<web-resource-collection>
<web-resource-name>Protected Area </web-resource-name>

<url-pattern>/jsp/security/protected</url-pattern>
</web-resource-collection>
</security-constraint>
Please add the following code in it. And you have to specify the roles for it.
I hope this will be helpful for you.
Or if you want it in an application, please let me know.
Thanks
Bakrudeen

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

Wired problems... please help urgent!!!

Similar Messages

Maybe you are looking for