Wired to wireless help needed please.

Hey all,
I got a small network of 2pcs and a network printer using a wired linksys router. All works great. But I now want to change the wired router out for a wirless one, so we can use some laptops in the office too.
My question is, if I replace the wired router with the wireless one, am Im going to have to reconfigure it all for the new router? Is there a simple way to keep the settings in the wired router and transfer it over to the wireless one?
Im not so good at networking and setting up the wired network wasnt as easy as I thought it was when I 1st did that. It took a couple days and lots of phone calls to get it up and running the way we need it.
The wired network now allows all of us to surf the web, print to the netowork printer and transfer files to each other. And thats what I want to be able to do once I get a wireless router too. But I would hate to get it and it be a nightmare to configure.
Keep in mind, I can setup a wireless router, but when it comes to multi PCs and a network printer, I get a little confusied. Is thats assigning IPs that confuse me.
Any suggestions for a n00b?
Thanks all!

Thank you both for you help. I think Im going to keep the existing hardwired router in place and just all another wireless to it. That sounds easier for a n00b like me.
However, I did want to learn more about the wireless access point thing compaired to a wireless router.
Whats the big difference between the two? I assume the access point is much easier to get up and running?
Thanks again to you both! It helps!
Message Edited by ramman949 on 04-26-200701:52 PM

Similar Messages

  • Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

    Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    Accepted forms of payment  >  http://support.apple.com/kb/HT5552
    Changing Account Information  >  http://support.apple.com/kb/HT1918

  • Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

    Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

    ljm17 wrote:
    ...This keeps happening, everytime I do this type of update, I...
    Then you should know what you need to do... If you don't remember...
    See Here  >  http://support.apple.com/kb/HT1808

  • I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

    I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

    Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable")  and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
    I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
    If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
    iPhone 4s iOS 5.1.1 (9B206)
    Carrier AT&T 12.0
    Modem Firmware 2.0.12

  • New Hard drive, can't access certain aspects. Help needed please

    Hi everyone.
    I have an HP Pavilion dv6-6052ea laptop.
    I've been having problems with the hard drive so got a new one installed.
    My main issues are since getting it back, I can't access any of the original HP installations etc (I've downloaded all the drivers I know about through HP).
    The 2 main things I'm missing are 2 things that came with the laptop.
    1: Beats Audio sound system 
    2: Video Graphics: AMD Radeon HD 6490M (1 GB DDR5)
    and I have no idea how to get them back. Can anyone help. Do I need to install specific drivers? I can't find any trace that they exist on my laptop now apart from the stickers on the laptop! Any help is greatly appreciated. 
    I never had any CD back ups for the laptop. I do have the old HP back up etc saved on a USB but I don't know enough about the folders and files to know what I need to look for. (I still have the old hardrive.)
    Again, any help is massively appreciated. Thank you!
    Tony 

    If you used your HP Recovery Media, all factory install drivers and software would have been installed. If you didn't create your HP Recovery Media when you first setup your computer, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
    If a generic Windows 7 installation disc was used, you will need to install all HP specific driver for your computer. Please try IDT High-Definition (HD) Audio Driver, Intel High-Definition (HD) Graphics Driver, and AMD High-Definition Graphics Driver to resolve your missing drivers issues. Windows 7 64-bit driver for your computer can be found on the HP Pavilion dv6-6052ea Entertainment Notebook PC Drivers page.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • HELP NEEDED PLEASE

    Hi everyone
    Programming help needed here. Any advice would be greatly appreciated!!!
    I have been assigned some work for a program called Processing 1.0 availale at http://processing.org/download
    I was give the 9 individual programs I needed to make however they were converted to Java files from .pde files. The program is based on Java but only runs .pde files and NOTHING else!
    I decompiled the files and got the source code, but it is a slight variation of the original someone made in processing, and needs some tidying to get it to run.
    I think the programs are very simple for a programmer, although I AM NOT.
    CODE is BELOW
    // Decompiled by DJ v3.10.10.93 Copyright 2007 Atanas Neshkov Date: 02/05/2009 13:15:00
    // Home Page: http://members.fortunecity.com/neshkov/dj.html http://www.neshkov.com/dj.html - Check often for new version!
    // Decompiler options: packimports(3)
    // Source File Name: Assign2_1.java
    import processing.core.PApplet;
    public class Assign2_1 extends PApplet
    public Assign2_1()
    SquareSide = 20;
    Rank = Nums.length;
    Side = SquareSide * Rank;
    Green = color(0, 255, 0);
    Yellow = color(255, 255, 0);
    BG = Yellow;
    public void setup()
    size(Side, Side);
    background(BG);
    fill(Green);
    for(int i = 0; i < Rank; i++)
    rect(i * SquareSide, 0.0F, SquareSide, SquareSide * Nums);
    public static void main(String args[])
    PApplet.main(new String[] {
    "--bgcolor=#ece9d8", "Assign2_1"
    int Nums[] = {
    6, 14, 8, 9, 2, 3, 4, 2, 8, 3,
    9, 2, 0, 5
    int SquareSide;
    int Rank;
    int Side;
    int Green;
    int Yellow;
    int BG;
    Edited by: chevy1 on May 2, 2009 7:32 AM

    HELP NEEDED PLEASEShouting is a good way ensure you don't get help. Also you should give a meaningful subject.
    Any advice would be greatly appreciated!!!I suggest you ask a question after providing enough information to be able to answer it.
    Also use CODE tags when posting code as it make the code more readable.
    We are more likely to help people who are trying to learn Java rather than someone who might be looking for an easy way out of doing an assignment.

  • ITunes corrupt file message - urgent help needed please

    I have an iPod video 30GB, i downloded the latest iTunes & Quicktime version, and updated my iPod also to the latest update. When i connect my iPod and start downloading music from the library in iTunes, the iPod keeps on disconnecting and restarting by itself, and i get a message that the file iTunes.exe is corrupt. I tried Apple support and did all what they said by downloading the latest updates and versions, and also did the Chkdsk utility on Windows, but still it did not work, the iPod keep on restarting and i cannot download anything on it, i had it now for a week and did not use it at all because of this problem, can somebody with a technical background help me please, i use Windows XP.

    I have an iPod video 30GB, i downloded the latest iTunes & Quicktime version, and updated my iPod also to the latest update. When i connect my iPod and start downloading music from the library in iTunes, the iPod keeps on disconnecting and restarting by itself, and i get a message that the file iTunes.exe is corrupt. I tried Apple support and did all what they said by downloading the latest updates and versions, and also did the Chkdsk utility on Windows, but still it did not work, the iPod keep on restarting and i cannot download anything on it, i had it now for a week and did not use it at all because of this problem, can somebody with a technical background help me please, i use Windows XP.

  • MP3 burning help needed please

    Hi,
    I'm hoping someone can help me please.
    I'm wanting to burn a mp3 cd but with the songs in separate folders so that when i play them in my car i can flick between the albums instead of having to go through all the singles one after another.
    Does anyone know of a good mp3 burner that can do this, and where to get it from too.
    All and any help in this matter is greatly appreciated
    Cheers
    Paul

    You want them in separate Album folders?
    Put the songs into the playlist.
    Sort the playlist by Album then burn it as MP3* disc.
    This will put the songs into Album folders.
    Likewise, if you sort by Artist, songs will be put into Artist/Album/ folders.
    * Note that only MP3 files will be burned to the disc. If the files are not already MP3 format, they will be skipped.
    If you burn it as a DataCD, it wil work the same except it will copy the files regardless of format. I do this as my CD player will work with both AAC & MP3 formats.

  • WLC Logs!!! Quick Help needed please!

    Hello,
       My client want to check who owned a certain IP address on the WLC and from which AP he was associated. I looked at the system logs in the GUI but couldn't get beyond 6 hours. Is there a place I can download last day logs from CLI/GUI? Or Can I login via SSH and extract the logs via CLI?
    Please this is vital and I appreciate your help,
    Regards,

    Please note that the customer is using Pass-Through Web Authentication for the Guest WLAN.
    Thanks,

  • IPhone 4S - Could not scan for wireless networks - help needed please

    Hi
    Can anyone offer any advice please.
    My 4s has developed an wifi issue. It cant scan for wireless networks My bluetooth is intermittent also.
    I have turned it on/off, rebooted, reset all networks, reset to factory settings, set to airplane mode, set to do not disturb - everything and all to no avail.
    I am under a two year contract with Vodafone and went into their branch at Merry Hill, Dudley today and they failed to help me saying it was nothing to do with them.
    I am at a loss as to what to do. I have not had any accident with my phone and it is still in mint condition.
    Can anyone please offer any suggestions on what to do.
    Many thanks.

    Apple's out-of-warranty policy is a feeble attempt at covering up it's issues and is a clear cut demonstration for their lack of respect for its user base. Their WIFI/Bluetooth dropping issues have been around for several years now and it started within the last 3 IOS updates. Apple engineers acknowledge this problem and don't have a solution yet... this was confirmed at the Genius Bar at their Nashua, NH outlet. My phone is 6 months passed warranty and my Verizon contract isn't up for renewal for another 6 months.
    There are a lot of complaints about this (a LOT), yet Apple continues to stick its head in the sand instead of owning up to providing shoddy hardware and/or glitches software. They certainly don't want to be in the business of replacing phones, so they put the onus on us by charging $200 for a replacement... such a deal for Apple!
    Apple's support communities are basically useless on this subject with a lot of screwy so-called solutions to work around their flaws. I've seen one  fix where you heat up the phone with a hairdryer until the temp warning appears and then refrigerate it for 10 minutes... then BINGO, it's all fixed! Ya right!!!
    Resetting network settings, or all settings (including a complete reset) is ineffective and appears to do nothing more than to further upset Apple users once they realize that they have wasted their time following Apple's so-called fix.
    I just wonder if or when Apple pulls it's collective head out of the sand will they be able to see that their competition has surpassed them by leaps and bounds. There really isn't any good reason to stick with Apple now-a-days since their conscience passed away. Their competition offers superior technology while Apple continues to impress up with new connector technology and placement of their sockets.
    I am finished with Apple and am incredibly sick of their spoon feeding what they want rather than what we want.
    The best way to make Apple improve is to provide them with a taste of their own WIFI/Bluetooth offerings by DROPPING THEM!
    They have abandoned us and have no problem trying to charge us to replace their flawed technology instead of doing the right thing!
    Dale E Alden
    Groton, MA 01450

  • Help needed please for master socket wiring

    I am renovating a house built in the 1970's which I shall be moving into shortly.
    My electrician has put in telephone sockets in two of the bedrooms but when he came to the master socket he found the builders had by mistake cut the wire too short so he could not make a connection.
    The master socket is in the hall low down on the wall and it looks as if the wire comes into the house underground.
    I have spent hours on the telephone trying to get the right person to speak to at BT who tells me I need to contact Open Reach as it is damage and when I eventually found a number to ring them they tell me it is BT's problem.
    In exasperation I telephoned the moving house line as none of the press button numbers seemed relevant.
    I just want a BT person to come and have a look to see what to do but they have told me that I need to give them a date for when I move and they will come and look then.  However, I need the builders to fill in the large hole in where the wire comes into the house so I can have a floor laid.
    Any help would be so much appreciated

    Hi Kh,
    Thank you for your post and welcome to the forum. If you would like a BT Engineer to go out and take a look at your line this can bee arranged when you place an order to activate the service. With the line being damaged by the builder, there will be a charge of around £127.99 to activate the service.
    If you need any help placing your order to activate the service, please drop me an email with any BT account details, along with the address details for you new property. My email address is [email protected]
    Thanks
    Paddy
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Slow Running Macbook Pro Help needed please

    Macbook is running increasingly slow.
    Any help would be much appreciated.
    Please see report below.
    Thanks in advance.
    EtreCheck version: 2.1.8 (121)
    Report generated 17 March 2015 11:48:14 GMT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (17-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,1
        1 2.53 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 709
    Video Information: ℹ️
        Intel HD Graphics - VRAM: 288 MB
        NVIDIA GeForce GT 330M - VRAM: 512 MB
            Color LCD 1920 x 1200
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Time since boot: 9 days 0:51:29
    Disk Information: ℹ️
        Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (310.72 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        HP Deskjet F2400 series
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Startup Items: ℹ️
        MobileBrServ: Path: /Library/StartupItems/MobileBrServ
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.Maps.pushdaemon.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.warmd_agent.plist
        5 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.periodic-weekly.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        7 processes killed due to memory pressure
    Launch Agents: ℹ️
        [loaded]    com.divx.dms.agent.plist [Click for support]
        [loaded]    com.divx.update.agent.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [loaded]    com.divx.agent.postinstall.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Google Drive    Application  (/Applications/Google Drive.app)
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        SiteAdvisor: Version: 2.0 - SDK 10.1 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        OVSHelper: Version: 1.1 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        DivX Plus Web Player: Version: 2.3 - SDK 10.5 [Click for support]
        Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    Safari Extensions: ℹ️
        SiteAdvisor
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 188.16 GB
        Destinations:
            Seagate Expansion Drive [Local]
            Total size: 999.86 GB
            Total number of backups: 1
            Oldest backup: 2014-01-13 12:11:19 +0000
            Last backup: 2014-01-13 12:11:19 +0000
            Size of backup disk: Adequate
                Backup size 999.86 GB > (Disk used 188.16 GB X 3)
    Top Processes by CPU: ℹ️
            17%    softwareupdated
            17%    sandboxd
            15%    WindowServer
             9%    Calendar
             2%    Microsoft Outlook
    Top Processes by Memory: ℹ️
        125 MB    Google Chrome
        125 MB    WindowServer
        112 MB    Microsoft Outlook
        100 MB    softwareupdated
        56 MB    Microsoft Word
    Virtual Memory Information: ℹ️
        48 MB    Free RAM
        910 MB    Active RAM
        885 MB    Inactive RAM
        991 MB    Wired RAM
        89.21 GB    Page-ins
        2.18 GB    Page-outs
    Diagnostics Information: ℹ️
        Mar 15, 2015, 10:56:06 AM    /Library/Logs/DiagnosticReports/Microsoft Outlook_2015-03-15-105606_[redacted].cpu_resource.diag [Click for details]
        Mar 15, 2015, 10:49:14 AM    /Library/Logs/DiagnosticReports/softwareupdated_2015-03-15-104914_[redacted].cp u_resource.diag [Click for details]

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Multiple problems - help needed please

    I've got so many problems that I've completely confused myself. So, if anyone can help….
    I was previously using a D-Link D-320T DSL modem on BT Broadband in the UK. The modem was set up in bridge mode, and hooked up via ethernet to my Airport Extreme (n). The AEBS would use PPPoE and successfully connected to the internet, as well as handling all my network needs.
    Everything worked and everything was fine, allowing screen sharing and file sharing between my Mac Mini, MacBook and MacBook Pro.
    Earlier this week, the internet connection dropped and I couldn't find the cause. Resetting the router and hooking it up directly to my Mac Mini, I connected to it (192.168.1.1) and had it connect to the internet itself.
    It did so, and distributed IP addresses to the Mac Mini…but after 30 seconds my internet connection dropped, and looking in network preferences, I found that the modem had jumped from a router address of 192.168.1.1, to an 82.xx.xx.xx address, which was clearly the public IP address forwarded by my ISP. So it seemed like it was working in a sort of bridge mode still.
    I reset the router numerous times, tried switching it into full bridge mode etc, but the AEBS was unable to use it to connect via PPPoE as before, because the D-Link would play nice for 30 seconds, then jump around with addresses.
    Very strange, but I assumed the modem was just broken.
    I dug out my spare router, being the Netgear DG632.
    I managed to get this hooked up to the internet really quickly, and using an ethernet connection to the Mac Mini, it all appeared fine. However, as I started looking around the internet, I noticed that although google.com would open up, any subsequent links, and indeed any other domains I tried to visit would not open.
    Resetting the router seemed to solve this.
    I then hooked up my AEBS to the Netgear and, after pondering which way to use it, I found the only way I could get it to play nice was to have the AEBS in bridge mode itself, meaning that the Netgear would do all the routing work.
    The MacBook connected to the airport, and all seemed okay….
    …However, I then noticed that the internet connection would randomly drop. Web pages would not open (in any browser), and downloads which were under way could be seen in the Safari download manager to suddenly crash.
    The same was true on the Mac Mini - web browsing stopped at random. I had however hooked this up to the airport via an ethernet cable, I noticed that, although the "internet" wasn't working, other connections like torrents were still active.
    Reconnecting the Netgear router directly to the Mac Mini allowed me to see in its diagnostics that it still held a connection to the ISP and still had an external IP address.
    Again, a reset of the router seemed to resolve things….but only for a few hours. And whilst the Mac Mini seemed resilient, the airport connection to the MacBook was terrible. (I haven't even tried using the MBP yet).
    Furthermore, I noticed that networking between devices had severely been crippled. Although the Mac Mini and MacBook were visible to each other in the shared devices section of finder, clicking the link meant waiting literally four minutes for a connection to establish, and screen sharing timed out, from either direction.
    I then tried assigning everything static IP addresses, but this seemed to confuse matters with the router.
    Under the impression that the Netgear clearly couldn't handle the job of routing my network, I tried to set it up in bridge mode and use the AEBS as before.
    Reading around the internet (on my iPhone at this stage), I realised there was no obvious "bridge mode" option, but I was told to set the device mode as router, and then say "no" when it asks if there are any login details for the ISP (under Basic Router Settings). This was done.
    However, setting up the AEBS with PPPoE had no success, and the connection was never made.
    At this stage, I'm living with a crippled network and two routers, neither of which do what I want.
    Can anybody advise me on a solution to fix either router/modem?
    I want to use the modem in bridge mode and have the AEBS handle everything as before, as it was perfect.
    At this stage, which a frazzled brain (after messing with everything for several hours), something step-by-step would be great.
    Help! (and thanks)

    I have also recently developed problems with my airport network. I was playing my air tunes when it started freezing so i reset my airport extreme and expresses. When I tried to setup my networks again I en counted problems like airport utility couldn't find the extreme base station or when it did it couldn't read the setting. I eventually managed to create a network then when i tried to connect to the network it either asks for the password (even though its saved in keychain) When I enter the password it keeps saying "connection time out". I then turn airpot off & on and it the sometimes reconnects automatically without requiring a password.
    My internet then will sometime start working again but then drop out completely or take an age to load.
    The network will then sometimes disappear from the network list and I'm unable to see it at all.
    No matter how many time i reset the base station it doesn't make a difference.
    I my broadband modem is also a wireless router and Im experiencing similar problems with that. I took my laptop to work and tried to connect to the network at work and it seems to work ok except it did ask for a password the time out but did it only once.
    I did download a security update recently but im not sure if its that that is causing it
    please help me as well as I'm stuck without my network

  • Restore help needed please.

    I need help. I got a new iPhone today and I went to iTunes, pressed restore, because I didn't know what else to do.
    And now because it was logged in under my boyfriends apple ID my iPhone is my boyfriends iPhone too.
    How do I turn it back to mine!? I need urgent help please!

    Go to Settings > General > Reset > Erase All Contents and Settings. Now this time, select Set Up as New iPhone rather than Restore from Backup.

  • Error in database reading ! help needed please.

    My project involves monitoring of ovens.
    The temperature from the oven are obtained using advantech ADAM module.
    Each material enters the oven and an alert is given to take it out after the desired time inside the oven.
    When i execute this program. an error pops up exactly 1 our after the start of the program.
    Kindly help me.
    I have attached the source code including the DB files and the error screen shot.
    username: 123456
    pass: 123456
    Thank you ina advance.
    Please help figure out the error.
    Regards
    Grugh Mike
    Success is Everything !!
    Solved!
    Go to Solution.
    Attachments:
    New Microsoft Word Document (2).doc ‏151 KB
    source.zip ‏4529 KB

    The biggest problem in your code is architectural. You need to learn about a few things like event-driven programming. As but one example you have an administrative operations VI that would be much smaller and much more efficient if it were built around an event structure and not multiple case statements. Your main application uses sequence structures - which are never necessary. As I recall, the last sequence structure I used in deliverable code was in the spring of '88.
    You also are not handling any of errors - which I suspect might be the source of your problem. It's possible that due to an error (which is going unreported) that a connection is being left open when you think it is being closed. But at this point that is just a guess.
    Fix the structural problems and you'll then be able to troubleshoot your DB problem. Shoot, in the process of fixing the structural issues, you may fix the DB!
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Maybe you are looking for