Wired to Wireless MAC header Cross Reference

Hey guys! I was wondering if you all could help out compiling a list of the radio mac header to ethernet mac header on all of the aironet based cisco APs. We are starting to implement tighter security here and one of those aspects is making sure rogue aps do not end up being connected to our infrastructure. For the soho equipment it has not been too difficult to track but the cisco equipment has been a lot more difficult. Since the ethernet and radio macs are coming from two different pieces of equipment and the fact that there is no existing document has us at a loss in quick scanning. I will go ahead and get this started it would be really great if we can continue building upon it.
this is just from some old 1200s:
Wired Wireless
00:09:E8:* 00:07:50:*
00:0D:29:* 00:0C:CE:*
00:0E:38:* 00:0E:38:*
00:0E:84:* 00:0E:D7:*
00:0E:D7:* 00:0E:D7:*
00:0F:23:* 00:0F:24:*
00:0F:23:* 00:0F:23:*
00:0F:8F:* 00:0F:90:*
00:0F:90:* 00:0F:90:*
00:0F:90:* 00:0F:F7:*
00:12:43:* 00:11:92:*
00:12:80:* 00:13:19:*
00:12:80:* 00:12:80:*
00:12:D9:* 00:13:19:*
00:13:1A:* 00:13:60:*
00:14:6A:* 00:14:6A:*
00:14:A9:* 00:14:A9:*
Here is some of the new 1242s:
Wired Wireless
00:16:C7:* 00:15:C7:*
00:19:30:* 00:1A:30:*
00:19:55:* 00:19:07:*
00:19:AA:* 00:19:A9:*
00:19:E7:* 00:19:A9:*
00:19:E8:* 00:19:A9:*
00:1A:2F:* 00:19:A9:*
00:1A:6C:* 00:1A:30:*
00:1A:6D:* 00:1A:30:*
00:1A:A1:* 00:1A:30:*
00:1A:A2:* 00:1A:30:*
00:1A:E2:* 00:1A:E3:*

AIR-AP1121G-A-K9 eth: PowerPCElvis Ethernet 00.11.5c Rf: 00.11.21
AIR-AP1121G-A-K9 eth: PowerPCElvis Ethernet 00.11.5c Rf: 00.11.5c
AIR-AP1121G-A-K9 eth: PowerPCElvis Ethernet 00.11.bb Rf: 00.11.5c
AIR-AP1121G-A-K9 eth: PowerPCElvis Ethernet 00.12.00 Rf: 00.12.43
AIR-AP1121G-A-K9 eth: PowerPCElvis Ethernet 00.12.01 Rf: 00.12.01
AIR-AP1231G-A-K9 eth: PowerPC405GP Ethernet 00.12.7f Rf: 00.12.7f Rf: 00.12.d9
AIR-AP1232AG-A-K9 eth: PowerPC405GP Ethernet 00.13.c4 Rf: 00.13.c3 Rf: 00.13.7f
AIR-AP1232AG-A-K9 eth: PowerPC405GP Ethernet 00.13.c4 Rf: 00.13.c4 Rf: 00.13.7f
AIR-AP350-IOS-UPGRD eth: PQUICC_FEC 00.40.96 Rf: 00.07.0e
AIR-AP350-IOS-UPGRD eth: PQUICC_FEC 00.40.96 Rf: 00.09.7c
AIR-AP350-IOS-UPGRD eth: PQUICC_FEC 00.40.96 Rf: 00.0a.41
AIR-AP350-IOS-UPGRD eth: PQUICC_FEC 00.40.96 Rf: 00.0a.8a
AIR-AP350-IOS-UPGRD eth: PQUICC_FEC 00.40.96 Rf: 00.0a.b7
AIR-AP350-IOS-UPGRD eth: PQUICC_FEC 00.40.96 Rf: 00.0a.f4
AIR-AP350-IOS-UPGRD eth: PQUICC_FEC 00.40.96 Rf: 00.40.96

Similar Messages

Sharing iTunes between wired and wireless Macs

Hi,
I have a Mac laptop connected wirelessly to an Airport Express -- which is wired to a desktop Mac Mini. I'm trying to share music but cannot. I've done all the proper settings in the iTunes preferences and the same in System Preferences -- I think -- on both computers, but on neither computer is anything showing in the Sources window. It says that there are no users online.
Is there something in the System Preferences box that I'm missing? Should I turn the firewall off (I shouldn't need to, since I've checked the iTunes Sharing box)? Is the main problem here that you can't share music between a wired and wireless computer? (This would be a bit strange to me, but you never know.)
One other thing. I was trying out the network and I can only get access to the wired Mini's Public folder as a Guest, not as a Registered User. Is there something very badly wrong here?
Any suggestions welcome. Thanks.

Thanks for the rapid response. All of those preferences, however, are already set properly (i.e., as you said) on both computers. When I try to go to the Network, I can access the wired desktop Mini's hard drive, but when I try to do it on the mini to get into the laptop's it can't find the afp. It just keeps searching but then says it doesn't exist. Not sure if this network-connectivity problem is relevant or not for this particular issue of iTunes sharing. Grateful for any advice.

Cross-References Broken In RoboHelp 10 Output

We are using FrameMaker 11 to author our documentation. We have some cross-reference links that do not work when the FrameMaker book is imported into RoboHelp. Upon import, the href information is not included in the link in the HTML code. The text looks like a link, however. When the help is generated, the text is not a link. The following is an example of a non-functioning link:
see <a>Link</a>.</p>
Here is an example of a cross-reference that is functioning correctly:
<a href="#XREF_90399_Heading_Text">Link</a>
There are no errors in FrameMaker. The cross-reference is updating correctly in FrameMaker. In addition, when a PDF is made form the same book, the cross-reference works in the PDF.
Troubleshooting steps I have taken:
I have tried going to MIF and back for both the source and target documents.
I have recreated the cross-reference and marker.
I have tried linking to a heading cross-reference marker, as well as a manually create cross-reference marker.
I have renamed the file.
I have renamed the marker.
I have used different cross-reference formats.
I recreated the file by copying all the text to Notepad and pasting the text back into a fresh FrameMaker file.
None of the steps I have attempted have corrected the issue for the cross-reference I focused my troubleshooting on. I hope that someone can point me in the right direction to correct this issue.

I have been trying everything I can think of to move the files around to resolve the issue. 35 characters is very disappointing. Is this for the file and cross reference or the whole file path? I am not sure how you are going to be able to link from one Framemaker file to another, including a cross-reference name (especially when you can use heading for the cross-reference name) with a limitation like this. We also have a large library with many directories. We utilize single sourcing, so some files are in completely other directories from the file that is cross-referencing to it. From what you are telling me, it sounds like we no longer have the ability to use cross-references from one file to another in our library structure. Are you saying that all cross references basically need to be in the same file to allow cross references to work properly in RoboHelp? We moved from a WebWorks solution and we never had any issues with our links.
What I don't understand is the marker is in the destination file in the converted RoboHelp files, but the link is completely missing the <a href="#XREF_name ofmarker"> code in the cross-reference link. When I go in and manually link the cross-reference in RoboHelp, it works. This seems like a bug. I think having a 35 character limit on a filepath, filename, and cross-reference name is not going to work for anyone that has any sort of complex directory structure with multiple authors, sharing content and since it isn't a limitation of HTML, I don't see why this functions this way. Manually linking isn’t a reasonable option for us. We have a publishing system that publishes all of our output. We have hundreds of files that are generated automatically.

I have a Time Capsule as my router. I can connect wirelessly to the network and internet with my MBPr, but my Mac Mini will only connect to the network wired or wirelessly. Airport on it sees the internet as green, but will not connect.

I have the Time Capsule hooked to a wireless modem. It uses a static IP, which is put in and running. The MBPr connects, as well as my iPhone 5, to the internet and network without problem. I can see the Mac Mini, external drive attached to it, and the Time Capsule. The Mac Mini connects to the network wired or wirelessly, but not to the internet. On wireless, using AirPort the Internet shows green, but no connection when I open Safari. The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr. I was hoping someone might have an idea of what was going on. Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.

No, its is connected direct to the providers fiber box.

Slow wired and wireless connections on new Mac Pro

I have a new 6-core Mac Pro with 64GB RAM that I seem to be having major network issues with. When I restart or first switch the machine on it's fine but after a few minutes the network (web browsing) become painfully slow - when I run a speed test it come out at ~2Mbit/s. This is the same whether I connect on a wired or wireless connection. I've tried various connections including a complete bypass of my time capsule to a direct wall connection that should be giving 100Mbit/s. When i run a speed test on my iPhone connected to the time capsule via 5GHz I comfortably get >60MBit/s.
Is there a bug in the latest OS 10.9.4 my MBAir also seems to require a lot of restarting to keep up even basic web browsing???

Your Macs are always looking for a better connection. To that end, they are evaluating every possible way to get to the Internet.
It is very important that you limit those choices to only the ones you actually want to connect to, and indicate that the other are "off the list", literally.
For example, to test your wired network connection, Ethernet must be at the top of the list AND WiFI must be OFF. (Otherwise, your Mac will be checking WiFi to see if it seems to be getting a better connection over WiFi. In the screenshot below, Ethernet is at the top of the list, so it is likely to be used, but since WiFi is still ON, it may be used instead.
To check YOUR WiFi connection (and not your neighbors' connections), you need to BOTH check that the "ask to Join new Networks" box is checked:
and that the Networks you wish to join are shown in the order you wish to join them. All extraneous networks should be removed from this list:

Does Tiger require ownership (and sharing) of wired printers on a wireless LAN? My G4 (Tiger) is also wired to the LAN, and can access all wired printers through the router. Wireless Macs cannot even find the printers.

Does Tiger require ownership (and sharing) of wired printers on a wireless LAN? My G4 (Tiger) and all printers are wired to the LAN, and the G4 can access all printers through the router. Additional wireless Macs (Snow Leopard and Mountain Lion) cannot even find the printers. Yet, if the G4 shares the printers, then ALL computers on the LAN can access them. However, this requires the G4 to remain powered. Is there a workaround that would allow me to shut down the G4 and still use the printers?

Hello BDAqua!
Well, I am halfway there. Following your steps on the Snow Leopard MBP, the newer printer (a Canon MX860 inkjet) appeared automatically under the "default" icon on the ADD printer window. I used the IP icon with the HP Jetdirect-Socket protocol to find and add the older printer, (an HP 4000N). That required running a configuration page from the printer to locate its IP address. I printed to both printers through this laptop with success!
I then followed exactly the same procedure with the Mountain Lion MBP. For both installation attempts, I got an error message window: Unable to verify the printer on your network. "192.168.111" may not exist or is unavailable at this time. Would you still like to create the printer? If I click Continue, it creates the icon and name in the printer list. However when I attempt to print from an app. the next message says, 'Printer is unavailable.'
Why one laptop finds and uses both printers, and the newer laptop does not, just floors me!
Thank you for your ongoing assistance.
Bill

Can I have wired and wireless simultaneously - and connect via another Mac?

Here's my problem: My eMac (Feb 2005 running Leopard 10.5.8) is great except that it drops the ethernet cable internet every 15 minutes or so. "Sleep and wake" and I'm back on the internet for another 10-20 minutes, but this is not a long-term solution.
OK so I say that I will get a D-Link wireless USB adapter for the eMac (it has bluetooth, but not WiFi). Fine, except then the D-Link DIR-635 router that sends the WiFi signal is too far away and too weak. But I have another computer to which I can plug-in the Ethernet CABLE. Can I then connect the eMac via a wireless (airport) sharing? NOTE: At this time the ISP Modem goes to a DIR-635 router (a wired and wireless router) and the cable goes up 2 flights of stairs to the eMac. I'd plan to then plug-in the PBG4-12" to the cable instead of the eMac; and then connect the eMac via wireless sharing if that is possible. (The PBG4 does NOT drop the signal via wired ethernet - it is a problem with the eMac not the cable or router).
BUT then how to print? My MP640 printer is set-up for wired printing only right now. And for a number of reasons, I really want to keep it on wired (not wireless)-- I use this with another computer etc. etc. and wired gives me more selections for printing...
Any comments on this possibility and then I'll reply with comments and/or ideas-- THANKS!
Best regards,
Steve Schulte
Thursday 3 February 2011

If you use two routers then you should have the main one (connected to modem) as the official router. The second one should be configured to extend the existing network (you will need to consult its manual to find out how that's done.) If you try using two routers independently, then they will tend to interfere with each other because both are trying to deliver IP numbers on the network. So if the printer ends up on the secondary router then a machine connected to the main router may not be able to connect to the printer.

Cross reference or hyperlinking not working for InDesign CS5 Book to ePub

I cannot get hyperlinks or cross reference links to work when generating an ePub from InDesign CS5. (7.0.0.355, Mac OS 10.6.2)
Here's how to recreate a simple test demonstrating the issue.
1. Create a new InDesign Book (File -> New -> Book)
2. Create document one (File -> New -> Document)
3. Create a text box and type "Table of Contents"
4. Create document two (File -> New -> Document)
5. Create a text box in it and type "Story One"
6. Create a new paragraph style and assign it to the Story One text
7. Save document 2. I just kept the name Untitled-2.xhtml
8. Back in document 1, add a cross-reference and select document 2, the style you created, and then "Story One". "Story One" should now appear under the previously typed Table of Contents text, and when highlighed, should show it is an active cross reference in the Hyperlinks panel.
9. Save document 1. I just kept the name Untitled-1.xhtml
10. Add both documents to the Book and save the book.
11. From the Book panel, select Export Book to EPUB...
12. Save the epub file and open it in Adobe Digital Editions.
Note that the text "Story One" appears as a hyperlink but when clicked does not switch to the document 2. It does nothing apparent when clicked.
Looking at the XHTML source for the first document, it is immediately evident why. The filename for document 2.thml is missing. It looks like this: <a href="#anchor-anchor">
When it should be : <a href="Untitled-2.xhtml#anchor-anchor">
The same thing works if you create a hyperlink instead of a cross reference.
I note then when I use the option to go to the destinate reference in the Cross Link (hyperlink) panel, it does switch to the second InDesign docuemtn. So the cross reference is functioning (in InDesign). But the link is broken in the ePub for the above mentioned reason.
Bug? Something I'm overlooking?
Entire source of Untitled-1.xhtml:
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Untitled-1.xhtml</title>
<link href="template.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="untitled-1">
<div class="generated-style">
<p class="basic-paragraph" xml:lang='en-us'><span class="no-style-override">Table of Contents</span></p>
<p class="basic-paragraph" xml:lang='en-us'><span class="no-style-override"><a href="#anchor-anchor">‚Äústory one‚Äù</a></span></p>
</div>
</div>
</body>
</html>

As far as I can tell, it has NOT yet been fixed in CS5.5. I'm having the same problem. I have about 90 hyperlinks to fix.
And the explanation that Teus Dejong gives indicates it's not going to be that helpful: "we have found that only the links in documents split by the CS5 exporter will be fixed. For books the script does only work for references to earlier documents in the book, not for forward references. This means in practice that for most books the script will not repair the links and should be seen as a means to add the year only. At the moment I see no way to repair this, because the book epub output of InDesign does not contain sufficient information to repair links referencing forward to others documents in a book."
It's pretty discouraging.

Why is a single Cross Reference text turning red after doing an Update?

After updating a large book in FrameMaker10, the same cross-reference made in a couple of chapters is turning to red text. It is set as Heading 2. I tried to deleted the heading and re-typing it. I tried to change the style to Body and back to Heading 2 but all references to it are turning to red text after I update the book. Any idea what is wrong and how do I fix it? I am using unstructured version. See image.

Apply a Character Format of Default ¶ Font. Then re-apply the desired Paragraph Format. If the red goes away, it was either a Character Format that had been applied or a local color override. If the red is still there ...
Look at the Special > Cross-Reference > Format > Definition itself. Look for any <character-format-name> and see if any of those have a red Color defined in their Format > Character > Designer. If so, remove that building block from the definition [Change] [Done] [Replace].

Cross-Reference to Multi-Level Paragraph

Hi,
Is it possible to create a cross-reference that does something like this:
'1.B.(1)(a)2) on page XXX' from the following:
I have created a cross-reference format as follows:
<$paranum[1. Heading]><$paranum[A. Text/Heading]><$paranum[(1) Text/Heading]><$paranum[(a) Text/Heading]><$paranum[1) Text/Heading]><$paranum[a) Text/Heading]> on page\ <$pagenum>
This works if I cross-reference from 'text10' to 'text9', which returns - '1.B.(2)(b)2)a) on page 6001',
and 'text10' to 'text2' returns '1.B. on page 6001'.
It fails when I go from 'text10' to 'text13' giving '1.C.(4)(b)2)b) on page 6001' instead of just '1.C. on page 6001'.
Any help on what I'm doing wrong?

In support of Niels' response, I'd written almost the same thing, but 1.__AG__, entered a more objective response (well put, AG!) before I sent my impressions.
I agree with Niels that
The reader might appreciate a more direct numbering system (the milspec standard of 1.2.2.2.2.1 would be the equivalent section to your 1B2b2a example
The tags used would be easier to navigate if they used a 1List 2List 3List convention, and that the punctuation used in numbering is a bit confounding at first glance
The xref format is straightforward if all levels are displayed at that point
Sadly, and as always, we can help with everything but the politics of your situation!
I do like Niels' suggestion of using the Running H/F to display the current section, if you're forced to use the numbering scheme as-is!
Best of luck navigating this with the powers that be.
-Matt

Cross Reference an Object??

How do I cross reference an object using Indesign CS4?
I've got a PDF that I've dropped into a frame, which I applied an Object Style. Now I need to create a cross references in the document, that point to the PDF (a chart). I've got to do this with several PDF's.
When I go to create a cross reference, I can only apply it a Paragraph Style or a Text Anchor, I don't get an Object Style to choose from.
I could put some text in behind the chart, and arrage the chart to the front, but i'd rather create a cross reference to the Object itself.
What do i do?

sammy003 wrote:
How do I cross reference an object using Indesign CS4?
I've got a PDF that I've dropped into a frame, which I applied an Object Style. Now I need to create a cross references in the document, that point to the PDF (a chart). I've got to do this with several PDF's.
When I go to create a cross reference, I can only apply it a Paragraph Style or a Text Anchor, I don't get an Object Style to choose from.
I could put some text in behind the chart, and arrage the chart to the front, but i'd rather create a cross reference to the Object itself.
What do i do?
Cross-references only point to text - either a text anchor or a paragraph - not to objects.
If your placed PDF is in an anchored frame, you can point the cross-reference to the paragraph in which the frame is anchored.
If your placed PDF is not in an anchored frame, you can do what you suggest above, or you have these other options:
* place the PDF into a text frame
* create a text frame and group it with the PDF; point the cross-reference to the paragraph in the text frame, or insert a text anchor in the text and point the cross-reference to it.
* you can paste the grouped PDF and text frame object into a text frame to make it an anchored frame.
The idea of a cross-reference is usually to point to a caption or heading. You can't point to the text in a placed PDF because it's really a graphic. You'll probably want a caption to identify the chart. The caption is the text you cross-reference to. The caption can be in the paragraph that holds the anchor, in a text frame grouped with the graphic, in a paragraph above or below the graphic, or in an anchored frame that's positioned near the graphic.
If your layout will not reflow, you probably don't need an anchored frame, but if the layout will reflow, you'll want to use the ability of an anchored to move with the text.
Read about cross-references and anchored frames in Help. If your caption will be numbered, such as "Figure 3," also read about numbered lists and numbering properties of paragraph styles.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Cross Reference displays wrong Chapter

I have several FrameMaker files that will eventually be combined into one book. In some chapters there are references to outside chapters. At some point another person that was using these files had to switch the Chapter title; for example Chapter 7 became Chapter 6. Now when I open up, lets say Chapter 5, and I set up a cross reference to chapter 6 I got throug the following steps:
I make sure both files are open in FrameMaker, I put my cursor in the spot I want to make a hyperlink > Right click > Cross Reference
When the window Pops up I make the following selections:
Document: Chpater 6
Source Type: Paragraphs
Paragraph type: Heading1
Paragraphs: Page 7
I select the exact paragraph I want referenced
Format: CH XX, #
When I hit replace I am expecting the text on the screen to say something like "CH06, 3-1 Title" but instead it says "CH07, 3-1 Title"
The link goes to the location I want, it goes right to Chapter 6 but the visible text says Chapter 7 which is wrong. I assume this is happening because someone switched those two chapters.
Does anyone know how to edit what the text says or what I need to change in the switched chapters to make it work correctly. Something else I noticed is that the Document option in the cross reference is saying Chapter 6 with the old title, not the latest up to date title.

I think I may be having the same issue. I'm using Technical Communications version 3. I have a huge FM book composed of many books - over 3,000 pages if it were printed. I'm linking to the FM file in RoboHelp (RH). No broken xrefs in FM, but when I go to RH, there are odd xrefs or missing ones. I keep updating both FM and RH without any success. So, I generated a list of cross-reference markers in FM.
This is what I think is causing this. Even though you're supposed to be able to link to the FM file and if all is ok with the FM book (no errors, no broken xrefs), everything should chug along in RH. But, NO, it doesn't. When I put in cross-references in FM, I do them by the paragraph. But then you can also see the actual marker text, which doesn't always agree with the heading text. This is what RH uses. So, if you're having these issues, check the marker text to make sure it matches the paragraph text.
Below is an example where I had updated the heading, but the marker didn't match. FM didn't care and didn't report a broken cross-reference. RH just displayed the xref heading but it wasn't a link. Very frustrating. I'm looking for a way to get the xref markers to match the paragraph headings.
This is the heading: EContent in the PAC Patron Account
and this is the marker text: 28254:Heading 3: 3M eBooks in the PAC Patron Account - Items Out 768
BTW - I saw some snarky answers - just insecure people who want to show how much they know technically. For me, I just want the *******' tool to work! If I wanted to know all the sausage-making, I'd have been a programmer. I actually like to write and fiddling with RH is just tedious! In my experience, programmers are a dime a dozen; good writers are rare.
Make this a snark-free zone and help novices. Lord knows, Adobe's own documentation just doesn't get it. They tell you what something is but not how to do it! Oh, and the UX in RH is so cluttered and confusing! Do you use a pod or a menu item, what is important enough to get a pod? Why are there all these different ways to set up a project? It's like it was designed by hyped-up, overly-caffeinated people with really bad OCD. It's not about the tool, it's about the writers trying to get their jobs done!

Cross reference markers are deleted for content in text insets

Cross reference markers are deleted for content text insets. I currently have a chapter that is built from several Import by Reference files. I added an introductory paragraph with cross reference links to heading 2 titles in these text insets. Everything works and saves normally, although the cross reference markers disappear from the chapter when files are checked out a few days later. An extra Heading 2 is also added to the end of the document.
Steps to reproduce:
1. Create a chapter composed of several text insets.
2. Create a list of cross references to headings in these text insets at the beginning of the chapter.
3. Check in/check out the files from a source control product.
What went wrong?:
The cross reference markers are gone, resulting in broken cross references. An empty Heading 2 is also added to the end of the document following the final text inset
What should have happened?:
The markers should remain and the heading 2 tag should not be applied to the document.
Product version:
Product: FrameMaker
Version: 7.2
Platform information:Windows XP
Hardware: Dell Latitude D620
OS Version: Windows XP Professional Version 2002, Service Pack 3.
RAM: 1GB

Thanks for the information, Van. We did try several techniques including adding the insertion point immediately after the text inset before the normal paragraph tag, but none seemed to consistently work. I will investigate this scenario futher, though, in light of your comments.
We have managed to determine a workaround for this issue by avoiding a string of text insets. For some reason, using multiple text insets without separating them with normal text causes most of the problems after we add the files to our source control system. The situaton is not ideal, but it does work for the time being anyway.
Steve

Cross reference + GREP + excluding text

I would like to know if anyone has a solution to the following problem.
I have a paragraph style which I use to label tables within my document. In the paragraph style I have set up numbering (under Bullets and Numbering) so that each heading appears as "Table 1.1 School Children in HK" or "Table 1.2 School Children in China" the code I have entered in the 'number' field of the paragraph style appears below:
Table ^H.^#^/
I have inserted the word 'Table' prior to the rest of the code so that the label is correct.
When I create cross references I select 'Cross Reference Format' to be 'paragraph number' the problem is, however, that the word 'Table' is picked up as part of the 'paragraph number' because of the settings in the Paragraph Style. The end result looking like this:
The result is fine if you are cross referencing a single table per sentence, however, if you are dealing with multiple tables in plural this is a problem. What I would like to achieve is this:
Does anyone know if there is a way to achieve this by editing the 'Cross Reference Format' so that the word 'Table' disappears when the cross reference is generated? Perhaps with GREP?
I would really appreciate your help.

Hi Tom,
Im following standard English conventions (UK, if you will) and the format at the moment is a wee bit clunky when you have to write something like 'Table 7.1, Table 7.2, Table 7.3, Table 7.4 and Table 7.5.....' as will be the case later in the document. The other arrangment of 'Tables 7.1, 7.2, 7.3, 7.4 and 7.5.....' is much shorter and easier to read - brevity is essential in this document because of limited word count.

How do I cross reference to text (as in a reference citation)

I am using Frame 7.0. I want to create a cross reference to text (not a heading). For example, I have a citation such as (Smith, 1980) and I want to link that to the following:
H. Smith, 1980 "Have a good day" Martin Press, pgs. 46
I only want Smith, 1980 to appear as the link, not the entire description.
Thanks.

Another option is storing the custom text version in a paragraph autonumber that is entirely hidden, and use a cross-reference format that retrieves that autonumber only. The custom "autonumber" will be paragraph override (or otherwise you will have to define a unique paragraph tag for each source citation).
Shlomo Perets
MicroType, http://www.microtype.com
FrameMaker/TCS training & consulting * FM-to-Acrobat TimeSavers/Assistants
"Improve your FrameMaker Skills" web-based training sessions

Wired to Wireless MAC header Cross Reference

Similar Messages

Maybe you are looking for