Wired USB mouse freezing intermittently, becoming more frequent

I have an old Mac running Snow Leopard. I have been having an intermittent problem with the USB wired mouse freezing. However, the frequency of occurance is increasing to the point where it has moved beyond occasional annoyance to multiple times a day problem. The keyboard still works but it requires a Crash reboot into safe mode to get the mouse working again. Changing to a different brand mouse doesn't help. Repairing disk permissions doesn't help. Turning off the energy savers doesn't help. Doesn't seem to matter whether bootcamp is running or not. Doesn't seem to matter whether VMWare is running or not. Occurs with more frequency when camera is hooked up to the USB, but only increases the occurance rate. It still freezes when the camera isn't hooked up.

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
Maybe this will help.
https://discussions.apple.com/message/20681705#20681705

Similar Messages

USB mouse freezes after wake from sleep.

Since the 10.8.2 update my Logitech USB mouse freezes after waking up the computer from sleep or when it goes into energy save from non use. This also happens to my brand new MBPR. I tries repair permissions and reset the smc. Any suggestions?

I get a frozen mouse (Microsoft Intellimouse Optical) on my 2012 Mac Mini running Mavericks (it did it with Mountain Lion also) when waking from sleep about 75% of the time which works again if I unplug/replug it (light is on and mouse buttons work when it's frozen, but the pointer won't move). It does this whether I use a built-in USB3 port, a USB2 hub and now also with my new USB3 hub.
However, my 2008 Macbook Pro also has an Intellimouse connected to it when docked and it NEVER freezes when waking from sleep whether using the built-in USB2 port or a Gmyle USB3 card port. Either way, the mouse wakes fine and it's the SAME MODEL MOUSE and SAME OSX verison. I have no idea why the inconsistency. It ***** because "Wake on Network Activity" FINALLY works right here in Mavericks with XBMC on my Mac Mini so there's a perfect opportunity to save some electricity. I got excited when it woke up two times in a row with 10.9.1 and set up my sleep controls only to find it wouldn't go to sleep with the Energy Savings menu because I have an external USB3.0 3TB media drive connected (at all times). I finally found out (through more patient testing) that once the drive spun down (possibly on its own power saving timer as I'm not sure the "Shut down hard drives when possible" setting works in Mavericks; it was messed up in Mountain Lion in 10.8.4 and even though 10.8.5 fixed it, I'm not sure Mavericks is using the same code. It doesn't seem to shut down any faster with or without the setting on and shuts off several minutes after the computer attempts to go to sleep (on a 1 minute test setting; I think WD defaults to 10 minutes in firmware).
Anyway, once that was resolved and I saw it would go to sleep eventually once the drive spun down (it will sleep instantly if I select SLEEP from the Apple menu which I find odd if it's such a big deal that it's connected....), I thought OH BOY! I'm all set. Then I woke it from that sleep and found my mouse was frozen again..... :-( What a PITA to unplug/plug the mouse every time it wakes from sleep. It's not worth it. I'll just have to pay the extra few bucks in electricity each month I could have saved to avoid such a freaking nightmare hassle. Why on God's Green Earth, Apple CANNOT or WILL NOT fix their darn energy savings features is just beyond me. Instead of spending all their time making horrible horrible ugly icon/GUI updates to iOS and making it slower and slower and slower, why don't they actually fix some darn bugs in OSX for once in their lives.... I'm starting to think I should give Windows another chance I'm so annoyed right now. But then I think about having to run a malware program and have that program update and Windows software/security updates 3x a day and I think I can just deal with the Mini not sleeping.....
I'd like to know why Apple couldn't figure out those of us with multiple monitors would want a dock on BOTH monitors all the time either (first side-mount docks wouldn't migrate and now in 10.9.1, bottom-mounted docks won't migrate here either, leaving a dock on one monitor all the time and if that's the monitor that is showing full-screen video, you lost your dock completely while the video is playing. They finally figured out after a full decade that having a menu bar on both screens would be a good idea, but it just didn't occur to them that the same is true of the dock. How much are they paying these guys? Too much apparently (or is it too little to attract talented thinkers? Nah, it couldn't be since we give them feedback and they just ignore it).

MPro, 10.7.5 mouse/keyboard intermittently become unresponsive

I am running OS 10.7.5 on a 2009 Mac Pro and recently the mouse started to intermittently become unresponsive. I usually can fix this by conecting the mouse to a different usb port but last time it happened this didn't work and I also lost the keyboard. I switched both mouse and keyboard and problem persisted, even when moving to different usb ports. After several hard reboots the mouse and keyboard came back and has been working since. I know the second mouse and keyboard are good and I am able to ptint from all the usb ports on the Mac Pro so I son't think it's a hardware problem. Could this be some kind of driver conflict? There are two canon usb printer drivers installed and two network printers )Lexmark and Brother). I have been running software update regularly. No other problems and I do regular disk maintenance (Diskwarrior). There are two SSDs and two hard drives installed, 32 GB ram. No problems with any hardware that I know of. Could a memory error? Thanks in advance for any ideas as to cause or insights into tracking it down appreciated.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

My wireless usb mouse freezes or gets stuck on right click/drag

My wireless usb mouse has been getting stuck on right click and/or drag, or the right click just freezes and becomes unusable. Sometimes, my mouse jumps erratically and opens anything that the arrow crosses. I can't use my trackpad because it's broken, but the trackpad itself isn't causing any problems. My system preferences for mouse and trackpad are all fine. My bluetooth is turned off in accordance with the recommendations of people having similar problems. My anti-virus programs don't detect a macro virus or any other problems. Only restarting in safe mode temporarily solves the problem. Does anybody know how to fix this?
Some people have suggested this may be caused by a swollen battery. However, my laptop is a somewhat more recent model and I don't have a portable/removable battery, so I can't solve the problem by taking it out and back in as some people have. Other suggestions?
Thanks!

Update: I've also tried repairing permissions and that doesn't help.
I've experimented with other mouses just to see if there'd be a difference, but the problem is definitely with the computer. All plug-in or wireless mouses have the same results. Right click still won't work.

10.6.7 usb mouse freezes

Greetings
I have a USB mouse ive been using since optical mice were invented.
I upgraded to 10.6.7 and the mouse works fine, then it stops. i pick it up, and it works again, it's like it goes to sleep. no light no power. then it works.
I have multiple monitors, and the usb mouse is plugged into the back of one of the monitors. I really see it stop when i switch monitors or try to scroll on a web page. a sudden click then it freezes and starts again. As long as Im in one window, it seems fine, but if i go to another application or click somewhere else it jumps. Which makes me think it's not hardware and it had something to do with a recent update.
here is some relevant info;
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x3a3a
PCI Revision ID: 0x0000
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Hub:
Product ID: 0x9126
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.00
Speed: Up to 480 Mb/sec
Location ID: 0xfd300000
Current Available (mA): 500
Current Required (mA): 100
Microsoft 3-Button Mouse with IntelliEye(TM):
Product ID: 0x0040
Vendor ID: 0x045e (Microsoft Corporation)
Version: 3.00
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Location ID: 0xfd330000
Current Available (mA): 500
Current Required (mA): 100
Keyboard Hub:
Product ID: 0x1006
Vendor ID: 0x05ac (Apple Inc.)
Version: 96.15
Serial Number: 000000000000
Speed: Up to 480 Mb/sec
Manufacturer: Apple, Inc.
Location ID: 0xfd310000
Current Available (mA): 500
Current Required (mA): 300
Apple Keyboard:
Product ID: 0x0220
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.71
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple, Inc
Location ID: 0xfd312000
Current Available (mA): 100
Current Required (mA): 20
Display Audio:
Product ID: 0x1105
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.11
Serial Number: 2C375C02
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd340000
Current Available (mA): 500
Current Required (mA): 2
Display iSight:
Product ID: 0x8508
Vendor ID: 0x05ac (Apple Inc.)
Version: 2.61
Serial Number: 8JA992E65BRZ3A00
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd350000
Current Available (mA): 500
Current Required (mA): 500
Apple LED Cinema Display:
Product ID: 0x9226
Vendor ID: 0x05ac (Apple Inc.)
Version: 2.93
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd360000
Current Available (mA): 500
Current Required (mA): 2
Hub:
Product ID: 0x911f
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.01
Speed: Up to 480 Mb/sec
Location ID: 0xfd100000
Current Available (mA): 500
Current Required (mA): 100
Apple Cinema HD Display:
Product ID: 0x921e
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.35
Speed: Up to 1.5 Mb/sec
Location ID: 0xfd130000
Current Available (mA): 500
Current Required (mA): 2

greetings
I have cured my illness but I had to amputate the leg.
I have 4 monitors each has their own USB. My newest monitor has a high Speed USB bus. i disconnected the older models and kept the High speed usb bus with just keyboard and mouse. The mouse is zippy and fast again.
I realized something was failing when i plugged the mouse into an older display, when the jitter started the mouse totally failed and would not come back. little blue tooth mouse came in handy.
I'll run some more test.
-j

USB mouse fails intermittently

My USB mouse (on 17"G4 PowerBook 1.67) fails intermittently. It will just freeze. If I unplug the mouse and replug, it will start working again. Both ports behave the same way, and I've tried two different mice. Same result.
I've done the Power Module Reset for this machine (Unplug power; remove battery; press/hold "start"). As promised, the clock needed resetting, but it didn't fix the mouse/USB problem.
Problem occurs unpredictably; sometimes will go a day or two between failures; other times only a few minutes.
Any clues?

I posted this in the wrong forum (15" aluminum) but I saw your post, it may be the same problem. I have a 15" PB 1ghz/2gb ram, 10.4.9. USB mice do not work, or only VERY erratically. I have tested several mice, and some work not at all, just blink a couple times, and some work when I jiggle the wire just right, but only briefly.
This made me think it was a contact problem, but other devices work fine with the USB ports; keyboard, wireless dongle, etc. I also tested the mice on other Macs and they work fine.

Endless loop on iMac after OS update, wont recognise wired USB mouse

I just installed an update on my 2010 iMac, running 10.7.5 and it completed successfully, but now I am stuck in an endless loop on startup. The dialog that shows up over the startup screen (user icons showing up correctly behind it) is from the Bluetooth Setup Assistant, and is titled "Bluetooth Mouse or Trackpad Setup". Its telling me there's no wireless mouse or trackpad connected, which is absolutely true. I prefer wired mice and don't use a trackpad with my iMac. There is a Logitech USB mouse attached that I've been using for a long time, it worked fine immediately before the update. It was plugged into my Apple wired keyboard, but I've also rebooted with it plugged into the Mac directly thru a USB port on the back. Same thing both ways.
Its now looping endlessly, saying "Attempting to connect with mouse #1 (hex code follows in parentheses)", then it says "No wireless mice or trackpads have been found. Make sure your wireless mouse is discoverable", then it goes back to the attempting to connect, and so on...
Anybody got a way out of this??

Wow. Would never have believed that was possible (that's why I didnt consider it...). It appears that indeed the software update itself fried the mouse. The same mouse whose last click was to click the "Restart" button on the software update dialog. A different iMac won't recognise it either, and the mouse from that Mac breaks the endless loop from the Bluetooth Setup Assistant. Looks like I need to find a new mouse, I wonder if I can still find one with a wire...
Any thoughts on whether this was pure blind coincidental failure, or is there some way a restart itself could damage a mouse somehow??? Hard to imagine the software did it per se, so perhaps it was one final reboot that broke the camel's mouse's back?
Thanks, Linc.

USB mouse freezes when external HD is connected

Not sure who to contact on this one. I purchased some music software from East/West and it came on a Western Digital hard drive. Every time I connect the hard drive, my mouse freezes and I can't open the drive. Any ideas??? Sounds like a compatibility issue but the HD is supposed to be for Mac.

- Have you tried another cable for HD?
- If you open Finder. unplug the mouse and then plug the HD in does the HD appear in Finder (it has to be formatted for a Mac to appear)
- Have you tried on anther computer? Either Mac or PC.
- Do other devices like USB thrumb drive work on the Mini?

USB mouse freezes

My USB mouse keeps on freezing. Replugging usualy helps.
The following is from dmesg.
[ 1346.754811] usb 1-3: USB disconnect, device number 9
[ 1347.079690] usb 1-3: new low-speed USB device number 10 using xhci_hcd
[ 1347.097559] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1347.100026] input: MOON AND as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input27
[ 1347.100317] hid-generic 0003:13EE:0001.0006: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:14.0-3/input0
[ 1361.545866] usb 1-3: USB disconnect, device number 10
[ 1362.584076] usb 1-3: new low-speed USB device number 11 using xhci_hcd
[ 1362.601087] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1362.603502] input: MOON AND as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input28
[ 1362.603614] hid-generic 0003:13EE:0001.0007: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:14.0-3/input0
[ 1952.472524] usb 1-3: USB disconnect, device number 11
[ 1953.552440] usb 1-3: new low-speed USB device number 12 using xhci_hcd
[ 1953.570224] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1953.572802] input: MOON AND as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input29
[ 1953.573044] hid-generic 0003:13EE:0001.0008: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:14.0-3/input0
I also get
usb 1-3: device not accepting address 3, error -71
at boot.
And the following is lsusb.
[sameer@Sameer ~]$ lsusb
Bus 004 Device 003: ID 8087:07da Intel Corp.
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 0461:4e1d Primax Electronics, Ltd
Bus 003 Device 003: ID 138a:003d Validity Sensors, Inc. VFS491
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0bc2:5031 Seagate RSS LLC FreeAgent GoFlex USB 3.0
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 03f0:5607 Hewlett-Packard
Bus 001 Device 006: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 012: ID 13ee:0001 MosArt
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MosArt is the mouse.
Last edited by sam34567 (2014-04-10 14:27:45)

[sameer@Sameer ~]$ sudo cat /sys/kernel/debug/usb/devices
[sudo] password for sameer:
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev= 3.14
S: Manufacturer=Linux 3.14.0-4-ARCH xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=0bc2 ProdID=5031 Rev= 1.00
S: Manufacturer=Seagate
S: Product=FreeAgent GoFlex
S: SerialNumber=NA05ND9Y
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=144mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.14
S: Manufacturer=Linux 3.14.0-4-ARCH xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 18 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=13ee ProdID=0001 Rev= 0.10
S: Manufacturer=MOON
S: Product=AND
S: SerialNumber=@ɌAB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 5 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0608 Rev=77.64
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=03 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 6 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=1c4f ProdID=0002 Rev= 1.10
S: Manufacturer=USB
S: Product=USB Keykoard
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 98mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=82(I) Atr=03(Int.) MxPS= 3 Ivl=10ms
T: Bus=03 Lev=02 Prnt=05 Port=03 Cnt=02 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=5607 Rev=11.00
S: Manufacturer=HP
S: Product=v210w
S: SerialNumber=AA00000000005595
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.14
S: Manufacturer=Linux 3.14.0-4-ARCH ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=07da Rev=78.69
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.14
S: Manufacturer=Linux 3.14.0-4-ARCH ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1a.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=11 Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=138a ProdID=003d Rev= 1.04
S: SerialNumber=00a0dadbed8d
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=4ms
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0461 ProdID=4e1d Rev=21.07
S: Manufacturer=Primax Electronics Ltd.
S: Product=HP HD Webcam [Fixed]
S: SerialNumber=PMX02
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=81(I) Atr=05(Isoc) MxPS= 128 Ivl=125us
I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=81(I) Atr=05(Isoc) MxPS= 256 Ivl=125us
I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=81(I) Atr=05(Isoc) MxPS= 800 Ivl=125us
I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=81(I) Atr=05(Isoc) MxPS=1600 Ivl=125us
I: If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=81(I) Atr=05(Isoc) MxPS=2400 Ivl=125us
I: If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us

Why does my keyboard and mouse freeze intermittently after updating to 10.8.2?

After updating to 10.8.2 on my early 2011 Macbook Pro, whenever I pause for more than a few seconds using either the keyboard or the mouse, the pointer freezes. It takes a few seconds of dragging my finger across the keypad or hitting a number of keys before it begins to respond again.
It doesn't appear that any background process is frozen or that the whole system is frozen because video still plays through without stuttering, and downloads continue updating the progress bar as the freeze occurs.
The same thing has happened since my wife updated her Macbook Air. Very frustrating.
Suggestions on a workaround or solution?
Thanks.

Have subsequently tried doing a re-install with the combo updater, repaired permissions, reset SMC and PRAM. No luck. When booting into safe mode, works fine but cursor is 'jittery' and the screen is erratic (like an old tv with rabbit ears antenna.)
Any thoughts or help would be significantly appreciated.

USB Mouse freezes as GNOME starts

Hello,
I have just bought a new mouse to replace my old Wireless USB Logitech mouse which was perfectly supported by my system but I have a problem with my new one, a Roccat Kova (USB and driverless).
With GDM, my mouse works. Then I type my password and log in. GNOME is starting and my mouse is still working. But at the time the menu and task bars appear (GNOME is loaded), the cursor isn't movable anymore and others buttons don't work as well.
My mouse, which is driverless, should for example change LED colors when I press simultaneously two of its buttons. It doesn't in this situation. It is a complete freeze.
However, my USB keyboard still works and I can open up a console. Then I use a small script I've found on a blog (initially designed to make the MP3 player Sansa Fuze work with Linux) :
sudo rmmod ehci-hcd
sleep 1s
sudo modprobe ehci-hcd
Then every connected via USB is stopped and 10 seconds later, everything works, even my mouse.
That's it!
Here is an Xorg log : http://pastebin.com/3byrHv79
and the mouse section in /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "usb"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Another detail : Once the script has rebooted USB support, you have to scroll with the wheel of the mouse to reactivate it.

USB keyboard freezes intermittently

Just got a new TS200v with Windows 2008 Foundation R2. Only has USB ports, therefore using USB peripherals. For some reason once in a while (quite often, actually) the keyboard (Microsoft Comfort 2000) wouldn't respond when trying to log on. So I have to reinsert the plug to "wake" it up. Mouse (old Logitech) always works, though.
Any ideas? Thanks.

RoadEye wrote:
Having searched these forums and others for a week or so I am now posting a question.
After "UpGrading" to Leopard I am now experiencing intermittent mouse lock-ups.
I prefer using an outboard mouse over the trackpad most of the time. This issue occurs often enough to be annoying but seems to correct itself. Unplugging and replugging the mouse also works. This does not occur when booted into boot camp.
I am pretty sure it is a USB issue since I have the same issue with multiple mice.
FYI Universal Access Mousekeys is Off
Firmware updates that would apply have been applied
This was never an Issue with Tiger
Welcome to the Apple boards:
Leopard enforces the USB power limits so if your mouse draws too much current from the USB port you will have problems. Some have used powered hubs to solve this issue.
As an aside, you do not boot into BootCamp. BootCamp is merely a tool to install Winders. You boot into Winders. Once you use BootCamp to partition your drive, it's no longer needed or used.
Winders probably does not enforce the USB current limits, so the mouse may work, but you should be aware that you may still be overloading the USB driver.

Kernel shutdown becoming more frequent (MBP, Yosemite)

Hi, I am currently running a Mid-2012 MBP with version 10.10.2 (14C109) of Yosemite.
Since mid-2014 the laptop has been 'shutting down due to a problem', it was a regular occurrence at first but became less frequent.
I searched through the discussions and several blogs finding different methods to try combat this issue.
I have tried
-Reseting NVRAM/PRAM
-Uninstalling suspected apps
-Cleaning caches
-Verifying disks etc.
I thought the basis of the fault was mdworker (spotlight) from the CPU readings in the Activity Monitor but then Google Chrome helper and other apps started using up higher CPU (I believe google chrome helper is a different problem anyway)
Eventually I gave up trying to fix it because I had planned on replacing the HDD with a new Crucial M550 SSD. I swapped these out at Christmas and placed the HDD in place of the optical drive. Everything booted fine and the mac was back to normal and a lot faster. Three weeks in a kernel panic occurred again and I have been trying to get to the root of it since. Then early last week the whole system crashed and I had to start fresh. I reinstalled the OS with a version on the SSD and the HDD as backup. I re-installed the apps I need (After Effects & Premiere Pro) and got back to work. This morning it has crashed consistently everytime I start using Premiere Pro, even with no other apps open. I dont know if I need Trim with the SSD, if its spotlight thats causing it, maybe an unnecessary app.I really need help with this because I have to meet deadlines. Any feedback would be greatly appreciated.
I have logged all reports to apple but here is the latest one from today.
Anonymous UUID: 4D6876B9-C6A7-089C-7A39-128469A160A0
Sat Feb 14 14:05:45 2015
*** Panic Report ***
panic(cpu 0 caller 0xffffff800361a46e): Kernel trap at 0xffffff8003ad5466, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000000b4, CR3: 0x0000000006431000, CR4: 0x00000000001626e0
RAX: 0x0000000000000080, RBX: 0x0000000000000000, RCX: 0xffffff7f8426c698, RDX: 0x0000000000000000
RSP: 0xffffff809bd0bf00, RBP: 0xffffff809bd0bf40, RSI: 0x000000004a561f92, RDI: 0xffffff8010ce5f00
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000551b8d7e2, R11: 0x00000005512089ee
R12: 0x0000000000000003, R13: 0xffffff8010ce5f00, R14: 0xffffff800debc280, R15: 0x0000000000000000
RFL: 0x0000000000010202, RIP: 0xffffff8003ad5466, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00000000000000b4, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff809bd0bbb0 : 0xffffff800352fe41
0xffffff809bd0bc30 : 0xffffff800361a46e
0xffffff809bd0bdf0 : 0xffffff8003636683
0xffffff809bd0be10 : 0xffffff8003ad5466
0xffffff809bd0bf40 : 0xffffff8003ad34ad
0xffffff809bd0bf80 : 0xffffff8003ad35a6
0xffffff809bd0bfb0 : 0xffffff8003614dd7
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14C109
Kernel version:
Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
Kernel slide: 0x0000000003200000
Kernel text base: 0xffffff8003400000
__HIB text base: 0xffffff8003300000
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 22836072434
last loaded kext at 8023790042: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f853b4000, size 32768)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.ApplePlatformEnabler 2.1.7d1
com.apple.driver.AGPM 100.15.5
com.apple.driver.X86PlatformShim 1.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDAHardwareConfigDriver 269.25
com.apple.driver.AppleMikeyDriver 269.25
com.apple.iokit.IOBluetoothUSBDFU 4.3.2f6
com.apple.driver.AppleMuxControl 3.8.6
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleHDA 269.25
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleBacklight 170.5.0
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.AppleIntelHD4000Graphics 10.0.2
com.apple.driver.AppleIntelFramebufferCapri 10.0.2
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 327.5
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.CoreStorageFsck 471.10.6
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AirPort.Brcm4360 910.26.12
com.apple.driver.AppleUSBXHCI 710.4.11
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.AppleGraphicsControl 3.8.6
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOSurface 97
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOAcceleratorFamily2 156.6
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleThunderboltEDMSink 4.0.2
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.CoreStorage 471.10.6
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 710.55
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
System Profile:
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.159.13.12)
Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Serial ATA Device: Crucial_CT256M550SSD1, 256.06 GB
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f44
Network Service: Wi-Fi, AirPort, en1
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In

Hello davidrbu,
Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Random internet loss is becoming more frequent but...

Hi all, had infinity for about a year now, had the odd loss of connection where everything in the house losses connection, iphones iPads nexus laptops pc's wired and wireless. But all three blue lights are on an the hub and devices are showing as connected via wireless.
Only way to get it back is kill the power and wait 15 mins.
Now its 2-3 times as day, out if the blue everything losses internet.
Any thoughts?

No. If you had not changed anything on the Homehub from when it was first installed everything should have reconnected without any intervention by you. - the equipment is the same now as the day it was installed.
The white Openreach modem should not have needed to be restarted, why did you do that? - as i said the hub was reset via the reset button (20 seconds +), it caused everything in the house to disconnect for over 30 mins, most would not reconnect at all, you say i should not need to do that but then i should not have needed to forget the network and re-enter my network key either?
Did you hold the pin in for 20 seconds? - yes
Is everything working now? - at the moment yes, but the wireless pc and ipad have lost internet connection but not wireless connection once in the last hour.

Keep getting crashes becoming more frequent here's details ID: b3006511-732c-4169-999e-d7bf62110121 Signature: F_1339296399__________________

freqent crashes any help would be greatly appreciated

That is a problem with the [[Flash]] plugin.
See:
* http://kb.mozillazine.org/Firefox_crashes
* http://kb.mozillazine.org/Flash
* http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
You can try to disable all other plugins except Flash and also disable all extensions to test if that helps.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

Wired USB mouse freezing intermittently, becoming more frequent

Similar Messages

Maybe you are looking for