Wired vs. Wireless network visability to shared music on a NAS

I have upgraded to 10.2.1.1 iTunes, I am running a wired network in my home that also has a WAP connected for my wireless devices.  The issue is, when connected to the wireless I can see my shared music that resides on my NAS in iTunes.  If I connect my laptop to the wired network, the share disappears.
Why is this?

As a client OS X supports the major two VPN protocols, PPTP and L2TP over IPSec. As a server technically OS X supports both of these too but the difference is this sort of thing was more aimed at OS X Server so there is no nice GUI to work with.
Of course I wouldn't have suggested this if there wasn't a nicer solution at hand. I'm sure there are others too but what I know works (as I use it) is [iVPN|http://macserve.org.uk/projects/ivpn>, essentially a GUI wrapper to the already installed daemons. As far as performance goes it's dependent on both your connection at home and the connection wherever you are but then that would also be the case if trying to access the NAS remotely anyway. I'd also guess this will result in a safer connection too as the file sharing protocols you're using probably aren't concerned about encryption.
The only thing I'd say is I do believe there are issues if both the home network and the place you are at are both using the same private IP range, assuming both locations are behind a router. The reason being if both use the same range how can your machine know when you mean one network and not the other. Careful selection of the IP range at home though can minimise this by choosing a non-standard private IP range. So a lot of home routers, the majority I've come into contact with anyway use 192.168.0.xxx or 192.168.1.xxx. The entire 10.xxx.xxx.xxx though, assuming the router allows you to do so is open and if you pick something in the upper half the chances of both places doing the same has to be very slim.

Similar Messages

  • DHCP Server - Different Range for Wired and Wireless Network

    We have DHCP setup on Windows Server 2012r2 and the range given to us by the main HQ is 10.65.112.1-10.65.112.254 (there are several exclusions under this range)
    Now since the range gets exhausted quickly, they provided another one 10.65.122.1-10.65.122.254.
    What our branch would love to do is to dedicate the first range for Wired Computers and the other range for Wireless Devices (Phone,Tablets, Mobiles)
    Right now we have 2 different scopes setup in DHCP, the second one is disabled. In our network we have 6 access points and also have a CISCO SG300-52 Managed Switch. It has an inbuilt DHCP Server and also has the function for DHCP Relay. But we are not actually using any of its functionality as of now.
    So my question is how to have 2 separate ranges for wired and wireless network. People have mentioned vlans but I have no clue on how to get that done.
    Is there a simpler way avoding V-LANS or if not, would love to get step by step procedure on how to go about this. Any help will be much appreciated
    Regards,
    Sheldon

    Hi Sheldon, please read this post
    https://supportforums.cisco.com/thread/2270049
    You will need some modifications though. Steps 1-6 is very relevant. On step 6, you need to pay particular close attention to the "default router". If the SX300 handles your intervlan routing then the default router needs to be the IP of your VLAN. If you have a different device to handle VLAN routing then the default router needs to be that IP address.
    -Tom
    Please mark answered for helpful posts
    http://blogs.cisco.com/smallbusiness/

  • Officejet Pro L7780 Wired and wireless networking at same time

    I have an officejet pro L7780 printer that I would like to use wired and wireless networking at the same time.  It that possible.  The printer is connected directly to the network by ethernet, but I would like to print wirelessly with an ipad or iphone using HP ePrint Home and Biz.
    Thanks,
    Maurice Hawley

    The bad news: no it is not possible to have two connections active on your printer at once.
    The good news: the router will connect any device to the printer regardless of how the printer or the devices are connected.  So your iPad can print to a printer that is wired (with Ethernet) to your router.
    If it does not work, restart your router by pulling its power plug momentarily.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Using a wired AND wireless network on one machine for better security

    It occurs to me that if I could separate my Internet traffic from my LAN traffic, I could have the best security setup, so that machines on my network would only have file sharing enabled for the WIRED connection and I would use the Internet over the WIRELESS connection.
    How do I configure my PowerBook and Mac Mini to do this? In the Sharing preference pane, it doesn't allow me to specify which network port the sharing will be active on.
    And once I am conncected to both a wireless and wired network, giving each machine 2 IP addresses, how does the computer know to route the IP addresses to the right port?
    I'm using an Airport Extreme Base Station (connected to a cable modem) configured to distribute IP addresses to the wireless ports on the computers for Internet and a Linksys router distributing IP addresses to the ethernet ports on the computers with sharing turned on.

    in the Thinkvantage Access software, you can set the network preferences. So you can set the Ethernet to be your most preferred network connection method, while your wireless as the second most preferred method. Or which way you prefer.
    So for example, when you dock and the computer detects the ethernet network connection, it will automatically switch to the ethernet as it becomes available. And when you undock, your computer will switch back to wireless as ethernet is not available.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Itunes not connecting via airplay on wired and wireless network

    I have some computers on the wired part of my network, and others on wireless. My appletv2 shows in itunes on ALL (both wired and wireless) computers that there exists an AppleTv airplay speaker, but only the computers on the same "side" of the network (wired, or wireless) can actually connect and use the appletv as an airplay device. I have Bell Fibe25 and they provide 2 devices to achieve wireless connectivity, the main VDSL unit that has 4 lan ports on the back, and a basic Cisco WAP610N that connects into one of the lan ports on the VDSL unit for the wireless part.
    My firewall is turned off as well.
    Can anyone shed some light on why this is happening? My MacPro does not have wireless, and it would not be practical to connect my AppleTV2 to Ethernet cable.
    Thanks in advance,
    S

    I have Windows 7 and the same resolution fixed my problem but you do it in a slightly different way:
    Open Control Panel.
    Network and Internet
    Network and Sharing Center
    On the left menu bar select "Change adapter Settings"
    Right Click on Network Adapter (Might be Wireless or Wired or change Both) select Properties
    Under "The connection uses the following items:" UNCHECK - Internet Protocol Version 6 (TCP/IPv6)
    Click OK
    Restart Itunes and refresh Connection!
    Thanks for your help Shane

  • Wired and wireless network setup

    I have a small home network, wired right now. I would like to add a wireless access point for near future laptops. Can I add a second router that is wireless to my wired network with having to load router software on a second computer. Is this even possible. My network consists of my PC, HP M8300f desktop PC as home base/client and cable modem with linksys wired router, BEFSR41 connected to a dell 2400 desktop. I am wanting to add a linksys wireless router WRT54G some where in the living room for and access point. Do I have to load the software on the Dell PC or can I just plug in router to wall socket and connect wirelessly that way. Thanks for the help. Just thinking out side the box.
    OS Vista Home Premium 32 bit
    CPU AMD Athlon 64x2 6000+ 3.0ghz
    Motherboard Asus M4N78 Pro
    Memory 3Gb PC2-5300 DDR2 @ 667mhz
    Graphics Card BFG Nvidia Geforce 8400 GS 512MB DDR2
    Monitor(s) Displays HP W1907 LCD 19", Gateway HD 19" LCD
    Antec Earthwatt 80 plus 500 watts
    Hard Drives 640GB 7200rpm SATA (2x320)
    Other Info Optical: Super Muliti DVD burner w/lightscribe, Hauppauge WinTV HVR-1800

    You can add your WRT54g to your wired network without too much trouble if you follow a couple of simple steps:
    Turn off the DHCP server in the wireless-router.
    Create an unique wireless network name (aka SSID) and turn on WPA-PSK security.
    Make sure the web-page IP address for the wireless-router is set to a unique value different from any of the other wireless devices on your network.
    Connect the LAN port of the wireless-router to the LAN port of the Ethernet router.  Do not connect to the wireless-router's WAN port.
    This configures your wireless-router into a simple Access-Point and is the easiest way to extend your home network with wireless.
    Best Regards / Jim B
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • A very strange wired and wireless network issue

    Hello,
    I have never had any issue at all with my macbook (2008) until this week, I use it both for work and personal use.
    Most of time, I'm used to be on customer site, so I use wired and wireless connections depending of the situation....
    I have never had any issue at all with wifi neither ethernet connections during three years, until this week... and I can say this is the most strange thing I have ever seen....
    Using wired or wireless connection, always the speed of network was really good, at home, many customers, etc never had any problem...
    But this week I'm currently out of home, and the hotel where I'm staying I'm having very poor network rate....
    Using wireless connection, the download speed is no more than 10kb.... and using ethernet I get less speed... but during the day I'm on customer site, using the ethernet connection and download speed is really good, more than 500k-800k....
    I have already tried in the hotel few wifi connections (there are three) and differents wired connections (in diferent rooms) and the download speed is always the same, no more than 10kb...
    During this afternoon, I could go into hotel's lab and could connect directly to the router using cable, same speed no more than 10kb....
    The most strange thing is on their computers the download speed using wired connection is around 6Mb....
    how is possible I'm getting no more than 10kb of download speed when the pc's at hotel using same wired connection gets 6Mb?
    I have already deleted current network connections, execute onyx to clear everything, perform dhcp connection, tried manual ip etc, and always the results are the same...
    I know there is no problem with the macbook, because it works pretty good at every location I've been... but until this week...
    Sincerely I'm getting a little crazy here, I'll appreciate any help!!!
    thanks in advance

    I've seen something like this on my T400 when it was running Vista.  Now that I use Win 7 it's been OK. I rather doubt that your issue is the same but I'm tossing it out here just on the off chance.
    Im my case, I had to downgrade my Intel 5300 card to a 5100 (as suggested by a Lenovo 2nd-tier tech) to get things working.
    My symptoms were a little different.  Wifi was fine until I went back to a wired network.  After that, trying to use the same wifi AP as before would end up associated, but no internet access.  DHCP wasn't working.  The GUI "find" app didn't work as expected either.  Some APs showed up, and some didn't.
    If I configured for automatic connection to my home AP it would try and fail.  Just rebooting at that point would again attempt an automatic connection that would succeed.
    What I have noticed now that I run Win 7 is that Access Connections is completely useless.  Often the "finder" doesn't show an AP 3 feet away.  I didn't notice that this happened after a switch from wired, but maybe.
    Are you using Access Connections?  If so, you might try uninstalling it.
    Sorry I can't be of real help,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Yosemite no wired or wireless network

    Since upgrading to Yosemite neither my MacBook Pro 15 (Retina Mid 2012) or my MacBook Pro 17 (Early 2011) will connect to the internet by Thunderbolt wired connection or wirelessly via my Airport Time Capsule.  We have many iPads and iPhones in the house all connecting through the Airport Time Capsule, no problem.  Both my iMacs have been upgraded to Yosemite and they seem to be working OK wired and wirelessly.
    Does anyone have any idea how to solve this problem on no network connectivity with my MacBook Pro's.  I have wasted hours and hours on this problem and have got absolutely nowhere.  I think I may have fixed it, until I reboot and then several hours of frustration before wireless works again.  I have given up on wired, I have not managed to connect using a wired connection once since the upgrade.
    Does anyone have any ideas on how this might be fixed please?

    Hi nej,
    thanks for posting and welcome to the community. As you may already know when it comes to wireless issue there are many factors that can cause that different factors to look at. However in your case I would suggest you to click on "Start" and in the search field type "Services.msc". Click on services and once the services window opens, search for "WLAN AutoConfig". Doulble lick on it and check if the service is started or not? If it is not, ensure that it is started.
    Hope this helps.
    Regards

  • Create a wireless network AND Internet sharing?

    Hi all,
    I own a MacBook Pro and an iPhone, and currently live at a state university. The problem is that the wireless network won't allow communication between devices, only to the internet, and you aren't allowed to have a wireless router. You are, by some strange loophole, allowed to share an internet connection from a computer. My problem is that I either can share the Internet (which doesn't allow me to use apps that use WiFi to communicate with my Mac, like iDisplay) or create a wireless network (which means I can't connect to the internet via WiFi on my phone). So here's my question:
    How can I share my internet connection with my iPhone as well as be able to use apps that communicate with my mac, such as iDisplay?
    Any insight would be appreciated.
    Thanks!

    Your Mac is already using the Wifi to connect to the  network, you don't have control over the router can't have one, so you can't make any changes to have your iPhone use the router to communicate with your Mac.
    They likely already have enough bandwidth issues as it is to allow streaming between devices on the local network too.
    Open Mesh with Internet Sharing via the Mac's Ethernet port and a Cat5 cable?

  • Wireless Network cannot locate shared printers

    I have a brand new T400. My unit recognizes my Linksys wireless network but it cannot locate my shared printers when connected to the network. The printers do not show up in the printer section of Control Panel.
    Obviously I am doing something wrong. Any help would be appreciate.
    I contacted Lenovo but was treated rudely. My first contact said they did not have any one do help with that. After insisting I was connected to another person who had less knowledge than me. He said he would call be back. That was three days ago.
    What a wonderful introduction to Lenovo. I hope I didn't make a mistake in buying a Lenovo laptop.

    Hello coop3842,
    Here is a link that will help you sort out your problem:
    http://windowshelp.microsoft.com/Windows/en-US/Help/e3faee7d-a7cd-40aa-b240-006dca11dc451033.mspx
    Message Edited by Stealth on 06-15-2009 06:18 AM

  • I want to add new mac to existing wired and wireless network

    I have a imac 400mz connected (ethernet) to a network - CABLE Modem to Balkin 5.4 G Wire/Wireless router. I have 2 wintel machines hard wired, plus 1 via Motorola PCIMA wireless. I want to add either of the following new Apple products -
    mini mac or imac 17 - both have Airport extereme installed. OK how do I get the new apple on to the existing network.
    Please advise

    On the Mac - click on the Airport menu icon located near the right side of the MacOS menu bar at the top of the screen. A list of all in-range wireless networks will appear. Click on the name of your wireless network to connnect to it. If your wireless network is protected by WEP or WPA security, the Mac will prompt you to enter the key. That's it!

  • Setting network name for shared music...

    How do I set the name of my shared music so it doesn't say somenting stupid like "Joe Blow's Music"?

    iTunes Preferences > General > look for Shared Name at the bottom of the page. Name it whatever you like.

  • How to set up an integrated wired and wireless network

    I have an iMac 17" 1GHz connected to a ethernet hub which in turn is connected to a DSL modem and from there to my ISP. I also have a MacBook Pro wirelessly connected to an AirPort Express; the AE is connected to the same ethernet hub through its ethernet port.
    I can connect to the Internet wirelesly using the MacBook Pro, but I can not seem to connect to the iMac.
    How can I keep the iMac wired and the MacBook Pro wireless, but see both on a network? The AE instructions don't seem to have an example for this kind of network.
    Any help would be greatly appreciated!
    Cheers,
    Martin
    MacBook Pro   Mac OS X (10.4.6)  
    MacBook Pro   Mac OS X (10.4.6)  

    Martin,
    As Frank said, you'll need a router with DHCP and NAT abilities (nearly all have this) connected to the modem.
    But just in case your "ethernet hub" is actually a router, just re-configure the AE not to distribute IP addresses - AirPort Admin Utility - Network tab. Try that and let us know.
    For minimal clutter, if you were DSL broadband instead of cable, you could sell the modem, sell the ethernet router, sell the Airport Express and buy a single Ethernet and Wireless DSL modem router - for less than the price of the AE. Some people like to keep the modem separate to make upgrades to the modem cheaper. My solution is to buy a decent modem in the first place, ie make sure it has ADSL2+. Almost all modem/routers do this now, even my ancient ones have firmware upgrades to offer this.
    For minimal spend, you can pick up an Ethernet router for about $30. Just replace your ethernet hub with it.

  • Wired and wireless network problem

    I have an Airport Extreme setup with an 20" imac connected thru ethernet. I also have a 17" Macbook Pro connected wireless. Both have no problems connecting to the internet but I want to be able to talk to each other. I checked and the wired network has a different subnet then the wireless one. I would like to have them both on the same subnet but I can't seem to find a setting in my airport extreme that will allow me to change that.. The wired network seems to be the same subnet as the assigned address from my ISP. I only have 1 address from my ISP so the airport is not acting like a switch it is routing the data just creating a internal network based on the ip from the ISP. The wireless is handing out ip address that I have setup in the DHCP section.
    Message was edited by: Chadwick-P

    Hmmmm
    It sounds like you have your AirPort Extreme configured to be in bridge mode? Is this the case?
    If it is the case, then you can configure it to "share a single IP address" and then both the wired 20" iMac and the MBP would get DHCP addresses on the same subnet....
    If your Airport Extreme is already setup to share a single IP address then the two stations really ought to have IP addresses from the same subnet. Perhaps one of more of them has a static IP and is not setup to use DHCP?

  • Autoselection for a switch between wired and wireless network

    Hello,
    We currently have a VTC codec installed on a mobile cart that can connect via wireless or wired network.  The cart has the Linksys WET610N Dual-Band Wireless-N gaming and video adapter bridge.  If you want to go wireless you will have to unplug the CAT5 that goes into the walljack and plug in the cable from the bridge into the codec. 
    We need a 3-5 port switch. Port 1 will connect to the wireless bridge.  Port 2 would be available to connect to a wall jack.  Port 3 will connect to the codec.
    We need the ability for the switch to autoselect port 1 and 2.  If Port 2 is not connected (no link light), then Port 1 will be active.  If Port 2 is active, Port 1 will be inactive. 
    I need to know how to configure the bridge and a network switch if this is scenerio is possible.  Any help is appreciated.
    Thanks,
    Aaron

    Well, I thought i had tried this before, but I followed another board's suggestion of turning of IGMP proxy and it is now working. I can see my iTunes server which is wired on my wireless devices.

Maybe you are looking for

  • I can't delete any folders in cc.

    I checked the list view and then choose the folder to send to archives, but there is no archive folder choice to send it to. As I understand it I must send my files to the archives to delete them.

  • HELP NEEDED.  Cannot connect to Music Store.

    After upgrading to iTunes 6 I have been unable to connect to the Music Store or download any tracks. Its not my Norton Internet Security and my Windows Firewall is off. In fact, nothing has changed on my PC apart from upgrading iTunes, at which point

  • Not Getting Video Signal

    I just purchased an 80 GB Black iPod Classic today and I was told by the Apple salesman to also purchase the "iPod A/V Cable" so I can also view videos. It cost about $19.99 and so I purchased it. After syncing everything into my iPod, I get ready to

  • NLS PARAMETER

    Good Afternoon: Exist any parameters NLS_ for change the presentation format of Numeric fields as NLS_DATE_FORMAT for date fields? Example I have defined the field AMOUNT NUMBER(8,2). When I select this field is showed like: AMOUNT 80 23.2 25.45 I li

  • Galaxy Nexus - will it be global-ready?

    Now that Google/Samsung and even Verizon have officially announced the Samsung Galaxy Nexus, does anyone know if this will be the first 4G LTE device that is capable of globa-roaming on GSM? I was ready to get the iphone4S due to lack of the galaxy s