Wired works, wireless don't

i will try not to write too much here, but i want to be thorough...
at work, we have 5 ae's. 4 on our lan (using radius) and one on dsl, off the network, for visitors. the dsl one uses wpa2, and i change the pw every 2 weeks. the setup works well for us. until last week...
on wednesday, last week, i changed the wpa2 pw on our external ae, same as i always do. after clicking update and letting the ae reboot, well, it must have got corrupted. after multiple resets and imports of the config file, i gave up and took it to the apple store, where they were kind enough to flat-out swap me out with a new one. (yay, apple store guy!). it looks like there's more going on here than just a bad ae, however.
normally, i would plug the ae into a lan port, open au (airport utility) on my mac, and either manually configure or import a backup config. i would then move the ae over to an external port (patched down to the dsl modem in the server room) and that would be that. every time i would configure the ae, however, it would stop showing up both in the au and wireless. after resetting the new ae multiple times, i got smart(er). i am now using a windows laptop with au installed and making changes to the ae via ethernet, as opposed to wireless. that way, i can still get to it even if it stops broadcasting, which it has. so...
no matter what i do, i can see and configure the ae via ethernet, but i just cannot figure out *** is going on with the wireless. (btw, the laptop is pulling ip in the correct range from the ae via ethernet). i have checked every single setting (and tried changing just about every setting) and everything looks good. i have a green light on the front. but, again, i cannot find it wirelessly in airport or au or windows wireless. also, i have rebooted the dsl modem, to no avail. i also downgraded the ae from 7.3.2. to 7.3.1 to match our other ae's, again, to no avail.
i know this is complicated to tech out via a forum, but any advise on what i'm missing/forgetting/not-able-to-find would be greatly appreciated. also, you'll probably have questions: fire away. i can answer anything you need to know.
thx!!

thx, smokerz. removing all security is one of the things i have already tried. and i've moved the ae from the conference room (original location) to my office and back and forth and all around. still no love.
thx, and keep those cards and letters coming!

Similar Messages

WRT610n VPN / exchange issue can't connect to server when wired (works wireless)

I had issues with connecting to my exchange server over the internet and while still in warranty I got assistance to fix that issue. What I did not notice then or maybe it started later when I have tried to do the same thing directly wired to the router ( for faster updating) I can't make the connection. It seems truly bizarre that it would work wirelessly but not when wired. I'm now out of warranty and they want me to pay to have them give me the settings needed to make it work.

Reduce MTU value to 1365 on the router.Also,do port trigerring for the ports number 47,443-447,500,1723,2350 on the router.

Wired works, Wireless doesn't

When I connect my computer with a wire router is works just fine and I have no problem getting online but when tried to setup a wireless route it won't let me go online. All the lights are on (power, WLAN, Ethernet channel and Internet). What am I doing wrong?
Solved!
Go to Solution.

Did you setup security on the router. Did you set a unique SSID. Has this ever worked before. What Operating System are you using. What model router do you have.
Linksys WRT350N v1 (Firmware Version 1.03.7)
Message Edited by dallascowboys1 on 11-26-2008 03:41 AM

Wired and Wireless sometimes work (mostly not) after update.

So I have an issue with my network connection. It sometimes works, sometimes doesn't (mostly doesn't). This is for both wired and wireless. This started to happen a couple of days ago after an update. I had not updated for about a month prior. Prior to the update I used WICD and it worked just fine with no problems. I have no exotic hardware (ipw2200 using its firmware, dell xps gen2 notebook) and I set up everything about 6 months ago based on all the wikis. I have a dlink dir-825 router. Both wired and wireless connections work in windows every boot so it's not hardware.
I've included as much info as possible... sorry for the length.
Things I've tried:
Removing the ! from the INTERFACES=(!eth0 !eth1) in rc.conf
Removing netfs from the daemons
all the hostnames match in hosts and rc.conf
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="local"
USEDIRECTISA="no"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave cpufreq_conservative cpufreq_userspace fuse ipw2200)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="stupendiousman"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(!eth0 !eth1)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal cpufreq wicd alsa crond fam bluetooth)
Here is my hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost stupendiousman
# End of file
Here is my mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
CRYPTO_MODULES="aes_generic aes_i586 dm_crypt xts"
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish. This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
# FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
# This setup specifies all modules in the MODULES setting above.
# No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
# This setup will autodetect all modules for your system and should
# work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
# This is identical to the above, except the old ide subsystem is
# used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
# This setup will generate a 'full' image which supports most systems.
# No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
# This setup assembles an pata raid array with an encrypted root FS.
# Note: See 'mkinitcpio -H raid' for more information on raid devices.
# HOOKS="base udev pata raid encrypt filesystems"
# This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata encrypt lvm2 resume filesystems firmware"
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation NV41.9 [GeForce Go 6800 Ultra] (rev a2)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
ifconfig returns:
[rick@stupendiousman ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:F0:3E:CA:66
inet6 addr: fe80::212:f0ff:fe3e:ca66/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:4454 (4.3 Kb)
Interrupt:17 Base address:0x6000 Memory:dcfef000-dcfeffff
eth1 Link encap:Ethernet HWaddr 00:11:43:72:B5:96
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
If I do a iwlist scan I get:
[rick@stupendiousman ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 No scan results
eth1 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
Here is a portion of my /var/log/wicd/wicd.log
2009/08/15 09:19:29 :: ---------------------------
2009/08/15 09:19:29 :: wicd initializing...
2009/08/15 09:19:29 :: ---------------------------
2009/08/15 09:19:29 :: wicd is version 1.6.2 436
2009/08/15 09:19:29 :: setting backend to external
2009/08/15 09:19:29 :: trying to load backend external
2009/08/15 09:19:30 :: successfully loaded backend external
2009/08/15 09:19:30 :: trying to load backend external
2009/08/15 09:19:30 :: successfully loaded backend external
2009/08/15 09:19:30 :: Automatically detected wireless interface eth0
2009/08/15 09:19:30 :: setting wireless interface eth1
2009/08/15 09:19:30 :: automatically detected wired interface eth1
2009/08/15 09:19:30 :: setting wired interface eth0
2009/08/15 09:19:30 :: setting wpa driver wext
2009/08/15 09:19:30 :: setting use global dns to False
2009/08/15 09:19:30 :: setting global dns
2009/08/15 09:19:30 :: global dns servers are None None None
2009/08/15 09:19:30 :: domain is None
2009/08/15 09:19:30 :: search domain is None
2009/08/15 09:19:30 :: setting automatically reconnect when connection drops True
2009/08/15 09:19:30 :: Setting dhcp client to 0
2009/08/15 09:19:30 :: Wireless configuration file found...
2009/08/15 09:19:30 :: Wired configuration file found...
2009/08/15 09:19:30 :: chmoding configuration files 0600...
2009/08/15 09:19:30 :: chowning configuration files root:root...
2009/08/15 09:19:30 :: Using wireless interface...eth1
2009/08/15 09:19:30 :: Using wired interface...eth0
2009/08/15 09:19:36 :: Autoconnecting...
2009/08/15 09:19:39 :: Attempting to autoconnect with wired interface...
2009/08/15 09:19:39 :: Putting interface down
2009/08/15 09:19:39 :: Releasing DHCP leases...
2009/08/15 09:19:39 :: Setting false IP...
2009/08/15 09:19:39 :: Flushing the routing table...
2009/08/15 09:19:39 :: Putting interface up...
2009/08/15 09:19:39 :: Running DHCP
2009/08/15 09:19:39 :: dhcpcd: version 5.0.6 starting
2009/08/15 09:19:39 ::
2009/08/15 09:19:39 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 09:19:39 ::
2009/08/15 09:20:09 :: dhcpcd: timed out
2009/08/15 09:20:09 ::
2009/08/15 09:20:09 :: DHCP connection failed
2009/08/15 09:20:09 :: exiting connection thread
2009/08/15 09:20:11 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 09:20:11 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 09:20:11 :: Sending connection attempt result dhcp_failed
2009/08/15 09:21:03 :: trying to load backend ioctl
2009/08/15 09:21:03 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
2009/08/15 09:21:03 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
2009/08/15 09:21:03 :: trying to load backend external
2009/08/15 09:21:10 :: Putting interface down
2009/08/15 09:21:10 :: Releasing DHCP leases...
2009/08/15 09:21:10 :: Setting false IP...
2009/08/15 09:21:10 :: Flushing the routing table...
2009/08/15 09:21:10 :: Putting interface up...
2009/08/15 09:21:10 :: Running DHCP
2009/08/15 09:21:10 :: dhcpcd: version 5.0.6 starting
2009/08/15 09:21:10 ::
2009/08/15 09:21:10 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 09:21:10 ::
2009/08/15 09:21:40 :: dhcpcd: timed out
2009/08/15 09:21:40 ::
2009/08/15 09:21:40 :: DHCP connection failed
2009/08/15 09:21:40 :: exiting connection thread
2009/08/15 09:21:40 :: Sending connection attempt result dhcp_failed
2009/08/15 09:22:28 :: Putting interface down
2009/08/15 09:22:28 :: Releasing DHCP leases...
2009/08/15 09:22:28 :: Setting false IP...
2009/08/15 09:22:28 :: Flushing the routing table...
2009/08/15 09:22:28 :: Putting interface up...
2009/08/15 09:22:28 :: Running DHCP
2009/08/15 09:22:28 :: dhcpcd: version 5.0.6 starting
2009/08/15 09:22:28 ::
2009/08/15 09:22:28 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 09:22:28 ::
2009/08/15 09:22:58 :: dhcpcd: timed out
2009/08/15 09:22:58 ::
2009/08/15 09:22:58 :: DHCP connection failed
2009/08/15 09:22:58 :: exiting connection thread
2009/08/15 09:22:58 :: Sending connection attempt result dhcp_failed
2009/08/15 09:23:17 :: Daemon going down, killing wicd-monitor...
2009/08/15 09:23:17 :: Removing PID file...
2009/08/15 09:23:17 :: Shutting down...
2009/08/15 13:16:59 :: ---------------------------
2009/08/15 13:16:59 :: wicd initializing...
2009/08/15 13:16:59 :: ---------------------------
2009/08/15 13:16:59 :: wicd is version 1.6.2 436
2009/08/15 13:16:59 :: setting backend to external
2009/08/15 13:16:59 :: trying to load backend external
2009/08/15 13:17:00 :: successfully loaded backend external
2009/08/15 13:17:00 :: trying to load backend external
2009/08/15 13:17:00 :: successfully loaded backend external
2009/08/15 13:17:00 :: Automatically detected wireless interface eth0
2009/08/15 13:17:00 :: setting wireless interface eth1
2009/08/15 13:17:00 :: automatically detected wired interface eth1
2009/08/15 13:17:00 :: setting wired interface eth0
2009/08/15 13:17:00 :: setting wpa driver wext
2009/08/15 13:17:00 :: setting use global dns to False
2009/08/15 13:17:00 :: setting global dns
2009/08/15 13:17:00 :: global dns servers are None None None
2009/08/15 13:17:00 :: domain is None
2009/08/15 13:17:00 :: search domain is None
2009/08/15 13:17:00 :: setting automatically reconnect when connection drops True
2009/08/15 13:17:00 :: Setting dhcp client to 0
2009/08/15 13:17:00 :: Wireless configuration file found...
2009/08/15 13:17:00 :: Wired configuration file found...
2009/08/15 13:17:00 :: chmoding configuration files 0600...
2009/08/15 13:17:00 :: chowning configuration files root:root...
2009/08/15 13:17:00 :: Using wireless interface...eth1
2009/08/15 13:17:00 :: Using wired interface...eth0
2009/08/15 13:17:06 :: Autoconnecting...
2009/08/15 13:17:09 :: Attempting to autoconnect with wired interface...
2009/08/15 13:17:09 :: Putting interface down
2009/08/15 13:17:09 :: Releasing DHCP leases...
2009/08/15 13:17:09 :: Setting false IP...
2009/08/15 13:17:09 :: Flushing the routing table...
2009/08/15 13:17:09 :: Putting interface up...
2009/08/15 13:17:09 :: Running DHCP
2009/08/15 13:17:09 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:17:09 ::
2009/08/15 13:17:09 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:17:09 ::
2009/08/15 13:17:39 :: dhcpcd: timed out
2009/08/15 13:17:39 ::
2009/08/15 13:17:39 :: DHCP connection failed
2009/08/15 13:17:39 :: exiting connection thread
2009/08/15 13:17:41 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:17:41 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:17:41 :: Sending connection attempt result dhcp_failed
2009/08/15 13:18:10 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:18:10 :: Removing PID file...
2009/08/15 13:18:10 :: Shutting down...
2009/08/15 13:19:01 :: ---------------------------
2009/08/15 13:19:01 :: wicd initializing...
2009/08/15 13:19:01 :: ---------------------------
2009/08/15 13:19:01 :: wicd is version 1.6.2 436
2009/08/15 13:19:01 :: setting backend to external
2009/08/15 13:19:01 :: trying to load backend external
2009/08/15 13:19:02 :: successfully loaded backend external
2009/08/15 13:19:02 :: trying to load backend external
2009/08/15 13:19:02 :: successfully loaded backend external
2009/08/15 13:19:02 :: Automatically detected wireless interface eth0
2009/08/15 13:19:02 :: setting wireless interface eth1
2009/08/15 13:19:02 :: automatically detected wired interface eth1
2009/08/15 13:19:02 :: setting wired interface eth0
2009/08/15 13:19:02 :: setting wpa driver wext
2009/08/15 13:19:02 :: setting use global dns to False
2009/08/15 13:19:02 :: setting global dns
2009/08/15 13:19:02 :: global dns servers are None None None
2009/08/15 13:19:02 :: domain is None
2009/08/15 13:19:02 :: search domain is None
2009/08/15 13:19:02 :: setting automatically reconnect when connection drops True
2009/08/15 13:19:02 :: Setting dhcp client to 0
2009/08/15 13:19:02 :: Wireless configuration file found...
2009/08/15 13:19:02 :: Wired configuration file found...
2009/08/15 13:19:02 :: chmoding configuration files 0600...
2009/08/15 13:19:02 :: chowning configuration files root:root...
2009/08/15 13:19:02 :: Using wireless interface...eth1
2009/08/15 13:19:02 :: Using wired interface...eth0
2009/08/15 13:19:08 :: Autoconnecting...
2009/08/15 13:19:11 :: Attempting to autoconnect with wired interface...
2009/08/15 13:19:11 :: Putting interface down
2009/08/15 13:19:11 :: Releasing DHCP leases...
2009/08/15 13:19:11 :: Setting false IP...
2009/08/15 13:19:11 :: Flushing the routing table...
2009/08/15 13:19:11 :: Putting interface up...
2009/08/15 13:19:11 :: Running DHCP
2009/08/15 13:19:11 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:19:11 ::
2009/08/15 13:19:11 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:19:11 ::
2009/08/15 13:19:41 :: dhcpcd: timed out
2009/08/15 13:19:41 ::
2009/08/15 13:19:41 :: DHCP connection failed
2009/08/15 13:19:41 :: exiting connection thread
2009/08/15 13:19:43 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:19:43 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:19:43 :: Sending connection attempt result dhcp_failed
2009/08/15 13:30:36 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:30:36 :: Removing PID file...
2009/08/15 13:30:36 :: Shutting down...
2009/08/15 13:31:29 :: ---------------------------
2009/08/15 13:31:29 :: wicd initializing...
2009/08/15 13:31:29 :: ---------------------------
2009/08/15 13:31:29 :: wicd is version 1.6.2 436
2009/08/15 13:31:29 :: setting backend to external
2009/08/15 13:31:29 :: trying to load backend external
2009/08/15 13:31:30 :: successfully loaded backend external
2009/08/15 13:31:30 :: trying to load backend external
2009/08/15 13:31:30 :: successfully loaded backend external
2009/08/15 13:31:30 :: Automatically detected wireless interface eth0
2009/08/15 13:31:30 :: setting wireless interface eth1
2009/08/15 13:31:30 :: automatically detected wired interface eth1
2009/08/15 13:31:30 :: setting wired interface eth0
2009/08/15 13:31:30 :: setting wpa driver wext
2009/08/15 13:31:30 :: setting use global dns to False
2009/08/15 13:31:30 :: setting global dns
2009/08/15 13:31:30 :: global dns servers are None None None
2009/08/15 13:31:30 :: domain is None
2009/08/15 13:31:30 :: search domain is None
2009/08/15 13:31:30 :: setting automatically reconnect when connection drops True
2009/08/15 13:31:30 :: Setting dhcp client to 0
2009/08/15 13:31:30 :: Wireless configuration file found...
2009/08/15 13:31:30 :: Wired configuration file found...
2009/08/15 13:31:30 :: chmoding configuration files 0600...
2009/08/15 13:31:30 :: chowning configuration files root:root...
2009/08/15 13:31:30 :: Using wireless interface...eth1
2009/08/15 13:31:30 :: Using wired interface...eth0
2009/08/15 13:31:37 :: Autoconnecting...
2009/08/15 13:31:39 :: Attempting to autoconnect with wired interface...
2009/08/15 13:31:39 :: Putting interface down
2009/08/15 13:31:39 :: Releasing DHCP leases...
2009/08/15 13:31:39 :: Setting false IP...
2009/08/15 13:31:39 :: Flushing the routing table...
2009/08/15 13:31:39 :: Putting interface up...
2009/08/15 13:31:39 :: Running DHCP
2009/08/15 13:31:39 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:31:39 ::
2009/08/15 13:31:40 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:31:40 ::
2009/08/15 13:32:09 :: dhcpcd: timed out
2009/08/15 13:32:09 ::
2009/08/15 13:32:09 :: DHCP connection failed
2009/08/15 13:32:09 :: exiting connection thread
2009/08/15 13:32:12 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:32:12 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:32:12 :: Sending connection attempt result dhcp_failed
2009/08/15 13:38:00 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:38:00 :: Removing PID file...
2009/08/15 13:38:00 :: Shutting down...
2009/08/15 13:39:19 :: ---------------------------
2009/08/15 13:39:19 :: wicd initializing...
2009/08/15 13:39:19 :: ---------------------------
2009/08/15 13:39:19 :: wicd is version 1.6.2 436
2009/08/15 13:39:19 :: setting backend to external
2009/08/15 13:39:19 :: trying to load backend external
2009/08/15 13:39:20 :: successfully loaded backend external
2009/08/15 13:39:20 :: trying to load backend external
2009/08/15 13:39:20 :: successfully loaded backend external
2009/08/15 13:39:20 :: Automatically detected wireless interface eth0
2009/08/15 13:39:20 :: setting wireless interface eth1
2009/08/15 13:39:20 :: automatically detected wired interface eth1
2009/08/15 13:39:20 :: setting wired interface eth0
2009/08/15 13:39:20 :: setting wpa driver wext
2009/08/15 13:39:20 :: setting use global dns to False
2009/08/15 13:39:20 :: setting global dns
2009/08/15 13:39:20 :: global dns servers are None None None
2009/08/15 13:39:20 :: domain is None
2009/08/15 13:39:20 :: search domain is None
2009/08/15 13:39:20 :: setting automatically reconnect when connection drops True
2009/08/15 13:39:20 :: Setting dhcp client to 0
2009/08/15 13:39:20 :: Wireless configuration file found...
2009/08/15 13:39:20 :: Wired configuration file found...
2009/08/15 13:39:20 :: chmoding configuration files 0600...
2009/08/15 13:39:20 :: chowning configuration files root:root...
2009/08/15 13:39:20 :: Using wireless interface...eth1
2009/08/15 13:39:20 :: Using wired interface...eth0
2009/08/15 13:39:27 :: Autoconnecting...
2009/08/15 13:39:29 :: Attempting to autoconnect with wired interface...
2009/08/15 13:39:29 :: Putting interface down
2009/08/15 13:39:29 :: Releasing DHCP leases...
2009/08/15 13:39:29 :: Setting false IP...
2009/08/15 13:39:29 :: Flushing the routing table...
2009/08/15 13:39:29 :: Putting interface up...
2009/08/15 13:39:29 :: Running DHCP
2009/08/15 13:39:29 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:39:29 ::
2009/08/15 13:39:30 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:39:30 ::
2009/08/15 13:39:59 :: dhcpcd: timed out
2009/08/15 13:39:59 ::
2009/08/15 13:39:59 :: DHCP connection failed
2009/08/15 13:39:59 :: exiting connection thread
2009/08/15 13:40:02 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:40:02 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:40:02 :: Sending connection attempt result dhcp_failed
2009/08/15 13:45:10 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:45:10 :: Removing PID file...
2009/08/15 13:45:10 :: Shutting down...
2009/08/15 13:46:13 :: ---------------------------
2009/08/15 13:46:13 :: wicd initializing...
2009/08/15 13:46:13 :: ---------------------------
2009/08/15 13:46:13 :: wicd is version 1.6.2 436
2009/08/15 13:46:13 :: setting backend to external
2009/08/15 13:46:13 :: trying to load backend external
2009/08/15 13:46:14 :: successfully loaded backend external
2009/08/15 13:46:14 :: trying to load backend external
2009/08/15 13:46:14 :: successfully loaded backend external
2009/08/15 13:46:14 :: Automatically detected wireless interface eth1
2009/08/15 13:46:14 :: setting wireless interface eth1
2009/08/15 13:46:14 :: automatically detected wired interface eth0
2009/08/15 13:46:14 :: setting wired interface eth0
2009/08/15 13:46:14 :: setting wpa driver wext
2009/08/15 13:46:14 :: setting use global dns to False
2009/08/15 13:46:14 :: setting global dns
2009/08/15 13:46:14 :: global dns servers are None None None
2009/08/15 13:46:14 :: domain is None
2009/08/15 13:46:14 :: search domain is None
2009/08/15 13:46:14 :: setting automatically reconnect when connection drops True
2009/08/15 13:46:14 :: Setting dhcp client to 0
2009/08/15 13:46:14 :: Wireless configuration file found...
2009/08/15 13:46:14 :: Wired configuration file found...
2009/08/15 13:46:14 :: chmoding configuration files 0600...
2009/08/15 13:46:14 :: chowning configuration files root:root...
2009/08/15 13:46:14 :: Using wireless interface...eth1
2009/08/15 13:46:14 :: Using wired interface...eth0
2009/08/15 13:46:20 :: Autoconnecting...
2009/08/15 13:46:22 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:46:22 :: trying to automatically connect to...101
2009/08/15 13:46:22 :: Connecting to wireless network 101
2009/08/15 13:46:23 :: Putting interface down
2009/08/15 13:46:23 :: Releasing DHCP leases...
2009/08/15 13:46:23 :: Setting false IP...
2009/08/15 13:46:23 :: Stopping wpa_supplicant
2009/08/15 13:46:23 :: Flushing the routing table...
2009/08/15 13:46:23 :: Putting interface up...
2009/08/15 13:46:23 :: Generating psk...
2009/08/15 13:46:23 :: Attempting to authenticate...
2009/08/15 13:46:34 :: Running DHCP
2009/08/15 13:46:34 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:46:34 ::
2009/08/15 13:46:34 :: dhcpcd: eth1: broadcasting for a lease
2009/08/15 13:46:34 ::
2009/08/15 13:46:35 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:35 ::
2009/08/15 13:46:35 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:35 ::
2009/08/15 13:46:35 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:46:35 ::
2009/08/15 13:46:38 :: dhcpcd: eth1: carrier lost
2009/08/15 13:46:38 ::
2009/08/15 13:46:40 :: dhcpcd: eth1: carrier acquired
2009/08/15 13:46:40 ::
2009/08/15 13:46:40 :: dhcpcd: eth1: broadcasting for a lease
2009/08/15 13:46:40 ::
2009/08/15 13:46:45 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:45 ::
2009/08/15 13:46:45 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:45 ::
2009/08/15 13:46:45 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:46:45 ::
2009/08/15 13:46:51 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 13:46:51 ::
2009/08/15 13:46:51 :: dhcpcd: forking to background
2009/08/15 13:46:51 ::
2009/08/15 13:46:51 ::
2009/08/15 13:46:51 :: DHCP connection successful
2009/08/15 13:46:51 :: Connecting thread exiting.
2009/08/15 13:46:55 :: Sending connection attempt result Success
2009/08/15 13:48:50 :: Putting interface down
2009/08/15 13:48:50 :: Releasing DHCP leases...
2009/08/15 13:48:50 :: Setting false IP...
2009/08/15 13:48:51 :: Flushing the routing table...
2009/08/15 13:48:51 :: Putting interface up...
2009/08/15 13:48:51 :: Running DHCP
2009/08/15 13:48:51 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:48:51 ::
2009/08/15 13:48:51 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:48:51 ::
2009/08/15 13:48:51 :: dhcpcd: eth0: carrier lost
2009/08/15 13:48:51 ::
2009/08/15 13:48:53 :: dhcpcd: eth0: carrier acquired
2009/08/15 13:48:53 ::
2009/08/15 13:48:53 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:48:53 ::
2009/08/15 13:48:54 :: dhcpcd: eth0: offered 192.168.0.193 from 192.168.0.1
2009/08/15 13:48:54 ::
2009/08/15 13:48:54 :: dhcpcd: eth0: acknowledged 192.168.0.193 from 192.168.0.1
2009/08/15 13:48:54 ::
2009/08/15 13:48:54 :: dhcpcd: eth0: checking for 192.168.0.193
2009/08/15 13:48:54 ::
2009/08/15 13:49:00 :: dhcpcd: eth0: leased 192.168.0.193 for 86400 seconds
2009/08/15 13:49:00 ::
2009/08/15 13:49:00 :: dhcpcd: forking to background
2009/08/15 13:49:00 ::
2009/08/15 13:49:00 ::
2009/08/15 13:49:00 :: DHCP connection successful
2009/08/15 13:49:00 :: Connecting thread exiting.
2009/08/15 13:49:00 :: Sending connection attempt result Success
2009/08/15 13:53:46 :: Connecting to wireless network 102
2009/08/15 13:53:47 :: Putting interface down
2009/08/15 13:53:47 :: Releasing DHCP leases...
2009/08/15 13:53:47 :: Setting false IP...
2009/08/15 13:53:47 :: Stopping wpa_supplicant
2009/08/15 13:53:47 :: Flushing the routing table...
2009/08/15 13:53:47 :: Putting interface up...
2009/08/15 13:53:47 :: Generating psk...
2009/08/15 13:53:47 :: Attempting to authenticate...
2009/08/15 13:54:03 :: Running DHCP
2009/08/15 13:54:03 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:54:03 ::
2009/08/15 13:54:03 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 13:54:03 ::
2009/08/15 13:54:03 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:54:03 ::
2009/08/15 13:54:03 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:54:03 ::
2009/08/15 13:54:05 :: dhcpcd: eth1: carrier lost
2009/08/15 13:54:05 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: carrier acquired
2009/08/15 13:54:06 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 13:54:06 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:54:06 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:54:06 ::
2009/08/15 13:54:11 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 13:54:11 ::
2009/08/15 13:54:11 :: dhcpcd: forking to background
2009/08/15 13:54:11 ::
2009/08/15 13:54:11 ::
2009/08/15 13:54:11 :: DHCP connection successful
2009/08/15 13:54:11 :: Connecting thread exiting.
2009/08/15 13:54:11 :: Sending connection attempt result Success
2009/08/15 13:55:03 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:55:03 :: Removing PID file...
2009/08/15 13:55:03 :: Shutting down...
2009/08/15 13:55:52 :: ---------------------------
2009/08/15 13:55:52 :: wicd initializing...
2009/08/15 13:55:52 :: ---------------------------
2009/08/15 13:55:52 :: wicd is version 1.6.2 436
2009/08/15 13:55:52 :: setting backend to external
2009/08/15 13:55:52 :: trying to load backend external
2009/08/15 13:55:53 :: successfully loaded backend external
2009/08/15 13:55:53 :: trying to load backend external
2009/08/15 13:55:53 :: successfully loaded backend external
2009/08/15 13:55:53 :: Automatically detected wireless interface eth0
2009/08/15 13:55:53 :: setting wireless interface eth1
2009/08/15 13:55:53 :: automatically detected wired interface eth1
2009/08/15 13:55:53 :: setting wired interface eth0
2009/08/15 13:55:53 :: setting wpa driver wext
2009/08/15 13:55:53 :: setting use global dns to False
2009/08/15 13:55:53 :: setting global dns
2009/08/15 13:55:53 :: global dns servers are None None None
2009/08/15 13:55:53 :: domain is None
2009/08/15 13:55:53 :: search domain is None
2009/08/15 13:55:53 :: setting automatically reconnect when connection drops True
2009/08/15 13:55:53 :: Setting dhcp client to 0
2009/08/15 13:55:53 :: Wireless configuration file found...
2009/08/15 13:55:53 :: Wired configuration file found...
2009/08/15 13:55:53 :: chmoding configuration files 0600...
2009/08/15 13:55:53 :: chowning configuration files root:root...
2009/08/15 13:55:53 :: Using wireless interface...eth1
2009/08/15 13:55:53 :: Using wired interface...eth0
2009/08/15 13:55:59 :: Autoconnecting...
2009/08/15 13:56:02 :: Attempting to autoconnect with wired interface...
2009/08/15 13:56:02 :: Putting interface down
2009/08/15 13:56:02 :: Releasing DHCP leases...
2009/08/15 13:56:02 :: Setting false IP...
2009/08/15 13:56:02 :: Flushing the routing table...
2009/08/15 13:56:02 :: Putting interface up...
2009/08/15 13:56:02 :: Running DHCP
2009/08/15 13:56:02 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:56:02 ::
2009/08/15 13:56:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 13:56:02 ::
2009/08/15 13:56:12 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:56:12 ::
2009/08/15 13:56:32 :: dhcpcd: timed out
2009/08/15 13:56:32 ::
2009/08/15 13:56:32 :: DHCP connection failed
2009/08/15 13:56:32 :: exiting connection thread
2009/08/15 13:56:34 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:56:34 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:56:34 :: Sending connection attempt result dhcp_failed
2009/08/15 13:57:31 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:57:31 :: Removing PID file...
2009/08/15 13:57:31 :: Shutting down...
2009/08/15 13:57:32 :: ---------------------------
2009/08/15 13:57:32 :: wicd initializing...
2009/08/15 13:57:32 :: ---------------------------
2009/08/15 13:57:32 :: wicd is version 1.6.2 436
2009/08/15 13:57:32 :: setting backend to external
2009/08/15 13:57:32 :: trying to load backend external
2009/08/15 13:57:32 :: successfully loaded backend external
2009/08/15 13:57:32 :: trying to load backend external
2009/08/15 13:57:32 :: successfully loaded backend external
2009/08/15 13:57:32 :: Automatically detected wireless interface eth0
2009/08/15 13:57:32 :: setting wireless interface eth1
2009/08/15 13:57:32 :: automatically detected wired interface eth1
2009/08/15 13:57:32 :: setting wired interface eth0
2009/08/15 13:57:32 :: setting wpa driver wext
2009/08/15 13:57:32 :: setting use global dns to False
2009/08/15 13:57:32 :: setting global dns
2009/08/15 13:57:32 :: global dns servers are None None None
2009/08/15 13:57:32 :: domain is None
2009/08/15 13:57:32 :: search domain is None
2009/08/15 13:57:32 :: setting automatically reconnect when connection drops True
2009/08/15 13:57:32 :: Setting dhcp client to 0
2009/08/15 13:57:32 :: Wireless configuration file found...
2009/08/15 13:57:32 :: Wired configuration file found...
2009/08/15 13:57:32 :: chmoding configuration files 0600...
2009/08/15 13:57:32 :: chowning configuration files root:root...
2009/08/15 13:57:32 :: Using wireless interface...eth1
2009/08/15 13:57:32 :: Using wired interface...eth0
2009/08/15 13:57:38 :: Autoconnecting...
2009/08/15 13:57:38 :: Putting interface down
2009/08/15 13:57:38 :: Attempting to autoconnect with wired interface...
2009/08/15 13:57:38 :: Releasing DHCP leases...
2009/08/15 13:57:38 :: Setting false IP...
2009/08/15 13:57:38 :: Flushing the routing table...
2009/08/15 13:57:38 :: Putting interface up...
2009/08/15 13:57:38 :: Running DHCP
2009/08/15 13:57:38 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:57:38 ::
2009/08/15 13:57:38 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 13:57:38 ::
2009/08/15 13:57:48 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:57:48 ::
2009/08/15 13:58:08 :: dhcpcd: timed out
2009/08/15 13:58:08 ::
2009/08/15 13:58:08 :: DHCP connection failed
2009/08/15 13:58:08 :: exiting connection thread
2009/08/15 13:58:08 :: Sending connection attempt result dhcp_failed
2009/08/15 13:58:10 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:58:10 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:58:46 :: Putting interface down
2009/08/15 13:58:46 :: Releasing DHCP leases...
2009/08/15 13:58:46 :: Setting false IP...
2009/08/15 13:58:46 :: Flushing the routing table...
2009/08/15 13:58:46 :: Putting interface up...
2009/08/15 13:58:46 :: Running DHCP
2009/08/15 13:58:46 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:58:46 ::
2009/08/15 13:58:46 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 13:58:46 ::
2009/08/15 13:58:56 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:58:56 ::
2009/08/15 13:59:16 :: dhcpcd: timed out
2009/08/15 13:59:16 ::
2009/08/15 13:59:16 :: DHCP connection failed
2009/08/15 13:59:16 :: exiting connection thread
2009/08/15 13:59:16 :: Sending connection attempt result dhcp_failed
2009/08/15 14:10:08 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:10:08 :: Removing PID file...
2009/08/15 14:10:08 :: Shutting down...
2009/08/15 14:10:59 :: ---------------------------
2009/08/15 14:10:59 :: wicd initializing...
2009/08/15 14:10:59 :: ---------------------------
2009/08/15 14:10:59 :: wicd is version 1.6.2 436
2009/08/15 14:10:59 :: setting backend to external
2009/08/15 14:10:59 :: trying to load backend external
2009/08/15 14:10:59 :: successfully loaded backend external
2009/08/15 14:10:59 :: trying to load backend external
2009/08/15 14:10:59 :: successfully loaded backend external
2009/08/15 14:10:59 :: Automatically detected wireless interface eth0
2009/08/15 14:10:59 :: setting wireless interface eth1
2009/08/15 14:10:59 :: automatically detected wired interface eth1
2009/08/15 14:10:59 :: setting wired interface eth0
2009/08/15 14:10:59 :: setting wpa driver wext
2009/08/15 14:10:59 :: setting use global dns to False
2009/08/15 14:10:59 :: setting global dns
2009/08/15 14:10:59 :: global dns servers are None None None
2009/08/15 14:10:59 :: domain is None
2009/08/15 14:10:59 :: search domain is None
2009/08/15 14:10:59 :: setting automatically reconnect when connection drops True
2009/08/15 14:10:59 :: Setting dhcp client to 0
2009/08/15 14:10:59 :: Wireless configuration file found...
2009/08/15 14:10:59 :: Wired configuration file found...
2009/08/15 14:10:59 :: chmoding configuration files 0600...
2009/08/15 14:10:59 :: chowning configuration files root:root...
2009/08/15 14:10:59 :: Using wireless interface...eth1
2009/08/15 14:10:59 :: Using wired interface...eth0
2009/08/15 14:11:06 :: Autoconnecting...
2009/08/15 14:11:09 :: Attempting to autoconnect with wired interface...
2009/08/15 14:11:09 :: Putting interface down
2009/08/15 14:11:09 :: Releasing DHCP leases...
2009/08/15 14:11:09 :: Setting false IP...
2009/08/15 14:11:09 :: Flushing the routing table...
2009/08/15 14:11:09 :: Putting interface up...
2009/08/15 14:11:09 :: Running DHCP
2009/08/15 14:11:09 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:11:09 ::
2009/08/15 14:11:09 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 14:11:09 ::
2009/08/15 14:11:19 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 14:11:19 ::
2009/08/15 14:11:39 :: dhcpcd: timed out
2009/08/15 14:11:39 ::
2009/08/15 14:11:39 :: DHCP connection failed
2009/08/15 14:11:39 :: exiting connection thread
2009/08/15 14:11:41 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:11:41 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 14:11:41 :: Sending connection attempt result dhcp_failed
2009/08/15 14:13:00 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:13:00 :: Removing PID file...
2009/08/15 14:13:00 :: Shutting down...
2009/08/15 14:13:50 :: ---------------------------
2009/08/15 14:13:50 :: wicd initializing...
2009/08/15 14:13:50 :: ---------------------------
2009/08/15 14:13:50 :: wicd is version 1.6.2 436
2009/08/15 14:13:50 :: setting backend to external
2009/08/15 14:13:50 :: trying to load backend external
2009/08/15 14:13:50 :: successfully loaded backend external
2009/08/15 14:13:50 :: trying to load backend external
2009/08/15 14:13:50 :: successfully loaded backend external
2009/08/15 14:13:51 :: Automatically detected wireless interface eth1
2009/08/15 14:13:51 :: setting wireless interface eth1
2009/08/15 14:13:51 :: automatically detected wired interface eth0
2009/08/15 14:13:51 :: setting wired interface eth0
2009/08/15 14:13:51 :: setting wpa driver wext
2009/08/15 14:13:51 :: setting use global dns to False
2009/08/15 14:13:51 :: setting global dns
2009/08/15 14:13:51 :: global dns servers are None None None
2009/08/15 14:13:51 :: domain is None
2009/08/15 14:13:51 :: search domain is None
2009/08/15 14:13:51 :: setting automatically reconnect when connection drops True
2009/08/15 14:13:51 :: Setting dhcp client to 0
2009/08/15 14:13:51 :: Wireless configuration file found...
2009/08/15 14:13:51 :: Wired configuration file found...
2009/08/15 14:13:51 :: chmoding configuration files 0600...
2009/08/15 14:13:51 :: chowning configuration files root:root...
2009/08/15 14:13:51 :: Using wireless interface...eth1
2009/08/15 14:13:51 :: Using wired interface...eth0
2009/08/15 14:13:57 :: Autoconnecting...
2009/08/15 14:13:59 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:14:00 :: trying to automatically connect to...101
2009/08/15 14:14:00 :: Connecting to wireless network 101
2009/08/15 14:14:00 :: Putting interface down
2009/08/15 14:14:00 :: Releasing DHCP leases...
2009/08/15 14:14:00 :: Setting false IP...
2009/08/15 14:14:00 :: Stopping wpa_supplicant
2009/08/15 14:14:00 :: Flushing the routing table...
2009/08/15 14:14:00 :: Putting interface up...
2009/08/15 14:14:00 :: Generating psk...
2009/08/15 14:14:01 :: Attempting to authenticate...
2009/08/15 14:14:11 :: Running DHCP
2009/08/15 14:14:11 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:14:11 ::
2009/08/15 14:14:11 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 14:14:11 ::
2009/08/15 14:14:11 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 14:14:11 ::
2009/08/15 14:14:11 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 14:14:11 ::
2009/08/15 14:14:15 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 14:14:15 ::
2009/08/15 14:14:15 :: dhcpcd: forking to background
2009/08/15 14:14:15 ::
2009/08/15 14:14:15 ::
2009/08/15 14:14:15 :: DHCP connection successful
2009/08/15 14:14:15 :: Connecting thread exiting.
2009/08/15 14:14:17 :: Sending connection attempt result Success
2009/08/15 14:14:17 :: Autoconnecting...
2009/08/15 14:14:17 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:14:17 :: trying to automatically connect to...102
2009/08/15 14:14:17 :: Connecting to wireless network 102
2009/08/15 14:14:17 :: Putting interface down
2009/08/15 14:14:17 :: Releasing DHCP leases...
2009/08/15 14:14:18 :: Setting false IP...
2009/08/15 14:14:18 :: Stopping wpa_supplicant
2009/08/15 14:14:18 :: Flushing the routing table...
2009/08/15 14:14:18 :: Putting interface up...
2009/08/15 14:14:18 :: Generating psk...
2009/08/15 14:14:18 :: Attempting to authenticate...
2009/08/15 14:14:19 :: Running DHCP
2009/08/15 14:14:19 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:14:19 ::
2009/08/15 14:14:19 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 14:14:19 ::
2009/08/15 14:14:19 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 14:14:19 ::
2009/08/15 14:14:19 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 14:14:19 ::
2009/08/15 14:14:24 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 14:14:24 ::
2009/08/15 14:14:24 :: dhcpcd: forking to background
2009/08/15 14:14:24 ::
2009/08/15 14:14:24 ::
2009/08/15 14:14:24 :: DHCP connection successful
2009/08/15 14:14:24 :: Connecting thread exiting.
2009/08/15 14:14:29 :: Sending connection attempt result Success
2009/08/15 14:15:02 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:15:02 :: Removing PID file...
2009/08/15 14:15:02 :: Shutting down...
2009/08/15 14:15:52 :: ---------------------------
2009/08/15 14:15:52 :: wicd initializing...
2009/08/15 14:15:52 :: ---------------------------
2009/08/15 14:15:52 :: wicd is version 1.6.2 436
2009/08/15 14:15:52 :: setting backend to external
2009/08/15 14:15:52 :: trying to load backend external
2009/08/15 14:15:52 :: successfully loaded backend external
2009/08/15 14:15:52 :: trying to load backend external
2009/08/15 14:15:52 :: successfully loaded backend external
2009/08/15 14:15:52 :: Automatically detected wireless interface eth0
2009/08/15 14:15:52 :: setting wireless interface eth1
2009/08/15 14:15:52 :: automatically detected wired interface eth1
2009/08/15 14:15:52 :: setting wired interface eth0
2009/08/15 14:15:52 :: setting wpa driver wext
2009/08/15 14:15:52 :: setting use global dns to False
2009/08/15 14:15:52 :: setting global dns
2009/08/15 14:15:52 :: global dns servers are None None None
2009/08/15 14:15:52 :: domain is None
2009/08/15 14:15:52 :: search domain is None
2009/08/15 14:15:52 :: setting automatically reconnect when connection drops True
2009/08/15 14:15:52 :: Setting dhcp client to 0
2009/08/15 14:15:52 :: Wireless configuration file found...
2009/08/15 14:15:52 :: Wired configuration file found...
2009/08/15 14:15:52 :: chmoding configuration files 0600...
2009/08/15 14:15:52 :: chowning configuration files root:root...
2009/08/15 14:15:52 :: Using wireless interface...eth1
2009/08/15 14:15:52 :: Using wired interface...eth0
2009/08/15 14:15:59 :: Autoconnecting...
2009/08/15 14:16:02 :: Attempting to autoconnect with wired interface...
2009/08/15 14:16:02 :: Putting interface down
2009/08/15 14:16:02 :: Releasing DHCP leases...
2009/08/15 14:16:02 :: Setting false IP...
2009/08/15 14:16:02 :: Flushing the routing table...
2009/08/15 14:16:02 :: Putting interface up...
2009/08/15 14:16:02 :: Running DHCP
2009/08/15 14:16:02 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:16:02 ::
2009/08/15 14:16:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 14:16:02 ::
2009/08/15 14:16:12 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 14:16:12 ::
2009/08/15 14:16:32 :: dhcpcd: timed out
2009/08/15 14:16:32 ::
2009/08/15 14:16:32 :: DHCP connection failed
2009/08/15 14:16:32 :: exiting connection thread
2009/08/15 14:16:34 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:16:34 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 14:16:34 :: Sending connection attempt result dhcp_failed
2009/08/15 14:17:02 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:17:02 :: Removing PID file...
2009/08/15 14:17:02 :: Shutting down...
2009/08/15 15:39:03 :: ---------------------------
2009/08/15 15:39:03 :: wicd initializing...
2009/08/15 15:39:03 :: ---------------------------
2009/08/15 15:39:03 :: wicd is version 1.6.2 436
2009/08/15 15:39:03 :: setting backend to external
2009/08/15 15:39:03 :: trying to load backend external
2009/08/15 15:39:03 :: successfully loaded backend external
2009/08/15 15:39:03 :: trying to load backend external
2009/08/15 15:39:03 :: successfully loaded backend external
2009/08/15 15:39:03 :: Automatically detected wireless interface eth0
2009/08/15 15:39:03 :: setting wireless interface eth1
2009/08/15 15:39:03 :: automatically detected wired interface eth1
2009/08/15 15:39:03 :: setting wired interface eth0
2009/08/15 15:39:03 :: setting wpa driver wext
2009/08/15 15:39:03 :: setting use global dns to False
2009/08/15 15:39:03 :: setting global dns
2009/08/15 15:39:03 :: global dns servers are None None None
2009/08/15 15:39:03 :: domain is None
2009/08/15 15:39:03 :: search domain is None
2009/08/15 15:39:03 :: setting automatically reconnect when connection drops True
2009/08/15 15:39:03 :: Setting dhcp client to 0
2009/08/15 15:39:03 :: Wireless configuration file found...
2009/08/15 15:39:03 :: Wired configuration file found...
2009/08/15 15:39:03 :: chmoding configuration files 0600...
2009/08/15 15:39:03 :: chowning configuration files root:root...
2009/08/15 15:39:03 :: Using wireless interface...eth1
2009/08/15 15:39:03 :: Using wired interface...eth0
2009/08/15 15:39:10 :: Autoconnecting...
2009/08/15 15:39:13 :: Attempting to autoconnect with wired interface...
2009/08/15 15:39:13 :: Putting interface down
2009/08/15 15:39:13 :: Releasing DHCP leases...
2009/08/15 15:39:13 :: Setting false IP...
2009/08/15 15:39:13 :: Flushing the routing table...
2009/08/15 15:39:13 :: Putting interface up...
2009/08/15 15:39:13 :: Running DHCP
2009/08/15 15:39:13 :: dhcpcd: version 5.0.6 starting
2009/08/15 15:39:13 ::
2009/08/15 15:39:13 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 15:39:13 ::
2009/08/15 15:39:23 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 15:39:23 ::
2009/08/15 15:39:43 :: dhcpcd: timed out
2009/08/15 15:39:43 ::
2009/08/15 15:39:43 :: DHCP connection failed
2009/08/15 15:39:43 :: exiting connection thread
2009/08/15 15:39:45 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 15:39:45 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 15:39:45 :: Sending connection attempt result dhcp_failed
2009/08/15 15:41:46 :: Daemon going down, killing wicd-monitor...
2009/08/15 15:41:46 :: Removing PID file...
2009/08/15 15:41:46 :: Shutting down...
2009/08/15 15:42:33 :: ---------------------------
2009/08/15 15:42:33 :: wicd initializing...
2009/08/15 15:42:33 :: ---------------------------
2009/08/15 15:42:33 :: wicd is version 1.6.2 436
2009/08/15 15:42:33 :: setting backend to external
2009/08/15 15:42:33 :: trying to load backend external
2009/08/15 15:42:33 :: successfully loaded backend external
2009/08/15 15:42:33 :: trying to load backend external
2009/08/15 15:42:33 :: successfully loaded backend external
2009/08/15 15:42:33 :: Automatically detected wireless interface eth0
2009/08/15 15:42:33 :: setting wireless interface eth1
2009/08/15 15:42:33 :: automatically detected wired interface eth1
2009/08/15 15:42:33 :: setting wired interface eth0
2009/08/15 15:42:33 :: setting wpa driver wext
2009/08/15 15:42:33 :: setting use global dns to False
2009/08/15 15:42:33 :: setting global dns
2009/08/15 15:42:33 :: global dns servers are None None None
2009/08/15 15:42:33 :: domain is None
2009/08/15 15:42:33 :: search domain is None
2009/08/15 15:42:33 :: setting automatically reconnect when connection drops True
2009/08/15 15:42:33 :: Setting dhcp client to 0
2009/08/15 15:42:33 :: Wireless configuration file found...
2009/08/15 15:42:33 :: Wired configuration file found...
2009/08/15 15:42:33 :: chmoding configuration files 0600...
2009/08/15 15:42:33 :: chowning configuration files root:root...
2009/08/15 15:42:33 :: Using wireless interface...eth1
2009/08/15 15:42:33 :: Using wired interface...eth0
2009/08/15 15:42:39 :: Autoconnecting...
2009/08/15 15:42:42 :: Attempting to autoconnect with wired interface...
2009/08/15 15:42:42 :: Putting interface down
2009/08/15 15:42:42 :: Releasing DHCP leases...
2009/08/15 15:42:42 :: Setting false IP...
2009/08/15 15:42:42 :: Flushing the routing table...
2009/08/15 15:42:42 :: Putting interface up...
2009/08/15 15:42:42 :: Running DHCP
2009/08/15 15:42:42 :: dhcpcd: version 5.0.6 starting
2009/08/15 15:42:42 ::
2009/08/15 15:42:42 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 15:42:42 ::
2009/08/15 15:42:52 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 15:42:52 ::
2009/08/15 15:43:12 :: dhcpcd: timed out
2009/08/15 15:43:12 ::
2009/08/15 15:43:12 :: DHCP connection failed
2009/08/15 15:43:12 :: exiting connection thread
2009/08/15 15:43:14 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 15:43:14 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 15:43:14 :: Sending connection attempt result dhcp_failed
2009/08/15 15:44:27 :: Daemon going down, killing wicd-monitor...
2009/08/15 15:44:27 :: Removing PID file...
2009/08/15 15:44:27 :: Shutting down...
2009/08/15 15:44:48 :: ---------------------------
2009/08/15 15:44:48 :: wicd initializing...
2009/08/15 15:44:48 :: ---------------------------
2009/08/15 15:44:48 :: wicd is version 1.6.2 436
2009/08/15 15:44:48 :: setting backend to external
2009/08/15 15:44:48 :: trying to load backend external
2009/08/15 15:44:48 :: successfully loaded backend external
2009/08/15 15:44:48 :: trying to load backend external
2009/08/15 15:44:48 :: successfully loaded backend external
2009/08/15 15:44:48 :: Automatically detected wireless interface eth0
2009/08/15 15:44:48 :: setting wireless interface eth1
2009/08/15 15:44:48 :: automatically detected wired interface eth1
2009/08/15 15:44:48 :: setting wired interface eth0
2009/08/15 15:44:48 :: setting wpa driver wext
2009/08/15 15:44:48 :: setting use global dns to False
2009/08/15 15:44:48 :: setting global dns
2009/08/15 15:44:48 :: global dns servers are None None None
2009/08/15 15:44:48 :: domain is None
2009/08/15 15:44:48 :: search domain is None
2009/08/15 15:44:48 :: setting automatically reconnect when connection drops True
2009/08/15 15:44:48 :: Setting dhcp client to 0
2009/08/15 15:44:48 :: Wireless configuration file found...
2009/08/15 15:44:48 :: Wired configuration file found...
2009/08/15 15:44:48 :: chmoding configuration files 0600...
2009/08/15 15:44:48 :: chowning configuration files root:root...
2009/08/15 15:44:48 :: Using wireless interface...eth1
2009/08/15 15:44:48 :: Using wired interface...eth0
2009/08/15 15:44:58 :: trying to load backend ioctl
2009/08/15 15:44:58 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
2009/08/15 15:44:58 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
2009/08/15 15:44:58 :: trying to load backend external
2009/08/15 15:45:57 :: Autoconnecting...
2009/08/15 15:45:57 :: Putting interface down
2009/08/15 15:45:57 :: Attempting to autoconnect with wired interface...
2009/08/15 15:45:57 :: Releasing DHCP leases...
2009/08/15 15:45:57 :: Setting false IP...
2009/08/15 15:45:57 :: Flushing the routing table...
2009/08/15 15:45:57 :: Putting interface up...
2009/08/15 15:45:57 :: Running DHCP
2009/08/15 15:45:57 :: dhcpcd: version 5.0.6 starting
2009/08/15 15:45:57 ::
2009/08/15 15:45:57 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 15:45:57 ::
2009/08/15 15:46:07 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 15:46:07 ::
2009/08/15 15:46:27 :: dhcpcd: timed out
2009/08/15 15:46:27 ::
2009/08/15 15:46:27 :: DHCP connection failed
2009/08/15 15:46:27 :: exiting connection thread
2009/08/15 15:46:29 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 15:46:29 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 15:46:29 :: Sending connection attempt result dhcp_failed

Was able to boot this weekend and did an update which updated the kernel. Rebooted and there was no network. Rebooted again and no network... rebooted again and... had network!? I tried changing wicd to use dhclient only and did the triple reboot test again and it didn't change anything... randomly working network... same with dhcpcd.
So it appears to be a dhcp timeout issue however it makes no sense because before the update a couple weeks ago it was working every time with no hiccup. Am I not providing enough information that will aid in anyone helping me figure this out?

Safari and wireless don't work unless I am connected to wireless

safari and my wireless don`t work together, unless the macbook is connected to the wireless

Take your MacBook to another location where wireless networks are available - a coffee house or public building - and see if it finds wireless networks when it starts up. If so, the problem might be with your router at home. If not, you might check System Preferences > Network and see if Airport is operating/on.
If by "connected" you mean via ethernet cable, there are a couple things to try: Take a look at your wireless router's settings (router's manual will have instructions for accessing settings) and see what security features are on/off.

How to set up WRT54GS so the wired and wireless connections both work?

I have a DSL line in to a Motorola modem.
The modem is connected to the WRT54GS with an ethernet cable.
When I connect my computers directly into the WRT54GS with an ethernet cable (there are four connection spots at the back of the box), I cannot go to the internet. I have 3 computers plugged in, but none of them connect via Ethernet..
Is there a setting on the router so that I can use the router for both wired and wireless connectivity?
Added info: I tried to connect directly from the computer to the modem, but again, got no connectivity. When I "chatted" with ATT, they told me the modem is set to "bridge", and that I could connect only one device. I don't want to change this setting because I want to use the router for the wireless capability. Besides which, I have more than one computer to connect to the internet.
How come I cannot just plug in and go?
My firmware version is v2.07.1.
I don't know how to find out what hardware version I have.
Other info is "DirectEthernet Connection, Speed: 100.0 Mbps, Signal Strength: Excellent, Status: Connected"
Also "1394 Connection 3, Speed: 400.0 Mbps, Status: Connected"
I don't know what that's for, but thought it might prove useful to those of you who are knowledgeable about such things.
Wireless is ok, but if I'm sitting right next to the router, I'd like to connect with Ethernet and take advantage of the better speed, etc.
Thanks in advance.

Just click this link.

I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
To perform the Factory Default Reset on the Time Capsule....
Pull the power cord from the back of the device
Wait a few moments
Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
On your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue
Follow the guided setup and choose the "join" option when it appears duriing the setup
You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

Sound, USB Ports, and Wireless don't work.

I installed Windows XP on my MacBook, but when I switch to Windows the sound doesn't work, the USB ports don't read my flash drives, and the built in wireless don't work. I can't connect to the internet to download drivers, if they're needed. Can anyone tell me what to do?

the drivers are on the DVD that came with your computer.

WRT610N Wired Connection Not Working; Wireless is Fine

We've had our WRT610N router for about a year, and we've been able to connect via wired and wireless connections without any problem. As of last night, the wired connections are no longer working. We unplugged the cable modem and router numerous times to try and get it to work, but the wired connection is still out.
One item of note, we had a lightning strike a tree in our backyard late yesterday afternoon. I'm not sure how this could possibly have any bearing, but I thought I would mention it.

I've heard a lot of that story, thunderstorms ruining the router configuration. I'd suggest you reset the router to defaults and give it a try. Though it would also reset the settings you have set in there.

Wireless devices keep dropping, Wired works 24/7

Hi,
We have had bt infinity in our home for a few months now, and only in the past few weeks we have been having constant problems with wireless devices. We have one computer wired, one wireless and a few other devices such as tablets phones etc. The connection on all the wireless devices keeps dropping with no response, while the wired one is still working perfectly. The problem is becoming more frequent than ever, I spoke to tech support at BT who told me to log onto my router and change the channel to 11 but since then, zero improvements.
When i troubleshooted the internet connection problem on the wireless pc, i got the message
" internet connection doesnt have a valid ip configuration"
Can anyone help? or is my hub giving up the ghost?
Thanks!

There is some help on this page.
Wireless connection problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems with hp laser printing in leopard- wired and wireless

Printing problems in Leopard are slowly eating away at my last nerve!
Here's the background: I have a Macbook Pro 2.33GHz Core 2 Duo, 4GB ram, running 10.5.2. Ever since I upgraded to Leopard, I've been having printing problems, both wired and wireless. I have an HP Laserjet 1160, which is a wonderfully reliable printer- I've had it since 2005 and have never had a problem.
When I installed Leopard, I began getting a popup message after starting up my computer and logging in. The message has a lighthouse icon on it and reads:
"Popup Error: Failed to listen for incoming Popup jobs. You will not be able to use Popup printing for the duration of this session. Please report this incident to a system administrator."
(for the record, I only have one computer, it's not on any system, and I have the administrator account)
Here are the two problems I have:
-First, wired printing is spotty. Half of the time, when I connect the USB cable and click print, nothing prints. Usually, if I unplug the cable and plug it into the other USB port, then printing works. This is in spite of the fact that the computer recognizes that the printer is there- I can delete then re-add the printer to my printer list and still nothing.
-Second, wireless printing does not work at all. Again, the printer is recognized when plugged in to either the time capsule or the airport express, and I can add the printer, but printing doesn't work: the job is sent to the print queue, but the queue stalls on the "connecting to printer" phase.
This problem is a huge pain, and I have no idea how to solve it. Any help is appreciated.
Jon

Thanks for posting this problem Cathjock. I have had the same issue with a NEC Superscript 1400. Thinking it wast he printer, which is getting up there in age, I went out and purchased a new HP P1505 to no avail. I have been researching this for a few days now and think that all of this is related to a user permission in CUPS. I have de-installed, re-installed, re-booted etc as prescribed and got three pages hours after the fact via my Airport Express connected new printer. Generally, however, nothing comes out immediately as was the case in the past either on Airport Express or via USB cable. I am stumped and am starting to get worried.
I can't print invoices for my business and am considering firing up my old Windows machine if you can believe it !
Seriously, Apple has created a monstrous situation with all of htese printing issues and nothing is apparently being done, nothing that I can find in any of the discussion forums at this time.
My last option is to re-install 10.5 with an archive and install as I really cannot afford to start from scratch.
Now if you look at this forum, there are 242,847 views logged with 2,514 questions and 13,848 messages.
This should mean something for Apple as many people need help and are getting really really ******-off.
So pleeeeaaaaase Apple. respond and offer a fix for this problem that is plaguing a ton of people.
Chris

File sharing -- wired vs. wireless

Hi all!
I have having odd behavior with a WRT54G router (v5). I have set up Windows XP file/print sharing over NetBEUI (TCP/IP sharing is disabled). It works fine when all devices are plugged into the router. When I unplug my laptop and use the wireless, it can't see the other machines nor be seen by them. All other communication works fine.
AP Isolation is OFF on the router. Is there some other feature that would block NetBEUI between the wired and wireless sides? I had a v3.1 router until about 3 weeks ago and all of the sharing worked fine...
Thanks!
/gary kessler

Hi.
Thanks for the replies....
My experience has been that NetBEUI works fine over a WLAN; in fact, it worked on my v3.1 router. (And I can't think of any reason that it wouldn't work over any kind of broadcast LAN as long as there was no routing...)
I don't use TCP/IP because I don't want sharing enabled over the Internet. I use NetBEUI at home and don't want to worry about sharing accidently getting routed somewhere and I don't want to have to reconfigure my system everytime I leave home and jack into a foreign network, e.g., work (which I do frequently).
Both wired and wireless adapters are set for NetBEUI, sharing is bound to NetBEUI (and unbound from TCP/IP), and firewalls were off on all computers for testing.... although, if the wired sharing worked there's no reason that the wireless shouldn't because the other computers don't know how I am accessing the router!
This is what makes me think that there's something in the router that is blocking the traffic from the wireless side to the wired ports...
I have uninstalled NetBEUI from the laptop, including removing the registry keys, then reinstalled.... still, sharing works fine when I am plugged into the router but fails when I use wireless.....
Thanks again...
/kess

NAC Guest server for wired and wireless

Hi
My customer wants the NGS to install for both wired and wireless users. For wireless users we can integrate it with the WLC but i don't know how it will work for wired users at the same time. Pls suggest.
Thanks

Hi Vishal,
Please note that if you want to return ACLs (and usually in wired web auth you need to), you will have to integrate with ACS as NGS itself cannot return ACLs in the reply radius attributes.
Basically the process is as follows:
1 - Client plugs cable on switch.
2 - Web auth is triggered on the port.
3 - default ACL permiting only DNS and DHCP is applyed so that the client PC can obtain IP address and open a browser.
4 - Client will be redirected to the NGS hotspot login page.
5 - Client will enter credentials.
6 - Client broswer will send an HTTP POST packet containing the credentials.
7 - The switch will intercept the POS packets and retrieve the credentials entered.
8 - The switch will send Radius Access-Request to the ACS.
9 - The ACS will use the NGS as External Identity source to authenticate the client.
10 - The NGS will reply with Radius Access-Accept to the ACS and the ACS will reply to the switch including the ACL in the Access-Accept.
11 - the Switch authorizes the client on the port and applies the ACL it received from the ACS.
Please follow the document Nicolas posted as it is a good one.
HTH,
Thanks

Brand new iMac does not work wirelessly

This is a very strange situation and I don't know how much to be concerned about it.
6 weeks ago I bought the first of two brand new iMacs. We have two old G4s both wired into a Netgear wireless router, plus the printer. The first new iMac when switched on, immediately found the Netgear and has worked perfectly, wirelessly, ever since. As it should.
Less than a week ago I bought the second new iMac, which is identical to the first. I put it on the _same desk_ as the Netgear, therefore a distance of only one foot. Straight out of the box, it worked wirelessly to register itself with Apple.
Since then, it has only worked wirelessly very intermittently, and then very slowly indeed. I was wasting far too much time trying to figure out why the wireless did not work, and eventually wired it into the router too.
I was attempting to set up a network with 2 old G4s wired in, and 2 new iMacs wireless. Now I have 3 wired in and one wireless.
Is there something wrong with the second brand new iMac? Or is there some line I should be pursuing with Netgear?
I have written all the IP addresses down in case anyone responding - and I sure hope SOMEONE responds! - thinks that this may be a clue.
Many thanks in advance to all and any replies.

Update: I'm posting this in case it helps others......
I phoned the software support which comes free for 90 days with a brand new iMac.
The bright young man there instantly knew what the problem was, because he'd seen it all before. There's nothing wrong with the iMac and it has nothing to do with IP addresses.
I have to go into the Netgear configuration screen and Enable MAC filtering. This means I'll give the router the hardware addresses of the two iMacs and it will then allow both of them to communicate wirelessly - but no other devices which might be lurking in the vicinity.
Sounds good to me.

I have two airport extremes, one acting as amodem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable. How do I know if they are operating wired or wirelessly

I have two airport extremes, one acting as a modem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly? I want to know as I assume I will get much better speeds if they are wired.

Hi Bob, many thanks for the prompt response. I think I did what you suggested, but you're the expert so I have sent over a few screenshots. The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time). My new home office is going to be in the garden, circa 100 feet from the main house. I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily. Everything works well, so I was surprised when I unplugged the ethernet, that it still worked. I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly.
Many
Thanks, Greg.

Wired works, wireless don't

Similar Messages

Maybe you are looking for