Wirelees LAN adapter for samsung TV

How can i get my Airport to see my LAN adapter?

The TV is wirelessly connected right now, correct? Are you setting up your TV using a static IP?
I’d suggest leaving all the network settings at auto, so that it picks up everything from the router, unless there’s a particular reason that you need to set it up with a fixed IP.
Would you happen to know the IP address of your router?
If you don’t, you can find it by checking the router information under Router Settings in the Cisco Connect software.
If you post that information, I can tell you what information you would need to put in for the static IP.
Also, the TV would ask you for the wireless network password, which is again something you can get from Cisco Connect.

Similar Messages

[SOLVED] Driver for my USB Wireless LAN Adapter

I have a USB Wireless LAN Adapter for my desktop so I can share the network at home with others，but I found that I can only use my USB Wireless LAN Adapter in install environment. The driver for USB Wireless LAN Adapter just disappear after installation，the operating system could only identify the device but could not drive it.
Are there some packages not install for this problem or some configuration of the system is wrong?
thanks
Last edited by mihail (2012-07-10 01:42:06)

have you searched the forums? There are a bunch of threads on the ath9k module not working correctly with the latest kernel.
That's why it works in the live cd environment but stops working once you update and login to your actual installation.

Wireless lan adapter

do i need a wireless lan adapter for my tv to connect with wireless router?

Yes, if it doesn't have wireless built in. Provide the model number of the TV if you wish specifics.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Samsung wireless LAN adapter

My Samsung BD-P1590 DVD player calls for a Samsung wis09abgn LAN adapter but Best Buy does not carry these. Will a Samsung wis12abgn work on this DVD player instead?

Yes, according to Samsung.

HT4381 is there any way to find an adapter for apple tv and Samsung tv with wise link?

Where can I find an adapter for my apple tv and Samsung TV with only a wise link input?

Welcome to the Apple Community.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

Hp netserver 10 100tx pci lan adapter driver for windows 7

Hello,
I bought a new notebook HP Pavilion 15-e036sc with windiws 8 (64bit). I uninstalled this windows version and I installed windows 7 (64bit) with servis pack 1, but I can´t connect to internet, because windows haven´t driver for net adapter (hp netserver 10/100tx pci lan adapter). Where is download the driver for my net adapter for windows 7?
Thanks!
Pavel

Hi pajyn, welcome to the HP Forums. It doesn't appear as though HP offers Windows 7 drivers for your notebook.
HP Pavilion 15-e036sc Notebook PC Drivers
You will have to determine which network module is installed, and find the drivers from the manufacturer, if they exist.
These instructions might help you get the PID and VID keys. Avoid any downloads from this site as I have not verified their integrity. How to Identify Unknown Devices in Windows
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Software downloads for Aironet 350 Wireless LAN Adapter

Where can I get the software to install the Aironet 350 Wireless LAN Adapter? Will it have a client manager? I think that's what the software is to switch settings as you change locations.Model: AIR-PCM352

Hi,
You can download the software from the below link using your CCO login:-
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875243
Cisco Aironet Wireless LAN Client Adapters
Cisco Aironet 340 Wireless PC Card Adapter
Cisco Aironet 340 Wireless PCI/LMC Adapter
Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter
Cisco Aironet 350 Wireless LAN Client Adapter
Cisco Aironet 5 GHz 54 Mbps Wireless LAN Client Adapter (CB20A)
Cisco Aironet 802.11a/b/g CardBus Wireless LAN Client Adapter (CB21AG)
Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter (PI21AG)
Plz rate if this help.
Regards
Inayath Shariff

Using My N73's Bluetooth connection as adapter for...

Hey guys,
This is not a question that can be put into one sentence...
I shall put it as short and descriptive as possible.
I can connect my laptop to the internet using the Built-in Modem I have in my laptop (Dial-Up).
My brothers laptop is new, He does not have a Modem built in and I do not have any other hardware here.
I was thinking, Is it possible to Have the following setup
Dial-Up -> Laptops Modem -> N73's Bluetooth connection -> Brothers Bluetooth connection (on his laptop) -> Internet.
So actualy making a Networking Bridge from My Laptops Modem to the Bluetooth of my N73.
(I could maybe buy a Lan Cable somewhere here and make a Networking Bridge between the Modem and the Lan port, but only if this is not possible whatsoever.)
Thanks In Advance...

This has been a while, and I am back home now.
What I ment is what I said, I never mentioned my laptop having a Bluetooth connection nor using my telephone as a modem. I said that I wanted to use my Laptop as Modem and my brothers laptop as the client connection through bluetooth to my telephone wich in his way would be just a bluetooth adapter for my laptop. Now I figured that out myself and I had Dial-Up Internet on both laptops.
Since It worked I am going to ask another question hoping that you guys will just say I don't know instead of It's not possible.
How do I configure my N73 to become my laptops Bluetooth Adapter so I can connect any bluetooth device to my laptop.
(saves me 20 euros, but that is not the point)

ThinkPad 2nd HDD Adapter for T40 -do I need to configure the hard drive?

I purchased a new Samsung HM160HC hard drive and a Thinkpad 2nd HDD adapter for Ultrabay slim for a Thinkpad T40. When I install the PATA hard drive into the adapter do I need to configure the hard drive as slave, cable select, or leave as master? Any help would be appreciated.

Reformat usiing the original install disc then update to v10.6.8.
Mac OS X 10.6: Reinstalling Mac OS X

Internal LAN adapter configuration commands

Could anyone describe me the meaning of hsma
command option:
7206MEDA(cfg-lan-Token 0)#adapter 1 4000.0047.4522
7206MEDA(cfg-adap-Token 0-1)#?
Internal Lan Adapter configuration commands:
hsma Hot Standby MAC Address parameters
Thanks in advance for any information

Hi,
I have attached a document describing what hsma is all about in more detail, including sample configurations.
In very simple words. It is a mechanism, a little bit like hsrp, to allow to cip's to backup each other. You configure a virtual adapter which is always only active on one of the two cip's and they monitor each other. If one cip goes down, the other one takes over and activates the virtual adapter.
When the two cip routers were connected to a tokenring infrastructure than the redundancy whas achived by using the same mac address on the cip's reachable over to different source bridged path using different rif's.
If you connect the two cip routers via a ethernet than there is no rif field in your packets anymore, you can not do source bridging. Additional the cam table of a ethernet switch can not deal with two times the same mac address on different ports in the same vlan.
Hsma allows for a similar level of redundancy if your cip routers are connected via a ethernet backbone.
thanks...
Matthias

LAN adapter failed the media test

Hello
I don`t have a Toshiba notebook but have problem. When I started my computer I saw this following
Novell Netware ready firmware v.1.00 (940810) (c) Copyright 1991-1994 Novell inc. All Rights Reserved Intel Ether Express (TM) Pro /100 LAN adapter.
LAN adapter failed the media test
Please check the cable and reboot the system.
Exiting the RPL Loader
Operating system not found
My hard disk is detected by the Bios but when i tried to install an operating system "WXP Pro" from a Bootable CD, the installation didn't start.
Here i described how the page looked like so can anyone help me!!!

Hi Adam,
Firstly, check that you BIOS is set to boot from the correct devices (normally FDD - HDD - CD-ROM - LAN). The error that you are getting indicates that the BIOS has tried to boot from the LAN which would normally mean that the HDD has no useable operating system installed or that the MBR is corrupt.
If you can boot from the Windows XP installation CD but cannot then install the system to your hard drive, then it is likely that your hard drive itself is faulty and will need to be replaced. Try to boot from the windows CD and start the recovery console so that you can check the hard drive for errors.
regards,

[svn] 2169: Add a new proxy adapter for code coverage.

Revision: 2169
Author: [email protected]
Date: 2008-06-20 12:53:04 -0700 (Fri, 20 Jun 2008)
Log Message:
Add a new proxy adapter for code coverage.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/proxy-config.mods.xml

Hello,
I have not used a ThinkPad X1 Carbon (Type 3444-F9U) myself, but here is the configuration of the machine as it originally shipped:
i7-3667U(3.2GHz), 8GB RAM, 180GB Solid State Drive, 14in 1600x900 LCD, Intel HD Graphics, 1Gb Ethernet, UltraNav, Secure Chip, 4c Li-Ion, Win7 Pro 64
According to the Detailed Specifications page for this model, the unit shipped with an Intel Centrino® Advanced-N 6205S, 2×2 wireless card, and from looking the Drivers and Software page, it uses a USB 2.0 Ethernet adapter.
Here are the various drivers for Windows 7 (x86) that I was able to locate for this model:
Intel Chipset Support Software v9.2.0.1021
ThinkPad Bluetooth with EDR Software v6.5.1.4500
Lenovo USB 2.0 Ethernet Adapter Software v5.12.9
Intel Wireless LAN Driver Software v17.0.5
I would suggest starting with the Intel Chipset software first. The order of the ofther software packages should not make much difference.
Also, make sure the Wireless Radio Swich located on the Left Side of the ThinkPad X1 Carbon is enabled before installing the Bluetooth and WLAN drivers.
One thing you might want to keep in mind is that with a 32-bit version of Windows, the operating system will only provide access to between ~3.2 and 3.5GB of the installed 8GB of RAM. With the 64-bit version of Windows 7 that came with the unit, you will have access to the full 8GB.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lan messenger for Solaris 10 for Sparc server

Hi
Is there any Lan messenger for Solaris 10 for Sparc which can be run on Thin client using sunray 3.1.
Clients need to use messenger using their thin clients.
help in this regard will be highly appreciated
Regards
Thanks

is there a client for YM phone on Solaris??
I use Yahoo phone as my only phone and Win XP somehow refuses to work even after 4 re-installations and does not even show my network adapter. So, if I can find sth to work with Yahoo phone Solaris will be the only OS I need.
BTW the nge0 works fine on Solaris and I am posting this from opensolaris.
thanks everybody.

Client Adapter for Access table connection

Were is possible to get just the portion of Oracle Open Client Adapter for ODBC V 6.0.5.35 that enable to establishe a connection with Access table?

Cisco broadens WLAN offerings
By John Cox
Network World Fusion, 11/12/03
Cisco Wednesday will announce a series of products and product
improvements to bolster its wireless LAN offerings, including
additional software that shifts WLAN features into other parts
of the corporate net.
The announcement will include, according to a source familiar
with Cisco's plans:
* Cisco's first 54M bit/sec 802.11g radios for its access
points.
* A new client adapter card that can work with 802.11a, 11b, or
11g access points.
* A new version of its IOS network operating system, adapted for
the model 1100 and 1200 access points.
* A new software version for the CiscoWorks Wireless LAN
Solutions Engine, which is a server for administering access
points.
Last June, Cisco unveiled a WLAN strategy called Structured
Wireless-Aware Network (SWAN). The idea behind SWAN is to
distribute WLAN functions to various devices in the net, as
appropriate. Cisco officials say some functions are best done on
access points, and the adaptation of IOS for these devices makes
them highly programmable, and visible to other Cisco network
resources, such as network management and network security
products.
Other functions have been shifted to the Wireless LAN Solutions
Engine (WLSE or "willsee" to insiders). Still others will be
shifted gradually to Cisco's wireline switches and routers, as
IOS is updated. The first release of "wireless aware" IOS will
be sometime in 2004, Cisco said.
For the full story, please go to:
<http://www.nwfusion.com/news/2003/1112ciswlan.html?nl>

Satellite U940-d4m - LAN driver for Windows 7 needed

Hello! I install win 7x64 on my 940-d4m laptop ( psu6sr-01m010ru ), but i cant find driver for my lan adapter. On download page only windows 8 drivers and they didnt work. Where i can find this driver?
I wish you can help me with this problem, thanks.

ok i found this driver, thx for help.

Wirelees LAN adapter for samsung TV

Similar Messages

Maybe you are looking for