Wireless 1TB Plus used for backup?

Could a Seagate Wireless Plus 1TB Storage/Buildin Wi-Fi Streaming unit be used for backup in Time Machine, or do I have to use a USB connection?

The first requirement would be that the drive is formatted in Mac OS Extended (Journaled). If not, the next question for Seagate support would be.....can it be formatted in Mac OS Extended (Journaled)?.
If yes.....in theory.....it would work, but backups will be mighty S L O W this way due to a "double hop" wireless situation.
In other words, your Mac would have to send the signal to the wireless router......hop one.....and then the wireless router would have to send the signal back out to the Seagate......hop two.
In addition to doubling the amount of time that it would take for backups to occur, the chances of an error are doubled as well.

Similar Messages

Can I restore my info to a new iPhone 6 plus using a backup of an iPhone 4s running iOS 7.1.2?

Just bought a new phone and want to import all my app settings and information. I have heard all the complaints about iPhone 4s running iOS 8 and don't want to update until I have it preinstalled on a new 6+.
Can I restore my info to a new iPhone 6 plus using a backup of an iPhone 4s running iOS 7.1.2?
or would I have to upgrade my 4S to iOS 8, backup, and then restore the new phone. I need to ensure that my 4S powers on and works so I can receive trade in credit for it (~$200), so this is worth a bit to ensure that my 4S stays functional.
Thanks

You can load a backup from an earlier iOS version onto a device with a later iOS version, but not the other way around.
If you're going to do this, I'd recommend doing a backup of your 4s to your computer (not iCloud) and load the backup onto the 6+ from the computer. You can try an iCloud backup/installation, but also do a local backup in case something goes wrong. A local backup is more comprehensive than an iCloud backup, and in my experience it loads more reliably.

HT3275 This file 'Volumes/Data/iMac van Bruno Heutz.sparsebundle' which is used for backup copie is already in use. What do I have to do?.

Every 30 min I get this message from Time Machine.
This file 'Volumes/Data/iMac van Bruno Heutz.sparsebundle' which is used for backup copie is already in use.
What do I have to do?.
Kind regards,
Bruno

Restart the TC..
But yours might be more serious than that.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
I would suggest you change all names to match what Pondini writes here.
C9
And use ethernet not wireless.

What can I do? I've forgotten my password and dont remember the answers to my sercurity questions, and no longer have access to the email account i used for backup. How do I get my icloud password reset?

What can I do? I've forgotten my password and dont remember the answers to my sercurity questions, and no longer have access to the email account i used for backup. How do I get my icloud password reset? Please help. Thanks in advance.

Please see Kappy's User Tip here:
https://discussions.apple.com/docs/DOC-4551

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup. Its been several months and now when i try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I a

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.
Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
Thnaks, for anyones ideas on how I can get this working again.....

First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme).
Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external.

After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC:    Enabled
DIMM Riser B/DIMM 1:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser B/DIMM 2:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser A/DIMM 1:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x42076007
DIMM Riser A/DIMM 2:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x4207631E
DIMM Riser B/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser B/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty

What thrid party tools are you using for backup compression?

I have a few SQL Server 2008 standard edition instances and I'm curious to what third party tools people are using for backup compression. I know upgrading to enterprise edition or SQL Server 2008R2 or above will give me that compression but I do not
have that option right now. I'm familiar with Idera, Red gate and Litespeed and I just want to know what else is out there.
Thank you in Advance.

There are many third party tools.
But Why third party tools?
SQL Server integrated Backup and restore feature is complete. For more info please see these links:
Backup Overview (SQL Server)
Introduction to Backup and Restore Strategies in SQL Server
SQL
Server Backup Best Practices
sqldevelop.wordpress.com

Can Time Capsule be used for Backup of Iphone

Can Airport Time Capsule be used for Backup of Iphone & ipad

The iPhone and iPad cannot back up directly to the Time Capsule.....they only back up to iTunes on your Mac or PC....or....to iCloud.
If you are using Time Machine to backup your Mac to the Time Capsule, then all of the backups of your iOS devices in iTunes will then be backed up to the Time Capsule.
See this Apple support document for more information on iOS backups.
http://support.apple.com/kb/ht1766

Application to use for backup

Hi,
I am using MBP with Snow Leopard, and I have this 500G external drive as my backup (Sometime use on windows to open backup files from mac).
My question is , is there a program / application to use for backup? I tried backing up, but the folder on my target drive (500gb ext), was replaced with the folder on my mbp.
Scenario:
on MBP - I have folder Documents
on 500ext drive - I have folder Documents
When I copy the entire Documents folder from MBP to 500G Ext Drive, the one in 500G was replaced with the one in MBP. I dont want that to happen because sometimes I have files on 500g documents that doesn't exists on MBP Docs. I just want to COPY folders on either way and will retain files even not exists. Which means, I need a file manager that copy files to files not folder to folder.
As much as possible, I want a free apps.
Thanks

Use the ditto command in the Terminal, which is in the /Applications/Utilities/ folder; for instructions on its use, enter 'man ditto' without the quote marks into the Terminal prompt.
(55711)

What to use for backup?

To back up my mac computer, do I need to purchase a product such as time capsule, or do i just use a blank CD, or what? I would like to back up my mac, but i don't know what to use.
Message was edited by: Mr Macintosh

Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Intego Personal Backup (Commercial)
9. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete FireWire drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

10g Physical Standby to be used for Backup through RMAN

Dear All,
I have 10g Database Primary and Standby Server which is operating in Maximum Performance Mode. I want to use Standby Database for performing Weekly Full and Daily Incremental Backups through RMAN. Kindly inform me is it possible, if yes how should I configure it. I will also be using Compression and Encryption while performing backups.
Best Regards,
Asif

Yes, that is possible.
Because the standby databases are in mount mode, they can be accessed through the SYS account .
I use the following RMAN script for the same purpose. Please note that we have configure the flashback area, so we are not letting RMAN delete the archive files:
run {
sql 'alter system archive log current';
sql 'alter system archive log current';
allocate channel ch1 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
backup
incremental level 0
tag full_bk_db_webshop
format 'df_%d_t%t_s%s_p%p'
(database include current controlfile);
backup archivelog all;
This script is for a FULL backup ( level 0 ). You could also use the "backup full" command
You can easily change the level of the Backup for incremental purposes.
Starting RMAN - if configured correctly - is the same as with an open database
export ORACLE_SID=<STDBYSID>
rman target / rcvcat <rman/rman>@<catalogsid>
the user for, and the catalogsid are merely examples
Edited by: fjfranken on Mar 24, 2009 4:07 AM

Unable to install Mountain Lion because HD is "being used for backups"?

I have been unable to install mountain lion because it is saying that my hard drive is being used for time machine backups. That makes no sense, because I use an external hard drive to backup my computer. I'm not sure why this is happening.

Do you, for some reason, have an item named "Backups.backupdb" on your hard drive? If so, you need to get rid of that in order to install.

What to use for backups? Should I clone the drive?

I have a 100Gb hard drive and would like to know what software i should use to backup/clone. I'm still relatively new to Macs and the idea of a cloned drive isn't as feasible in the PC world. I ordered an external drive (250Gb) and will use part of it for my Mac (Can I use half for my Powerbook and half for my PC laptop?). The external drive will have firewire.
My main concern is backups with the ability to boot as an added feature. What plan should I use? I have no problem cloning the whole drive once or twice a month. Should I buy Carbon Copy, Super Duper or Deja vu? Is there something better out there? HELP!

The main fear I was referring to about the drive partitioning was the possibility of drive failure, which might lose data on both partitions. Whilst loss is a relatively unlikely event, the whole idea of backing up is to give you the re-assurance that your data is safe when that 'unlikely' event happens (which it probably will when you least expect or want it to). Over the years I have learned the hard way that backups should be treated in the most safest and most conservative manner - no shortcuts. That said, the event you described is very unlikely.
You can erase and partition the drive whilst booted into OS X normally, using Disk Utility. Obviously the PC partition needs to be formatted for MS-DOS. Once erased and properly partitioned, the drive will be ready for cloning. There's no need to repeat the erase/partitioning process in the future - unless there's a problem. These tasks do not need to be performed in safe mode.
15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4, Mac OS X (10.4.6) Cube, 2xTAMs, iPods 2G/4G, iPs, AEBS, AX

Icloud control panel disables photostream when itunes used for backup?

So thanks to this issue (https://discussions.apple.com/thread/4782118), I decided simply to use iTunes to manually backup once a day until my 90 days has "reset" (see that thread to see what I'm referring to).
However, it would appear that the iCloud control panel will no longer sync up with my photostream - is this just a coincidence or is that the norm once you choose to use iTunes for backup within iTunes, instead of iCloud? Photostream is now greyed out in the control panel...

In order to get mine working in the same situation, I had to delete both the iCloud data file and the [email protected] e-mail account. Once that was accomplished, I was able to get the iCloud installer to close Outlook and install itself correctly. Trying to recreate the accounts again from within Outlook was not the solution and resulted in this error.

Dbconsole: anyone using for backup?

Is anyone using dbconsole for backups? I'm used to creating rman scripts and running those scripts using a cronjob or legato/veritas software. When dbconsole is up and running, it is generating a lot of archivelogs, so theres a space issue.

What you asked is a little confusing.
Yes, use dbconsole to generate rman scripts is a good idea if you are not familiar with the syntax.
dbconsole is part of Oracle Enterprise Manager, it shouldn't generate a lot of archive logs. Maybe you can elaborate the problem you are facing so we can help you to troubleshoot.
What's your Oracle version, OS etc..

Wireless 1TB Plus used for backup?

Similar Messages

Maybe you are looking for