Wireless 5508 HA mode, urgent question! Many thanks

Hi, experts,
our company has order two WLC 5508 and want to deploy as HA mode.
one is air5508-12-k9, another is air5508-HA-k9.
however, due to proper installation, someone has installed license into HA model, right now, two WLCs are both primary.
When I wanted to convert WLC back to HA by using"config redundancy secondary" command, it displays I need minimal AP licenses to convert it.
My question is
1. is there any way to identify this model is HA or not HA model, I've checked WLC's label and inventory and PID, both are AIR5508-K9. it's not clear which is HA.
2. if order is correct, is there possible to convert WLC to HA mode without AP license (50) ? I've reset config to factory default, but no use.

Hi,
1. is there any way to identify this model is HA or not HA model, I've checked WLC's label and inventory and PID, both are AIR5508-K9. it's not clear which is HA.
If you bought this part number :AIR-CT5508-HA-K9 - Cisco 5508 Series Wireless Controller for High Availability, means you have HA WLC.
AIR5508-K9  - It means that it just a normal model with AP license.
2. if order is correct, is there possible to convert WLC to HA mode without AP license (50) ? I've reset config to factory default, but no use.
There is no way to convert t HA mode without 50 AP license.
Regards
Don't forget to rate helpful posts

Similar Messages

  • Can't seem to download any app despite entering the correct password and answering 3 security question but still in the end it comes up the message that my session has timed out no matter what! Please help, many thanks in adv!!

    Can't seem to download any app despite entering the correct password and answering 3 security question but still in the end it comes up the message that my session has timed out no matter what! Please help, many thanks in adv!!

    Try doing it on your computer with iTunes and then sync to your iPad to see if it clears the problem.

  • Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

    Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

    Not in the Safari browser she can't. That is not supported on the iPad. There are other mobile browsers that do have that functionality - one is iCab Mobile.
    https://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8

  • Extending wireless network, switching to Ethernet; question?

    I currently have a Time Capsule in an upstairs office, wirelessly (in bridge mode) extending the signal from an Airport Extreme downstairs where the cable modem is located. I understand that this arrangement effectively cuts the available wi-fi bandwidth over the whole netwok in half.
    I am about to install a direct Ethernet link between the two rooms, and intend thereby to connect the upstairs Time Capsule to the downstairs Airport Extreme while still providing wireless connectivity upstairs. My question, since I can't seem to find a discussion of this specific case online: do I need to change anything in the router configurations? Will the upstairs Time Capsule still function in the same bridge mode setup it currently uses, just automatically start extending the ethernet signal instead of using half the wi-fi bandwidth by extending it wirelessly? Will I indeed realize a doubling of available bandwidth for my home wi-fi network merely by plugging in the Time Capsule?
    If you have good links to information about this specific use case, please feel free to share.
    Many thanks in advance!

    Okay, of course after I gave up and asked here, I ran across this article in the KB:
    http://support.apple.com/kb/HT4260
    My problem, it would seem, is I did not know the magic words I needed were "roaming network."

  • Is it possible to share aps between my iPad and iPhone, I have tried several methods yet I still get charged if I download an app I already have on my iPad.  many thanks, Alex

    Is it possible to share apps from my iPad onto my new iPhone 4. I have tried several suggestions from the net but still get charged when I download an app to my phone that is already on my iPad.  Many thanks,  alex

    Greetings Alex,
    You should be able to download the exact same app from the iTunes store to a different device at no extra cost.  Its possible you might be downloading an iPad only version of an app you happen to have on your iPhone although I'm not familiar with an example of this. 
    If you are being charged:
    1. Make sure you are using the same iTunes Store account (AppleID) on both devices.  Your purchases are tied to the AppleID so if you don't use the same one to download the app that you used to buy it the first time,  you'll be charged.
    On the device you originally bought the app in question:  Go to Settings > Store -- note the AppleID here
    On the device you re-downloaded and were charged on:   Go to Settings > Store -- note the AppleID here
    If these AppleIDs are different then you have your answer.  You are making purchases with two different accounts so logically you've been charged twice.  Decide which AppleID you wish to use from now on and on the device which does not currently have that ID and tap on it in the Store section of the settings and login with the other AppleID.
    If these AppleIDs are the same then something is going wrong in the process.  Contact iTunes Store support email to have them take a peek: http://www.apple.com/support/itunes/
    Hope that helps.

  • My iPhone is a iPhone 3GS. For some reason, the ringer becomes silent although I have put the ringer on full volume. Would someone kindly teach me how to solve this problem? Many thanks!!

    My iPhone is a iPhone 3GS. For some reason, the ringer becomes silent although I have put the ringer on full volume. Would someone kindly teach me how to solve this problem? Many thanks!!

    Just to make sure... you have the phone in ringer mode right? Sometimes the switch on the side gets bumped (especially if you don't have a case on the iPhone) and goes into silent. If you see a orange line on the switch - it's on silent.
    If the switch is fine (and isn't loose or anything) try restoring the iPhone in iTunes.

  • Urgent Question about System Center Server Names and Dashes

    Hey guys I have a quick Urgent question that would be awesome if it happens to get answered quickly :). 
    So in the past we had problems with different server names in components of System Center when setting up different servers.... I never myself saw the errors or what it did, but an absentee colleague did. For example is anything wrong with a name setup like
    xx-scom-01 / xx-scom-02  as compared to the standard scom01 scom02? We have a certain naming convention we are moving to and I wanted to see if this was fixed. I wanted to say it had something to do with the hyphens... anyways any foresight anyone can
    provide would be awesome. Thanks!

    Dashes in the name will work fine.
    Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

  • PVC2300 - Video Monitoring System (3 urgent questions)

    Hi there,
    I'm pretty sure these questions have been asked before - but could not find answers to these.
    Setup:
    When running a Video Surveillance setup, with up to 16, PVC2300 cameras connected to the Video Monitoring System (LBAVMS16):
    1. Does the PC running LBAVMS16 need to be "on" all the time for the video feed to be stored on a NSS device?
    2. Is there any difference between the "old Linksys" monitoring software and "LBAVMS16"?
    3. Can you run a mixed camera (WVC2300 and PVC2300) environment using "LBAVMS16"?
    I have a partner testing the solution and I would guess they are not the only ones facing these same questions.
    Many thanks in advance!
    Rasmus Almqvist, Territory Market Manager
    Phone: +358 40 774 6719
    Email: [email protected]

    Hello,
    First, you want to use SWVMS16.  Its the newer Small Business Software Video Monitoring System that will work with WVC210, PVC2300, WVC2300, and PVC300 (new).
    http://www.cisco.com/cisco/web/solutions/small_business/products/security/small_business_video_surveillance_cameras/index.html
    The 'latest' version you will find here is 1.0.0, but when we announce the PVC300 orderable, that should go to 1.0.1.
    Please upgrade both the PVC2300 and WVC2300 to 'Camera' FW version 1.0.1 for it to work with SWVMS16.
    This SW is free so just come back and check in the coming weeks for the update.
    The older LBAVMS16 will not support the PVC300 and has the old Linksys SKIN and is actually a different SW completely.   The newer one is the Cisco small business offering we will have going forward.   The older SW would allow you to set up the motion detection and then it would run in the task bar, and it would record as motion occurred, even though it was not open.
    The new SWVMS16 has a concept of a MAIN console (role based access) and after you define the 'Always' on or 'Motion Detection' configuration, you will then need to click on START/STOP in the Recordings GUI Drawer and select START RECORDING SCHEDULE and then all the cameras will have a Green LED indicator on the screen showing they are active and ready and will follow the configuration.   You can minimize it at this point, but you cant close it.  CLosing it will stop the schedule.   The datasheet should show the PC requirements to run this application, and to be honest, if you have more than 4 cameras, this is not a part time task.  Of course, it will depend on the Video quality you set up on each camera, but you will find monitoring 8 cameras will use your CPU and Memory (run the Windows Task manager to see).  This is why for 16 cameras, we recommed a very powerful PC with alot of RAM.
    I am running a Dual Intel Core 2 CPU 6400 @ 2.13GHz Machine with 1 GB or RAM and with 4 cameras at Highest quality it runs at 45-55% CPU utilization, just as an example.    So the point is this PC should be pretty much dedicated to this function of monitoring, recording, playback.
    Now keep something else in mind.  The Cameras (all of ours) dont need the SWVMS16 to do motion detection to NSS, or EMAIL.  The cameras themselves can FTP (client) motion detection (MPEG4 or MJPEG) direct to NSS (FTP server) or SMTP Mail.  Its configured on the Camera.   And with a PC Browser, you can monitor the Camera, or QuickTime, etc.  The SWVMS just makes it easy to monitor them all in one place with all the convenience and functions you would use in a SMB.  So technically SWVMS16 is not needed to operate motion detection to the NSS, but if you are running SWVMS, then yes, it needs to be on.
    In fact, I run BOTH on my cameras.  That is, I have them set to FTP to my NSS, and I also have them monitored by SWVMS.  Our Cameras are dual stream, dual codec, and have no problem with this, and can be monitored from up to 10 HTTP servers as well (RTSP increases that), which is usually enough.
    An interesting twist, which is also practiced and supported, is defining the NSS File Share as the SWVMS16 Video Storage location.  Just another option to consider.
    Hope this clarifies a little?
    Steve DiStefano
    SE US Field Channel

  • My iPhone 4 has switched off for no reason , and now I am unable to switch this on again ??? if anybody has a answer about how I could reboot it , he's welcome, many thanks .

    my iPhone 4 has switched off for no reason, and now I am unable to switch this on again???if anybody could help about a reboot tip , he's welcome, many thanks...

    1. On your iPhone 4 press and hold both the button and the Home button for about ten seconds. After ten seconds you should see the Apple logo showing up.
    2. Now try to run you phone again and see if it works.
    If a hard reset the still can't get the device back to a working order.
    1. Plug in the device to the cumputer and start iTunes.
    2. Press and hold the Sleep/Wake + Home for 10 seconds.
    3. Once you see the Apple Logo appears, release the power and continue to hold down the home button for about 5-10 seconds. Look iniTunes and see if your device have shows up.
    4. iTunes will notify you that you are now in Recovery mode. Click on OK to continue with the restore process.
    5. Next press and hold on the SHIFT button and click on the Restore button. Select the latest IPSW file and the prompt appears.
    6. iTunes should now attempt to get your device back to the manufacturer setting.
    7. iTunes will later give you an opportunity to restore you content from the PC. Every time when you do a sync, iTunes makes a backup so you can choose the latest backup from the sync.

  • PhotoShop CS5 Extended serial number - NOT accepted - is there a quick fix? Many thanks and hugs for the winning answer :-)

    guys, i need you help - CLEARLY - so I bought PhotoShop CS5 Extended two years ago - but never real used it - today I requested the serial number - which was sent asap - BUT the system doesn't accept it, says it invalid - question - am I doing doing something wrong or is there a quick fix? Many thanks and hugs for the winning answer :-) Somayeh!

    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option.
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

  • Why is my Snow Leopard 10.6.8 suddenly giving me a gray screen and progress bar after I've turned it on? The progress bar takes 4-5 minutes to complete then signing on with my password and all other operations are normal. Solution? Many thanks.

    Why is my Snow Leopard 10.6.8 suddenly giving me a gray screen and progress bar after I've turned it on? The progress bar takes 4-5 minutes to complete then signing on with my password and all other operations are normal. Solution? Many thanks.

    It's starting in safe mode > http://support.apple.com/kb/HT1564
    First of all, do a PRAM reset. If it doesn't help, open Terminal and type:
    sudo nvram boot-args=""

  • On right mouse click, there is no "save as" or "copy image" when I want to save a pictureon line. I have to go back to IE to access this option. Is this not available? Many thanks, Joy

    On right mouse click, there is no "save as" or "copy image" when I want to save a picture on line. I have to go back to IE to use this option. Is this not available? Many thanks, Joy
    There are so many occasions on line when I want to save an image that I can't believe I can't do so using Firefox, which I find so good in all other ways. I can Bookmark, save a page or send a link, but not take a simple copy image.

    Hi, Many thanks for replying, it's much appreciated. I started Firefox in safe mode and found I had the full right click menu on a pic on my home page. However, after moving around the web, I've found that the problem still occurs in eBay and it doesn't make any difference in safe mode. still no full menu. After returning to normal mode, I find that this still stands i.e. I do get the full menu on other sites but not in eBay. As I often want to save a pic in Ebay and can do so in IE, I'm baffled as to why this one site is giving problems. As this is where I've mostly been trying to save pics, I didn't realise that it was a "one site" problem and not applicable to everywhere else. If IE didn't work in this respect, I could blame the eBay site, but it does, so that just makes it more puzzling - and very annoying! I have tried accessing Ebay direct, rather than clicking on the toolbar, but this makes no difference. Any further thoughts would be much appreciated. Joy

  • SAP B1 Query Manager - Urgent Question

    I have a question, when we used query filter , how can clear the history when using query ?

    Hi . Nagarajan
    Many thanks for your information . Could you give me details instruction how to clear .Also do you have any command when open the query default clear the history first .
    Thanks
    Jackie Wong

  • HT1386 hiya ive recently got the iphone4s and have been trying to register it onto the itunes on my laptop but it wont do this for some reason, has anyone else had any problems doing this and if so how did you resolve the issue ? many thanks yvonne

    hiya ive recently got the iphone4s and have been trying ever since to get it to sync with my itunes account on my laptop but everytime i try to register it, it freezes up on me and then i have to do the whole process again without luck has anyone else had this problem and if so how did you resolve it
    many thanks
    yvonne

    If you aren't receiving password reset emails and your security questions don't work, someone has hijacked your account.
    This happened to me.
    You need to use Expresslane to contact iTunes support to regain access to your account ASAP.

  • TS1307 I am using mail for emails. It receives fine but it will not send. I am using an o2 account (smtp.o2.co.uk). Is o2 incompatible with mail? if so can you tell me which email application I can use instead? Many thanks Steve

    I am using mail for emails. It receives fine but it will not send. I am using an o2 account (smtp.o2.co.uk). Is o2 incompatible with mail? if so can you tell me which email application I can use instead? Many thanks Steve

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

Maybe you are looking for