WIRELESS ACCESS FROM DIFFERENT LOCATIONS

I bought a brandnew Airport Extreme and I want to connect an external hard disk to it on which disk I want to store all my files.
I use a Imac computer in my location in Amsterdam, a Imac computer and a Macbook Air in our secondhome in another regio far away in Holland and also
2 Ipads ( no. 2 and no. 3) for use on the road.
On the 3 Macs I run OS X Mavericks and there is a WIFI remote internetconnection in both locations, however each internetconnection runs through different internetproviders.
Is it possible to get access to the files on the hard disk connected to the Airport Extreme by using the different internetconnections on the two separate locations and if so, can anybody tell me how or provide me with usefull hints?
Thanks in advance!
Leo Hoogma
The Netherlands

Please check out the following AirPort User Tip. It should provide you with some options on how you can access the AirPort Disk from a remote location. Using different ISPs should not matter.

Similar Messages

How to access Excel files from different locations?

Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok Gupta

The custom function sets the MS-Excel default directory to System.getProperty("user.dir")+"/excel"
(the domain directory), then opens the filename passed as a parameter. I assume
that if you pass in the fully specified path for the excel file ( like d:\MyDir\data\test.xls),
that it would open that file.
- Mike
"Ashok Gupta" <[email protected]> wrote:
>
Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run
it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files
from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok Gupta

Udf to pass constant corrsponding to 2 file names from different location

if i have one source file, i m able to pass the file name directly to the target through the udf below:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
But i have 2 files from different location. Now both files has dates at the end. how can i pass AAA for File1.txt and BBB for File2.txt. .
after the above code, i have included below code too, but not working(*-for date n timestamps):
if(ourSourceFileName.equals("ABC*.txt"))
return "FILE1";
else if(ourSourceFileName.equals("XYZ*.txt"))
return "FILE2";
please suggest

Hi Basker,
Error in activating object in IR - heres the total code i have used for this purpose. plz help in getting this.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
if(ourSourceFileName.equals("SOURCE_1*.txt"))
return "File1";
else if(ourSourceFileName.equals("SOURCE_2*.txt"))
return "File2";
Source code has syntax error: /usr/sap/DXI/DVEBMGS31/j2ee/cluster/server0/./temp/classpath_resolver/Map27461f402eff11e0898d00144f1e71f0/source/com/sap/xi/tf/_MM_UPDATE_.java:839: unreachable statement if(ourSourceFileName.equals("SOURCE1_*.txt")) ^ /usr/sap/DXI/DVEBMGS31/j2ee/cluster/server0/./temp/classpath_resolver/Map27461f402eff11e0898d00144f1e71f0/source/com/sap/xi/tf/_MM_UPDATE_.java:844: missing return statement } ^ 2 errors

How to pick different files from different locations

suppose ur having multiple files(csv) from different locations,then how do u move those files to the SAP system.Please expalin me the scenario

Venu,
If the files are present in different folders, then you need different sender communication channels to bring this data to XI. Regarding connection with SAP, you can go for a proxy (If the webAs version is > 6.2) or else go for an IDOCor RFC adapter.
Regards,
Jai Shankar

ICloud Mail - Accessed from two locations simoutaneously?

Hello,
I got this message this morning from my iCloud Mail. It says that my iCloud Mail account has been accessed from two locations simoutaneously, and that I have 24 hours to receive confirmation of ownership of my account or it will be suspended. There are no links in the email to confirm that I am the real user. What do I have to do to prove that I am the real owner? I don't want my email suspended!
Thanks for any information before 9:00 AM tomorrow, because that's when the 24 hours are up.

Yea, that sounds fishy. Can't believe that Apple would mispell iCloud. Looks like someone wanted you to reply with your username, password and location. Might be worth contacting Apple about it. If you explained that you were contacting them as a good samaritan to report a possible security threat that might effect other users they probably wouldn't charge you for the call.
If you're concerned, you could always change your password (http://support.apple.com/kb/HE36). After doing so you would need to sign out, then back in using the new password for all services you are using the ID for. For iCloud, you have to delete the account (which only deletes the account and your synced data from your device, not from iCloud), then sign back in with the new password. Your data will be synced back when you sign back in.

I wish to download (and use of course) Creative Cloud on my NAS to be able to have access from various locations using my laptop PC and tablet. Does anybody know whether this is possible? So the programm software at the NAS and operate it from there.

I wish to download (and use of course) Creative Cloud on my NAS to be able to have access from various locations using my laptop PC and tablet. Does anybody know whether this is possible? So the programm software on the NAS and operate it from there.

OK, thanks
but EULA ?? what does it stand for? I am pretty new to all this so good to learn something.
ps. backgroud of my request is, that I purchased LR in a box in 2013. The computer where this is on, is at the end of its life and I have no LR box with License or any reference nr's anymore.
Copied to my new Laptop, which maybe is not allowed if I understand you correct, it didn't work.
Pitty, because afterall it is still my legally relatively recent purchased LR version.
I thought to overcome this problem in future by putting it on my NAS. Safe for many years to come.
again any knowlegeable feedback is welcome to me.
Jos

Backup archivelogs from different location

DB : 10.2.0.4
OS : HEHL5
due to space issue i moved the archived to different location from log_archive_dest_1.
is it possible to backup the archivelogs from different location as i moved them?
Thanks.

My bad , it's not a must! Please see,
bash-3.2$ ls
o1_mf_1_34_8jk60c7b_.arc o1_mf_1_35_8jkz3p0l_.arc o1_mf_1_36_8jlcqpky_.arc
bash-3.2$ mkdir /tmp/archivelognewloc
bash-3.2$ cp *.* /tmp/archivelognewloc
bash-3.2$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jan 30 14:40:17 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
allconnected to target database: **** (DBID=1228973204)
RMAN>
RMAN> catalog start with '/tmp/archivelognewloc';
searching for all files that match the pattern /tmp/archivelognewloc
List of Files Unknown to the Database
=====================================
File Name: /tmp/archivelognewloc/o1_mf_1_36_8jlcqpky_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_35_8jkz3p0l_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_34_8jk60c7b_.arc
Do you really want to catalog the above files (enter YES or NO)? yes
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /tmp/archivelognewloc/o1_mf_1_36_8jlcqpky_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_35_8jkz3p0l_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_34_8jk60c7b_.arc
RMAN>
Update : A little better demo
SQL*Plus: Release 11.2.0.1.0 Production on Wed Jan 30 15:00:32 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining
and Real Application Testing options
SQL> alter system switch logfile;
System altered.
SQL> /
System altered.
SQL> alter system checkpoint;
System altered.
SQL> alter system switch logfile;
System altered.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining
and Real Application Testing options
bash-3.2$ ls
o1_mf_1_38_8jldnkog_.arc o1_mf_1_40_8jlfdnph_.arc
o1_mf_1_39_8jlfdmoq_.arc o1_mf_1_41_8jlff2nn_.arc
bash-3.2$ pwd
/u01/app/oracle/flash_recovery_area/AMER/archivelog/2013_01_30
[root@EDHDR3P0 ~]# ls /tmp/archivelognewloc/
[root@EDHDR3P0 ~]# exit
logout
bash-3.2$
bash-3.2$
bash-3.2$ pwd
/u01/app/oracle/flash_recovery_area/AMER/archivelog/2013_01_30
bash-3.2$ ls
o1_mf_1_38_8jldnkog_.arc o1_mf_1_40_8jlfdnph_.arc
o1_mf_1_39_8jlfdmoq_.arc o1_mf_1_41_8jlff2nn_.arc
bash-3.2$ ls /tmp/archivelognewloc/
bash-3.2$ ls -l /tmp/archivelognewloc/
total 0
bash-3.2$ cp * /tmp/archivelognewloc/
bash-3.2$ ls -l /tmp/archivelognewloc/
total 3620
-rw-r----- 1 oracle oinstall 549888 Jan 30 15:02 o1_mf_1_38_8jldnkog_.arc
-rw-r----- 1 oracle oinstall 3117568 Jan 30 15:02 o1_mf_1_39_8jlfdmoq_.arc
-rw-r----- 1 oracle oinstall    1024 Jan 30 15:02 o1_mf_1_40_8jlfdnph_.arc
-rw-r----- 1 oracle oinstall   19456 Jan 30 15:02 o1_mf_1_41_8jlff2nn_.arc
bash-3.2$ pwd
/u01/app/oracle/flash_recovery_area/AMER/archivelog/2013_01_30
bash-3.2$ rm -rf *
bash-3.2$ ls
bash-3.2$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jan 30 15:03:13 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: AMER (DBID=1228973204)
RMAN> backup archivelog all;
Starting backup at 30-JAN-13
current log archived
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=151 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 01/30/2013 15:03:32
RMAN-06059: expected archived log not found, loss of archived log compromises recoverability
ORA-19625: error identifying file /u01/app/oracle/flash_recovery_area/AMER/archivelog/2013_01_30/o1_mf_1_38_8jldnkog_.arc
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN> catalog start with '//tmp/archivelognewloc';
searching for all files that match the pattern //tmp/archivelognewloc
List of Files Unknown to the Database
=====================================
File Name: /tmp/archivelognewloc/o1_mf_1_39_8jlfdmoq_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_41_8jlff2nn_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_40_8jlfdnph_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_38_8jldnkog_.arc
Do you really want to catalog the above files (enter YES or NO)? yes
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /tmp/archivelognewloc/o1_mf_1_39_8jlfdmoq_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_41_8jlff2nn_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_40_8jlfdnph_.arc
File Name: /tmp/archivelognewloc/o1_mf_1_38_8jldnkog_.arc
RMAN> backup archivelog all;
Starting backup at 30-JAN-13
current log archived
using channel ORA_DISK_1
archived log /u01/app/oracle/flash_recovery_area/AMER/archivelog/2013_01_30/o1_mf_1_38_8jldnkog_.arc not found or out of sync with catalog
trying alternate file for archived log of thread 1 with sequence 38
archived log /u01/app/oracle/flash_recovery_area/AMER/archivelog/2013_01_30/o1_mf_1_39_8jlfdmoq_.arc not found or out of sync with catalog
trying alternate file for archived log of thread 1 with sequence 39
archived log /u01/app/oracle/flash_recovery_area/AMER/archivelog/2013_01_30/o1_mf_1_40_8jlfdnph_.arc not found or out of sync with catalog
trying alternate file for archived log of thread 1 with sequence 40
archived log /u01/app/oracle/flash_recovery_area/AMER/archivelog/2013_01_30/o1_mf_1_41_8jlff2nn_.arc not found or out of sync with catalog
trying alternate file for archived log of thread 1 with sequence 41
channel ORA_DISK_1: starting archived log backup set
channel ORA_DISK_1: specifying archived log(s) in backup set
input archived log thread=1 sequence=38 RECID=45 STAMP=806079846
input archived log thread=1 sequence=39 RECID=42 STAMP=806079846
input archived log thread=1 sequence=40 RECID=44 STAMP=806079846
input archived log thread=1 sequence=41 RECID=43 STAMP=806079846
input archived log thread=1 sequence=42 RECID=41 STAMP=806079812
input archived log thread=1 sequence=43 RECID=46 STAMP=806079851
channel ORA_DISK_1: starting piece 1 at 30-JAN-13
channel ORA_DISK_1: finished piece 1 at 30-JAN-13
piece handle=/u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T150411_8jlfmcmf_.bkp tag=TAG20130130T150411 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 30-JAN-13
RMAN> list backup of archivelog all;
List of Backup Sets
===================
BS Key Size       Device Type Elapsed Time Completion Time
1       981.94M    DISK        00:01:15     30-JAN-13
        BP Key: 1   Status: AVAILABLE Compressed: NO Tag: TAG20130130T143224
        Piece Name: /u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T143224_8jlcqs5d_.bkp
List of Archived Logs in backup set 1
Thrd Seq     Low SCN    Low Time Next SCN   Next Time
1    5       830546     25-JAN-13 841823     25-JAN-13
1    6       841823     25-JAN-13 866733     25-JAN-13
1    7       866733     25-JAN-13 889743     25-JAN-13
1    8       889743     25-JAN-13 912846     26-JAN-13
1    9       912846     26-JAN-13 931109     26-JAN-13
1    10      931109     26-JAN-13 952239     26-JAN-13
1    11      952239     26-JAN-13 979268     26-JAN-13
1    12      979268     26-JAN-13 1004465    26-JAN-13
1    13      1004465    26-JAN-13 1021707    26-JAN-13
1    14      1021707    26-JAN-13 1040437    27-JAN-13
1    15      1040437    27-JAN-13 1068031    27-JAN-13
1    16      1068031    27-JAN-13 1091450    27-JAN-13
1    17      1091450    27-JAN-13 1114656    27-JAN-13
1    18      1114656    27-JAN-13 1137779    27-JAN-13
1    19      1137779    27-JAN-13 1165125    27-JAN-13
1    20      1165125    27-JAN-13 1199499    28-JAN-13
1    21      1199499    28-JAN-13 1228282    28-JAN-13
1    22      1228282    28-JAN-13 1249640    28-JAN-13
1    23      1249640    28-JAN-13 1270613    28-JAN-13
1    24      1270613    28-JAN-13 1291570    28-JAN-13
1    25      1291570    28-JAN-13 1312497    28-JAN-13
1    26      1312497    28-JAN-13 1332622    28-JAN-13
1    27      1332622    28-JAN-13 1365097    28-JAN-13
1    28      1365097    28-JAN-13 1395297    28-JAN-13
1    29      1395297    28-JAN-13 1407058    28-JAN-13
1    30      1407058    28-JAN-13 1437549    29-JAN-13
1    31      1437549    29-JAN-13 1469773    29-JAN-13
1    32      1469773    29-JAN-13 1504608    29-JAN-13
1    33      1504608    29-JAN-13 1522578    29-JAN-13
1    34      1522578    29-JAN-13 1553706    30-JAN-13
1    35      1553706    30-JAN-13 1586954    30-JAN-13
1    36      1586954    30-JAN-13 1603625    30-JAN-13
BS Key Size       Device Type Elapsed Time Completion Time
2       538.00K    DISK        00:00:01     30-JAN-13
        BP Key: 2   Status: AVAILABLE Compressed: NO Tag: TAG20130130T144745
        Piece Name: /u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T144745_8jldnkxt_.bkp
List of Archived Logs in backup set 2
Thrd Seq     Low SCN    Low Time Next SCN   Next Time
1    38      1604067    30-JAN-13 1604680    30-JAN-13
BS Key Size       Device Type Elapsed Time Completion Time
3       3.64M      DISK        00:00:00     30-JAN-13
        BP Key: 3   Status: AVAILABLE Compressed: NO Tag: TAG20130130T150411
        Piece Name: /u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T150411_8jlfmcmf_.bkp
List of Archived Logs in backup set 3
Thrd Seq     Low SCN    Low Time Next SCN   Next Time
1    38      1604067    30-JAN-13 1604680    30-JAN-13
1    39      1604680    30-JAN-13 1606046    30-JAN-13
1    40      1606046    30-JAN-13 1606049    30-JAN-13
1    41      1606049    30-JAN-13 1606057    30-JAN-13
1    42      1606057    30-JAN-13 1606303    30-JAN-13
1    43      1606303    30-JAN-13 1606353    30-JAN-13
RMAN> crosscheck backup of archivelog all;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T143224_8jlcqs5d_.bkp RECID=1 STAMP=806077945
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T144745_8jldnkxt_.bkp RECID=2 STAMP=806078865
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T150411_8jlfmcmf_.bkp RECID=3 STAMP=806079851
Crosschecked 3 objects
RMAN> list backup of archivelog all;
List of Backup Sets
===================
BS Key Size       Device Type Elapsed Time Completion Time
1       981.94M    DISK        00:01:15     30-JAN-13
        BP Key: 1   Status: AVAILABLE Compressed: NO Tag: TAG20130130T143224
        Piece Name: /u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T143224_8jlcqs5d_.bkp
List of Archived Logs in backup set 1
Thrd Seq     Low SCN    Low Time Next SCN   Next Time
1    5       830546     25-JAN-13 841823     25-JAN-13
1    6       841823     25-JAN-13 866733     25-JAN-13
1    7       866733     25-JAN-13 889743     25-JAN-13
1    8       889743     25-JAN-13 912846     26-JAN-13
1    9       912846     26-JAN-13 931109     26-JAN-13
1    10      931109     26-JAN-13 952239     26-JAN-13
1    11      952239     26-JAN-13 979268     26-JAN-13
1    12      979268     26-JAN-13 1004465    26-JAN-13
1    13      1004465    26-JAN-13 1021707    26-JAN-13
1    14      1021707    26-JAN-13 1040437    27-JAN-13
1    15      1040437    27-JAN-13 1068031    27-JAN-13
1    16      1068031    27-JAN-13 1091450    27-JAN-13
1    17      1091450    27-JAN-13 1114656    27-JAN-13
1    18      1114656    27-JAN-13 1137779    27-JAN-13
1    19      1137779    27-JAN-13 1165125    27-JAN-13
1    20      1165125    27-JAN-13 1199499    28-JAN-13
1    21      1199499    28-JAN-13 1228282    28-JAN-13
1    22      1228282    28-JAN-13 1249640    28-JAN-13
1    23      1249640    28-JAN-13 1270613    28-JAN-13
1    24      1270613    28-JAN-13 1291570    28-JAN-13
1    25      1291570    28-JAN-13 1312497    28-JAN-13
1    26      1312497    28-JAN-13 1332622    28-JAN-13
1    27      1332622    28-JAN-13 1365097    28-JAN-13
1    28      1365097    28-JAN-13 1395297    28-JAN-13
1    29      1395297    28-JAN-13 1407058    28-JAN-13
1    30      1407058    28-JAN-13 1437549    29-JAN-13
1    31      1437549    29-JAN-13 1469773    29-JAN-13
1    32      1469773    29-JAN-13 1504608    29-JAN-13
1    33      1504608    29-JAN-13 1522578    29-JAN-13
1    34      1522578    29-JAN-13 1553706    30-JAN-13
1    35      1553706    30-JAN-13 1586954    30-JAN-13
1    36      1586954    30-JAN-13 1603625    30-JAN-13
BS Key Size       Device Type Elapsed Time Completion Time
2       538.00K    DISK        00:00:01     30-JAN-13
        BP Key: 2   Status: AVAILABLE Compressed: NO Tag: TAG20130130T144745
        Piece Name: /u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T144745_8jldnkxt_.bkp
List of Archived Logs in backup set 2
Thrd Seq     Low SCN    Low Time Next SCN   Next Time
1    38      1604067    30-JAN-13 1604680    30-JAN-13
BS Key Size       Device Type Elapsed Time Completion Time
3       3.64M      DISK        00:00:00     30-JAN-13
        BP Key: 3   Status: AVAILABLE Compressed: NO Tag: TAG20130130T150411
        Piece Name: /u01/app/oracle/flash_recovery_area/AMER/backupset/2013_01_30/o1_mf_annnn_TAG20130130T150411_8jlfmcmf_.bkp
List of Archived Logs in backup set 3
Thrd Seq     Low SCN    Low Time Next SCN   Next Time
1    38      1604067    30-JAN-13 1604680    30-JAN-13
1    39      1604680    30-JAN-13 1606046    30-JAN-13
1    40      1606046    30-JAN-13 1606049    30-JAN-13
1    41      1606049    30-JAN-13 1606057    30-JAN-13
1    42      1606057    30-JAN-13 1606303    30-JAN-13
1    43      1606303    30-JAN-13 1606353    30-JAN-13
RMAN> HTH
Aman....
Edited by: Aman.... on Jan 30, 2013 3:06 PM

Problem sending mail from different location

I cant send mail when connecting via a different server than my own network provider i.e. when connected wirelessly away from home office. Comes up with message:-
Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator.
The server response was: <[email protected]>: Recipient address rejected: Relay access denied
You can try to send using a different server. All messages will use this server until you quit or change your network settings.
If I change the outgoing smtp setting to the network provider that I am connected to then mail will send.
Can this problem be rectified?
Kind regards

Most, if not all ISPs used for connecting to the internet now block the use of SMTP servers that are outside of their network (or not provided by the ISP) on Port 25 or what is termed "relay access" per the error message.
Some ISPs allow the use of an authenticated SMTP server only that is outside of their network on Port 25 but some block its use regardless.
These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain.
If the ntlworld SMTP server is not authenticated (even if authenticated there is no guarantee it will work depending on the restrictions imposed by the ISP used for connecting to the internet other than your own), you can try changing the server port from 25 to 587 but doing so is no guarantee either.
Go to Mail > Preferences > Accounts and under the Account Information tab for the ntlworld account preferences at the SMTP server selection, select the Server Settings button below.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If ntlworld has an authenticated SMTP server and it doesn't work on Port 25 when connected to the internet via a different ISP or using Port 587 for the SMTP server doesn't work regardless if the SMTP server that is outside of the ISP's network is authenticated or not, your only other option is using the SMTP server provided by the ISP used for connecting to the internet.
There is no other way to rectify this problem regardless the email client used or platform - OS X or Windows.

Multiple jar files from different locations

Hello,
I am having an applet that access code from two different jar files. Of them one is a common jar file for many applets. So I couldn't place it in the local dir as that of the applet's html. I am not using any web server.
     Just to give you a feel of it :
     <PARAM NAME = archive VALUE = "DVApplet.jar,DVVP.jar" > are the jar files my applet is dependant on. But DVVP.jar has to be accessed from a dir different from local dir.
     Will be glad if someone can throw some light on accessing different jar files from different dirs.
     Thanks for your time.
Regards,
Anantha

[url=
http://forum.java.sun.com/thread.jsp?forum=421&thread=425724&tstart=0&trange=100
]This question is a bit similar
You can use a class loader to do such things.

BPM 11g setting up Oraganization Roles from different locations

Hi,
Our BPM process has 2 Roles Requester and Reviewer. We have Requesters in US, ASIA and CANADA, the same with Reviewers also. So Requester from US creates the task and submits the task. This task should go to Reviewer from US. How can we achieve this? And also, the Requestors/Reviewers in one location should not be able to view tasks created by Requestors/Reviewers from a different location.
Appreciate your inputs.
MC

Keep the users of different regions in different Groups. Like Requesters_APJ, Requesters_EMEA and Approvers_APJ, Approvers_EMEA.
Add a script activity to "somehow" figure out the region of the "Requester" user. Based on this, dynamically change the assignee of the next task i.e. the Requester task to the Approver group for that region.
Good practice -> At design time, avoid mapping swimlanes to Users, Roles or Groups. Do this after deploying the process/workflow from the EM console. Another way is to do the dynamic assignment as I mentioned.
Hope this helps.

Directing iTunes to read from different location

Right now, in restoring iTunes to my new computer, iTunes is accessing the playlist from the following mapping - where "E" is an external hard drive disk:
E\Angela itunes\itunes\itunes Music\Artist\CD Name\Track Number
Is there a way to have iTunes change where it looks from "E" to "C" - and also if I just copy the the "library" file from "E" to "C" and change the mapping will I be in the same place as I was with the old computer?
What file (which right now is in "E") is the library - the playlist?

Assuming you use the iTunes default settings where iTunes copied added items to your iTunes folder and organizes your library (meaning - everything is all self contained in the iTunes folder), then all you have to do is drag & drop your iTunes folder (not just the iTunes Music folder you find inside the iTunes folder) to the external drive and copy the entire thing.
If you want to test that it worked or would like to actually start using it from that location instead, use these instructions when you start iTunes to point it to the new location...
How to open an alternate iTunes Library file or create a new one
http://docs.info.apple.com/article.html?artnum=304447
If you are just testing, then close iTunes after you verify it works, and restart iTunes again with the same instructions and point it back to your internal drive (original) location.
At this point your can plug the external into the new computer. If you want to run the library off the external then open iTunes with the above instructions and point to the external. If you want to move it to the new computer's internal drive, then copy the entire folder again off the external onto the internal then again start iTunes with the above instructions and point it to the existing library you just moved.
Cheers,
Patrick

Loading "font.properties" from different location

Is it possible to tell the JVM to load "font.properties" files from a different location instead of "$JAVA_HOME/jre/lib"?
Thanks in advance.
Regards.

Is it possible to tell the JVM to load
"font.properties" files from a different location
instead of "$JAVA_HOME/jre/lib"?
Thanks in advance.
Regards.I am also looking for a solution for this, since it's not a good idea to modify the JRE itself.
Could anybody help? Thanks.

Monitoting services from different location then I have SCOM 2012 R2

Hello
I am interested in the ability to monitor services (particularly
in the Exchange OWA) from a different
location than I have placed SCOM
server. I environment of
different networks and branches. I don´t want to pay for
GSM (Global Service Monitor)I there some kind of "probe" or
simplified SCOM? I do not have
the opportunity to take in every branch of
such a great performance on SCOM, connnectivity speed between branches is not problem.
thanks a lot

Thomas,
there is no need for a fileshare. You could let the ps1 below run natively in a SCOM PowerShell worklow and it will provide the data in so called property bags:
param(
$monitorComputer,
$monitorURL
Invoke-Command -ComputerName $monitorComputer -ArgumentList $monitorURL {
$result = Invoke-WebRequest -URI $monitorURL
Return $result
# Return the values from CMDLET
$bag.AddValue("Workflow Computer",(hostname))
$bag.AddValue("Monitoring Computer",$monitorComputer)
$bag.AddValue("Monitor URL",$monitorURL)
$bag.AddValue("Status Code",$result.StatusCode)
$bag.AddValue("Status Description",$result.StatusDescription)
$bag
You could now create your own MP running a PowerShell monitor.
Or you can implement the following solution to being able to use the wizard:
http://blogs.msdn.com/b/wei_out_there_with_system_center/archive/2013/10/03/opsmgr-using-wizards-to-create-powershell-based-monitors.aspx
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Sync group down? All my agents from different locations offline in same time.

Now is 2014-10-17, 10:22PM EST. Portal shows all my agents from 3 different locations offline. The last sync was done at around 8:30. I've confirmed my agents are online, and they can successfully ping service. Last nite was another nightmare, it look more
than half an hour for a sync cycle. Went back to normal all the suddent at 4am early morning.
What's going on?
Thanks,
Dan

Hi,
Thanks for your reply.
The service went back to normal at 1AM EST. It was down for 4 hours 30mins. But the service interruption is just too sudden and frequence as I said it went down on Thursday (16th Oct) night as well.
Here's my sync group info.
Sync group ID : a0d2cc7b-3a3e-481f-a3b5-be26a373fd5a_Southeast Asia
Region : Southeast Asia
Date time of the issue : 17th OCT 8:30PM EST to 18th OCT 1:00AM EST
Traing ID : No error found from logs since the sync group didn't work at all. It showed all of my agents offlined. And the sync group showed "Warning"
Please let me know if you need additional info. Thanks.
Dan

Why does PSE 10 Organizer jumble up photos on the same date from different locations ?

I have PSE 10 installed on a PC with Windows 7. My camera is a Nikon D90 using a Sandisk 8 gb SD card. When I take photos at different locations on the same date and download them into the Organizer , instead of keeping the photos from the different locations together by location, it jumbles them all up. It does not keep them in order by time taken from first to last for that day , it just mixes them all up in random order. Why ?

Hi Lyndy,
When you use Albums and Keyword Tags, you aren't moving the images around (they stay in their folders) - you just look at them differently.
What you can try is this:-
1) select one of your folders in folder view so that it displays all of those images in filename order
2) click on the instant album button (to the top right of the thumbnails)
This will generate an album with the same name as the folder
3) Now switch to Thumbnail view
4) click on the new albumb name on the right side
Now, all the images should be in date/time order - you may have adjust the options
The real power of the Keywrd Tags is the many different ways you can look at the images.
If you have a Keyword Tag structure like this:-
Places
     Scotland
            Holyrood
            Britania
Then if you assign the Holyrood and britania tags to the appropiate photos, there are various ways of viewing the photos.
Selecting just Holyrood would show only the Holyrood ones
Selecting Scotland would show both Holyrood and Britania ones.
The only limit seems to be your own imagination
I hope that gives you ideas rather than adding confusion
Brian

WIRELESS ACCESS FROM DIFFERENT LOCATIONS

Similar Messages

Maybe you are looking for