Wireless adapter is not working.

My WiFi is not working, please help me. For tree days I’m trying to turn on wireless adapter.
In Programs and Features I have Atheros 802.11 showing. But in Device Manager it is not showing up. On switch Fn+10 is going on but the control lamp is not going on. I have reinstalled the driver Atheros_WLAN 8.0.0.196. I tried even Atheros AR928x Wireless Network Adapter, but it is not working. I upgraded to Win 7 Home Premium, reset to original factory state, to Win 7 Starter. Now I again upgraded to Win 7 Home Premium. Nothing helped.
I'm hoping you can help me out.
Peter.

You could try a couple of simple things that might help:
SMC Reset
Shut down the computer.
Unplug the computer's power cord and disconnect attached devices.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.  You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

Windows 8 Wireless Adapter do not work?

Well, i just installed windows 8 but my wireless adapter do not work ;(! I have a hp 802.11b/g wireless network adapter! I got an HP Pavilion a6023.sc stationary PC! Please help asap!
//Kevin
This question was solved.
View Solution.

Hi:
This is the only thing that I can think of that will work...see if manually installing the Vista 64 bit driver works on W8.
Run this driver. If it installs automatically, great. If not...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-65991-1&cc=us&dlc=en&lc=en&...
Go to the device manager and click on the network controller needing drivers.
Click on the driver tab. Click on Update Driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
That folder will be located in C:\SWSetup\sp34931. Make sure the Include Subfolders box is checked and see if the driver installs that way.

Wireless Adapter isn't working.

Just installed Windows 10 Pro Technical Preview 9926 and my wireless adapter isn't working. I tried downloading the driver from Dell's site, but it fails with the following. I'm trying to install it on a Dell 3521. Any suggestions?
[03/02/15 20:10:46]
--- End of Vendor Software Log ---
[03/02/15 20:10:46] Vendor Software Return Code: 10
[03/02/15 20:10:47] logo.png
[03/02/15 20:10:47] Name of Exit Code: ERROR_INSTALL_PLATFORM_UNSUPPORTED
[03/02/15 20:10:47] Exit Code set to: 5 (0x5)
[03/02/15 20:10:47] Result: FAILURE

my suggestion:
When the PC manufacture(Dell)'s driver is not supported for Windows 10, try to download and install the driver that your device(wireless adapter)'s original vendor, such as Intel, Realtek.
Be careful about vendor and model name of your device, i.e. identify it accurately.
You can get to know about your device, via Device Manager.
1. [Windows] + [R] and enter "control"
2. select [System and Security] -- [System]
3. select [Device Manager] on the left side
4. click [Network adapters]
Good Luck!

How do I correct the "Wireless Radio is not working" problem on my Photosmart C410 Printer?

HP Photosmart Prem C410a All-in-One
Windows 7 64-bit
Wireless Radio is not working
Trying to change from USB to wireless setup
purchased at Staples on 8/19/2010 - means warrenty has expired

With the printer ON, unplug power from the back of the printer for 30 seconds. Does that reset the radio?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Ac power adapter is not working

i bought this item apox. 9/10 months ago from Tesco so i dont know if i have any cover?
HP Photosmart Plus All-in-One Printer - B209a
ac power adapter is not working and i ready own hp printers and dont want to have to splash out on another.
please help...
This question was solved.
View Solution.

Hi,
You should still be under warranty, but if not you should be able to buy one from HP Parts Surfer.
I hope this helps
JonW
I work for HP

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

Problem : System Freezes frequently on any hardware scan or changes.
Symptom : Wireless Keyboard Mouse not working.
Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
Soultion : Please follow steps below
Step 1: Start > run > regedit
Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
This worked for me. Hope this works for you. Enjoy..!!

Hi AshishSrivastava,
Thank you for your sharing and update.
Besides, I will change this thread type as discussion.
Best regards
Michael Shao
TechNet Community Support

The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
Just in case the title is too long to show, I have re-pasted here:
The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

BDAqua wrote:
Hello & welcome to the Forums!
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/
Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

Wireless net does not work after installing SP1 for Vista - Error code 10

After installing Vista SP1 on my computer (T61 - Vista Business 32 bit) my intel 82566mm wireless net does not work.
Windows says "Error code 10" and suggests that I update the driver. I have downloaded the newest driver via another computer, but it does not help. Still error code 10.
Any one else has the same problem?

I fixed the problem. Uninstall iTunes and then reinstall it clean. Looks like upgrading is problematic.

The letter "u" on my iMac's wireless keyboard is not working.

The letter "u" on my iMac's wireless keyboard is not working. Does anyone know how to fix this? All the other key are working fine.

I started a having problems with it a few days ago. It worked intermittently then.

Apple av adapter does not work after updating ios 5,01

apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

Wireless key will not work

I just moved my mac mini to my new apartment and my wireless keyboard will not work. My man mini model is A1103. The problem is that I need to type in a password to get on my mac to get to the bluetooth config screen. So I'm stuck at the login screen with a keyboard that just blinks. Its also my TV so im goin nuts. PLZ help.

If you know someone with an USB keyboard, borrow it and use it to input the password. It doesn't need to have been made by Apple or designed to be used with a Mac.
(50804)

AC adapter light not working

When charging my Macbook Pro sometimes the indicator LED light doesn't come on at all. Everytime I checked when the LED isn't working the computer still charges, but I am not sure if when I leave it sometimes if it is charging correctly since the LED doesn't work periodically. I am also wondering if this is an issue with the adapter, rather then the actual computer port. If it is the computer port I don't feel comfortable with sending it out for repairs if its just a small issue. I guess what I am trying to see is if anyone else has experienced this issue. I would much rather go to the apple store and recieve a new adapter, and if the issue persists I can send it in for repairs. Please if anyone has experience with the same trouble I have had let me know. Thank you in advance.
-Andrew

May be the adapter is not working properly.
Take the MBP and MagSafe/Power Adapter to the Apple store for evaluation.
For:
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best.

Laptop adapter in not working

laptop 420 se.mo-5CG10706HG
this laptop charger is not working

Hi
Please call HP Technical support check your warranty incase your sure the Adapter is not working get it replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Wireless adapter is not working.

Similar Messages

Maybe you are looking for