Wireless adapter not showing any available networks

I've recently discovered that my Intel Centrino Advanced-N 6235 wireless adapter in my Asus Zenbook UX32VD running Windows 7 64 bit is not working as it won't show any available networks while my phone can find plenty in the same area.
So far I've:
-Re-installed the driver. Before I did this the adapter wouldn't even show when trying to change adapter settings. When I looked at the adapter in device manager I found an error code 52 which disappeared after I re-installed the driver.
-Re-installed the client for windows networks installed for the adapter which did not make a difference.
-Temporarily turned off my AVG-free anti-virus which did not make a difference.
When looking at the adapter after clicking change adapter settings in the networks and sharing center it says it's not connected, but as stated above it doesn't show any networks to connect to.
Also, when I try to use the networks diagnostics tool I get the following error message:
Windows cannot find
'::{26EE0668-A00A-44D7-9371-BEB06...\resultPage?keywords=+Network;NetworkDiagnostics'.
Make sure you typed the name correctly, and the try again.
Any possibly solutions I've not already tried are welcome. Thanks in advance for any help.

Hi,
Locate to Services and check all services relating to wireless and network are enabled: Wireless Zero Configuration and WLAN AutoConfig, etc.
Also, make sure your NIC is working correctly from device manager.
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=108496d0924847afaf9c4a7bb72110b5_5646.xml&pid=80&converted=0
Have you tried manually connecting to wireless?
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=8fd9ee85a0bf42f0986ed23390be8c66_19850.xml
Andy Altmann
TechNet Community Support

Similar Messages

My iphone 4 will not show any wifi networks

my phone will not show any wi-fi networks i'm not sure whats wrong, i tried restoring multiple times nothing changed.. im not sure what to do.

I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

Wireless adapter not showing up in device manager

Hello all,
I am having a particularly frustrating problem. I was playing around with the memory timings to overclock my computer and all of a sudden, my wireless adapter ceases to exist to my computer. It does not show up anywhere in device manager (including no unknown devices or anything), only the Ethernet shows up. I have tried a system restore, turned off all OC and my BIOS is updated to the most recent version. Is it possible that trying to overclock my computer caused the wireless adapter to burn out? The motherboard I'm using is the msi x99S gaming 9 ack.
Any help would be very appreciated, thank you all in advance for your time to help out!

remove power cord from the PSU and >>Clear CMOS Guide<<
if the wifi card is removable, try to reseat it
also install latest killer drivers from:
http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64
[try older version as well if needs]

Rug not showing any available updates, when there should be

This is 64bit NOWS SBE 2.5
This is about my tenth install on the same machine trying to get through it.
After I installed, the Rug Gui showed one update. I did that update and then rebooted.
Rug Gui then showed 103 updates to do. It was late in day so I shut down the server.
This morning I came in and started the machine up and the Rug Gui showed the same 103 updates to do. I was reading email on a separate machine and glanced over at the NOWs terminal and noticed the Rug Gui had turned into a Globe (not the exclamation point). I seriously DID NOT TOUCH THE THING.
Now when I click on the Globe it says no updates available.
The past two installs, I would install, go through the first update, then the 103 updates, and then when it rebooted the Rug would not show the updates to move to the next service packs. I initially thought it was a problem in the customer center b/c I had accumulated several machines against my license (even though they are just rebuilds of the same machine), but this time I had removed all the systems from the customer center online BEFORE I did this last install. Anyone have any ideas as to how to get my updates back working?

See my post below ....
Scarey eh?
you will need to get support to fix it - assuming you have a contract !
"dwjrdto2000" <[email protected]> wrote in message
news:[email protected]..
>
> This is 64bit NOWS SBE 2.5
>
> This is about my tenth install on the same machine trying to get
> through it.
>
> After I installed, the Rug Gui showed one update. I did that update and
> then rebooted.
>
> Rug Gui then showed 103 updates to do. It was late in day so I shut
> down the server.
>
> This morning I came in and started the machine up and the Rug Gui
> showed the same 103 updates to do. I was reading email on a separate
> machine and glanced over at the NOWs terminal and noticed the Rug Gui
> had turned into a Globe (not the exclamation point). I seriously DID NOT
> TOUCH THE THING.
>
> Now when I click on the Globe it says no updates available.
>
> The past two installs, I would install, go through the first update,
> then the 103 updates, and then when it rebooted the Rug would not show
> the updates to move to the next service packs. I initially thought it
> was a problem in the customer center b/c I had accumulated several
> machines against my license (even though they are just rebuilds of the
> same machine), but this time I had removed all the systems from the
> customer center online BEFORE I did this last install. Anyone have any
> ideas as to how to get my updates back working?
>
>
> --
> dwjrdto2000
> ------------------------------------------------------------------------
> dwjrdto2000's Profile: http://forums.novell.com/member.php?userid=75601
> View this thread: http://forums.novell.com/showthread.php?t=439867
>

Windows 2003 on T61 wireless adapter not showing

I have 7658( CTO) T61 with XP pro.... I downgraded windows 2003 enterprise edition SP2. i have few questions
1. I changed the bios to compatibility mode ( I keep sata then win 2003 not booting, so changed to compatability mode). Is it required that I keep compatability mode.?
2. Wireless adapter is not working ( not showing at all). It is PCI\VEN_168C&DEV_1014&SUBSYS_058A1014&REV_01\4&29E2C51B&0&00E1
I downloaded and tried many drivers from lenovo website but is not working.
I have struggled for a week and searched many forums but nothing is helping me out. Please help me.

You will need the Windows 2003 compatible SATA drivers to stop using compatibility mode. I don't know if they exist... good luck there. Try Intel's web site since you probably have an Intel chipset.
As for the wireless adapter, again it may be a matter of Win2003 not recognizing the device. I would try and manually install several drivers and see which one may work. You may have to force-feed Win2003 since it doesn't recognize the hardware. Be sure you know the manufacturer of the wireless chip... Intel or Broadcom or Atheros? Look at the specs for your laptop.

My iphone 4s does not show any wifi networks

I have tried many suggested solutions(below) and nothing is working. Any other suggestions please?
- restart phone
- restart router then phone
- reset network settings
- reset all settings
- enable mac filter on router and adding the MAC address of the phone
- Airplane mode on / off
- changed channels on the router

if other devices can connect to the routers. but not your phone. i would take it to the apple store to have them trouble shoot the wireless in the phone. if you reset everything and still can't get a connection then its the phone thats the issue. just as a test. have you restored phone back to factory ? of course backing it up first ? if not i would try that. go to settings on phone. general. reset to factory after doing a backup. then try after that. but don't restore your files yet. test before you add your restore.

Virtual network adapter not showing as domain network

Hi
I've got a Windows 8.1 machine that is connected to a domain on the LAN.
Before I installed Hyper-V the network showed up as "Domain Network" in the network and sharing center but when I installed Hyper-V I created a virtual switch (external) and since then the network has shown up as "Private Network".
This is on the Windows 8.1 host and the machine has full access to the LAN and the Internet and is using the domain for logins and permissions, which allows me to browse file shares on other machines on the network without having to sign-on. Most of the
time I'm not even running any virtual machines on the PC, I have Hyper-V for testing websites on different versions of IE.
The only problems I have are the network type not being detected correctly, my local firewall blocking lots of stuff I run on it (due to the firewall rules all being set up for a domain network) and also when I RDC to another machine it refuses to use saved
credentials as it can't identify the machine (I don't know if this is related to the domain network problem).
Has anyone any suggestions what could be going wrong or how I can diagnose the problem?
Thanks

Hi Mog00,
Could you please run command "ipconfig /all " and post the information here .
Maybe you can try "Troubleshoot Problems" in "Network and Sharing Center" to diagnose and repair network problems .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TS1398 iPad is not showing any available wifi even though my husbands iPad works anywhere in our house. My iPad worked fine until last week.

My IPad is just under 1 year old and I purchased at SAMs Club. It has just started not being able to find wifi in our home. My husbands iPad picks up wifi from any room in the house but mine has to be in the same room as the router. What can I do?

This is the iPhone forum. Post in the iPad forum.

MOVED: Wireless adapter not showing up in device manager

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=253761.0

remove power cord from the PSU and >>Clear CMOS Guide<<
if the wifi card is removable, try to reseat it
also install latest killer drivers from:
http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64
[try older version as well if needs]

Wireless network connection not showing up in network connections

Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.

Issue Resolved. I did not turn on the wireless switch.

Photoshop CS6 is not showing any network drives within windows 8.1.

Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local. Network is not highlighted selected.
Here is a CC Open one windows 7 pro showing areas of what is accessible.

TS1398 My iphone 4 will not show any networks, when there is wifi, what do i do?

I ordered my iphone 4 from ebay, and t is unlocked. its really new but fror some reason will NOT connect to wifi. it wont even show other networks when there is wifi. any solutions to my problem??

I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

How do i update 10.5.8 if my macbook does not show any software updates?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

MSE 8.0.110.0 not showing any clients

hi all,
i just posted a reply in some other thread stating the same thing but decided to make my own topic.
set-up:
2x5760 running 3.6.0
mse appliance running 8.0.110.0
prime infra in VM running 2.2
ap - 3702I / E
problem:
wireless clients not showing on the prime floor maps.
what have done so far:
wlc synced with mse thru nmsp - check
wlc added to prime - check
mse added to prime - check
mse synced with wlc thru prime - check
all aps positioned on the maps - check
CAS enabled on mse - check
NTP configured to wlc , mse and prime - check
check time all synced
nmsp status in mse - active
nmsp status in wlc :
WLC1#show nmsp status
MSE IP Address   Tx Echo Resp Rx Echo Req   Tx Data     Rx Data
x.x.x.x      618           618           43878       10
WLC1#show nmsp subscription sum
Mobility Services Subscribed
Server IP         Services
x.x.x.x       RSSI, Info, Statistics, AP Monitor, Attachment, Wired Location
WLC1#show nmsp subscription deta
Mobility Services Subscribed by 10.29.220.9:
Service         Subservice
RSSI            Mobile Station, Tags, Rogue
Info            Mobile Station, Rogue
Statistics      Mobile Station, Tags
Attachment      Wired Station
Location        Subscription
AP Monitor      Subscription
troubleshooting done so far:
deleted then added mse on prime then resynced to wlc
reconfigured nmsp on wlc and resynced again with mse
rebooted mse - no avail
rebooted prime - no avail
reboot wlc - not an option coz theres a lot of users =)
tia,
chris

Thanks Pete, I have done that, in fact I used a useful utility to update that property on a batch of servers.
Thanks for the thought, any additional ideas?
Cheers
Andrew

Wireless adapter not showing any available networks

Similar Messages

Maybe you are looking for