Wireless adapter Z-Com XG-703A doesn't work with WPA after reboot

Hello everybody,
Arch doesn't load kernel module arc4 during boot with usb wireless adapter Z-Com XG-703A. So WPA doesn't work and It can connect to only opened access points.
I found two work arounds but I don't know how to fix the issue completely.
1. Remove usb adapter and plug it in again (it causes arc4 module to load), then restart networking.
2. rmmod p54usb, rmmod p54common, modprobe arc4, modprobe p54usb and after that restart networking.
Could anybody help to fix the problem generally?
$ lsusb
0cde:0008 Z-Com XG-703A 802.11g Wireless Adapter [Intersil ISL3887]
$ uname -a
Linux arch 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 08:11:41 UTC 2012 i686 Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz GenuineIntel GNU/Linux
Stas

Does the p54common get loaded again as well when you do modprobep54usb?
If not, you might just put that into modprobe.conf blacklist.
If it does get loaded as well, there might be another wireless module getting loaded that perhaps does cause problems. You can check that with
mkinitcpio -v
now, or with lsmod after a reboot before your workaround.

Similar Messages

HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password. One site said that Apple TV doesn't work with WPA which Uverse uses. Is there anyway around this or will Uverse and Apple TV just not work together.

Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?

Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet.

How come forms central doesn't work with my iPhone?

Forms Central works great from a PC, but when I try and load the sign in page using my iPhone, it tries to load a page, gets half way, then a new web address comes up, tries to load that page, and goes back and fourt and is stuck in a loop. What's happening?

I am having this same issue.

E70 doesn't work with WPA/WPA2!

Hello, ppl!
Does anybody know if there is any chance that E70 will work with WPA/WPA2 encryption? Found it is not working with my home router configured to WPA but works with WEP. However WEP isn't strong protection and I'd prefer WPA. I just took phone to see it's capabilities before buying but lack of WPA would stop me from purchase - WM devices never had such trouble
'd like to hear from someone who do really know if this device will ever work with WPA and maybe it could do now.
PS. have installed latest firmwares to the router and mobile phone.

ST.x wrote:
Maos wrote:
iphitus wrote:Sorry, I upped a new netcfg but forgot to run the update scripts on archlinux.org.... done now, the package is up.
I am very impressed of what all of you are doing but out of curiosity I ask in the most humble way when the x86_64 package will be up?
ABS
Doh! Don't know why I didn't think of that...

Latest EyeTV doesn't work with remote after installing latest candelair, 1.20 no option in preferences to activate snow leopard?

After upgrading to Snow Leopard my mac remote no longer works with EyeTV. Have checked EyeTV is the latest version, have also installed the latest Candelair which other users have advised needs to have snow leopard activated in the preferences but on my version there is no mention of this in the preferences pane.
Just lists...
Driver version 1.20 installed
The remote control infrared receiver is enabled
This computer only works with the remote with ID 27 (after I paired it)
Issues with your remote?
Can anyone advise?
Thanks

So, I figured it out myself. Way back in time I had set up some ipfw rules that I had completely forgotten about, which included this:
01000 allow ip from 192.168.0.0/16 to me dst-port 5900 in
Since I switched to the AEBS, of course the IP range changed to 10.0.1.x, so ipfw was blocking it. Problem solved.
Now I just need to figure out why my AEBS keeps crashing..

HT204380 My apple ID doesn't work with FaceTime after IOS 6 update

Once I updated my IPAD to IOS 6 , my apple ID stopped working with FaceTime and iMessage
Every time I enter the password, it says that apple Id is not matching
I am sure that it is the right one, I checked it in iCloud and iTunes, it is working well.

Something as simple as your method of payment having expired could be causing your problems. Use the link below to check all info, especially your payment info, for your Apple ID.
https://appleid.apple.com

HT204053 I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

Yes that makes sense, however have you updated it at My Apple ID before trying to change it in your system preferences > iCloud settings, you must do that first.

HT204291 i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video j

i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?

That's why, you will need to upgrade to 10.8

Airport express joins wireless (green flash on) but airplay doesn't work? Why oh Why?

Airport express joins wireless (green flash on) but airplay doesn't work? I have turn off the firewall on the router, but still I cannot connct wireless to the airport express.

Please check out the following Apple Support article to see what the minimum requirements are for AirPlay to work.
Also the following Apple Support article talks about the specifics on how to use an AirPort Express Base Station for AirPlay.

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Apex 4.2 pre-prod Theme 50 doesn't work with BlackBerry 6.0

The theme 50 in the pre-pod 4.2 on apex.oracle.com doesn't work with BlackBerry version 6.0. Input fields turn black with black when they get focus
This is a Jquery Mobile bug.
See
http://stackoverflow.com/questions/11870842/how-to-fix-a-blackberry-browser-input-from-going-black-on-focus
https://github.com/jquery/jquery-mobile/issues/4828
https://github.com/jquery/jquery-mobile/issues/4836
Any chance of implementing a work around or patching JQM?

Putting the second suggestion at Stack Overflow into the in-line CSS seems to have done the trick.
.ui-btn.ui-focus, .ui-input-text.ui-focus, ui-input-search.ui-focus {
outline: none;
-webkit-box-shadow: none;
There is still an issue that when a link is selected it show the same behaviour but that's more liveable with and I haven't given up hope of finding the class which is causing it.
The JQM guys look like they have a solution too but I couldn't work out which version it would be applied to.

Apple Firewire to Thunderbolt doesn't work with my Infrasonic Deux sound card

Hello! My soundcard "Infrasonic Deux" doesn't work with Apple Thunderbolt to Firewire adaptor on my macbook pro 15 retina. On the other mac's the same problem! Via Firewire my soundcard work as well! but it doesn't work with Adapter! Help, please!

If you purchased an unlocked iPhone at an Apple store, it should be useable with any SIM. Its possible they just made a mistake and gave you the wrong model phone or there is something wrong with that phone. If that is the case, just take the phone and your receipt to an Apple store, explain the situation and they should swap it out for an actual unlocked one.

Horizontal scrolling doesn't work with ItemsStackPanel in ListView(GridView)

Hi,
In Win 8.1 App Store Project I have a ListView with fixed width and listen for ContainerContentChanging event because of performance issues.
When ListView width is less than content width, horizontal scrolling doesn't work. If we change ItemsStackPanel to VirtualizingStackPanel, horizontal scrolling works fine. But ContainerContentChanging doesn't work with VirtualizingStackPanel.
Is it possible to make horizontal scrolling work with ItemsStackPanel?
Here simple example to reproduce this problem:
<Page
x:Class="App8.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:App8"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d">
<Page.Resources>
<DataTemplate x:Key="ContinuousViewItemTemplate">
<Border Width="800"
Background="Green"
Margin="10"
Padding="5">
<Border x:Name="root" Height="800" Background="{Binding}"/>
</Border>
</DataTemplate>
<Style x:Key="ListViewStyle1" TargetType="ListView">
<Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Visible"/>
<Setter Property="ScrollViewer.HorizontalScrollMode" Value="Enabled"/>
<Setter Property="ItemTemplate" Value="{StaticResource ContinuousViewItemTemplate}"/>
</Style>
</Page.Resources>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="100"/>
<ColumnDefinition Width="500"/>
<ColumnDefinition/>
<ColumnDefinition Width="500"/>
<ColumnDefinition Width="100"/>
</Grid.ColumnDefinitions>
<ListView Style="{StaticResource ListViewStyle1}" Grid.Column="1">
<SolidColorBrush Color="Red"/>
<SolidColorBrush Color="Cyan"/>
</ListView>
<ListView Style="{StaticResource ListViewStyle1}" Grid.Column="3">
<ListView.ItemsPanel>
<ItemsPanelTemplate>
<VirtualizingStackPanel/>
</ItemsPanelTemplate>
</ListView.ItemsPanel>
<SolidColorBrush Color="Red"/>
<SolidColorBrush Color="Cyan"/>
</ListView>
</Grid>
</Page>

Hi Mikhail Maksyuta,
Welcome back!
Yes, you are right! I have reproduced it on VS 2013 professional.
I will report it as bug, Thanks for your valuable suggestions!
If you have any other questions about this, please feel free let me know!
Thanks again!
Regards!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Wireless adapter Z-Com XG-703A doesn't work with WPA after reboot

Similar Messages

Maybe you are looking for