Wireless and network script restart

Hi,
I have the following problem. I'm using net-auto for autoloading wi-fi netprofile at boot time. When the profile fails to load, it won't load even when doing /etc/rc.d/net-auto restart, neither when I use netcfg -a and starting the profile manually. The only thing visible is that association failed. Any ideas where to look for problems any further? Thanks
Tomas

I had this problem solved installing Quirks as explained on the wiki
http://wiki.archlinux.org/index.php/Net … d_later.29
For me, as I use madwifi, I added
QUIRKS=(prescan predown)
as I use madwifi and essid is hidden.

Similar Messages

Wireless and network printing transcript for Meet the Experts

On March 16th, HP hosted its first online chat event on wireless and network printing. Below is a transcript of that session.
I am in the process of planning the next chat event. I would love to hear what topics would interest you, what day of the week and time is best for you, and if you think an hour is too long.
So, if you get a minute, please let me know.
Here's the transcript:
SiobhanF-HP: Welcome! Cameron, Craig, David, and Jim are ready to tackle your questions.
SiobhanF-HP: Just to remind you if you want to ask a question, you must be a member of the HP Support Forums. If you want to join, go here https://passport2.hp.com/hppcf/createuser.do
nc256: Do I need a wireless router to hook up my wireless printer?
CameronL-HP: No, but most people will want to do it this way. You can use a feature called an ad hoc connection to avoid using a router, but it is only covered under an older standard that is slower and less secure. Also, without something to route traffic between the local network and the internet, you cannot get an internet connection. Using a wireless router makes setting up a wireless network easier, and it will generally make the network work better too.
jest1: I've seen some hardware in stores for a "print server" hardware device that attaches to a network. Is this something that I need in order to run a printer over a network?
CraigB--HP: Not if you have a printer that has a network connection built in. Many models of HP computers are ready to be connected directly to your wired or wireless network.
katiepage: How can I print when I am using a VPN?
DavidH-HP: VPN connections generally hide the rest of your home network to increase the security of the VPN connection. A printer on the network isn’t a security threat but the VPN doesn’t know that. It just hides everything just to be sure. That means that when a VPN is active you need some way to connect to the printer other than your home network. Bluetooth, USB, and even printing to a thumb drive and plugging that into the printer are all ways of getting your print job to the printer that don’t go through your home network.
SiobhanF-HP: If you have specific product questions, the more information you give us the better we will be able to help you. Getting your exact model number; any error messages; a description of your wireless network including what kind of security you have, what wireless-devices are connected to your network, and your IP address will go a long way to helping us answer your question.
MelissaP: Why would I want a wireless printer?
CraigB--HP: The main advantage of a wireless printer is the ability to place the printer somewhere in your home or office even if this is not near your router or computer.
Deltan: What is the maximum distance I can have between my router and my printer?
CameronL-HP: It does depend on your environment. Without interference about 25 feet. Walls and floors and other objects can reduce this. The types of walls are important. For example, mirrors and outdoor walls will greatly reduce the indoor range.
jest1: Is there a preferred wireless router type or brand for wireless printing compatibility? We are using a Linksys 802.11g router in my home.
JimB-HP: In general, any wireless-router from a name brand manufacturer that has been Wi-Fi certified is compatible with our printers (look for the Wi-Fi logo). We use Linksys in our lab with great success.
nc256: Are there any digital cameras that can send directly to an HP wireless printer for photo printing?
DavidH-HP: Many printers support a feature called Pictbridge. If the camera and printer both supports this feature, the camera can be plugged directly into the printer to print photos. Or are you asking about printing over a network connection?
KevinW: I keep hearing that you shouldn’t use default settings for a network. Why?
CraigB--HP: There are three reasons not use default settings: First, wireless-routers do not have any wireless security enabled by default. Second, you will be using a common network name in which case you may connect accidentally to your neighbor’s network. Third, your wireless-router is accessible by inadvertent guests who may change the configuration of your wireless-router without your knowledge or use your internet connection without your permission.
Bodie08: I have an HP Lan attached printer and Windows XP on my home network. Is there a known setting (Firewall/port/other) or patch to address the issue of hpqtra08.exe hanging on Windows XP Shutdown? A number of us in the forum have identified this issue. Thanks!
DavidH-HP: This problem has been seen in the past but there were attempts to address it. Have you checked to see if there is a later release of software available on the web? (hp.com)
ZhuLee3: How old is wireless printing technology? I noticed all the experts have around 20 years of experience with it, was there wireless 20 years ago?
JimB-HP: Wireless printing first appeared with the introduction of the 802.11 standard in late 1990's. HP has been making wireless printers since 2003.
lpeterson123: What makes wireless so flaky at times?
CameronL-HP: There are lots of reasons. Wireless signals are affected by distance, walls, metal objects, and other wireless devices like cordless phones. However, most of the problems seem to be from how the network or how security software is configured, and these can also cause things to fail only occasionally or in certain situations. Having a good wireless connection between a PC and printer involves several hardware devices and lots of software made by different companies that all have to work together; if something is not quite right in any of these things then the whole solution looks flaky.
Bowman16: I use a Mac, are there any features that would not work if I was to set it up for wireless use
DavidH-HP: All the features will work on a Mac if you install the full HP software solution.
jest1: Thanks for the answer on the router question. The next question, then, is to ask what would be a recommended consumer-grade wireless-enabled printer (or series) just so I can start my research.
JimB-HP: Any of our Photosmart or Officejet wireless printers will work with Wi-Fi certified wireless-routers. Our price points really have more to do with how much printing you do. In general, our more expensive printers cost less per page than our less expensive models.
Bodie08: Why would I choose "spooling" on my PC over "direct connect”?
CraigB--HP: In general, spooling allows you to use your program sooner than printing directly.
ZhuLee3: Jim: What is it like to be an "HP Printing Expert"? What kind of stuff do you get to work on, on a day to day basis?
JimB-HP: I really like my job -- I've always been a radio enthusiast so working on 802.11 technology is really a dream job for me. I'm also fortunate to work with a great team here in Vancouver, WA. More importantly, I like designing equipment that people use in their everyday lives.
TEACHER1: Recently I changed routers, now I am unable to print wirelessly, even though the SES and wireless network light are steady on my Deskjet 6980 printer. What is the solution? Thanks.
DavidH-HP: The wireless light indicates that the radio is on but does not indicate that the printer is connected to the network. First check that the printer is connected to the network by printing a network configuration page from the printer.
AgentRed: I get my internet with a Verizon wireless broadband card. Someone told me that wouldn't work with a wireless printer. Is that true?
CameronL-HP: Our wireless printers use the 802.11 b, g or n standard which is not compatible with the wireless cellular standard. It would be like trying to connect to a wireless network using Bluetooth. They are different wireless technologies.
DavidH-HP: Regarding the Verizon card, it is true that you cannot connect the printer over the Verizon connection, but as long as your laptop has Wife you can print to the printer over WiFi at the same time that the Verizon connection is active. This should not be a problem.
jest1: Is there a "minimum" internet connection that is recommended for wireless printing? We live a bit far from the DSL CO so our connection is sometimes flaky. I would guess that incoming speed shouldn't affect my local wireless LAN but I want to ask it anyway
CameronL-HP: There are 2 parts to your home network. 1 is your wireless router which manages your local network equipment, then your network connection to the world wide web which your DSL provider gives you. The connection speed of your local network is not affected by your internet connection speed.
Bowman16: Are any HP printers 802.11n? I do not want to add an 802.11b,g to my network and cause it to slow down.
JimB-HP: Currently, our printers comply with the 802.11g standard. We are investigation the emerging 802.11n standard.
ZhuLee3: Will there be a transcript of all the questions and answers from this chat available for viewing after the session? I think I missed some questions at the start.
SiobhanF-HP: The chat event begins when you joined. Sorry that you can't see what was said before you joined. I hope to have transcript posted tomorrow or on Wednesday at the latest.
nc256: Where is the future of printers headed? Does HP have any interesting plans with printing technology? And what’s your opinion on whether or not color laser printing will ever approachthe photo realism of ink jet color?
JimB-HP: The future of HP printing will be characterized by wireless connectivity to not only computers but to mobile internet devices. In fact, as mobile devices become smaller (think phone or netbooks), the need to print from your mobile device might become more relevant.
jest1: Am I able to print from my iphone to a wireless printer?
CraigB--HP: You can print photos from your iPhone to HP wireless printers and it works great in my experience. Go to http://www.hp.com/go/iprintphoto to get the details.
TEACHER1: Thank you. I printed a page. It shows that wireless is disconnected.
DavidH-HP: Then you just need to input the wireless settings from your new router into the printer. If your printer does not let you input the settings from the front panel, you can use the CD that came with the printer or downloaded from hp.com to configure the printer again ( look for the option to "add a device" ).
ZhuLee3: Question about security... if I get a wireless printer, what’s to prevent other people within range of my printer, from adding it and printing documents? How is this configured on the actual printer?
JimB-HP: The simplest way to secure your printer is to enable WPA-PSK security for your wireless network and to use a security pass-phrase that is at least 12 characters long. This configuration is very safe from intruders for the foreseeable future.
CameronL-HP: It' is also a good idea to use a unique network name, also called an SSID.
carolj: I have a photosmart C7180 and I have it hooked up to my laptop (windows vista) when the setup completed the printer was put in networking instead of printers and I cannot access it or move it out of there. What do you suggest?
CraigB--HP: You might need to uninstall and reinstall. Before doing this, make sure your get the latest driver from the HP support at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153754&lc=en&cc=us&dlc=en&lang=en&cc=us This is also where you can get a copy of the instruction book.
wizll: Hi, I haven't done much research in wireless printing, but I'm interested as I currently have my printer set up the old fashioned way where it's connected to a networked PC, but if the PC is off I can no longer print, which is obviously inconvenient. Do hp wireless printers have a web gui you can connect to once it's on the home network, or is it simply all done from the printer's interface. I've seen some old wired network printers that only use the printer's ui and that seems like a clunky use.
DavidH-HP: Yes, the HP printers which have networking built-in have what we call an "embedded" web server which allow you to configure settings, check status, and have many other features; on some models you can even scan using the embedded web server.
nc256: Jim: Will color laser printing ever reach ink jet quality for photos?
JimB-HP: While never is a long time, inkjet printers will, for the near future, output higher quality photos.
katiepage: If I'm at home, connected to my office network via VPN, can I access my office networked printers?
CraigB--HP: Yes, when you are connected to the office VPN, you can print to your office printers. However, you will not be able to print to your home networked printers while you are connected to the VPN.
jest1: If a friend comes over to my house with their laptop and needs to print something, are they able to do this just by authenticating with my wireless LAN (assuming I have a wireless printer set up)?
CraigB--HP: In addition to authenticating to your network, you friend will also need to install the printer driver for your printer.
jpszambelan: Is there a wireless USB device of some kind I can connect to my printer if there is no network connection already built in?
JimB-HP: HP sells an accessory that adds Wi-Fi capability to your USB printer (see http://www.shopping.hp.com/product/printer/inkjet/wireless/4/accessories/Q6236A%2523A2L) Also, many higher-end wireless-routers allows USB printers to be connected to them to allow sharing of the printer from the network. Note that this solution often limits you to just printing and not scanning from the network.
rockwoodchev: It seems that my computer can find my printer, but my printer can't find the computer, so that "Scan to computer" won't work. What do I need to do in order to fix that?
DavidH-HP: This can be blocked by security software running on the PC (such as a personal firewall). Make sure that your firewall is configured to allow communication on your local network. You can also unblock specific ports, but the easiest way is often just to allow communication on the local home network. The specific setting varies from firewall to firewall.
SiobhanF-HP: We are nearing the end of our chat session. We only have time for 3 more questions. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
SSPatrick: Is it possible to print wirelessly to the same HP printer using both a PC and a Mac?
JimB-HP: Yes -- I do this in my home. I have both Macs and PCs on my network without any trouble.
Bowman16: Any plans to do this again?
SiobhanF-HP: Yes we are.
ZhuLee3: Do all of the experts hang out on the HP community? Will we see you posting there after this?
DavidH-HP: Oh yes, whenever time permits. In addition to trying to help people, I learn things too.
JimB-HP: I'm known as Wi-Fi-Guy on the support forums. I hang out there often helping where I can. It helps me be a better designer.
CraigB--HP: I monitor the forums looking for problems to take back to the development lab for investigation. To date, I have only posted one reply.
CameronL-HP: I haven't been involved in the past but expect to be more involved in the future.
SiobhanF-HP: We only have time for one more question. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
ZhuLee3: Thanks for setting this up!
SiobhanF-HP: The transcript will be posted on http://h30434.www3.hp.com/psg/board?board.id=Networking
TEACHER1: Thank you all for conducting this session !!!!
jest1: Is there an OS limitation to print wirelessly?
JimB-HP: All the OS versions supported by the printer as supported wirelessly. In general, we are compatible with Macs, Windows and Linux.
SiobhanF-HP: We are ending the chat event. Thank you for coming. We hope you found it worthwhile. I will be posting a transcript of the event in the Networking and Wireless board in the Printers and All-in-Ones forum. We will be hosting future Meet the Experts chat sessions on a variety of topics, so please tell us what you thought of the event and how it could be improved. http://h30434.www3.hp.com/psg/board/message?board.id=Feedback&thread.id=525
Live Forum Closed
Message Edited by timhsu on 03-18-2009 05:39 PM
Message Edited by timhsu on 03-18-2009 05:43 PM
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

I expected this to be released quite earlier. But now that it's in process, I'll wait patiently.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

HP proudly announces the first "Meet the Experts" on line chat event: "Wireless and Network Printing 101"

Greetings!
See details of the upcoming Meet the Experts on line chat event
Topic: Meet the Experts: Wireless and Network Printing 101
click below link for more details!
March 16 chat event
Looking forward to seeing you there!
DaniW
HP Forum Admin
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Meet the Experts transcript can now be found here
Meet the experts transcript
Thanks & regards,
DaniW
HP Forum Admin
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Droid Razr M Kitkat 4.4.2 Update Removes All Wireless and Network Connectivity

For 2 days a screen has been popping up on my phone urging me to download and install Android 4.4.2 Kitkat. What could go wrong, I asked myself? Oh, brother!
Before: Android Jellybean has been chugging along contentedly on my phone for nearly a year. I love my phone. It has served me very well. I get a clear and full-strength signal from anywhere in my home using my personal router, and get a signal matching in quality to the strength and distance of Wi-Fi routers when I am out and about. (I previously had an HTC Desire with US Cellular and could NOT get a clear signal of 4 bars except very rarely. Usually I got 1 or no bars. Caveat: I live out in the country.) My Verizon Droid gets 4G network 5 X 5 almost always out here. Let's just say I've been very satisfied.
After: Android Kitkat is installed. Yay! Oh, phone. Why you no work no more? It's really simple. I have no wireless connection, even though the router is working perfectly and this is proved by the fact that my wife is online in the next room with her computer. I also have no 4G connection. I have no 3G connection. I HAVE NO CONNECTION! I have a brick which I can't even play my games on because they can't connect with the game servers.
So, first, thank you, Verizon, for sending out a product that has clearly not been properly tested. A casual look at the forums and other websites will show that this problem isn't peculiar to my phone. It's all over the country.
Second, please patch this pronto! My phone is dead! Dead to me, I say! Unless I have internet connections and the ability to make and receive phone calls, I will have to consider throwing in the Verizon towel and finding a competitor who can actually roll out a successful update.
All the best!
PRK

I fixed it! By myself! Me! Single-handedly! OK, I fixed it by accident after trying every thing that I saw mentioned on these forums regarding the update problems. What worked? No clue. I did: 3 soft resets; 3 switching on and off wireless; 5 forgetting and re-discovering my router and re-entering all the password key info; turned it off and left it off for 2 hours; changed/toggled every state of every wireless and data connection switch 5 times.
I'm not sure which of these worked. After turning it off and turning it back on after all the above attempts, I had signals. Wireless and 4G. Who knows why. So, dear Verizon, I take back the mean things I said. I'm sure you were trying as hard as you could in a stressful situation. Neither of us was at our best. Let's just agree to let it go and move on. OK? OK?

J6480 wireless and network help please!

I have an officejet J6480 that has an error in printing system when printing wireless. Everything is configured correctly and my printer reads the router and connects. If this problem cannot be fixed, can i use an ethernet connection directly from printer to router and get it to work. I tried this but also got a failure to print message. Please help asap! Thank you

hello,
first, cancel the print jobs
then try to restart the print spooler of the computer (click start>run... then type services.msc)
look for print spooler in the list
right click on the print spooler and click restart
if that doesnt work, then do a partial reset on the printer
unplug the power cord from the back of the printer without pressing the on button
press and hold # and 3 and wait for 10 seconds
plug the power cord back
wait for the printer screen to lit up then release the # and 3
try to ping the printer
try to print a test page again
keep me informed..

How to install Laserjet M1217 for both wireless and network

How to install an HP Laserjet Pro M1217nfw MFP on an XP system for both network and wireless capabilities?

Hi,
Are you talking about a mixture of wired and wireless ? If yes, please check your existing hardware and use the following manual to select one connection type then post back if having any porblem during the setup:
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Lenovo A800 Wireless and Network Problem

Hi,
I bought Lenovo a800 few months ago, t'was working fine until 2 days ago, I can't seem to connect to Wifi and Bluetooth
Every time I turn on these 2 options it will just say
Turning Bluetooth on...
then will be back to To see devices, turn Bluetooth on.
and for Wlan/Wifi
it will say Turning WLAN on
then nothing will happen, the white indicatore for WLAN will just blink and even if it is not turned on it doesnt close or it cant be removed.
Here is the picture

I have exactly the same problem. Have you fixed it already?

Macbook Pro can connect to Belkin N1 wireless, and says ISP and everything is fine, but I cannot seem to access the internet?

Hey everyone, I've been experiencing this problem for a very long time, my Macbook Pro has a lot of trouble connecting to my Belkin N1 wireless, however, when I sit far away from the router I seem to be able to connect and use the internet, though I have a lot of 'System Timeout' and have to reboot my wireless. After we moved houses, my room is extremely near the wireless, and before the Belkin was formatted with a password, I was able to use the internet without a problem. However, now I can connect to the wireless, and Network Diagnostics tells me that everything is good to go, however, I just can't seem to use the internet. No pages will load, I've tried everything changing proxies, looking through my security certificates and tried using IP addresses instea of website names and nothing seems to work.
I've gone to the store and have always been dismissed, with the excuse that Belkin is just not compatible my Macbook. I'm not technologically savvy, but I can follow instructions.
Thank you in advance!

Hello blinchikis. Welcome to the Apple Discussions!
Which Belkin model do you have? Are you running wireless encyption, WEP or WPA? If so, if you temporarily disable encryption, can you connect your iBook to the Internet now? How about if you connect your iBook, directly using an Ethernet cable?

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

IMac and Netgear DGND3300v2 on 5Ghz wireless n network problem

Hi guys, I'm can't seem to be able to connect my iMac (bought around Christmas 2010) to my Netgear router on 5Ghz wireless N properly.
Everytime I restarted the iMac, it will automatically connect to the 5Ghz network as I have set it up before. However, as soon as I start trying to use internet in any way, the connection just drops and all I can find then is my router on the 2.4Ghz network, running 802.11g.
I know the iMac can definitely connect to the wireless N network because I also have Windows 7 Ultimate on it. When I boot to Windows 7, the network works flawlessly. No connection dropping whatsoever.
Also my MacBook can connect to the 5Ghz with no problems. And it was bought in late 2008.
My iMac is running Mac OSX 10.6.7. In system profiler, the Airport tab has the following information:
Software Versions:
Network Preference: 6.2.1 (621.1)
AirPort Utility: 5.5.2 (552.11)
IO80211 Family: 3.1.4 (314.1.1)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x8F)
firmware Version: Atheros 9280: 2.1.14.5
Locale: APAC
Country Code: AL (shouldn't this be AU or something?)
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1 to 13
Wake on wireless: supported
Status: not associated
Local wireless networks: just a bunch of 802.11g and 802.11n running on 2.4Ghz in my building.
Any help will be appreciated, thanks in advance!

I've seen some threads saying changing the security on the wireless to WPA2-PSK will solve the problem, and I checked - my router is running using WPA2-PSK.

Joining a work network using wireless and proxy servers

Hi,
I have just arrived at a new work location, where we have an afterhours user network that we can connect to in our accommodation. I have had continual trouble trying to connect to the network, and have taken my MacBook to the geeks who provide the network. They can't fix the problem either (and are reluctant to as they don't like Mac's).
The problem is exactly as follows:
My airport instantly identifies the network. I need a password to connect to the network name, and this seems to work, but when I run the diagnostics it shows that the airport, airport settings and network settings are all green; but ISP, internet and server are red and failed.
Next I click on advanced, and the geeks informed me that I need to set up a Web Proxy (HTTP), Secure Web Proxy (HTTPS), FTP Proxy and SOCKS Proxy. They have all been done correctly with the same login and password (which was provided by the geeks). Now they have watched me do this and tried themselves, and they tell me it is correct and has worked previously on other peoples Mac's this exact way.
But for some reason after applying all this and even restarting the computer just incase, the ISP and onwards still fail to connect.

The good news is that the basic roaming network setup is the same with the newer 6.x version of the AirPort Utility.
Here are some step-by-step instructions using the 6.x version of the AirPort Utility.
First, there are a few key elements to successfully configuring a roaming network, and they are:
All of the base station must be interconnected by Ethernet. Note: You can use non-Apple routers in this type of network.
All base stations must have unique Base Station Names.
All base stations must use the same Radio Mode and Wireless Security Type/Password.
Each base station should be on a different Radio Channel. Using "Automatic" works well here.
All base stations, other than the "main" base station, must be reconfigured as a bridge.
Let's start with the "main" base station. This will be the one directly connected to the Internet modem:
AirPort Utility > Select the "main" base station > Edit
Base Station tab > Base Station Name > Enter a unique name here
Internet tab > Connect Using: DHCP
Wireless tab > Network Mode: Create a wireless network > Wireless Network Name > Enter the desired name. This will be used on all base stations > Wireless Security: WPA2 Personal (recommended) > Wireless Password > Enter the desired wireless password. This will be used on all base stations.
Network tab > Router Mode: DHCP and NAT
Click on Update
For each additional base station added to the roaming network:
AirPort Utility > Select the appropriate base station > Edit
Base Station tab > Base Station Name > Enter a unique name here
Internet tab > Connect Using: DHCP
Wireless tab > Network Mode: Create a wireless network > Wireless Network Name > Enter the desired name. This will be used on all base stations > Wireless Security: WPA2 Personal (recommended) > Wireless Password > Enter the desired wireless password. This will be used on all base stations.
Network tab > Router Mode: Off (Bridge Mode)
Click on Update

I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections. How do I get the two networks to connect?

I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections. How do I get the two networks to connect to each other?

Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl This way I can just use one of the LAN outputs from the Airport to feed the FVS318. Here is what I think I am hearing you say:
Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
To remedy the situastion here is probably what I need to do in order:
1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
2. Then, disable the Netgear FVS318G as a DHCP server.
3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
4. Restart everything.
Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict? I have the Airport Utility. I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
Thank you.
Steve

How to find SSID and Network Key to setup wireless printer to iMac?

It is easy to find your "SSID" and "Network Key" once you understand what you are looking for. Here is what worked for me when I setup a new wirless printer today:
1) SSID = Your Network Name
Ex. Jason's Wi-Fi Network
Ex. Harry's Lounge
First way to find: on an iMac, go to the top bar on the right side and click on the "wireless symbol". You will see a list of all the wireless networks your computer is picking up. The one you are connected to (if you are able to surf the Internet) is the name you enter when asked for the SSID.
NOVICE HINT: This is the equivalent to walking into a Starbucks and logging onto their wi-fi via their "network name," which has the word Starbucks in it. Some network names will have have locks next to them, meaning they are "secured by a password" and some will not, meaning anyone can access this "free" wi-fi. This doesn't matter either way, it just helps with making sure you have located the list. Of course, it is also possible, if you live in a remote area, that only your network name will show up.
Second way to find: on an iMac, go to the apple symbol in the upper left corner of computer and make sure it says "finder" (if it doesn't, just click on your desktop and it will show up), then select:
go > applications > utilities > Airport Utility > double-click on the image of the AirPort Extreme and the network name will be listed
2) Network Key = Password used to access your Wi-Fi Network
Ex. BMXGuy456!
Ex. Millionare$!!!
This is the password you created when you setup your wireless network, meaning it may not (and should not be for better security purposes) the same password as you use for your Apple ID, email etc.
NOVICE HINT: So if for example a friend came to stay with you and wanted to connect to your "secured wifi" meaning there is a lock next to it, you would give them this password.
EXTRA INFO:
Why do I need this info anyway?
Because just like anyone who wants to use your wifi when they come over, the printer needs to understand what to connect to, therefore it basically needs the network name to know "WHAT" to connect to, and the "PASSWORD" in order to access that network.

After much stumbling around, I also discovered this answer. I picked up the 2270DW used, without disc or manual, so downloaded what I needed from the Brother site, but the Brother Mac OSX instructions feel as if they're written by a non-Mac user. I am on OSX 10.7.5, using an Airport wireless unit in Bridging mode (because I have to use a provider's router at the front end of my setup). But once I picked my Airport network name through the Brother Wireless Setup Utility and then typed my network name in the SSID box and my network password in the Network Key box ("es" --- I think the "network key - i.e. password" had to be confirmed a second time) after waiting for the utility to process the information, it worked like a charm.

Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

Is it possible to have an HP and Canon wireless printer on the same wireless home network?

I presently have a Canon MP560 printer on my wireless home network. I do not have this printer installed on my computer. I purchased an HP 3520e-All-In-One hoping I could have both on my home network. My os is Windows 7 64bit. I tried to install the HP 3520e, and received the following error message - "Your printer failed to join the wireless network", and said the issue was that MAC address filtering may be enabled on my computer, which it is not. It is disabled. Question: Is there a workaround to have two wireless printers on the same network, and if so, what is it? Thank you so much for your help.

Hi,
I actually have 3 printers from 3 vendors on my home network. I have tested using MAC filter and w/o MAC filter, no problem at all. The MAC filter should be on the router, not from your computer. Have you checked that ? My suggestion: use a computer on the network to connect the printer using USB cable then setup from there. The printer will use EXISTING setup from your computer and you won't need to enter security key.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Wireless and network script restart

Similar Messages

Maybe you are looking for