Wireless Antenna for Mac Pro G5

Hello
Looking for a wireless antenna for a mac pro that i have, any ideas on where you can buy one and how successful they are?
Many thanks
Dan

Hi Dennis3737,
Welcome to the HP Forums.
I see that you are having an issue with connecting the printer to your Mac over wireless. Just so you are aware, the printer is not supported on the operating system you are using, however I have found a post on the HP Forums that will assist you with getting connected.
Please click on the following link that is provided by JERENDS.
I hope this is helpful. If you have any other questions, please feel free to write me back at any time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Wireless setup for Mac Pro OSX 10.9.4 for HP Deskjet 3054 J610

HP Deskjet 3054 J610, need to know how to set it up on a wireless network. The HP installer disk I have says this verison not supported. I cannot find a newer version.
The printer worked on old Imac and a different network. The network now is a Verizon jetpack 4G LTE and a Mac Pro Laptop. USB connection does work.
I have reset the printer to defalt. However I am unable to find a way to tell the printer what network to use. The Apple printer software does not give me a way to do this.

Hi Dennis3737,
Welcome to the HP Forums.
I see that you are having an issue with connecting the printer to your Mac over wireless. Just so you are aware, the printer is not supported on the operating system you are using, however I have found a post on the HP Forums that will assist you with getting connected.
Please click on the following link that is provided by JERENDS.
I hope this is helpful. If you have any other questions, please feel free to write me back at any time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Which Wireless Card for Mac Pro 2.93ghz (4.1)

Hi,
I would like to add a wireless card to my Mac Pro 2.93ghz (4.1)(early 2009) but im a little unsure of which card is compatible, after searching on the net for info I have these model numbers - Airport Extreme MB988Z/A or MB988ZM/A.
Many thanks,
Antz

I have an Early '08 Mac Pro running an 8800GT in Slot 1 and a 2600XT in Slot 2.
I got my 2600 for $50 USD and have found it to work very quietly and without fuss. It's 3D performance is a little lacking but I didn't buy it for that.
It installed straight into Slot 2 and requires no additional power cable. I've also the above setup running four 23" Apple Cinema Displays without breaking a sweat.
As for your 7300 predicament, for all intensive purposes, this card does not have an the correct internal ROM required to boot an Early '08 Mac Pro. Whilst I've not tested it, I've no reason to doubt well-informed comments from other members:
http://discussions.apple.com/message.jspa?messageID=8636877#8636877
Best, R.

Printer wireless for Mac Pro and I pad.?

Need to get a printer wireless for Mac Pro also can be use with the IPad this is possible? Thank you

Any of the current HP e-Print capable printers support AirPrint capabilities without even having to enable the e-Print stuff that's purely HP.
Also, make sure your exisiting network router at home supports multicast protocols. The majority of retail routers support this and you won't have issues, but I've run into problems with carrier issued modem/router combo units from Comcast made by Arris that don't support multicast and other protocols and hence, will not allow for the necessary discovery protocols for AirPrint to work across the wired or wireless network. In cases like that, the fix is to place those units in "bridge mode" and then use your own router behind it that doesn't restrict that capability. Just FYI.

GeForce 7300 GT Upgrade Kit for Mac Pro?? G5?

Hi,
Just found this on the apple store:
http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=1643C421&nplm=M A567
"NVIDIA GeForce 7300 GT Graphics Upgrade Kit for Mac Pro"
Why is it only for mac pro? its PCI express & my g5 is one of the late 2005 models and it has PCI Express so am i wrong in thinking that this should work fine or is it something to do with the new intel architecture?
If i remember correctly i could have chosen this card or a very similar one when i configured my G5.
Thanks

That card is only for the Mac Pro, as it says.
When you ordered your G5, you had the choice of the nVidia 6600 (or 6600LE), nVidia 7800GT, or the Quadro FX 4500.
The 7800GT that you could have ordered with your G5 is close in performance to the ATi X1900XT that is an option on the Mac Pro. The 7300GT that you're looking at is an entry level card, which the 7800GT definitely is not.
The 7300GT and the X1900XT are both Mac Pro only due to the ROM on the card, which is designed to work with the EFI booting hardware that the Mac Pro uses. The G5s used Open Firmware, which requires a different ROM on the video card. So, even though both your G5 and the Mac Pro are PCI-Express based, these video cards are not compatible.
Now, most PCI-Express cards that you look at for, say, external SATA, will probably work in both the G5 and the Mac Pro. You'd still want to check the specs to be sure, however.
If you're looking for a new video card to replace your (presumably) nVidia 6600, your only real option is the ATi X1900 G5 edition. This is a different card than the X1900XT that's offered for the Mac Pro.

ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
from: http://en.wikipedia.org/wiki/HDMI
You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

"fire wire" video capture cards for mac pro

....Have Power Mac ver. 10.9.5 system Maverick w/ 4 MB RAM & am trying to locate hardware for:
acquiring "FIRE WIRE" video capture cards for mac pro.... ? Any suggestions....?(Just purchased Adobe CS 5 premium)

Your question doesn't make much sense.
What type of Mac Pro do you have? Is it the new black cylinder or the old style silver tower?
Firewire is built-in to the old models & the new Mac Pros can use Thunderbolt to Firewire converters to capture from Firewire sources.
Maybe like this http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
Many older cameras used Firewire for capturing, but that has been replaced by other connection types. What are you trying to capture from?

Reviews for ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro?

There's no review at the Apple Store on this [ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro (Early 2009 or Early 2008)|http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=NDE4NDMx OA]. Googled and found nothing related to the Mac kit. Mostly PC based.
Should I consider this card? I need a spare/replacement graphics card for my Mac Pro (early 2008). The NVIDIA GeForce 8800 GT card has failed me twice.

Just came out on barefeats:
http://www.barefeats.com/nehal14.html
Shows new drivers with 285, also compares 4870.
If you play a lot of games on the windows side, you might also want to consider the 4890. I has recently became flashable (if you're into that kinda thing). It has a lot more leeway to be overclocked. Close to (or if your lucky) hitting the 1 Ghz core clock speed, gives very close comp to the 285, and at fraction of the price. You can get an XFX 4890 on newegg for $195.

Accessories for Mac Pro

Hi, guys. I have a problem here. I am looking for something that can protect against dust or something like that. Because my room is really not that clean, which means there's a lot of dust. I am worrying about the Mac Pro that will "eat" some dust. Question is " Where can I buy that kind of accessories for Mac Pro, like clothing or case?"
Thanks a lot. Oh, I forget there is also a LED cinema display that need to be protected

Clean your room. Nah, J/K
(no, but seriously...clean your room)
Here are some neat looking ACD covers.
http://www.radtech.us/Products/iMacDesktop/
I guess you could also use this: (temporarily)
http://www.flickr.com/photos/neilchristie/3515875014/

What is the best software for home office for mac pro ?

What is the best software for home office for mac pro ?

Mac-HaBu X 12.2.0.3.841
Gnucash 2.4.11
QuickBooks Pro 2013 14.0.3 R4
MoneyWorks Gold 6.1r5
MoneyWorks Express 6.1.r1

Is AirPlay Mirroring available for Mac pro?

Is AirPlay Mirroring available for Mac pro?
Need to share my MAC screen with apple TV display and eliminate the cable.

It's a glaring omission in my view, but Apple's focus seems to be on phones and tablets not OS X.
Send some feedback:
http://www.apple.com/feedback/appletv.html

Where can I find internal DVD replacement for Mac Pro 2008?

My optical DVD drive on my Mac Pro (3,1) has been dead for a good long while.
Looking for a cheap replacment. Just saw OWC stopped carrying them. Any leads?

For Mac Pro 3,1 and earlier (2008 and previous) you need an IDE/ATA drive like this one:
http://eshop.macsales.com/shop/superdrive/Mac_Pro_Xeon

Does it exist a wireless scanner for mac 10.8 ?

does it exist a wireless scanner for mac 10.8 ?

There is no Airscan :-)
but you can scan wirelessly on any your OS compatible network scanner of MFP printer with a scanner.
This has to be connected to your network either via WiFi or Eth cable.

Is it possible for Mac Pro 724 Windows xp to install?

Is it possible for Mac Pro 724 Windows xp to install?

I really don't like any "closed" or sealed technology.
About half way down the page are bare 2.5" enclosures for $50 range
http://eshop.macsales.com/shop/firewire/add-ons-and-hubs/enclosure-kits
http://eshop.macsales.com/shop/firewire/on-the-go
Grief! Yes, that is costly "solution" I looked on Amazon for USB2 for SATA drives and $40.
For that kind of price, MacGurus specializes in some hot-swap FW/USB/eSATA cases so you can use it with multiple drives (giant floppy).

Wireless printer for mac OSX 10.7.4 any recommendations

what is a good wireless printer for mac POC 10.7.4,having problems with hp 3050A

Hello Flajack,
Thanks for the post. I did some checking here and the HP 3050a is compatible with MAC OS 10.7 in a wireless environment. What kind of issues are you having? Installation? Connectivity? Maintaining a wireless connection? I've included a couple of my favorite links below to assist in getting this resolved. Check the information in these links and let me know how it goes from there. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02105426&tmp_task=prodinfoC ategory&cc=us&dlc=en&lang=en&lc=en&product=5061082#N315
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en &product=5061082&tmp_track_link=ot_search#N4595
I work for HP but my posts and replies are my own....Thank you!

Wireless Antenna for Mac Pro G5

Similar Messages

Maybe you are looking for