Wireless AP 1262 getting packet drops whille buffering videos for 18 users.
Hi Team,
Please help for this issue
We are having 1262 Access point model and we are getting packet drops when 20 users are connected and users do Video streaming and buffering online.
Even our AD IP address also getting packet drops during the users are connected and using youtube or someother video sites.
Please help on this issue.
Best regards,
Arun
Well if you have 802.11n enabled and also have 802.11n capable devices, then you would have max of 144mbps on the 2.4ghz and up to 300mbps on the 5ghz with 40 MHz channels. If you are using 20mhz on the 5ghz you will have the same as the 2.4ghz which is again 144mbps.
So if you have clients working fine on the 5ghz and its set to 20mhz, then I would look at interference on the 2.4ghz. See if your SNR is low as that will identify a poor 2.4ghz spectrum.
Sent from Cisco Technical Support iPhone App
Similar Messages
-
Where do I get all SAP WM transaction codes for user acceptance test ?
Hello experts,
Where do I get all SAP WM transaction codes for user acceptance test during cutover activities?
I need the list of transactions.
Thanks in advanceHi,
You can download through Solution Manager also. If ASAP is installed in your computer, you can download all the standard transactions, otherwise let me know your id, i will send it to you.
Aktar -
How to set/get the values thru Wedbynpro coding for User mapping fields
Hi All
In system object we have the user mapping fields like District,city,plant,Salesmanager.
now we want to set/get the values of these usermapping fields of system object thru webdynpro coding...
if anybody have sample codes of the same then it would be great help to me
Thanks in advance
Thanks
Trisha RaniHi Kavitha
Thanks for your reply
My requirement is exactly as follows.
1) i have created one portal system object in system administration and also i created usermapping fields in the system object from the usermanagement in system object.
i created the user mapping fields like Plant,SalesManager,District etc.
i also created the system alias name for the same system object
2) Now i came to persoanlize link and mapped the system object to the portal user.
while mapping to the system object we need to enter Mapping userId, Password , once we enter these values and we can also enter the values of usermapping fields which we defined while creating the system object ( for example District,Salesmanager,Plant etc)
once we enter all the values and click on save then these usermapping values to be mapped to the portal user.
3) Now my requirement is , i want to control the usermapping field values thru webdynpro coding for setting/getting the values.
I need sample code of the same.
Please let me know if u need more details on the same.
Thanks
Trisha Rani -
Getting the last succesful logoin date for user
Hi ,
Iwant to write an java application which will take the userid and get the
last sucessful login date.
I used the sap ume apis for this purpose
There is an API getLastSuccessfulLogonDate() in the class IUserAccount.
But it says
Deprecated.
get last sucessful logon date NOTE: This attribute is not automatically updated during login.
link :https://help.sap.com/javadocs/NW04/current/um/index.html
What does "attribute not updated automaticlaly during login implies".
Is there any other method from where i can get this information
Regards
ManojFew things to mention.
I am using SAP Netweaver 2004s
When i run the code
thisUser = userFact.getUser(userid);
IUserAccount userAccts[] = thisUser.getUserAccounts();
System.err.println(" Iterating in for loop ");
for(int i=0; i<userAccts.length; i++)
d= userAccts<i>.getLastSuccessfulLogonDate();
System.err.println(" got date ");
result = d.toGMTString();
I get the following exception
Login date java.lang.NullPointerException
at SecurityLogic.getLastSuccessfulLogonDate(Unknown Source)
at SecurityRemoteObjectImpl0.getLastSuccessfulLogonDate(SecurityRemoteOb
jectImpl0.java:125)
at SecurityRemoteObjectImpl0p4_Skel.dispatch(SecurityRemoteObjectImpl0p4
_Skel.java:186)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl
.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:19
3)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4Se
ssionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSes
sionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRu
nner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:3
7)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.ja
va:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:1
70) -
Drop and create tablespace for users
I am using Oracle 8i. I have created some users and, assigned the default & temporary tablespace to them.
I would like to drop and re-create the temporary tablespace, should I assign the tablespace to users again?
my script for creation of users:
CREATE USER USER01 IDENTIFIED BY ABC
DEFAULT TABLESPACE WEB_DATA
TEMPORARY TABLESPACE TEMPORARY_DATA
PROFILE DEFAULT;Hi,
I would like to drop and re-create the temporary tablespace, should I assign the
tablespace to users again?If temp tbs is not in usage, you can drop and recreate it without reassign. Users keep this one.
Nicolas. -
Cannot export video clips. Get message: "unable to create video for export"
Cannot export video clips from iPhoto to Finder folder. Export fails with message "unable to create video for export: "
The video clips play correctly within iPhoto.
Software: iPhoto version 9.5 on OSX 10.9
Hardware: Retina Macbook Pro 2.3 i7 8GBYes. I have 3,184 video clips in this library. I tested Reveal function by randomly selecting individual video clips and in every case the Reveal in Finder function worked correctly. I also tested this on random selections of groups of video clips and, again, the Reveal function worked correctly in every case.
Some more info that may be relevant:
I have multiple iPhoto libraries. My "main" library is very large (~30,000 files) and is located on an external hard drive (2TB WD) which is connected via USB.
The problem reported here is occuring on that "main" library. I have not opened any other iPhoto library since installing the new release.
While the File>Export function does not work, I have been able to simply copy and paste video clips from iPhoto library to a folder on Mac hard drive. It appears that meta data is copying correctly along with the video content.
I am able to import these copied video clips to iMovie. Meta data is imported along with the video content and I'm able to perform iMovie editing functions on those clips without any problems.
In summary, the File>Export function still fails with the message "unable to create video for export." Copying video clips and pasting them to interim folder seems to be a viable workaround enabling me to extract video clips from iPhoto for import to iMovie. I will run additional tests to see if I can find a pattern to the video files that are being rejected by iPhoto Export function. -
Packet drop when clients moving from one Access point to another
HI All ,
I am new to wireless . I am using WS-SVC-WISM-1-K9 wism module and using 5 Access points . When my clients are moving from one access point to another we are getting packet drops .
Kindly anyone suggest me what all configuration i need to verify on the controller for Proper client roaming so that i can resolve my issues..
Please let me know in case of any explanations requiered .
Thanks in Advance !!!
Regards
AngusFor radius authenticated SSIDs, you need WPA2-aes or wpa1-tkip-CCKM. It depends on what the client supports.
For pre-shared key, any WPA should be decent enough for roaming speed.
If you're on WEP ... no comment.
If you covered the above point, check if it's not a coverage problem. If the 2 APs coverage zone are not overlapping there will be a hole where you don't have signal and logically will have packet drops. -
hi,
After intrgrating with Webcenter site with EClipse using CSDT plugin. When i tries to create a template using eclipse IDE. And when i click on 'Create New Template' icon on eclipse , I am getting error "*** Developer Tools: Reading sites for user: fwadmin returned status: Forbidden"
Thanks,
KumarHello,
Check if your user has correct permission or not.
User must of part of RestAdmin group. Read here- http://docs.oracle.com/cd/E29542_01/doc.1111/e29634/dt_quickstart.htm#WBCSD942
Regards,
Guddu -
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
-
Hi,
Our customer took 30Mbps metro link from us. Even at 17Mbps link utilization they are facing packet drops. Our side policer is implemented for 30Mbps. There are no errors on customer or our interfaces. But I can see exceed packets under 'show policy-map interface' . Used maximum Bc. Does customer required to implement shaping his end with same CIR and Bc.
Regards
Siva KHi Siva,
It is not a mandatory rule that Customer should also have the same CIR configured with shaping.
When Customer have 30 Mbps circuit SLA with Service Provider, he may be able to pump ta line rate from CE side. But on PE side, it will be policied and excess traffic will be dropped.
To avoid Customer's traffic getting dropped at PE, It is advisible to configure shaping at CE side so that the traffic SLA will be maintained without or with less number of packet loss.
Can you post your config and show policy-map interface output with traffic?.
Regards,
Nagendra -
Packet drops on v490 production server..help us
Hello...
We have v490 server with ce0 interface configured.. It gets down frequently & after some packet drops it makes itself up...
Can anybody tell me what could be the reason behind this problem...
I have checked switch & router by changing interface cables, still problem persists...no message on /var/adm/messages.
Thanks in advance
gmrajtry a "snoop -d ce0" and verify messages
also, perhaps the NIC is broken
also, perhaps the duplex/speed of the NIC isn't set correctly (autoneg, forced, fullduplex, halfduplex etc.) and you have to define it with a "ndd -set " -
Packet drops and High CPU on Cisco 3845 Switch
Hello Experts,
We are facing a lot of packet drops in our LAN.
When we try to ping one of the access switches from the CE router, we get the follwoing output:
pdel1799#ping 10.132.136.17 so 10.132.164.1 si 100 re 500
Type escape sequence to abort.
Sending 500, 100-byte ICMP Echos to 10.132.136.17, timeout is 2 seconds:
Packet sent with a source address of 10.132.164.1
Success rate is 98 percent (491/500), round-trip min/avg/max = 1/9/44 ms
pdel1799#
Success rate is 98 percent (491/500), round-trip min/avg/max = 1/9/44 ms
pdel1799#
Some command outputs and show tech of all switches attached from the customer which I have attached.
I have also attached a diagram but the only router''s IP address is correct in the diagram while IP address of switches in the diagram are incorrect. Here are the correct IPs of the switches:
Core Switch : 10.132.139.2
Access Switches:
10.132.136.17
10.132.136.18
10.132.136.29
Apart from packet drops on VLAN 1 we are seeing high CPU utilization on core switch
ingur-msl-coresw#sh processes cpu sorted | ex 0.0
Core 0: CPU utilization for five seconds: 61%; one minute: 45%; five minutes: 47%
Core 1: CPU utilization for five seconds: 63%; one minute: 46%; five minutes: 56%
Core 2: CPU utilization for five seconds: 36%; one minute: 74%; five minutes: 69%
Core 3: CPU utilization for five seconds: 85%; one minute: 69%; five minutes: 65%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
5638 2374911 23863975 131 52.03 52.24 52.58 1088 fed
9227 43623 21191441 182 8.36 5.53 5.71 0 iosd
6146 1437288 13888905 56 0.95 0.68 0.70 0 pdsd
5639 1292905 86276135 11 0.13 0.13 0.11 0 platform_mgr
6161 2831440 20952285 955 0.13 0.12 0.10 0 cpumemd
I can get more details required to resolve this, please help!!Hi,
I can see several Mac Flaps in the logs provided.... i.e. on int gi 1/1/3. have you verified you don't have any bridging loop occurring on the network?
Regards,
Yaseen -
Output packets drops on Router interface
Hi,
As shown in attached diagram we have connected DC and site with two ISP.
RTR1 and RTR2 are in HSRP mode and RTR2 is active router for site
We are seeing packet drops on DC RTR2 interfece connected to Sprint MPLS.
We have a site with two isp (Sprint MPLS and P2P link). Site is running on Sprint ISP.
We are seeing out put errors on DC RTR2 Sprint interface, when we failover site to P2P link from sprint.
And when fail over back to Sprint at site we are not seeing any output packets drops on DC RTR2 sprint link.
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 36/255, rxload 12/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is RJ45
output flow-control is XON, input flow-control is XON
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 1w0d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 82137
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 4722000 bits/sec, 1449 packets/sec
5 minute output rate 14469000 bits/sec, 2088 packets/sec
601690470 packets input, 1836920253 bytes, 0 no buffer
Received 134822 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 134790 multicast, 0 pause input
0 input packets with dribble condition detected
858756749 packets output, 2658785694 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped outSh int
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 36/255, rxload 12/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is RJ45
output flow-control is XON, input flow-control is XON
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 1w0d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 82137
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 4722000 bits/sec, 1449 packets/sec
5 minute output rate 14469000 bits/sec, 2088 packets/sec
601690470 packets input, 1836920253 bytes, 0 no buffer
Received 134822 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 134790 multicast, 0 pause input
0 input packets with dribble condition detected
858756749 packets output, 2658785694 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out -
I have a first generation ipod touch. I use a wireless router to get my internet connection. It is frozen on opening up a website and will not release. Even when I power down and restart it goes back to the same failed connection. Any ideas greatly appreciated. Ray.
- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cookies, cach and history.
- Restore the iPod -
Having dragged 8 photos onto my desktop from iphoto for the purpose of easy addition to an email , I now find that when I dragged them to the Trash bin , they fail to delete.
I get a drop down box with continued blue/ white bars , stating "moving to trash " .
It's now 6 hours and I cannot stop either. Tried to shut down my computer and reboot but it won't let me . I tried turning the power off , but the problem remains .
Any help would be welcome.Hey !
I have found the solution myself !!!
Go ..... Apple in the toolbar - Force quite - select finder - then relaunch .
Brilliant
Maybe you are looking for
-
Howdy all, We have a project which involves creating numerous presentation based SWFs. These SWFs are loaded into a Flex based player. In order to have the audio respond to the stop() command, I have extended the document class (MovieClip) and added
-
My DB has a big table (STATUS_LOG) that contains operational log of 30 hardware devices – each record in this table stores the information about the status of a particular device in a particular point of time. Records are being added to the table all
-
VL10B showing PO's with deleted items
I have an STO Purchase Order and all items are rejected/deleted, but it still shows in VL10B, but since all items are deleted I don't think it should show. Anyone ever experience this or know how to get around it?
-
Keep my LAPTOP Mounted in Finder
I am having this annoying problem. I am frequently in a position of either moving data from my laptop to my desktop or desktop to laptop, or I am in the position of opening files on my desktop that are on my laptop or in the position of saving files
-
SAP SD Case Study /Project
Hi Experts and others, Can anyone please tell me about some good book for case studies or projects on SAP Sales & Distribution that is available in Indian market.